Ssd Company Limited Servo Drive 637F Users Manual
637f to the manual f5ff6d29-f62e-4d35-bcec-3e730436f6a4
2015-02-06
: Ssd-Company-Limited Ssd-Company-Limited-Servo-Drive-637F-Users-Manual-528609 ssd-company-limited-servo-drive-637f-users-manual-528609 ssd-company-limited pdf
Open the PDF directly: View PDF
Page Count: 89
- Servo drive 637f
- Additional Supporting Documentation
- The Most Important Thing First
- Safety Precation
- 1 General Information
- 2 Connector Assignments and Functions
- 2.1 General View of Connections for Compact Device 637f/ K D
- 2.2 Connector Pin Assignments and Contact Functions
- 2.3 Signal Connections
- 2.4 Feedback Sensor X30
- 2.5 Multi-function X40
- 2.6 Digital Interfaces
- 2.6.1 Service Interface - COM1 (RS232)
- 2.6.2 Fieldbus Interface - COM2
- 2.6.2.1 additional In-/Outputs
- 2.6.2.2 Additional CAN-BUS2 Interface
- 2.6.2.3 Module Designs
- 2.6.2.4 Pin assignment for RS232
- with option module RP 232
- 2.6.2.5 Pin assignment for RS422/485
- with option module RP 422, without galvanic isolation with
- 2.6.2.6 Pin Assignment for CAN/DeviceNet
- 2.6.2.7 Pin assignment for Profibus DP
- with option module RP PDP, with galvanic isolation
- 2.6.2.8 Pin assignment for SUCOnet K
- with option module RP SUC, with galvanic isolation
- 2.6.2.9 Pin assignment for Interbus S
- 2.6.2.10 Pin assignment for I/O interface
- 2.6.2.11 Pin assignment for I/O interface
- 2.6.2.12 Pin assignment for I/O interface
- 2.6.2.12.1 DIL – switch position for module RP2CA and RP 2C
- 2.7 Option module RP SBT
- 2.7.1 Safe Stop
- Use of the function Safe Stop
- 2.7.2 Brake control and PTC evaluation
- Use of the PTC evaluationThe PTC connection serves for the
- The isolation evaluation circle ( control electronics corresponds to the basis isolation. I.e. also PTC thermistors (which correspond to the basis isolation) can be evaluated, with
- 3 Operating modes
- 4 Mechanical Installation
- 5 Electrical Installation
- 6 Wiring instructions
- 7 Setting and programming
- 8 Commissioning
- 9 Diagnose und Fehlersuche
- 10 Block circuit diagram
- 11 General Technical Data
- 11.1 Power circuit
- 11.2 Control circuit
- 11.3 Signal inputs and outputs, connection X10
- 11.4 Signal inputs and outputs, connection X120B resp. 120C
- 11.5 Digital control
- 11.6 Digitale communication
- 11.7 Resolver evaluation/transmitter principle
- 11.8 Controllersystem
- 11.9 Analog-Outps
- 11.10 Thermal data
- 11.11 Mechanical data
- 12 Disposal
- 13 Software
- 14 Certificates
- 15 Index
- 16 Modification Record
- Local availability and service support