Subaru 2010 Tribeca

2015-10-24

: Subaru Subaru-2010-Subaru-Tribeca-819152 subaru-2010-subaru-tribeca-819152 subaru pdf

Open the PDF directly: View PDF .
Page Count: 59

Download
Open PDF In Browser	View PDF

Foreword
This booklet is a supplement to the Owner’s Manual for SUBARU
B9 TRIBECA and contains a detailed description and instructions
for proper operation of the Rear Seat Entertainment System provided in your vehicle.
To ensure optimum and correct use of your Rear Seat Entertainment System, please read this supplement and get acquainted with
the system before using it.
Please keep this supplement together with your Owner’s Manual
and leave it in the vehicle at the time of resale. The next owner will
need the information it contains.
FUJI HEAVY INDUSTRIES LTD., TOKYO, JAPAN

is a registered trademark of FUJI HEAVY INDUSTRIES LTD.
© copyright 2006 FUJI HEAVY INDUSTRIES LTD.

Contents
Safety Warnings ............................................................ 3
Before Use ..................................................................... 4
System Components .................................................... 5
Basic Operations ........................................................... 6
What You Can Enjoy with Your Rear Seat Entertainment
System ........................................................................... 6
Display ................................................................................. 7
How to open and close the display ........................................7
Keeping the display clean ......................................................9

Remote Control .................................................................. 10
Control buttons and joystick .................................................12
How to use the remote control .............................................14
Replacing the battery ...........................................................16

Wireless Headphones ........................................................ 18
Replacing the batteries ........................................................20

DVD Player ........................................................................ 22

Precautions to Observe When Handling Discs ........ 23
Types of Discs Playable with the Rear Seat Entertainment
System ......................................................................... 23
DVD video discs ..................................................................25
Copyright .............................................................................26

Playing Discs ............................................................... 27
Playing DVD Video Discs .................................................. 27
Starting playback .................................................................27
Stopping playback ...............................................................27
Pausing ................................................................................27
Fast-forwarding ....................................................................28
Fast-reversing ......................................................................28
Skipping chapters forward ...................................................29

Skipping chapters backward ................................................29
Title search ..........................................................................30
Skipping to a predetermined screen ....................................31
Displaying each disc’s menu on the screen .........................31
Changing the audio language ..............................................32
Changing the subtitle language ...........................................33
Image angle selection on multi-angle recorded scenes .......34
Selecting a dynamic range control setting ...........................35

Playing Video CDs .............................................................36
Starting playback .................................................................36
Stopping playback ...............................................................36
Pausing ................................................................................36
Fast-forwarding ....................................................................37
Fast-reversing ......................................................................37
Skipping tracks forward .......................................................38
Skipping tracks backward ....................................................39
Skipping to a predetermined screen
(Ver 2.0 video CD only) .......................................................39
Sound channel (MAIN/SUB) selection .................................40

Playing Music CDs .............................................................40
Starting playback .................................................................40
Stopping playback ...............................................................40
Fast-forwarding ....................................................................41
Fast-reversing ......................................................................41
Skipping tracks forward .......................................................42
Skipping tracks backward ....................................................42
Repeat playback ..................................................................43
Random playback ................................................................43
Scan ....................................................................................44

Contents
Initial Settings ..............................................................45
Setting DVD/Audio/Subtitle Language ............................... 46
Setting the Angle Mark Display ......................................... 47
Setting the Viewer Restriction Level .................................. 48
Password registration .......................................................... 49

Connecting External Devices to Your Rear Seat
Entertainment System ...........................................50
Adjusting Display Conditions and Selecting Display
Mode ........................................................................51
Display Condition Adjustment ............................................ 51
Adjusting method ................................................................. 51

Display Mode Selection ..................................................... 52
Selecting method ................................................................. 53

Error Messages ...........................................................54
Language/Code List ....................................................55

Safety Warnings
You will find a number of WARNINGs, CAUTIONs and NOTEs in this supplement.
These safety warnings alert you to potential hazards that could result in injury to you or others.
Please read these safety warnings as well as all other portions of this supplement carefully in order to gain a better understanding of
how to use your Rear Seat Entertainment System safely.

A WARNING indicates a situation in which serious injury or death could result if the warning is ignored.

A CAUTION indicates a situation in which injury or damage to your vehicle including the Rear Seat Entertainment System,
or both, could result if the cautions is ignored.

NOTE
A NOTE gives information or suggestions how to make better use of your Rear Seat Entertainment System.

Before Use
y Never try watching videos or using other entertainment programs with your Rear Seat Entertainment System by keeping
the vehicle engine running in a garage or other enclosed area. Exhaust gases accumulated in such an area or entering
the vehicle are dangerous, or even lethal.
y The driver must not attempt to operate or watch the Rear Seat Entertainment System while the vehicle is in motion. Doing
so will distract attention from driving and the road, and could lead to an accident.
y The driver must not use headphones. Wearing headphones shuts out or drowns out outside sounds and reduces the
driver’s awareness of dangerous situations, which increases the risk of having an accident.
y If you wish to park your vehicle and enjoy an entertainment program on this system, select a safe place that does not
hinder traffic and has no parking ban.

The display, a component of the Rear Seat Entertainment System, contains mercury. For that reason, it is necessary to
remove display before vehicle disposal. Once removed, please reuse, recycle or dispose of the display as hazardous
waste.

NOTE
y Using the Rear Seat Entertainment System with the engine stopped could lower the battery’s electricity level. If the initial
charge level were too low, the next engine starting would be impossible. It is recommended that the system be used only
when the engine is running.
y The display screen turns off if you start the engine while using the Rear Seat Entertainment System with the ignition switch
in the “ACC” or “ON” position and the engine not in operation. To turn on the display again, press the “DVD • CD” button
on the remote control. The image will re-appear on the screen.
y Liquid-crystal displays may be difficult to read when wearing polarized glasses.

