SpiderCloud Wireless RN310B4L2 SpiderCloud Radio Node User Manual 1

SpiderCloud Wireless SpiderCloud Radio Node 1

Contents

User Manual 1

SpiderCloud® Radio Node - SCRN-310 Hardware Installation GuidePart number: DOC-SCRN-310-HW-01, Rev. 0.1 DRAFTPublished: February 2014®
2FCC StatementsCaution: Any changes or modification cautions to this device not explicitly approved by manufacturer could void your authority to operate this equipment.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum 20 cm between the radiator and your body. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the FCC.Legal NoticeCustomer agrees that the Software, including the specific design and structure of individual programs, and the Documentation are protected by United States and foreign copyright and trade secret laws. Customer agrees not to reproduce, disclose, alter, provide or otherwise make available such trade secrets or copyrighted material in any form to any third party without the prior written consent of SpiderCloud Wireless. Customer agrees to implement reasonable security measures to protect such trade secrets and copyrighted material at least to the extent that Customer protects its own information of a similar nature.The information contained herein is subject to change without notice. Although all information is believed to be accurate at the date of publication, SpiderCloud assumes no responsibility for inaccuracies contained herein. Copyright © 2014 SpiderCloud Wireless, Inc. SpiderCloud Wireless is a registered trademark and SmartCloud a trademark of SpiderCloud Wireless, Inc. All rights reserved.SpiderCloud Wireless408 East Plumeria DriveSan Jose, CA 95134, USAhttp://www.spidercloud.comTel: +1 408 567-9165Email: info@spidercloud.comRevision HistoryRevision Date Summary of Changes0.1 2/19/2014 Initial draft document release
SpiderCloud Wireless, Inc.SpiderCloud Radio Node - SCRN-310 Hardware Installation Guide3 Table of ContentsAbout this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5Radio Node Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Radio Node System Isometric Top View and Bottom View. . . . . . . . . . . . . . . . . . . . . . . . . . 6System Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Frequency Bands of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Size and Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Environmental Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Radio Node Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8Antennas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9The Top-Panel LED . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9Input Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10Select the Radio Node Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11Installation and Mount Bracket Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12Bracket Mounting and Cabling Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Typical Radio Node Mounting Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Installing the Radio Node . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Installing the Radio Node (Method 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13Installing the Radio Node (Method 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15Completing the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Detaching the Radio Node from the Mount Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17Boot Sequence and Services Node Communication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18Radio Node LED Boot Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19Radio Node LED Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20The SpiderCloud Documentation Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22Appendix A UMTS Antenna Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23Appendix B LTE Antenna Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
SpiderCloud Wireless, Inc.Contents 4
