Summer Infant 0223M Baby Monitor with Internet Device (Gateway) User Manual Peek Plus Internet Monitor 5 17 11 2

Summer Infant, Inc. Baby Monitor with Internet Device (Gateway) Peek Plus Internet Monitor 5 17 11 2

Users Manual

Download: Summer Infant 0223M Baby Monitor with Internet Device (Gateway) User Manual Peek Plus Internet Monitor 5 17 11 2
Mirror Download [FCC.gov]Summer Infant 0223M Baby Monitor with Internet Device (Gateway) User Manual Peek Plus Internet Monitor 5 17 11 2
Document ID1661223
Application IDdssqfORx0vUCKSET+X4Myw==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize106.97kB (1337110 bits)
Date Submitted2012-03-22 00:00:00
Date Available2012-03-22 00:00:00
Creation Date2011-05-20 11:04:23
Producing SoftwareAdobe PDF library 9.90
Document Lastmod2011-10-04 09:54:45
Document TitlePeek Plus Internet Monitor 5_17_11 2
Document CreatorAdobe Illustrator CS5

02230BB
If you experience a problem that is not noted in this manual,
please do not return the product to the store. Our Customer
Service Department may have a simple solution to your problem.
Please contact us at 1-800-268-6237 or email us at
customerservice@summerinfant.com.
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by Summer
Infant may void the users authority to operate this equipment.
Please read the
following instructions
and warnings carefully.
Keep this instruction manual
for future reference.
Tools required:
screwdriver (not included)
For technical support see back page.
For use with children from birth and up.
WARNING:
CAUTION: 1. To comply with FCC RF exposure compliance requirements, a
separation distance of at least 20 cm must be maintained between the
antenna of this device and all persons. 2. This transmitter must not be
co-located or operating in conjunction with any other antenna or
transmitter.
Adult assembly required.
Keep small parts away from
children when assembling.
Summer Infant, Inc. Monitor Warranty Policy
Summer Infant, Inc. will repair or replace (at our option) your unit free of
charge for 12 months from the date of purchase if the unit is defective in
workmanship or materials. To claim your repair/replacement, the product
must be returned to Summer Infant along with a copy of the original
purchase receipt. In the absence of the purchase receipt, the warranty will
be 12 months from the date of manufacture. This warranty does not apply to
normal wear or damage from misuse, abuse, improper storage and
handling, installation, accident, unauthorized repair or alteration. Please
contact our Customer Service Department by phone at 1-800-268-6237
or via e-mail at customerservice@summerinfant.com for details.
We LOVE our customers!
Get to know us at:
www.summerinfant.com
We at Summer Infant stand behind all of our products. If
you are not completely satisfied or have any questions,
please contact our customer service department at
1-800-268-6237 or customerservice@summerinfant.com
(For Europe call +44 (0)208 420 4429 or
customerserviceuk@summerinfant.com)
© 2011 Summer Infant, Inc.
Colors and styles may vary.
Please retain information
for future reference.
MADE IN CHINA. 5/11
INSTRUCTION MANUAL
PEEK PLUS™ INTERNET BABY
MONITOR SYSTEM
WARNING:
STRANGULATION HAZARD - Keep cord out of baby’s reach.
NEVER place camera or cords within 3 feet of the crib.
Use enclosed Security Clips to help secure cord away from
baby’s reach. Never use extension cords with AC Adapters.
Only use the AC Adapters provided.
Summer Infant, Inc.
1275 Park East Drive
Woonsocket, RI 02895 USA
1-800-268-6237
20
Summer Infant Europe, LTD.
Office Suite 6, Second Floor
Bournehall House, Bournehall Road
Bushey, Hertfordshire WD23 3HP UK
+44 (0) 208 420 4429
Summer Infant
Canadian Office
1055 Middlegate Road
Mississauga, Ontario,
Canada L4Y3Y4
905-848-2424
System Requirements: At the installation location of your gateway, you need a
broadband Internet connection (cable/DSL) with recommended upload speed of 300
bps and/or a wireless router or a cable/DSL modem with an available ethernet/LAN port
to properly access and view your cameras, you must have a required browser version
Internet Explorer 7.0 or higher, Mozilla Firefox 3.0 or higher, Safari 4.0 or higher, or
Google Chrome. Make sure you have the latest version of Adobe Flash Player which you
can download at http://www.adobe.com/support/flashplayer/downloads.html.
components:
WARNING:
THIS PRODUCT CANNOT REPLACE RESPONSIBLE
ADULT SUPERVISION.
• STRANGULATION HAZARD - Keep cord out of baby’s reach.
NEVER place camera or cords within 3 feet of the crib. Use enclosed
Security Clips to help secure cord away from baby’s reach. Never use
extension cords with AC Adapters. Only use the AC Adapters provided.
• When an AC Adapter is plugged into an electrical outlet,
do not touch the exposed end.
• Test monitor before first use, periodically, and when changing location of
the Camera.
• Do not use monitor near water (such as bathtub, sink, etc.).
• Keep monitor away from heat sources (such as stoves, radiators, etc.).
• Make sure there is proper ventilation around all monitor components. Do
not place on sofas, cushions, beds, etc. which may block ventilation.
• Nursery monitors use public airwaves to transmit signals. This monitor
may pick up signals from other monitors or similar devices and signals
broadcast by this monitor may be picked up by other receivers.
• This product is not a toy. Do not allow children to play with it.
• This product contains small parts. Adult assembly required.
Exercise care when unpacking and assembling the product.
