Spotwave Wireless SPOTCELL0003 Spotcell 100 DDU User Manual Installation instructions

Download:
Mirror Download [FCC.gov]
Document ID	228504
Application ID	6Y6/MjcXAt5PJ5M4d2rn9w==
Document Description	Installation instructions
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	7.3kB (91235 bits)
Date Submitted	2002-03-01 00:00:00
Date Available	2002-03-07 00:00:00
Creation Date	2001-09-19 16:02:16
Producing Software	Acrobat Distiller 4.05 for Macintosh
Document Lastmod	2001-09-19 16:02:19
Document Title	Installation instructions

SpotCell™ 100
Quick Installation Guide
www.spotwave.com
Spotwave Wireless Inc. 3701 Carling Avenue, Ottawa ON K2H 8S2 Canada
Tel: (613) 820-0023 Fax: (613) 828-1956 E-mail: sales@spotwave.com
© 2001 Spotwave Wireless Inc. All rights reserved. Printed in Canada
For quick installation of SpotCell 100:
If required, more detailed information on installing
SpotCell 100 can be found in the enclosed Installation
Manual.
2. Location
1. Parts List
• DDU
• SCU
• Cable (80'/25 m)
• Power supply
DDU
(outward-facing unit)
• Mounting kit
SCU
(indoor unit)
For your safety, beware of power lines and ensure that
appropriate safety measures are maintained at all times
The DDU can be mounted anywhere
your cell phone works. This may be on
a rooftop (typical rural set-up), on the
side of a building, or inside a building
(typical downtown set-up). The SCU
will be mounted inside the building
where your cell phone does not work.
(The illustrations at the right depict
typical installations.)
To start the installation, place the
DDU and SCU in the general areas
where they are to be located. Do not
physically mount them at this time.
during the installation of the SpotCell 100 equipment.
Contact with high-voltage power lines could result in death
or serious injury.
3. Installation
4. Installation
5. Installation: DDU
6. Installation: DDU
Connect the DDU and SCU with the cable provided.
Set the switch on the bottom of the SCU to “1” (install).
Connect the power supply to the SCU, then plug the adapter
into the AC outlet.
In the location where the DDU is to be mounted, rotate the
unit in a complete circle. The LED on the back will turn red
or green during the rotation.
Again rotate the DDU. When the LED turns green, stop the
rotation. This is the direction the DDU must face when
mounted.
Back of SCU
Back of DDU
Power supply connection:
insert wires here while
depressing blue tabs here
LED
Switch: install mode
position
Cable connector
Grounding bolt
Cable connector
Rotate 360°
Rotate 360°
7. Installation: DDU
8. Installation: SCU
9. Installation: SCU
10. Final Checklist
Now mount the DDU. Typical installations are pictured below.
Move the switch on the bottom of the SCU to “2” (active).
Hold the SCU in the location to be mounted. The LCD on
the bottom of the SCU indicates coverage by the number
of bars; more bars indicate better coverage.
Mount the SCU from a wall or ceiling, close to the centre
of the area requiring coverage.
1. Properly ground the DDU via the grounding bolt.
Wall Mount
Pipe Mount with Hose Clamp
2. Ensure that there is a drip loop on the cable connecting
to the DDU.
3. Firmly affix the cable to the building where it runs
between the DDU and SCU.
Mounting bracket
Optional bracket

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Create Date                     : 2001:09:19 16:02:16
Producer                        : Acrobat Distiller 4.05 for Macintosh
Modify Date                     : 2001:09:19 16:02:19-04:00
Page Count                      : 2

EXIF Metadata provided by EXIF.tools