SpiderCloud Wireless, Inc. 5SpiderCloud Radio Node - SCRN-310 Hardware Installation GuideAbout this ManualThis guide provides the system specifications of the SpiderCloud® Radio Node 310 (SCRN-310). It includes detailed hardware installation instructions, the boot sequence, and expected LED behavior both during the boot-up and under operating conditions. An appendix shows the radio node antenna patterns. The primary audience for this guide includes network planners, system administrators and installation personnel. It assumes you have knowledge about networking principles, networking configuration, site preparation, powering, and experience in hardware installation and maintenance.System OverviewThe SCRN-310 is an indoor multi-access small cell capable of supporting Universal Mobile Telecommunications System (UMTS) and Long Term Evolution (LTE) radio protocols concurrently in a single platform. The radio node is 3GPP compliant, supporting UMTS Release 7 and LTE Release 9 standards.Each radio node supports:• up to 32 simultaneous UMTS voice and data channels, a peak downlink rate of 21 Mbps and a peak uplink rate of 5 Mbps. • up to 32 active LTE users, a peak download rate of 100 Mbps, and a peak upload of 50 Mbps when used with 20 MHz channel bandwidth.The radio node enables mobile operators to offer dedicated, in-building coverage and capacity for UMTS and LTE services. It is easy to install and connects to the existing enterprise LAN using standard Ethernet cabling or to a dedicated LAN infrastructure deployed for use by the operator. SCRN-310 radio nodes are managed by the SpiderCloud SCSN-9000 services node access controller, typically installed in the enterprise DMZ. Figure 1 Radio Node Relationship to Enterprise and Mobile Operator Core NetworksLAN IntranetDMZEnterprise Mobile Operator CoreEmail WebRadio NodesSGSNMSCIPsecBackhaulIPsecSwitch Firewall SecurityGatewayServices NodeIu-CSIu-PSIPsecHNBGatewayIuhSGWMMEUMTSLTES1-CS1-U3G/LTES1
SpiderCloud Radio Node - SCRN-310 Hardware Installation Guide SpiderCloud Wireless, Inc.6Radio Node FeaturesThe radio node supports the following features:• Complete enterprise mobility using licensed 3G and LTE spectrum• Self Organizing Network (SON) capabilities for autonomous setup, operation, and management• Secure boot• Transparent integration into enterprise network environments• Certificate-based authentication with the SpiderCloud services nodeRadio Node System Isometric Top View and Bottom ViewThe radio node ships with four internal antennas. The following drawings display an isometric top and bottom views of the radio node:Figure 2 Radio Node Top ViewFigure 3 Radio Node Bottom View with Pedestal Base
SpiderCloud Radio Node - SCRN-310 Hardware Installation GuideSpiderCloud Wireless, Inc. 7System SpecificationsFollowing are the system specifications for the radio node frequency bands of operation, system size, environmental requirements, power, and compliance.Frequency Bands of OperationSpiderCloud Wireless currently provides two versions of the SCRN-310 for operation in the following UMTS and LTE band combinations. Note that the SCRN-310 hardware is also capable of supporting two carriers of LTE (feature available in a future software upgrade).• SCRN310-0701— Operates in Band Class 1 (UMTS)— Operates in Band Class 7 (LTE)— Monitors GSM 900/1800 MHz, UMTS 2100/900 MHz, LTE 2600/1800/800 MHz• SCRN310-0402— Operates in Band Class 2 (UMTS)— Operates in Band Class 4 (LTE)— Monitors GSM 850/1900 MHz, UMTS 2100/1900/850 MHz, LTE 2100/700 MHzSize and Dimensions• Height: — 5.3 centimeters (2.1 inches)— 11.3 centimeters including mount bracket assembly (4.4 inches)• Width: 20.6 centimeters (8.1 inches)• Length: 23.9 centimeters (9.4 inches)• Weight: — 1.2 kilograms (2.6 pounds)— 1.41 kilograms with mounting bracket (3.1+ pounds)Environmental Requirements• Operating temperature range: — 0° to 50° C (32° to 122° F) vertical mount— 0° to 40° C (32° to 104°F) horizontal mount, fins up• Operating humidity: 0 to 90% non-condensing• Storage temperature range: 0° to 85° C (-40° to 185° F)• Storage humidity: 0 to 90% non-condensing• Ingress protection rating: IP30
SpiderCloud Radio Node - SCRN-310 Hardware Installation Guide SpiderCloud Wireless, Inc.8PowerThe radio node is compliant with IEEE 802.3at (PoE+):• Power consumption: 23W maximum• UMTS transmitter output power: 1x 250 mW (24 dBm) RMS radio power• LTE transmit output power: 2x125 mW (24 dBm)Compliance•ETSI:— EN 301 489-1— EN 301 489-23— EN 301 908-1— EN 301 908-3— EN 50385— EN 60950-1 (safety)• IEEE 802.3at PoE+• FCC:— FCC Part 15 Class A— FCC Part 24 (UMTS Band II only)— FCC Part 27 (UMTS Band IV only)•CE Marking• NRTL Marking• RoHS (Directive 2002/95/EC on RoHS)• R&TTE (Directive 1999/5/EC on R&TTE)• CB certification as per IEC 60950-1:2011 Radio Node ModelsTabl e 1 displays the orderable configurations of the SCRN-310 radio node: Table 1: SCRN-310 Radio Node ConfigurationsRadio Node Model DescriptionSCRN-310-0701 Dual-mode with internal antennas: LTE Band 7, UMTS Band 1SCRN-310-0402 Dual-mode with internal antennas: LTE Band 4, UMTS Band 2