System Components
The Rear Seat Entertainment System
consists of the following components:
4

1)
2)
3)

Display (Refer to Page 7.)
DVD player (Refer to Page 22.)
External device jacks (Refer to Page
50.)
Accessory power outlet (Refer to
Page 50.)

In addition to the components listed
above, there is a remote control and two
sets of wireless headphones as attachments to the system.

S00100

Basic Operations
What You Can Enjoy with Your Rear Seat Entertainment System
y The Rear Seat Entertainment System is designed to provide your vehicle’s rear-seat passengers with video and music entertainment
programs recorded on DVD video discs, video CDs and music CDs.
y The Rear Seat Entertainment System will operate when the ignition switch is in the “ACC” or “ON” position.
y Playback sounds can be listened to by using the wireless headphones accompanying the system.
y All operations with the Rear Seat Entertainment System can be managed using the remote control accompanying the system (except
when ejecting a disc).
y Replacements of the dedicated headphones and remote control are available from your SUBARU dealer should you lose them.
y You can also enjoy TV games from a home-use TV game machine or video programs from a video tape player with the Rear Seat
Entertainment System if such an external device is connected to one of the external device jacks of the system. For further details,
refer to the instruction manual provided by the manufacturer of each external device.

NOTE
y When the vehicle is parked with the parking brake applied and the selector lever in the “P” position, you can enjoy video
programs on the navigation display on the dashboard if you press the “AUDIO” button on the navigation control panel.
This does not apply when the vehicle is in motion.
y If you press the “AUX/RSE” button on the audio panel, playback sounds from this system will be outputted through the
vehicle’s speakers.

Basic Operations

Display
How to open and close the display
Push the release button to open the display.
The display will swing down partway along its full swing angle.
1

S00101

1) Release button

Basic Operations
Adjust the display to the desired angle.

S00102

To close the display to its storage position, swing and push it up until it locks.

Close the display when it is not in use to help reduce the chance of injury
in the event of an accident or sudden stop.

S00103

Basic Operations

Keeping the display clean
Do not touch the display screen with bare hands. The display screen is easily soiled with hand grease.
Use a soft, dry cloth to clean the display screen surface. Do not use organic solvents.
The screen surface is sensitive to scratches or other physical damage. Avoid pushing on it strongly or rubbing it with a hard cloth or
any other scratchy material.

NOTE
y The screen is made of a liquid crystal display (LCD) panel. When the system is turned on in an extremely low outside temperature, the LCD takes a relatively long time to become bright. On the other hand, when the outside temperature is high,
the LCD may become darker than usual. Both conditions are normal.
y Images on an LCD screen may contain some tiny black spots and/or bright spots. They reflect a characteristic normal to
the LCD and do not indicate any abnormal condition.

Basic Operations

Remote Control
The Rear Seat Entertainment System can be operated only using the remote control
(except when ejecting a disc). Touching a switch on the display screen directly with
your finger does not have any effect.

S00114

1) Remote control

S00116

1) Remote control

y Store the remote control in the center or rear console box when the Rear
Seat Entertainment System is not being used to reduce the chance of injury in case of an accident or sudden stop.
y Be sure to keep the rear console box as well as the upper compartment
of the center console box closed to reduce the chance of injury in case
of an accident or sudden stop.
y Do not disassemble or modify the remote control. Doing so could cause
an accident, fire or electric shock.
y Do not expose the remote control to direct sunlight, strong heat and/or a
highly humid environment. The remote control case could become deformed and the battery in it could leak or even explode if exposed to
these conditions.
y Avoid dropping the remote control and hitting it against hard objects.
y Do not sit or step on the remote control. Placing anything heavy on it
should also be avoided.
y Avoid pressing the remote control buttons for longer than necessary, as
the battery is consumed while any button is kept pressed. Also avoid
placing an object on the remote control, as it may press buttons and reduce the battery life.

Basic Operations
2

To use the remote control, direct its signal-emitting eye toward the signal reception
window of the display.

S00104

1) Signal emitting eye
2) Signal reception window

Basic Operations

Control buttons and joystick
1

2)
20

6)
7)

S00105

DVD • CD button
When this button is pressed, the Rear Seat Entertainment
System turns on. The display will show DVD mode or CD
mode.
VIDEO button
When this button is pressed, the system will accept and operate on the video signal from an external video device connected to the system.
OFF button
When this button is pressed, the Rear Seat Entertainment
System turns off.
CURSOR button
When this button is pressed, control switches will appear on
the display when the player is in operation.
Joystick
The joystick is used to highlight a control switch or a menu
item on the screen and also to make an entry. Click an appropriate one of its four arrow-marked ends ( , ,
and
) to use it.
ENTER button
When this button is pressed, the system will execute a selection or entry that was made with the joystick.
TOP MENU button
When this button is pressed, the title selection screen for the
DVD video disc currently in the player will appear on the display.
SETUP button
When this button is pressed, the initial setup screen will appear on the display, where you can make your initial settings.

Basic Operations
9)

10)

11)
12)

13)

14)

15)
16)

AUDIO button
When this button is pressed, the desired audio language or
MAIN/SUB sound channel can be selected when the player
is in operation.
SEARCH button
When this button is pressed, the title search screen will appear on the display when the player is in operation. You can
then start playback beginning with the title you have selected
on the screen.
DISPLAY MODE button
When pressed, this button allows you to select the screen
size.
DISPLAY button
When this button is pressed, the display condition adjustment screen will appear, where you can adjust the brightness, contrast, color and tone for images.
ANGLE button
When this button is pressed, the angle selection screen will
appear, where you can select a desired angle when the player is reproducing a multi-angle recorded DVD video disc.
SUBTITLE button
When this button is pressed, the subtitle language selection
screen will appear, where you can select a desired subtitle
language when the player is playing a DVD video disc.
RETURN button
When this button is pressed, the disc will skip to a predetermined screen.
MENU button
When this button is pressed, the menu screen will appear for
the DVD video disc currently in the player.

