Square SHR1 Card Reader User Manual

Square, Inc. Card Reader

User Manual

1455 Market Street, Suite 600, San Francisco, CA 94103 APPROVALS PROJECT R12 Retail Packaging DELIVERABLE GSG - US INKS 2/2 + OA AQ w/ Bleeds, Heavy Coverage CREATIVE Approved ChangesIMAGING Approved ChangesCOPY Approved ChangesLOCALIZATION Approved ChangesEDITING Approved ChangesLEGAL Approved ChangesREQUESTOR Approved ChangesPRODUCER Approved ChangesDESIGN Eric Manago SIZE Flat: 216mm x 108mm Finished: 108mm x 108mmBLACK  PMS CG7PRODUCTION Jordan Lebrecht STOCK 105g C2SMODIFIED March 21, 2016 4:18 PM FINISHING Die cut, saddle stitch,matte varnishNOTE Pa #: M-LIT-0096-01Previous P/N - M-LIT-0060VERSION M05 QUANTITY XX piecesFILE NAME M-LIT-0096-01_R12+R4_GSG_8-pages_US_M05Contactless + Chip Cards
YOUR CONTACTLESS + CHIP READER Power button Charging poEMV chip card slotIndicator lights
GET UP AND RUNNING 1. ChargeIt’s just like charging your phone. Plug one end of the cable into your reader, and the other end into a computer or USB wall charger. To check if your reader is fully charged, press the power button once. When you see four green lights, you’re good to go. Need help?Watch step-by-step setup videos at square.com/setup.Note:If you use Square Stand or Dock for Square Reader, simply plug in your Square Reader with the included USB cable. 3. ConnectGrab your device. Turn on Bluetooth, usually found in your device’s settings. Open the Square app. Tap (top left) > Settings > Card Readers > Connect a Reader > Contactless + Chip Reader. Still with us? If so, you’ll see the “Pair a Reader” screen. Leave this on. 2. UpdateMake sure you have the latest software for your smaphone or tablet and the latest version of the Square app. (We know updating is a pain, but it’s really impoant.) 4. PairGrab your reader. Press and hold the power button for about three seconds. When four orange lights sta flashing, release the button. A Bluetooth pairing request will then appear on your device. Tap Pair and you’re ready to take payments.
Pro tip:Your reader will go to sleep after a period of inactivity. To wake it up, simply press the power button once. HOW TO TAKE A PAYMENT PUT YOUR BEST READER FORWARD Position your Square Reader so customers can hold their contactless devices near it and you can dip their chip cards. The Dock for Square Reader can help you do this. Learn more at square.com/dock.TapIn the Square app, tap Charge and wait for a single green light to appear on the reader. Your customer can then hold a contactless device or card near the reader to trigger payment. DipIn the Square app, tap Charge and wait for a single green light to appear on the reader. You or your customer can then inse the chip card into the reader. Leave it in place until you see four green lights. SwipeInse the Square magstripe reader into your device’s headset jack. Run traditional magnetic-stripe cards through the magstripe reader.
FREE 30DAY RETURNS Square guarantees a 30-day, risk-free return policy for all purchases made from square.com/shop. After a return is complete, a refund will be credited back to you. HARDWARE PROTECTION If something goes wrong with your reader, you’re covered for up to one year. Simply go to square.com/returns so we can make things right. This device complies with pa 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful inteerence, and (2) this device must accept any inteerence received, including inteerence that may cause undesired operation. © 2016 Square, Inc. Square, the Square logo, Square Reader, and Square Stand are trademarks of Square, Inc. M-LIT-0096-01square.com

Navigation menu