Sturgill and PINONE Pins Collective User Manual 15 PIN ONE UserMan r1

Sturgill & Co. AB Pins Collective 15 PIN ONE UserMan r1

15_PIN ONE UserMan r1

Basic usageThe basic usage and interaction with pin ONE.Written by Kristoffer Eriksson Updated in the last 15 minutesTurn on and off Hold the power button on the left side of the pin for 3s to turn the pin on and off.Toggle backlight The backlight of the pin can be toggled in 3-levels by clicking the power button.Pair Before usage the pin needs to be paired to the phone. Download one of the apps and follow theinstructions to pair your phone with your pin.Unpair The pin can only be paired to one phone at a time. If you want to use the pin with a new phoneyou can remove that last pairing by having the pin turned on and hold the power button for 15suntil you see the paring message.Charing The pin is charged via MicroUSB. Connect the USB cable to a transformer or computer andconnect the MicroUSB end to your pin. The pin is fully charged in about one hour.Display e-label Click the power button quickly 5 times to display the devices e-label.Forced power off In the rare occasion that the pin freezes you can force it to turn off by holding the power buttonand connecting the MicroUSB cable.Factory reset (use with care) The pin can be reseted to factory settings by holding the power button for 30s (until a factoryreset artwork appears). This removes all the data on the pin and should only be used as a lastresort if everything else fails.Go to Pins CollectiveSearch for answers...Pins Collective Help Center All Collections Pin ONE Basic usage
INFORMATION ABOUT PIN ONEFCC AND IC INFORMATION:Any Changes or modifications notexpressly approved by the partyresponsible for compliance could voidthe user’s authority to operate theequipment.This device complies with part 15 ofthe FCC Rules. Operation is subject tothe following two conditions: (1) Thisdevice may not cause harmfulinterference, and (2) this device mustaccept any interference received,including interference that may causeundesired operation.Note: This equipment has been testedand found to comply with the limitsfor a Class B digital device, pursuant topart 15 of the FCC Rules. These limitsare designed to provide reasonableprotection against harmfulinterference in a residentialinstallation. This equipment generates,uses and can radiate radio frequencyenergy and, if not installed and used inaccordance with the instructions, maycause harmful interference to radiocommunications.However, there is no guarantee thatinterference will not occur in aparticular installation. If thisequipment does cause harmfulinterference to radio or televisionreception, which canbe determined by turning theequipment offand on, the user isencouraged to try to correct theinterference by one or more of thefollowing measures:- Reorient or relocate the receivingantenna.- Increase the separation between theequipment and receiver.- Connect the equipment into anoutlet on a circuit different from thatto which thereceiver is connected.- Consult the dealer or an experiencedradio/TV technician for help.This equipment complies with FCC RFradiation exposure limits set forth for
an uncontrolled environment. Thistransmitter must not be co-located oroperating in conjunction with anyother antenna or transmitter.FCC ID: 2ANO7-PINONEIC: 23202-PINONEISEDC WARNING:This device complies with Innovation,Science, and Economic DevelopmentCanada license-exempt RSSstandard(s). Operation is subject tothe following two conditions:1. this device may not causeinterference, and2. this device must accept anyinterference, including interferencethat may cause undesiredoperation of the device.Radio apparatus containing digitalcircuitry which can function separatelyfrom the operation of a transmitter oran associated transmitter, shallcomply with ICES-003. In such cases,the labelling requirements of theapplicable RSS apply, rather than thelabelling requirements in ICES-003.Cet appareil est conforme à la (aux)norme (s) RSS exempte de licenced'Innovation, Science etDéveloppement économique Canada.Le fonctionnement est soumis auxdeux conditions suivantes:1. cet appareil ne doit pas causerd'interférences, et2. cet appareil doit accepter touteinterférence, y compris lesinterférences pouvant provoquer unfonctionnement indésirable del'appareil.Les appareils radio contenant descircuits numériques qui peuventfonctionner séparément dufonctionnement d'un émetteur oud'un émetteur associé doivent êtreconformes à la norme ICES-003. Dansde tels cas, les exigences d'étiquetagedu RSS applicable s'appliquent, plutôtque les exigences d'étiquetage de lanorme ICES-003.
Warning:This Class B digital apparatus complieswith Canadian ICES-003.The device has been tested andcompliance with SAR limits, users canobtain Canadian information on RFexposure and compliance.CE INFORMATION:Model: Pin ONEOperating Temperature: 0-40 °CCharging Temperature: 5-35 °COperating Frequency: 2402-2480MHzInput: 5V DC 200mAMax output power: < -5dBmThis device contains a built in lithiumbattery, 3,7V, 150mAh.EU REGULATORY CONFORMANCEHereby, Sturgill & Co. AB declares thatthis device is in compliance with theessential requirements and otherrelevant provisions of Directive2014/53/EU.For the declaration of conformity, visitthe Web site [www.pinscollec-tive.com/eu-conformity.]E-LABELE-label is displayed by pressing thepower button quickly 5 times whenthe pin is turned on.CONTACT INFORMATION:Sturgill & CO ABFolkungagatan 44,118 26 Stockholm,SwedenEU Regulatory ConformanceHereby, Sturgill & CO AB declares that thisdevice is in compliance with the essentialrequirements and other relevant provisions ofDirective 2014/53/EU.For the declaration ofconformity, visit the Web sitepinscollective.com/certification.Online manual is available atpinscollective.com/manual

Navigation menu