17) TRACK ( ) button
Each brief push (less than 1 second) of this button during operation of the player advances the video scene chapter by
chapter. If you push the button continuously, the scene advances continuously and quickly (but slowly when playback
is in pause mode) until you release the button.
18) TRACK ( ) button
Each brief push (less than 1 second) of this button during operation of the player reverses the video scene chapter by
chapter. If you push the button continuously, the scene reverses continuously and quickly (but slowly when playback is
in pause mode) until you release the button.
19) STOP ( ) button
This button stops playback when it is pressed during operation of the player.
20) PAUSE • PLAY (
) button
Pressing this button pauses playback when the player is in
operation. Pressing it again restarts playback.

Basic Operations

How to use the remote control
You can control the operation of the DVD player using the buttons on the remote
control.
You can also control the player using the joystick on the remote control to highlight
a switch on the display screen and then pressing the “ENTER” button. You cannot,
however, control the player by touching a switch on the screen with your finger.
When a switch is selected with the joystick, the color of the switch changes from blue
to white. When you then press the “ENTER” button, your selection is executed.

S00117

To make control switches appear on the screen when playing a DVD video disc or
video CD:
You can use the “CURSOR” button on the remote control to make the control switches appear on the screen. The control switches shown on the next page will be displayed when the button is pressed.
To make control switches appear on the screen when playing a music CD:
When a music disc is loaded in the player, playback will start automatically and the
control switches shown on the next page will appear on the screen without the need
for operating the remote control.
S00118

Basic Operations
DVD Video Menu 1

screen, push the remote control’s “CURSOR” button again or highlight the “HIDE”
switch on the screen with the joystick and
then press the “ENTER” button. If you
highlight and execute the “HIDE” switch,
the TITLE number, CHAPTER number
and playback time at the bottom of the
screen also disappear.

the VIDEO CD menu only when you
play a video CD version 2.0.
Music CD Menu

Video CD Menu
DVD Video Menu 2

NOTE

When playing a DVD video disc, different
control switches are displayed on the
screens for Menu 1 and Menu 2 (Menu 1
screen appears first when the “CURSOR”
button is pressed). Switch between the
two screens when necessary by highlighting the “PAGE” switch on the screen with
the joystick and then pressing the “ENTER” button.
To make the switches disappear from the

To make the switches disappear from the
screen, push the remote control’s “CURSOR” button again or highlight the “HIDE”
switch on the screen with the joystick and
then press the “ENTER” button. If you
highlight and execute the “HIDE” switch,
the TRACK number and playback time at
the bottom of the screen also disappear.

NOTE

If the “ ” mark appears on the screen
when you select a control switch, it will
not be possible to select or execute the
switch.

The “RETURN” switch is displayed on

Basic Operations

Replacing the battery

Take great care not to allow children to swallow batteries or any other removed part, as these could cause serious injury
or death if swallowed.

Do not let dust, oil or water get on or in the remote control when replacing the battery.
When the battery begins to get weak, the signal transmission range of the remote control becomes shorter. If this is the case, replace
the battery as soon as possible.
While holding the battery holder pushed in the direction of the arrow with your fingernail inserted in the slot, slide out the holder in the direction of the arrow using a
cross-head mini screwdriver.

S00106

Basic Operations
Remove the battery from the holder.

S00107

Install a new battery (Type CR2025 or equivalent) in the holder. Make sure the battery’s positive (+) side and the “+” mark on the holder are on the same side.
Slide the battery holder into the remote control until it clicks.

S00108

Basic Operations

Wireless Headphones
Use the wireless headphones to listen to audio outputted from your Rear Seat Entertainment System.

1
S00115

1) Wireless headphone

y Store the headphones in a door pocket when they are not being used in
order to reduce the chance of injury in case of an accident or sudden
stop.
y Do not disassemble or modify the headphones. Doing so could cause an
accident, fire or electric shock.
y Do not expose the headphones to direct sunlight, strong heat and/or a
highly humid environment. The headphones could become deformed
and the batteries in them could leak or even explode under these conditions.
y Avoid dropping the headphones and hitting them against hard objects.
y Do not sit on the headphones or place anything heavy on them.
y Human voices may have been recorded intentionally at low levels in
some DVDs for special acoustic effects. If you carelessly adjust the volume in order to hear these voices more clearly, your ears may be exposed to unexpectedly loud sounds at a later point. This may also happen when you switch to a different audio source. Very loud sounds could
damage your hearing and pose a driving hazard. Keep this in mind when
you adjust the volume.

Basic Operations
Press the “OFF • ON” button on the left earpiece to turn on the headphones: the
power lamp on the right earpiece will come on.

Sentence has been changed
according to the power lamp has been
removed from left earpiece to right
earpiece.

S00127

Adjust the sound level as desired with the volume dial on the right earpiece.

Graphics have been changed.
Because the headphone has been
changed to new ones.

S00128

1) Power lamp

Basic Operations
Adjust the earpieces to comfortable positions by extending or retracting the headband.

NOTE
For longer battery life, turn off the headphones whenever they are not being
used. Press the “OFF • ON” button to turn off the headphones and make sure
the power lamp has gone out.

S00129

Replacing the batteries

Take great care not to allow children to swallow batteries or any other removed part, as these could cause serious injury
or death if swallowed.

Do not let dust, oil or water get on or in the headphones when replacing the batteries.
When the batteries begin to get weak, the power lamp will not come on even if you press the “OFF • ON” button. If this is the case,
replace the batteries as soon as possible.

Basic Operations
Remove the battery cover on the left earpiece by loosening the screw with a flathead screwdriver.

