Spotwave Wireless SPOTCELL0009 Spotcell 163 IDEN DU User Manual SpotCell QuickStart 23Jun03

Download:
Mirror Download [FCC.gov]
Document ID	394465
Application ID	PxYRr+YZmJxVrQu+cXm7wg==
Document Description	SpotCell QuickStart
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	25.67kB (320842 bits)
Date Submitted	2004-02-05 00:00:00
Date Available	2004-02-05 00:00:00
Creation Date	2003-06-23 11:40:10
Producing Software	Acrobat Distiller 5.0.5 (Windows)
Document Lastmod	2003-06-23 08:16:22
Document Title	SpotCell_QuickStart_23Jun03.cdr
Document Creator	PScript5.dll Version 5.2
Document Author:	Owner

SpotCell ™
Quick Installation Guide
www.spotwave.com
Spotwave Wireless Inc. 1 Hines Road, Ottawa ON K2K 3C7 Canada
© 2002 Spotwave Wireless Inc. All rights reserved. Printed in Canada
Spotwave and SpotCell are trademarks of Spotwave Wireless Inc. Patents pending.
780-00004-01-IST
For quick installation of SpotCell:
If required, more detailed information on installing
SpotCell can be found in the enclosed User Manual.
2. Location
1. Parts List
• Donor Unit (DU)
• Cable (80'/25 m)
• Coverage Unit (CU) • Power supply
WARNING
DU
(outward-facing unit)
• Mounting kit
CU
(indoor unit)
The DU can be mounted anywhere your cell
phone works. This may be on a rooftop (typical
rural set-up), on the side of a building, or inside
a building (typical downtown set-up). The CU
will be mounted inside the building where your
cell phone does not work.(The illustration at
the right depicts a typical installation.)
To start the installation, place the DU and CU
in the general areas where they are to be located.
Do not physically mount them at this time.
For your safety ,beware of power lines and ensure that
appropriate safety measures are maintained at all times
during the installation of the SpotCell 100 equipment.
Contact with high-voltage power lines could result in
death or serious injury.
Maximum separation between the DU and CU,
and back-to-back positioning are optimal when
both are mounted indoors.
3. Installation
4. Installation
5. Installation: DU
6. Installation: DU
Connect the DU and CU with the wrench and cable provided.
Set the switch on the bottom of the CU to “1” (install).
Connect the power supply to the CU, then plug the adapter
into the AC outlet.
In the location where the DU is to be mounted, rotate the
unit in a complete circle. The LED on the back will turn red
or green during the rotation.
Again rotate the DU. When the LED turns green, stop the
rotation. This is the direction the DU must face when
mounted.
Back of DU
LED
Cable connector
Grounding bolt
Cable connector
Switch: install mode
position
Rotate 360°
Rotate 360°
7. Installation: DU
8. Installation: CU
9. Installation: CU
10. Final Checklist
Now mount the DU. Typical installations are pictured below .
Move the switch on the bottom of the CU to “2” (active).
Hold the CU in the location to be mounted. The LCD on
the bottom of the CU indicates coverage by the number of
bars; more bars indicate better coverage.
Mount the CU from a wall or ceiling, close to the centre of
the area requiring coverage.
1.Properly ground the DU via the grounding bolt.
Wall Mount
Pipe Mount with Hose Clamp
Mounting bracket
CHxxx
In Se rvi ce
2.Ensure that there is a drip loop on the cable connecting
to the DU.
3.Firmly affix the cable to the building where it runs
between the DU and CU.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Create Date                     : 2003:06:23 11:40:10Z
Modify Date                     : 2003:06:23 08:16:22-04:00
Page Count                      : 2
Creation Date                   : 2003:06:23 11:40:10Z
Mod Date                        : 2003:06:23 08:16:22-04:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Owner
Metadata Date                   : 2003:06:23 08:16:22-04:00
Creator                         : Owner
Title                           : SpotCell_QuickStart_23Jun03.cdr

EXIF Metadata provided by EXIF.tools