SteelSeries ApS GC-00002 Stratus XL Android User Manual

SteelSeries ApS Stratus XL Android

User Manual

SteelseriesAndroidgamepadSpecification
Mode:GC00002
TradeName:STEELSERIES

FeaturesandSpecification
z CompatiblewithAndroid,PC,OSXplatforms
z Withfouractionbuttons
z Displaystring“SteelseriesAndroidXL
z DPad(8direction)
z TwodigitalL1/R1buttons
z Twoanalogtriggerbuttons
z Homebutton
z Forceconnectionbutton
z BATbutton(batterycapacityindicator)
z Two3Dsticks
z FourLEDindicator(orange)
z Powerswitch
z MiniUSBupgradeport(insidebatterycompartment)
z 2*AAbattery
z Power class level: Class 2 (-6dBm < PAV < 4dBm)
MicroUSBupgrademethod
z PlugtheUSBdatacable,thegamepadfourLEDswillbeon&offevery0.25sinturn,indicatingupgrading,
thefourLEDswillbeoffafterupgradecompleted.
z WhenconnectbyBluetooth,theBluetoothdevicenameis“SteelSeriesAndroidXL”;WhenconnectbyUSB
cable,thedisplaystringis“SteelSeriesAndroidXLBootloader
MouseFunction
z Defaultmode:Gamepadmode
z PressandholdL3&R3for3secondssimultaneously,theLEDswillflashinturn1>>2>>3>>4,indicatingthe
gamepadentersmousemode
z Inmousemode,L1equalsmouseleftbutton,R1equalsmouserightbutton.Right3Dequalsmousemove
z PressandholdL3&R3for3ssimultaneouslyagain,thegamepadgoesbacktogamepadmode,andtheLEDs
willbeonfor0.04sandofffor2s.
Note:Undermousemode,whenpoweroffandpoweronthegamepadagain,itwillbeingamepadmode.
SleepMode

z Thegamepadwillentersleepmodeinoneofthefollowingconditions:
1) withoutanyaxisorbuttonmovementin15minutes
2) notconnectedin15minutes
3) notpairedwiththehostdevicein15minutes
z Wakeupmethod
1) EitherDPAD(up,down,left,right),A,B,X,Y, L1,R1,L3,R3,BACK,START,HOME,orBATbuttoncan
wakeupthegamepad,theLEDwilldisplaythebatterycapacityfor3sfirst,andreturntostatusbefore
sleeping.
Lowbatteryalarmfunction&batterycapacityindicator

z Press”BAT”button,theLEDswillbeinoneofthefollowingstatus:
    indicates0%10%battery,the1stLEDwillbeon&offevery0.5sinturn
    indicates10%‐30%battery,the1st&2ndLEDswillbesolid
    indicates30%95%battery,the1st,2nd&3rdLEDswillbesolid
    indicates95%100%battery,the1st,2nd,3rd&4thLEDswillbesolid
z Whennotinlowbatteryalarmstatus,thebatteryindicatingtimewillbe3s,andreturntonormal
connectionstatus.
Note:Whenthebatteryisbelow0%10%,thegamepad1stLEDwillflashon&offevery0.25sfor10times;
Whenthebatteryislowinanystatus,thegamepadwillalarmevery20s;Whenbatterybelow1.8V,thegamepad
willbepoweredoffautomatically.
ForceConnectionMethod

z Ifthegamepadisnotconnectedwiththedevicebefore,it’llenterforceconnectionmodeautomatically
whenpoweron,andthefourLEDswillbeon&offevery0.5sinturn
z Ifthegamepadhasbeenconnectedbefore,it’llonlysearchforandconnectwiththepreviousconnected
deviceswhenpoweronagain,andthefourLEDswillbeon&offevery0.5sinturn
z WhenpressandholdForceConnectionbuttonlessthan5s,firstly,the1st&2ndLEDswillbeonfor1s;
Secondly,the3rd&4thLEDswillbeonforanother1s;Thirdly,thegamepadwillsearchfornewdevices,and
thefourLEDswillbeon&offevery0.5sinturn.Itllconnectwiththepreviousconnecteddeviceafter30s,
andthefourLEDswillbeon&offevery0.5sinturn.
z WhenpressandholdForceConnectionbuttonabove5s;Firstly,the1st&3rdLEDswillbeonfor1s;Secondly,
the2nd&4thLEDswillbeonforanother1s;Thirdly,thegamepadwillremovethepairingrecords,andsearch
fornewdevices,andfinallythefourLEDswillbeon&offevery0.5sinturn.
NOTE:WhenpressForceConnectionbutton,theLEDwillnoton)
z Click“SteelSeriesAndroidXLin“Devices—Bluetoothsettings—Bluetoothdevices”toconnectwiththe
device
z ThefourLEDswillbeonfor0.04s,andofffor2stoindicateconnectionsucceed
Note:Thegamepadsequencewillbeassignedbythegamesoftware
Reconnection

z Ifthegamepadisconnectedwiththedevicebefore,they’llbereconnectedautomaticallyseveralseconds
whenpoweronagain(it’lldisplaythebatterycapacityfor3sfirst)
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 1
5 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a resid
ential installation. This equipment generates and can radiate radio frequency energy and, if not installed and used i
n accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interfer
ence to radio or television reception, which can be determined by turning the equipment off and on, the user is enc
ouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This de
vice may not cause harmful interference, and (2) This device must accept any interference received, including inte
rference that may cause undesired operation.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications
to this equipment. Such modifications could void the user’s authority to operate this equipment.
IC Compliance
This device complies with Industry Canada license
exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interf
erence, and (2) this device must accept any interference,including interference that may cause undesired operation
of the device.
Le present appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et (2)
l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’
en compromettre le fonctionnement.
RF Radiation Exposure Statement
The device has been evaluated to meet FCC and RSS-102 general RF exposure requirement. The device can be
used in portable exposure condition without restriction.

Navigation menu