S00130

Remove the old batteries and install new ones (two AAA batteries). Pay careful attention to the (+) and (–) marks on the battery case.
Reinstall the cover in position by tightening the screw with a flat-head screwdriver.

S00131

Basic Operations

DVD Player
The DVD player can be operated when the ignition switch is in the
“ACC” or “ON” position. Load a disc by inserting it into the disc
slot of the player, with the label side facing up. The disc will be
carried inward automatically when you insert it partially. The disc
indicator light will turn on when the disc reaches the full inward
position. To eject the disc, press the “Eject ( )” button. The disc
will come out and the indicator light will go out.
1)
2)
3)

S00119

Eject button
Disc slot
Disc indicator light

Precautions to Observe When Handling Discs
Types of Discs Playable with the Rear Seat Entertainment System
Your Rear Seat Entertainment System can play back music CDs, DVD video discs and video CDs that have any of the marks indicated
below.

NOTE
y The system is not compatible with DVD audio discs and MP3-file or WAV-file based music CDs.
y The system does not support 8-cm/3-inch CDs; if inserted, they will automatically be ejected.
Music CDs
DVD video discs
Video CDs
The following products may not play back on the Rear Seat Entertainment System.
SACD
CCCD
Dual disc
CD-R
CD-RW
CD-ROM
DVD-R
DVD+R
DVD-RW
DVD+RW
DVD-ROM
DVD-RAM

Precautions to Observe When Handling Discs
When handling discs, follow these precautions:
y In cold and/or rainy weather, condensation can form inside the DVD player, preventing normal operation. If this happens, eject the disc and wait for the player to dry
out.
y Skipping may occur when the DVD player is subjected to severe vibration (for example, when the vehicle is driven on a rough surface).
y To remove a disc from its case, press the center of the case and hold both edges
of the disc. If the disc surface is touched directly, contamination could cause poor
image or sound quality. Do not touch the disc surface.
y Use a clean disc whenever possible. If there are any deposits, wipe the disc surface from the center outward with a dry, soft cloth. Be sure not to use a hard cloth,
thinner, benzene, alcohol, etc.
y Do not use any disc that is scratched, deformed, transparent/semi-transparent,
glue-labeled, or cracked. Also, do not use any disc that has a non-standard shape
(for example, a heart shape) or 8-cm/3-inch CDs. Malfunctions or other problems
might result.
y Discs are vulnerable to heat. Never keep discs in places exposed to direct sunlight, near heaters or in vehicles parked in the sun or on hot days.

500034

Precautions to Observe When Handling Discs

DVD video discs
The DVD player of your Rear Seat Entertainment System can play back DVD video discs that conform to NTSC color TV formats. Any
DVD video discs produced conforming to other formats such as PAL or SECAM cannot be used with the player.
The following are example logos that may be indicated on DVD video discs and what they mean:

NTSC

The disc conforms to NTSC format of color TV.
The disc has two audio tracks.

The disc’s subtitles are available in two languages.

The disc’s multi-angle recorded scenes are viewable from three different
angles.

16:9 LB

4:3

Two screen aspect ratios (ratio of width to height) are selectable: wide
screen of 16:9 and standard screen of 4:3.
Region code indicating the area in which this video disc can be played.
“ALL” stands for all countries; “1” stands for the United States and Canada.

NOTE
Some DVD video discs have a region code, each indicating where it can be used. If a disc is not labeled “ALL” or “1”, you
cannot use it in your system’s DVD player. If you attempt to play it in the player, a “REGION CODE ERROR” message will
appear on the screen. Some DVD video discs without any region code may not be usable with your system’s DVD player.

Precautions to Observe When Handling Discs

Copyright
The Dolby system is manufactured under license from Dolby Laboratories.
Dolby, DOLBY, and the double-D symbol are trademarks of Dolby Laboratories.
The Rear Seat Entertainment System incorporates copyright protection technology
that is covered by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this
copyright protection technology must be authorized by Macrovision Corporation,
and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering and modification is prohibited.

“dts” is a trademark of Digital Theater Systems, Inc.

Playing Discs
Playing DVD Video Discs
Starting playback
With the vehicle’s ignition switch in the “ACC” or “ON” position, insert the disc into the disc slot of the DVD player, with the label side
facing up. The player automatically starts playback of the disc.
If a disc is already in the player, press the “DVD • CD” button on your remote control to start playback.

Stopping playback
Method using screen and remote control:
Highlight the “ ” switch on the screen with your remote control joystick, then press
the “ENTER” button.
Method using remote control alone:
Press the remote control “STOP ( )” button.

Pausing
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then press
the “ENTER” button.
Method using remote control alone:
Press the remote control “PAUSE • PLAY (

)” button.

To restart playback, perform either of the above operations again.

Playing Discs

Fast-forwarding
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
press the “ENTER” button continuously until reaching the desired scene.
Method using remote control alone:
Press the remote control “TRACK ( )” button continuously until reaching the desired scene.
When you perform either of the above operations while the player is in pause mode,
the disc will advance slowly.

Fast-reversing
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
press the “ENTER” button continuously until reaching the desired scene.
Method using remote control alone:
Press the remote control “TRACK ( )” button continuously until reaching the desired scene.
When you perform either of the above operations while the player is in pause mode,
the disc will reverse slowly.

Playing Discs

Skipping chapters forward
The data recorded on DVD video discs is divided into fragments called “titles”, and each title is further divided into smaller fragments
called “chapters”. These titles and chapters are given specific numbers, which are indicated in the guide accompanying each disc. You
can skip chapter(s) using the following procedure:
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
briefly press the “ENTER” button. The disc skips the current chapter and advances
to the beginning of the next chapter. Repeat this operation as many times as necessary to reach the desired chapter.
Method using remote control alone:
Briefly press the remote control “TRACK (
subsequent process and operation.

