Star Micronics Tsp200 Users Manual Technical

2015-02-02

• COVER
• INTRODUCTION
• CHAPTER 1 SPECIFICATIONS AND OPERATION
  • 1. General Specifications
  • 2. External Appearance
  • 3. DIP-Switch Settings
  • 4. Using the control panel to adjust the sensors, select the head rank, and set the memory switches.
  • 5. Running a test print
  • 6. HEX dump mode
• CHAPTER 2 PRINCIPLES OF OPERATION
  • 1. Block Diagram
  • 2. Interface
    • 2-1. Interface Types
      • 2-1-1. RS232 interface
      • 2-1-2. Parallel interface
    • 2-2. Data Arrangement and Printing
      • 2-2-1. Arrangement
      • 2-2-2. Thermal printhead
      • 2-2-3. Head current control
      • 2-2-4. Head current control
      • 2-2-5. Head burnout protection
    • 2-3. Feed-Motor Drive Circuit
    • 2-4. Power-On Reset Circuit
    • 2-5. +5V Line Voltage Detector Circuit
  • 3. Printer Mechanism
    • 3-1. Thermal Printhead
    • 3-2. Paper-Feed Mechanism
    • 3-3. Detectors
    • 3-4. Auto-Cutter Drive circuit (on TSP242 only)
• CHAPTER 3 PART REPLACEMENT AND RELATED ADJUSTMENT
  • 1. Upper Case Unit 1
  • 2. Auto-Cutter Unit
  • 3. Printer Mechanism
  • 4. Near-End-Sensor Unit
  • 5. Power Unit
  • 6. Main Logic Board
  • 7. Fuses
  • 8. Thermal-head Unit
• CHAPTER 4 MAINTENANCE AND LUBRICATION
  • 1. Maintenance
    • 1-1. Cleaning
    • 1-2. Checks
  • 2. Lubrication
    • 2-1. Lubricants
    • 2-2. Application Method
    • 2-3. Lubrication Points
• CHAPTER 5 PARTS LIST
  • HOW TO USE PARTS LIST
  • 1. Printer Assembly
    • 1-1. Disassembly Drawing
      • 1-1-1. TSP212
      • 1-1-2. TSP242
    • 1-2. Parts List
  • 2. Printer Mechanism
    • 2-1. Disassembly Drawing
      • 2-1-1. TSP212
      • 2-1-2. TSP242
    • 2-2. Parts List
  • 3. Cutter Unit
    • 3-1. TSP200-120/230
    • 3-2. TSP200-24
  • 4. Wiring Scheme of Printer
    • 4-1. TSP200-120/230
    • 4-2. TSP200-24
  • 5. Main Logic Board
    • 5-1. Circuit Diagram
    • 5-2. Component Layout
    • 5-3. Parts List
  • 6. Power Supple Unit (120VAC/230VAC)
    • 6-1. Circuit Diagram
    • 6-2. Parts List
  • 7. Power Supple Unit (24VDC)
    • 7-1. Circuit Diagram
    • 7-2. Component Layout
    • 7-3. Parts List
  • 8. Paper Near-End Sensor
    • 8-1. Circuit Diagram
    • 8-2. Parts List