SpiderCloud Radio Node - SCRN-310 Hardware Installation GuideSpiderCloud Wireless, Inc. 9AntennasThe radio node includes four integrated antennas: two UMTS antennas and two LTE antennas. The UMTS radio operates in 1x2 mode with receive diversity. The LTE radio operates in 2x2 mode with MIMO.Tip: To maximize antenna transmission, SpiderCloud Wireless recommends not installing the radio node inside a metallic enclosure.Ports The radio node has one 1 Gigabit Ethernet port that supports a Category 5e (Cat 5e) or better twisted-pair cable with an RJ-45 connector. Figure 4 shows the Ethernet port. There are two LEDs on the connector:•Link: Steady green state indicates a normal Layer 2 link connection has been established. •Activity: Yellow blinking indicates data activity. Figure 4 Ethernet PortThe Top-Panel LEDThe radio node has one top-panel tricolor LED to indicate power and status. This is the only LED visible under normal operating conditions. When the radio node initially boots the LED cycles through a number of colors and flashing behaviors until it is fully operational. Figure 5 Radio Node Tricolor LEDEthernetPortLink ActivityLED
SpiderCloud Radio Node - SCRN-310 Hardware Installation Guide SpiderCloud Wireless, Inc.10Input PowerThe radio node receives its power from a standard PoE+ switch (typical) or injector. The radio node is fully compliant with the IEEE 802.3at Power Over Ethernet (PoE+) specification.Per IEEE 802.3at, use standard Cat 5e or better twisted-pair cable with a maximum length restriction of 100 meters (328 feet) for PoE+. This restriction minimizes power loss between the PoE+ power source and the radio node.Power is distributed over two pairs of the four available pairs in Cat 5e or better cables. The radio node can accept power on either used or un-used pairs.Figure 6 on page 10 shows the valid radio node cabling/powering options:Figure 6 Valid Radio Node Cabling/Powering OptionsThe illustration below shows a generic single-port PoE+ injector. Use this injector only when a PoE+ Ethernet switch is not available. Figure 7 Typical PoE+ InjectorTo connect the PoE+ injector to a radio nodeStep 1 Attach the injector power cord to a power source.Step 2 Connect an unpowered Ethernet cable from a switch to the IN port on the injector. Services NodePoE+ SwitchOutIn Services NodePoE+ Switch orPoE+ InjectorPoE+ InjectorNon PoE+ SwitchOUT INCONNECT PoEPLUS ON
SpiderCloud Radio Node - SCRN-310 Hardware Installation GuideSpiderCloud Wireless, Inc. 11Step 3 Connect an Ethernet cable from the injector’s OUT port to the radio node. The injector will now inject power onto a pair of wire pairs in the cable. The radio node will expect a nominal 48V DC input (57V max) from a typical PoE+ injector.Select the Radio Node LocationRadio nodes can be installed in a wide range of locations including walls, ceilings, and plenum spaces. Follow the installation guidelines for selecting appropriate mounting locations for the unit. When mounting a radio node vertically, align the bottom-side fins vertically for superior cooling. Figure 8 Radio Node LocationsWhen possible, locate radio node units at least 5 meters (16 feet) from an external wall. This distance maximizes indoor coverage and minimizes RF leakage outside the building. When mounting near a wall or other obstruction, orient the mounting bracket such that the transmit antenna faces towards the coverage area and faces away from the wall. Refer to Bracket Mounting and Cabling Guidelines on page 13 for more information.Dead / Non-CirculatingAirspaceLiving / Working Space of a TypicalCommercial BuildingDrop CeilingWallForced-Air SupplyForced-Air ReturnXX