)” button. Refer to the above for the

Skipping chapters backward
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
briefly press the “ENTER” button. The disc reverses to the beginning of the current
chapter. If you briefly press the button again, the disc reverses to the beginning of
the preceding chapter. Repeat this operation as many times as necessary to reach
the desired chapter.
Method using remote control alone:
Briefly press the remote control “TRACK (
subsequent process and operation.

)” button. Refer to the above for the

Playing Discs

Title search
If you enter a desired title number using the remote control joystick, the disc is played back beginning with the specified title. The number of titles differs from disc to disc. Refer to the guide attached to each disc for its title numbers.
Method using screen and remote control:
Highlight the “SEARCH” switch on the screen with the remote control joystick, then
press the “ENTER” button. The display switches to the title number entry screen.

Enter the title number using the remote control joystick, then press the “ENTER” button. The player will play back the disc beginning with the specified title. To revert to
the original video screen, highlight the “ ” switch with the joystick, and then press
the “ENTER” button.
Method using remote control alone:
Press the remote control “SEARCH” button. Refer to the above for the subsequent
process and operation.

Playing Discs

Skipping to a predetermined screen
You can start playing a disc beginning with a registered predetermined screen. Some discs may not be compatible with this function.
For the predetermined screen of each disc, refer to the guide accompanying it.
Method using screen and remote control:
Highlight the “RETURN” switch on the screen with the remote control joystick, then
press the “ENTER” button. Playback will start at the predetermined screen.
Method using remote control alone:
Press the “RETURN” button on the remote control. Playback will start at the predetermined screen.

Displaying each disc’s menu on the screen
You can display the menu stored in the disc.
Menus and their contents differ from disc to disc. After displaying a menu using the method below, follow the indications that each disc
will show on its screen. Some discs may not allow you to select the top menu. For further details, please refer to the guide accompanying each disc.
Method using screen and remote control:
With the remote control joystick, highlight the “T. MENU” switch on the screen when
displaying the top menu, or the “MENU” switch when displaying other menus. Then
press the remote control “ENTER” button. The top menu or other menus will appear
on the screen.
Method using the remote control alone:
Press the “TOP MENU” button to display the top menu, or the “MENU” button to display other menus.

Playing Discs

Changing the audio language
You can select a desired audio language from those available with the disc currently loaded in the player.
Method using screen and remote control:
Highlight the “AUDIO” switch on the screen with the remote control joystick, then
press the “ENTER” button. The display will switch to the audio language selection
screen.

Click the “ ” end of the remote control joystick to highlight the desired language on
the screen and then press the “ENTER” button. To revert to the original video
screen, highlight the “ ” switch with the joystick, and then press the “ENTER” button.
Method using remote control alone:
Press the remote control “AUDIO” button. Refer to the above for the subsequent operation.

Playing Discs

Changing the subtitle language
You can select a desired subtitle language from those available with the disc currently in the player.
Method using screen and remote control:
Highlight the “S. TITLE” switch on the screen with the remote control joystick, then
press the “ENTER” button. The display will switch to the subtitle language selection
screen.

Click the “ ” end of the remote control joystick to highlight the desired language on
the screen, then press the “ENTER” button. To revert to the original video screen,
highlight the “ ” switch with the joystick, and then press the “ENTER” button.
Method using remote control alone:
Press the “SUBTITLE” button on the remote control. Refer to the above for the subsequent operation.

NOTE
If you select “OFF” in the above operation, no subtitle is displayed on the
screen.

Playing Discs

Image angle selection on multi-angle recorded scenes
If you play back a DVD video disc containing scenes recorded using the multi-angle technology, you can enjoy viewing them from different angles. For example, you can view the image of the same mountain from both the right and left sides.
Some discs may not be compatible with this function.
Method using screen and remote control:
Highlight the “ANGLE” switch on the screen with the remote control joystick, then
press the “ENTER” button. The display will switch to the angle selection screen.

Click the “ ” end of the remote control joystick to highlight the desired angle on the
screen, then press the “ENTER” button. To revert to the original video screen, highlight the “ ” switch with the joystick, and then press the “ENTER” button.
Method using remote control alone:
Press the “ANGLE” button on the remote control. Refer to the above for the subsequent operation.

NOTE
y The default setting is “01” for all multi-angle recorded scenes.
y You may have to wait a short while for the change in angle to take place.
y You can make multi-angle scenes identifiable with the angle mark shown on
the display screen. For details of the method, refer to Page 47.

Playing Discs

Selecting a dynamic range control setting
You can reduce (or compress) the difference between the maximum and minimum sound levels for your listening comfort during playback of a disc. There are three settings available, each having a different level of compression. If you select the “MAX” setting, the
dynamic range control lowers the maximum sound level while raising the minimum sound level. This makes the audio sounds gentler
to your ears.
Highlight the “DRC” switch on the screen with the remote control joystick, then press
the “ENTER” button. The display will switch to the dynamic range control selection
screen.

Click the “ ” end of the remote control joystick. Each time it is clicked, the setting
changes in the following sequence:

02 STANDARD
01 OFF

03 MAX

NOTE
The default setting of the dynamic range control is “02 STANDARD”.
With the desired setting selected, press the “ENTER” button.
To revert to the original video screen, highlight the “ ” switch with the joystick, and
then press the “ENTER” button.

Playing Discs

Playing Video CDs
Starting playback
With the ignition switch in the “ACC” or “ON” position, insert the CD into the disc slot of the DVD player, with the label side facing up.
The player automatically starts playing the disc.
If a disc is already in the player, press the remote control “DVD • CD” button on your remote control to start playback.

Stopping playback
Method using screen and remote control:
Highlight the “ ” switch on the screen with the remote control joystick, then press
the “ENTER” button.
Method using remote control alone:
Press the remote control “STOP ( )” button.

)” button.

To restart playback, perform either of the above operations again.

