Speed Dragon Multimedia SPEEDIRU1F PART 15 CLASS B COMPUTING DEVICE PERIPHERAL User Manual
Speed Dragon Multimedia Ltd PART 15 CLASS B COMPUTING DEVICE PERIPHERAL Users Manual
Users Manual
User Manual SE-MANL-IRU1F-M2-EN-1 Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the userâs authority to operate the equipment FCC-Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a communications. However, there is no guarantee that interference will not occur in particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. User Introduction lhis USB irDA adapter aiiows you to establish a wireless gateway for a desktop or laptop PC to transfer data via its USB port, to and frorn a portable device, i.e. cellular phone, PDA, digital camera, or laptop PC, providing the portable device has the same IrDA capability. This adapter is small in size, only about 50 x 18 x 10mm, and the data transfer rate is up to 4Mbls with effective distance of about 1 meter ranqe. Features USB Plug-n-Playcompatibie Fully compliant with USB specificationRev.1.1 Draws power directiy from USBport, no external power sourcerequired Compliant with IrDA specificationV1.4 Maximum operating distancearound 1 meter Support data rate at2.4K-1.75.2Kbps(SIR),576K-1.152Mbps(MIR), and up to 4Mbps (FIR) Low power consumption Dimensionis 50 x 18 x 10 mm Driver support for Windorvs98SE,ME, 2000,XP,XP64,Vista32,Vista64,Mac,WHQL Linux, and WinCE OS. Installation of USB IrDA Before installation 1. adapter of the USB IrDA adapter, Iet us make the following The end users should have the basic knowledge ofinstalling assumptions: an external device and its driver to a PC. If they are not sure about their abilities or have any queries, please call their local dealers immediately, or frnd somebody who are experienced and qualified for assistance. 2. The computer has been properly installed with one of the supported Installing the USB IrDA adapter and its driver under Windows 1. Do not insert the USB IrDA adapter to the comDuter. 2. Start Windows and Utility" 3. Insert the CD, "Drivers 4. Browse to D:\MOSCHIP\MCS7780 Explorer" operating system environment into the CDROM. Drive D is assumed directory with "My Computer" or "Windows utiiities by double click its icon, 5. Execute Setup.exe 6. Select language and press OK to install the driver. 7. Foilow the instructions B. Insert the USB IrDA adapter into any available USB port on the computer. If the USB IrDA to finish installing the drtver. adapter has been inserted onto the computer at this point, unplug and plug it in again. 9. will automatically The Windows detect the USB IrDA adapter as "USB--Infrared adapter" and follow the on screen instruction automatic installation to install its required driver. Always choose when being asked. 10. Now, the USB IrDA adapter is ready to use. To check if the USB IrDA adapter is properly 2. Go to Device Manager Click on the "+" sign of the Infrared 3. A "USB--Infrared 1. installed Devices device should be displayed under this category Adapter" 4. Double click this icon, the Properties 5. Check the Device Status 6. A message of "This device is working menu of this device should appear category under the General ProPerly" should shown Notice: or question mark shown against the USB IIDA adapter or the If there is an exclamation adapter is compietely unrecognized by the system, check the followings 1. If the driver of the USB port on the system is installed properly. 2. The driver for the USB IrDA adapter is instalied straightly according to the procedure listed above the old version drivers and the drivers for other IrDA adapters 3. Uninstall 4. In the worst case the USB IIDA adapter is defective. Contact your local dealer immediately Uninstalling the Windows drivers for the USB IrDA adapter 1. Start Windows 2. Go to Control 3. Double click on Add/Remove 4. Select USB-Infrared 5. Click the Remove button 6. Click the Uninstall Updating Panel Programs icon Device button the drivers The latest drivers are available for download on the following website: http ://lvwrv. dnvers-download. com Search for DL code: DL-O2347O2 from Drivers Ali spec!ficattons and infornation Ail Iogos and tradtnarks Search are subjed to change wtthaut priar not:irc referenterl are the registered trademark of their respective awners This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2) This device must accept any interf erence received, including interference that may cause undesired operation.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Creator : Canon Create Date : 2009:07:11 11:07:21+08:00 Modify Date : 2009:07:20 10:53:22+08:00 Page Count : 3 Has XFA : No Creation Date : 2009:07:11 11:07:21+08:00 Producer : Mod Date : 2009:07:20 10:53:22+08:00 Metadata Date : 2009:07:20 10:53:22+08:00EXIF Metadata provided by EXIF.tools