SpiderCloud Radio Node - SCRN-310 Hardware Installation Guide SpiderCloud Wireless, Inc.12Use Table 2 to determine the maximum distance between radio node units. Greater separation may affect coverage or system performance. Installation and Mount Bracket AssemblyThe radio node has a pedestal base that slides into a long bracket for ceiling or wall mounting. SpiderCloud Wireless pre-bolts the pedestal base onto the extrusion plate on the radio node. However you must attach the pedestal base to the mount bracket as shown in Figure 9: Figure 9 Pedestal Base Slides into Mount BracketTable 2: Recommended Radio Node Separation DistancesType of Building Max Recommended SeparationWarehouses and large open-spaced buildings 70 m (230 feet)Open-plan offices 45 m (148 feet)Closed-plan offices (e.g., individual rooms - plasterboard) 30 m (98 feet)Closed-plan offices (e.g., individual rooms - stone/brick/concrete) 20 m (66 feet)Mount BracketPedestal Base
SpiderCloud Radio Node - SCRN-310 Hardware Installation GuideSpiderCloud Wireless, Inc. 13Bracket Mounting and Cabling GuidelinesIncorrectly cabling and mounting a radio node can result in crushed cables and loss of communications to the unit. Follow these guidelines in cabling the radio node and mounting it on the bracket:• Ensure that the cabling is properly routed and dressed. • Ensure that the pedestal base is fully inserted into the mount bracket so that it locks into place and is flush. A correctly installed cable should at no time during installation impede inserting the pedestal base into the mount bracket. • Secure the pedestal base to the mount bracket with a padlock or tie wrap to provide physical security.• When mounting the radio node vertically, orient the bracket with the open end on top and the closed end on the bottom. Figure 10 on page 14 shows the proper vertical orientation.• When mounting the radio node near a wall or other obstruction, orient the bracket such that the radio node transmit side towards the coverage area. In vertical mountings, this is on the right side of the radio node. Figure 10 on page 14 shows the mounting bracket orientation.Typical Radio Node Mounting OptionsRadio nodes can be mounted on a wide number of surfaces including the following typical surfaces:•Light grill: Use bolts, nuts, and washers to secure the mount bracket using holes in the light grill. Adjust the mounting bracket until the bracket and light grill holes align.•Directly on the wall or ceiling: Use drywall screws to secure the mount bracket directly to sheetrock or plasterboard on the wall or ceiling.•Mud or plaster ring: Secure the mount bracket directly on the wall or ceiling as above with a 3 1/4 inch (8.25 centimeter) mud or plaster ring between the mount bracket and the mounting service and run the Ethernet cable through ring’s hole. •Strutting: Secure the radio node to heavy hanging equipment strutting using strut clip nuts and M8 studding.Installing the Radio NodeThe radio node receives its power source over powered Ethernet. If your wiring closet does not have existing PoE+ equipment, SpiderCloud Wireless recommends a PoE+ power injector for the radio node. See section Input Power on page 10.The Ethernet cable can route openly or directly through a surface such as a wall or ceiling:• Refer to Installing the Radio Node (Method 1) on page 13 for open cable routing installation.• Refer to Installing the Radio Node (Method 2) on page 15 for direct cable routing installation.Installing the Radio Node (Method 1)To route the cable openly and mount the radio nodeStep 1 With two user-provided screws, attach the mount bracket assembly to a wall or ceiling. The screw holes are sized for an M4 (#10) screw. Ensure the screws have a snug fit onto the studs, sheetrock, anchor, or other material you are bolting onto.
SpiderCloud Radio Node - SCRN-310 Hardware Installation Guide SpiderCloud Wireless, Inc.14 Figure 10 Attach the Mount BracketStep 2 Insert the RJ-45 connector into the Ethernet port as shown in Figure 13. Route the Ethernet cable through the cable guides and pedestal base cable opening and through the cable guides as shown in Figure 11: Figure 11 Route and Terminate the CableStep 3 Press the cable into the cable guides until the guides securely snap around the cable. Ensure that there is no cable slack and that there is sufficient cable bend radius. Step 4 Slide the pedestal base of the radio node into the groove opening in the mount bracket. When the pedestal reaches the end of the trough, a spring clip will secure the unit into place. Transmit SideRJ-45 Connector in Ethernet PortCable OpeningCable GuidesSpringClip

Navigation menu