Playing Discs

Skipping tracks forward
The data recorded on video CDs is divided into fragments called “tracks”. These tracks are given specific numbers, which are indicated
in the guide accompanying each disc. You can advance the disc skipping a track or tracks as follows:
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
briefly press the “ENTER” button. The disc skips the current track and advances to
the beginning of the next track. Repeat this operation as many times as necessary
to reach the desired track.
Method using remote control alone:
Briefly press the remote control “TRACK (
subsequent process and operation.

)” button. Refer to the above for the

NOTE (Ver 2.0 video CD only)
Track skipping is not possible with some Ver 2.0 video CDs. For information
on track skipping of each Ver 2.0 video CD, refer to the guide accompanying it.

Playing Discs

Skipping tracks backward
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
briefly press the “ENTER” button. The disc reverses to the beginning of the current
track. If you briefly press the button again, the disc reverses to the beginning of the
preceding track. Repeat this operation as many times as necessary to reach the desired track.
Method using remote control alone:
Briefly press the remote control “TRACK (
subsequent process and operation.

)” button. Refer to the above for the

NOTE (Ver 2.0 video CD only)
Track skipping is not possible with some Ver 2.0 video CDs. For information
on track skipping of each Ver 2.0 video CD, refer to the guide accompanying it.

Skipping to a predetermined screen (Ver 2.0 video CD only)
You can start playing a disc beginning with a registered predetermined screen. Some discs may not be compatible with this function.
For the predetermined screen of each disc, refer to the guide accompanying it.
Method using screen and remote control:
Highlight the “RETURN” switch on the screen with the remote control joystick, then
press the “ENTER” button. Playback will start at the predetermined screen.
Method using remote control only:
Press the “RETURN” button on the remote control. Playback will start at the predetermined screen.

Playing Discs

Sound channel (MAIN/SUB) selection
Highlight the “AUDIO” switch on the screen with the remote control joystick, then
press the “ENTER” button once or as many times as necessary to select the desired
sound channel. Each time you press the “ENTER” button, the sound channel will
change in the following sequence:

MAIN/SUB
SUB

MAIN

NOTE
The default sound channel setting is “MAIN/SUB”.

Playing Music CDs
Starting playback
With the ignition switch in the “ACC” or “ON” position, insert the CD into the disc slot of the DVD player, with the label surface facing
up. The player automatically starts playing the disc.
If a disc is already in the player, press the remote control “DVD • CD” button on your remote control to start playback.

Stopping playback
To stop playback of a music CD, perform the following:
y Press the remote control “OFF” button.
y Press the “Eject ( )” button on the DVD player.

Playing Discs

Fast-forwarding
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
press the “ENTER” button continuously.
Method using remote control alone:
Press the remote control “TRACK ( )” button continuously.

Fast-reversing
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
press the “ENTER” button continuously.
Method using remote control alone:
Press the remote control “TRACK ( )” button continuously.
RPT

Playing Discs

Skipping tracks forward
You can advance the disc skipping one or more tracks as follows:
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
briefly press the “ENTER” button. The disc skips the current track and advances to
the beginning of the next track. Repeat this operation as many times as necessary
to reach the desired track.
Method using remote control alone:
Briefly press the remote control “TRACK (
subsequent process and operation.

)” button. Refer to the above for the

Skipping tracks backward
Method using screen and remote control:
Highlight the “
” switch on the screen with the remote control joystick, then
press the “ENTER” button. The disc reverses to the beginning of the current track.
If you briefly press the button again, the disc reverses to the beginning of the preceding track. Repeat this operation as many times as necessary to reach the desired
track.
RPT

Method using remote control alone:
Briefly press the remote control “TRACK (
subsequent process and operation.

)” button. Refer to the above for the

Playing Discs

Repeat playback
If you want to listen to the currently playing track again, perform the following:
Highlight the “RTP” switch on the screen with the remote control joystick, then press
the “ENTER” button.
The repeat-play mode will be cancelled if you press the “ENTER” button again.

Random playback
You can play all of the tracks on the disc currently in the player in a random order by doing the following:
Highlight the “RDM” switch on the screen with the remote control joystick, then press
the “ENTER” button.
The random playback will be cancelled if you press the “ENTER” button again.

Playing Discs

Scan
The scan mode lets you listen to the first 10 seconds of each track on the disc in succession. Do the following to scan-play the disc:
Highlight the “SCAN” switch on the screen with the remote control joystick, then
press the “ENTER” button.
The scan mode will be cancelled if you press the “ENTER” button again.

Initial Settings
We recommend that you make these initial settings before enjoying DVD video discs with your Rear Seat Entertainment System in
order to eliminate the inconvenience of making selections and settings each time you play a disc.
y
y
y
y
y
y

DVD language (ENGLISH)
Audio language (ENGLISH)
Subtitle language (ENGLISH)
Angle mark (ON)
Viewer restriction level (8)
Password

NOTE
y The settings shown in ( ) above are default settings made before shipment from the factory. When you highlight the “DEFAULT” switch on the “SETUP MENU” screen with the remote control joystick and then press the “ENTER” button, all settings return to the default settings.
y Some discs already contain audio language and other settings. These settings take priority over your settings.
y If the vehicle’s power supply is interrupted due to, for example, disconnection of the battery or a blown fuse, all your settings will be cancelled and the system will revert to the factory settings. If this happens, make your settings again.
Perform these settings from the SETUP MENU screen on the display. To access the SETUP MENU screen, do the following:
Method using screen and remote control:
Highlight the “SET UP” switch on the screen with the remote control joystick, then
press the “ENTER” button. The display will switch to the SETUP MENU screen.
Method using remote control alone:
Press the remote control “SETUP” button.

