Spectronic Denmark A S 90136040 VHF Radio Transmitter with Repeater functionality User Manual

Download:
Mirror Download [FCC.gov]
Document ID	2442578
Application ID	xG4m0hxwrD4wS9nqHVdz4A==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	111.16kB (1389526 bits)
Date Submitted	2014-11-05 00:00:00
Date Available	2015-05-04 00:00:00
Creation Date	2014-11-11 13:29:59
Producing Software	Adobe PDF Library 10.0.1
Document Lastmod	2014-11-11 13:30:07
Document Title	User Manual
Document Creator	Adobe InDesign CS6 (Windows)

Quick Start Guide
INCA Repeater
The most important thing we build is trust
INCA Repeater Remote Commands
On
N/A
Channel 3
Power Level 3
Off (sleep mode)
N/A
Channel 4
Power Level 4
N/A
Channel 1
Power Level 1
N/A
N/A
Channel 2
Power Level 2
N/A
INCA Repeater Software Configuration
To configure the INCA Repeater software:
1. Connect the INCA Repeater to a computer containing the INCA Repeater Setup Utility software.
2. The power LED will illuminate Orange to indicate the INCA Repeater is receiving power via the USB.
Note: Connecting external power to the INCA Repeater is not required when programming the INCA Repeater. The INCA Repeater is
powered via USB for software configuration.
3. Select the Operating Mode in the Operation Tab - (Repeater, Receiver (RX) only, or Transmitter (TX) only).
Note: The specified operating mode will determine what options and settings are available when configuring the INCA Repeater.
4. Set the Activate Condition in the Operation Tab.
Note: The RSSI activate condition is only available when operating the device in Repeater mode.
5. Set the Audio Path options in the Operation Tab.
Note: Two audio paths exist with-in the INCA Repeater. One for on-site listening (repeater location) and the other for the rebroadcasted
signal. The operating mode determines which configuration options for the audio path are available.
6. Set the required Frequencies, Volume, and Power level in the Main Tab.
Note: If the user is employing the device in Repeater mode the recommended technique is to invert the RX frequencies with the TX
frequencies ensuring the paired TX and RX frequency contains at least 100 MHz of frequency separation between paired channels.
80011422
Sept. 2014 - Version 1.4.1
www.cobham.com/tcs
Quick Start Guide
INCA Repeater
INCA Repeater Software Configuration (continued)
7. Set the Remote Control option in the Remote Tab, if required.
Note: It is possible to control different functions of the INCA Repeater with the X-IDER and/or INCA GM Keyfob, if enabled.
8. Set the Remote Repeat option in the Remote Tab, if required.
Note: It is possible to control installed transmitter(s) by rebroadcasting the remote commands from and X-IDER and/or INCA GM Keyfob
through the INCA Repeater, if enabled.
9. Set additional options in the General Tab, if required.
Note: Refer to the User Manual for additional information on the options available in the General Tab.
INCA Repeater Hardware Setup
To setup the INCA Repeater hardware:
1. Connect an antenna to the ANT RX BNC connector.
Note: This antenna is NOT required when operating the INCA Repeater in TX mode.
2. Connect an antenna to the ANT TX BNC connector.
Note: This antenna is NOT required when operating the INCA Repeater in RX mode.
3. Connect a remote control antenna to the REMOTE BNC connector, if Remote Control or Remote Repeat is required.
4. Connect a 12 V DC power supply to the 12 V DC IN Lemo jack.
Note: Do NOT connect the INCA Repeater directly to AC power. The INCA Repeater supply voltage range is 10.0 V to 15.6 V DC.
Only use the included power supply or an external battery.
5. Connect the required audio in or audio out cables depending on the operating mode configuration.
6. Slide the power switch to the left to turn On the INCA Repeater. In normal configuration, the LED will illuminate green.
80011422
Sept. 2014 - Version 1.4
www.cobham.com/tcs
Quick Start Guide
INCA Repeater
This device is FCC approved and hence compliant to FCC regulations.
Any changes or modifications to the device which are not expressly approved by the manufacturer will
void the compliance and the users authority to operate the device. To ensure safe levels of RF signal
exposure a minimum distance of 50 cm (2 ft) to the antennas must be kept.
FCC ID no.: QKE-90136040
The device is intended for operation with authorized antennas and cables only. Authorized antennas and
cables are:
67002217 Whip Antenna			
67002233 Antenna VHF			
65914003 Antenna Cable			
67002223 Antenna RC
67002234 Antenna Car Mount
65914004 Antenna Cable
Note: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications. Operation of
this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
FCC approval only applies to the VHF version of the INCA Repeater.
80011422
Sept. 2014 - Version 1.4
www.cobham.com/tcs

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:fdd2d84f-36ec-45e0-bdc4-629eda0bfc4f
Original Document ID            : adobe:docid:indd:faa4c232-6f2c-11df-96e5-85bdfd744948
Document ID                     : xmp.id:E8AAC5639E69E4119CEB9280E639703E
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:E7AAC5639E69E4119CEB9280E639703E
Derived From Document ID        : xmp.did:9AF277E91A43E411A2A3AF27C1AF92BC
Derived From Original Document ID: adobe:docid:indd:faa4c232-6f2c-11df-96e5-85bdfd744948
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2014:11:11 13:29:59+01:00
Create Date                     : 2014:11:11 13:29:59+01:00
Modify Date                     : 2014:11:11 13:30:07+01:00
Metadata Date                   : 2014:11:11 13:30:07+01:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CS6 (Windows)

EXIF Metadata provided by EXIF.tools