Strategic Vista Technologies SV-01A-CAM WIRELESS CAMERA-TX User Manual 1

Strategic Vista Technologies Inc. WIRELESS CAMERA-TX 1

USERS MANUAL

ACCESSORY 2.4 GHz 4 CHANNEL COLOR WIRELESS CAMERA SYSTEM QUICK SET UP GUIDE• Wireless Color Camera• Power Adapter• Metal Mounting Bracket and Screws1. UNPACK SYSTEM CONTENTS FROM THEGIFTBOX2. CAMERA CONTROLS & FUNCTIONS1. Attach the stand base to the wall or ceiling where you want to install the camera. Locate a wall stud or ceiling joist and secure bracket using the three supplied screws.2. Attach the camera to the stand and firmly tighten the swivel..3. Attach the camera with the stand to the stand base and firmly tighten the joint knob on the stand base.4. Connect the supplied 9V 300mA DC adapter to the DC IN jack at the rear of the camera and plug it into the electrical outlet. Your wireless camera has both AC or battery option. When using the AC option with rechargeable batteries, your camera willautomatically switch to back up battery feature during a power outage providing you with uninterrupted power to the camera. Thebattery option also provides you the flexibility to move the camera from room to room.WIRELESS CAME RA - AC OP TION ONLY1. Ensure the power switch on the camera is turned OFF.2. Connect one end of the power supply to the DC IN jack located at the back of the camera. Plug the other end into an electrical outletWIRELESS CAMERA - USING RECHARGEABLE BATTERIES1. Insert 8 rechargeable ‘AA’ batteries (not included) into the camera battery compartment. WARNING: TO PREVENT INJURY AND/OR DAMAGE TO THE UNIT, ENSURE THE BATTERIES ARE ALIGNED PROPERLY AND BATTERY TYPES ARE NOT MIXED.2. Ensure the slide switch labeled Recharge/Alkaline is set to the ‘Rechargeable’ setting.3. Carefully slide the batter compartment into the camera4. Ensure the power switch on the camera is turned OFF.5. Connect one end of the power supply to the DC IN Jack located at the back of the camera. Plug the other end into an electrical outlet.BATT ERY COMPARTMENTPOWER ADAPTERWIRELESS COLO R CAM ERASLIDE IN1. L ENS2. MICROPHONEBuilt- in condenser microphon e pr ovidesaudio capability from camera to monitortelevision3. 2.4 GHz ANTENNAHigh gain directional dipole antennasends Audio and Video signa ls to the monit or.5. STAND M OUNT ING SOCKETReinforcement lock for camer a sta nd.6. CHANNEL SELECTOR SWITC HSlide sw itch f or the channel 1-4 selection.7. ON/OFF POWER SWITCHContr ols p ow er to the ca mera. Not e: Please ensure you set the sw itch to theOFF position before plugging theAC adapter into the unit.8. DC IN JACKPlug the 9V(300 mA) AC Adap ter in here.WIRELESS CAM ERA – BATT ERY OPTION3. WIRELESS CAMERA – INSTALLATIONFCC NOTE:THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSEDBY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONSCOULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Image sensorLens Picture elementScanning systemBattery Life (assume 1300mAH)Current ConsumptionScanning frequencySync. systemResolutionMin. illuminationsVideo OutputGamma characteristicsAuto IrisMicrophoneTransmitting frequencyModulationRF out levelVideo Input levelAudio input levelAntennaOper. temperaturePower sourceDimensionsWeightColor CMOSF2.0/f 3.7mm, 92°wide-a ngle lens510 x 492 (Color)2:1 interlace3 Hours (Color)300mA typ. (color)15.734 KHz(H) 59.9Hz(V) ,EIAInternal Synchroni zation380 Lines (Color)2 Lux (Color)1.0Vp-p/75 Ohmr=0.45Electrical Auto IrisShutter sensitivity :1/60-1/100,000Condenser2.4 GHz-2.4835 GHzFM90dBu/V, 3m1.0Vp-p/75 Ohm2.0Vp-p/600 OhmDirectio nal high dipole a nte nna-14º to + 122º F or (-10ºC to + 50 ºC)DC12V 500mA DC Adapter7.3 (W) x4.7 (H) x 11(D ) cm o r2.8’ (W) x 1.85’ (H) x 4.3’ (D)118 grams or 3.79 OzACCESSORY 2.4 GHz 4 CHANNEL COLOR WIRELESS CAMERA SYSTEM Manual4. WIRELESS CAMERA - SPECIFICATIONS

Navigation menu