Initial Settings

Setting DVD/Audio/Subtitle Language
The following languages are available for setting:
y
y
y
y
y
y
y
y

ENGLISH
FRENCH
SPANISH
GERMAN
ITALIAN
DUTCH
JAPANESE
OTHERS
On the SETUP MENU screen, highlight a language mode (DVD, Audio, or Subtitle
mode) for which you wish to set a language using the remote control joystick and
then press the “ENTER” button. Once the language mode has been selected, you
can now set the desired language by highlighting it with the joystick and then pressing the “ENTER” button. The switch color of the set language changes from white to
gray.
Do the same for the remaining language modes.
To revert to the SETUP MENU screen, highlight the “ ” switch with the joystick,
and then press the “ENTER” button.

* This figure shows the screen for setting the
audio language.

Initial Settings
If you wish to set a language not included in the list of languages that appears on
the SETUP MENU screen, highlight “OTHERS” in the second step above and enter
the code of the desired language (refer to the language code list on Page 55) using
the joystick. After entering the code, press the “ENTER” button.
To revert to the SETUP MENU screen, highlight the “ ” switch with the joystick,
and then press the “ENTER” button.

* This figure shows the screen for setting the
audio language.

Setting the Angle Mark Display
This setting allows you to decide whether or not the angle mark is to be displayed
on the screen. If you select “ON” in the procedure below, the angle mark is displayed
at the top left portion of the screen whenever a multi-angle recorded scene is encountered during playback. Refer to Page 34 for information on the multi-angle recorded scenes.

Angle mark

Initial Settings
On the SETUP MENU screen, highlight “ANGLE MARK” with the remote control joystick, followed by pressing the “ENTER” button. Then, the angle mark display
switches between “ON” and “OFF” each time the “ENTER” button is pressed. Select
either “ON” or “OFF” as desired.

NOTE
y Image angle selection is not possible for DVD video discs that do not contain multi-angle recorded scenes.
y You can enjoy multi-angle recorded scenes by changing their angle even
when “OFF” is set for the angle mark display.

Setting the Viewer Restriction Level
If you make this setting, certain scenes contained in the DVD video disc in the player are prevented from appearing on the screen. The
highest restriction level is 1 and the lowest is 8.

NOTE
This setting is not effective for discs without a pre-programmed viewer restriction feature.
With an appropriate DVD video disc loaded in the player, access the SETUP MENU
screen. Highlight “PARENTAL LOCK” with the remote control joystick, then press
the “ENTER” button. The display will change to the “PERSONAL CODE” screen.

Initial Settings
Enter your four-digit password using the joystick, then press the “ENTER” button.
The display will change to the “RESTRICTION LEVEL” screen.
Select a restriction level number (1 – 8) with the joystick, then press the “ENTER”
button. The switch color of the set number changes from white to gray.
To return to the SETUP MENU screen, highlight the “ ” switch with the joystick,
and then press the “ENTER” button.

NOTE

y No default has been set for the password. The “PERSONAL CODE” screen
will show “
”. Register your password as instructed in “Password registration” below.
y Entry of a wrong password results in an “
INCORRECT CODE” message.
If this message appears, you cannot continue the viewer restriction setting
operation unless you re-enter the correct password. (Refer to Page 54.)
y If you forget your password, return the system to the state before registering the password. The method for doing this is described in NOTE of “Password registration” below. Next, register a new password.

Password registration
Use this method to register your password, which is necessary when setting the viewer restriction level.
With a DVD video disc loaded in the player, access the SETUP MENU screen. Highlight the “PARENTAL LOCK” with the remote control joystick, then press the “ENTER” button. The display will change to the “PERSONAL CODE” screen.
Enter a numerical four-digit password using the joystick, then press the “ENTER”
button.

NOTE

If necessary, you can return the system to the state before registration of the
password by doing the following:
On the “PERSONAL CODE” screen, highlight the first digit position with the
joystick, and then click the “ ” mark end of the joystick 10 times. The screen
will show “
”, indicating that no password has been set.

Connecting External Devices to Your Rear Seat Entertainment System
You can enjoy TV games from a home-use TV game machine or video programs from a video tape player with the Rear Seat Entertainment System if such an external device is connected to one of the external device jacks of the system. For further details, refer to
the instruction manual provided by the manufacturer of each external device.
2

Before you can use an external source device connected to the system, push the
remote control’s “VIDEO” button.
The external device jacks are located on the left side wall behind the second-row
seat. Open the cover to use the jacks.
There are three jacks individually marked with different colors to identify their uses
as follows:
Yellow: external video devices
Red: external audio devices
White: external audio devices

S00120

1) External device jacks
2) Accessory power outlet

Of the three accessory power outlets provided in your vehicle, the one located next
to the external device jacks can be used to supply power to an external device.
When using the power outlet, be sure to read the “Accessory power outlets” section
in chapter 6 of the Owner’s Manual.

y Keep the cover closed when the external device jacks are not in use.
y Be sure to connect only appropriate plugs that fit the jacks. Doing otherwise could cause electrical failures or short circuits in the system.
y Do not allow spilled drinks or other foreign matter to get into the external
device jacks. That could cause failure of the system.
y Rear-seat passengers must be careful not to hit connected plugs with
their body or anything else; failure of the system could result.

Adjusting Display Conditions and Selecting Display Mode
In addition to the function that allows you to adjust the display color and other esthetic conditions, the Rear Seat Entertainment System
has a function that enables you to select the display mode (normal and wide screens) according to your preference. Use the following
methods for the adjustment and selection.

Display Condition Adjustment
You can adjust the display conditions with respect to the following items:
y
y
y
y

Brightness
Contrast
Tone (gradation)
Color (balance)

NOTE
y Tone and color adjustments are not possible when a music CD is loaded in the player.
y This setting is defaulted to medium within the adjustable range for each of the above adjustment items.

Adjusting method
Press the remote control “DISPLAY” button. The display condition adjustment
screen will appear.
Highlight the desired adjustment item with the joystick, and then click either the “ ”
or “ ” end of the joystick referring to the table below. (Clicking the “ ” end results
in “–” direction adjustments and clicking the “ ” end results in “+” direction adjustments.)
Set each adjustment by selecting the “ENTER” switch on the screen or pressing the
remote control “ENTER” button.
* This figure shows the screen when a DVD video disc or video CD is loaded in the player.

Adjusting Display Conditions and Selecting Display Mode

NOTE
Select the “DEFAULT” switch to revert to a default setting.
Item

“+” direction (“

”)

“–” direction (“

BRIGHTNESS

Brighter

Darker

CONTRAST

Stronger contrast

Weaker contrast

TONE

Steeper tone gradation

Gentler tone gradation

COLOR

Stronger green colors

Stronger red colors

”)

Display Mode Selection
The following three display modes are available for your selection:
y Normal
y Wide 1
y Wide 2

NOTE
y You cannot change the display mode when a music CD is loaded in the player.
y The default display mode setting is “Wide 1”.

Adjusting Display Conditions and Selecting Display Mode

Selecting method
Each time you press the remote control “DISPLAY MODE” button, the mode changes in the following sequence:

WIDE1
NORMAL

* This figure shows a screen image when the
“WIDE 1” mode is selected.

WIDE2

Release the “DISPLAY MODE” button; 6 seconds later, a full screen will be displayed in the selected mode.

Error Messages
The Rear Seat Entertainment System displays one of the following messages
whenever it detects the relevant error condition. If an error message is displayed,
take the appropriate action that is indicated on this page.

Cause: A wrong password (personal
code) has been entered.
Remedy: Enter the correct password (refer to Page 49).

Cause:
y The disc has been inserted with the la-

bel side down.
y The disc is dirty.
y The disc is incompatible with the system.
Remedy: Check the inserted disc for any
of the above causes. Correctly insert,
clean or change the disc as necessary.

Cause: The inserted disc is of an inappropriate region code.
Remedy: Use only a disc marked “ALL” or
“1”.

Cause: Operational obstruction or other

mechanical fault has occurred during disc
insertion or ejection.
Remedy: Have the system inspected by
your SUBARU dealer.

Cause: Remote control “DVD • CD” button has been pressed when there is no
disc in the player.
Remedy: Load a disc into the player.

Language/Code List
Language

Language

Code

Language

Code

Afar

0101

Czech

0319

Scots Gaelic

0704

Abkhazian

0102

Welsh

0325

Galician

0712

Afrikaans

0106

Danish

0401

Guarani

0714

Amharic

0113

German

0405

Gujarati

0721

Arabic

0118

Bhutani

0426

Hausa

0801

Assamese

0119

Greek

0512

Hindi

0809

Aymara

0125

English

0514

Croatian

0818

Azerbaijani

0126

Esperanto

0515

Hungarian

0821

Bashkir

0201

Spanish

0519

Armenian

0825

Byelorussian

0205

Estonian

0520

Interlingua

0901

Bulgarian

0207

Basque

0521

Indonesian (formerly in)

0914

Bihari

0208

Persian

0601

Interlingua

0905

Bislama

0209

Finnish

0609

Inupiak

0911

Bengali; Bangla

0214

Fiji

0610

Icelandic

0919

Tibetan

0215

Faroese

0615

Italian

0920

Breton

0218

French

0618

Inuktitut

0921

Catalan

0301

Frisian

0625

iw Hebrew (formerly iw)

0923

Corsican

0315

Irish

0701

Japanese

1001

Language/Code List
Language

Code

Language

Code

Language

Code

Yiddish (formerly ji)

1009

Macedonian

1311

Portuguese

1620

Javanese

1023

Malayalam

1312

Quechua

1721

Georgian

1101

Mongolian

1314

Rhaeto-Romance

1813

Kazakh

1111

Moldavian

1315

Kirundi

1814

Greenlandic

1112

Marathi

1318

Romanian

1815

Cambodian

1113

Malay

1319

Russian

1821

Kannada

1114

Maltese

1320

Kinyarwanda

1823

Korean

1115

Burmese

1325

Sanskrit

1901

Kashmiri

1119

Nauru

1401

Sindhi

1904

Kurdish

1121

Nepali

1405

Sangho

1907

Kirghiz

1125

Dutch

1412

Serbo-Croatian

1908

Latin

1201

Norwegian

1415

Sinhalese

1909

Lingala

1214

Occitan

1503

Slovak

1911

Laothian

1215

(Afan) Oromo

1513

Slovenian

1912

Lithuanian

1220

Oriya

1518

Samoan

1913

Latvian, Lettish

1222

Punjabi

1601

Shona

1914

Malagasy

1307

Polish

1612

Somali

1915

Maori

1309

Pashto, Pushto

1619

Albanian

1917

Language/Code List
Language

Code

Language

Code

Serbian

1918

Twi

2023

Siswati

1919

Uighur

2107

Sesotho

1920

Ukrainian

2111

Sundanese

1921

Urdu

2118

Swedish

1922

Uzbek

2126

Swahili

1923

Vietnamese

2209

Tamil

2001

Volapuk

2215

Telugu

2005

Wol’of’

2315

Tajik

2007

Xhosa

2408

Thai

2008

Yoruba

2515

Tigrinya

2009

Zhuang

2601

Turkmen

2011

Chinese

2608

Tagalog

2012

Zulu

2621

Setswana

2014

Tonga

2015

Turkish

2018

Tsonga

2019

Tatar

2020

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 59
Create Date                     : 2010:04:30 15:50:33-04:00
Producer                        : iText 2.1.7 by 1T3XT
Modify Date                     : 2010:04:30 15:50:33-04:00

EXIF Metadata provided by EXIF.tools

Subaru 2010 Tribeca

Navigation menu

Versions of this User Manual:

Views

Navigation