hardware:
(Gateway)
x1
x1
(Camera)
(Ethernet Cable)
(Monitor)
BATTERY WARNING:
• Use only the original rechargeable batteries provided. Please
contact Summer Infant, Inc. for replacement batteries. Contact
information can be found on bottom of these instructions or on
the battery itself.
• Do not mix old and new batteries.
• Do not mix alkaline, standard,
or rechargeable batteries.
• Batteries are to be inserted with correct polarity.
• Clean battery and product contacts prior to
battery installation.
• Do not short-circuit supply terminals.
• Only the recommended batteries or equivalent are to be used,
volts and size.
• Remove batteries when product is stored for long periods of
time or when batteries are exhausted.
• Dispose of exhausted batteries properly.
• Do not recharge non-rechargeable batteries.
• Rechargeable batteries are only to be charged under adult
supervision.
• Keep all batteries away from children.
features (monitor):
front
Signal
Strength
Battery
Indicator
Video
On/Off
back
Sound
Lights
Power
On
Adjustable
Kickstand
Volume
Control
Menu
Left & Right
Scroll Arrows
AV Output
Scrolling
Up & Down/Brightness
Icons
AC Adapter
Jack
Battery
Compartment
x6
features (camera):
front
camera set-up (table top):
back
Power On LED
Antenna
Camera Lens
Determine a location
for the CAMERA that
will provide the best
view of your baby in
the crib. Place the
CAMERA on a flat
surface, such as a
dresser, bureau or
shelf. NEVER place
camera or cords within
3 feet of the crib.
Nighttime Led’s
Code
Button
plug
in!
Microphone
at least
3ft.
Power
On/Off
AC Adapter
Jack
features (gateway):
front
back
Antenna
Power & Sync
Indicator Light
plug
in!
Internet
Connection
Indicator Light
Be sure to test reception and
CAMERA positioning.
Code
Button
Ethernet/LAN
Port
Serial Number and
Activation Code
AC Adapter
Jack
turn
on!
camera set-up (wall mount):
camera set-up (wall mount):
plug
Determine a location
to mount the
CAMERA to the wall
that will provide the
best view of your
baby in the crib.
NEVER place camera
or cords within 3 feet
of the crib.
in!
plug
in!
Secure the cord to the wall using the 6 Security Clips included
to keep cord away from baby's reach.
turn
on!
Pre-drill a hole in the
wall using 3/16",
4.8mm, drill bit(not
included).
Tighten screw until only
1/4" (6.2mm) of the screw
is exposed.
1/4”
Be sure to test
reception and
CAMERA
positioning.
getting started online:
testingmonitor
your initial
setup:
set-up:
plug
plug
Visit www.summerinfant.com/internetviewable/activate.
in!
and
press for
hold nds!
3 sec
in!
For audio and no video, press the VIDEO
ON/OFF button on top of the unit. To turn the
monitor of completely, press and hold the
“POWER ” button for 4 seconds.
testinggateway
your initial
setup:
set-up:
Locate your product’s
Serial Number and
Activation code located
on the back of your
gateway. You will use this
to activate your account.
image of Serial Number
Sticker
plug
into
LAN
(wireless router)
(gateway)
......
Serial Number
n ligh
gree ws a
sync!
ssful
succe
reen
ing g
blinkht shows
li
net
inter ction!
conn
All fields are
required to be
filled in.
Activation Code
Childs Name
......
......
Yes, I agree to the terms of service.
Register
click
signing in after activation:
Email Address
All fields are
required to be
filled in.
Visit www.summerinfant.com/internetviewable
......
Choose a password
......
Confirm password
......
Choose a security question:
Enter email
address and
password then
click “sign-in”
Email Address
......
Password
......
forgot password?
Sign-In
What was your childhood nickname?
Share log-in information with friends and family for live viewing
enjoyment. Peek Plus allows up to three people to be logged
into internet viewing at one time.
Answer to your security question:
......
Sign-In
click
click
understanding user icons:
Refresh
COMPLETE ACTIVATION AND BEGIN LIVE VIEWING
OF YOUR CHILD! A confirmation email will be sent to
you in a few moments. Please follow the link listed in the
email to access live video of your child.
Full Screen
Settings
Volume Brightness Contrast
Logout
adjusting video quality:
automatic logout:
Internet Viewing System will automatically logout after 5 minutes
of inactivity. You will recieve a visual and audible indicator to
alert you one minute prior to logout. Click “yes” to continue
normal viewing.
Click the “Settings Icon
user settings.
” to change your
Settings
Change Email Address
Change Password
Submit
Video Quality
low
medium
high
Settings
Change Email Address
Are You Still Watching?
Change Password
Yes
Submit
click
viewing on smart phone:
Might want a little info about smart phone usage.
Video Quality
low
medium
Click the “low,
medium, or high”
button.
high
Your default video quality will be set to high. If you experience
freezing or delays you can adjust your video quality to medium
or low.
testing your initial setup:
Look for our app
in the Apple (iphone®), Google
(Android®), and Blackberry (Blackberry®) marketplaces.
Be sure to test your Monitor’s reception before initial use. We also
recommend testing your Monitor’s reception periodically.
PLEASE KEEP IN MIND THAT THE PEEK PLUS™ INTERNET BABY
MONITORING SYSTEM WILL NOT PROVIDE THE SAME LEVEL OF
PICTURE QUALITY AS YOUR TELEVISION WITH CABLE, SATELLITE
DISH, OR DIGITAL SERVICE.
To test reception you will need two adults. One adult should view the
picture on the Monitor while the other is in the nursery to adjust the
Camera. Often the quality of the reception can be improved by slightly
repositioning the Camera, Monitor, or both. Make sure to move monitor
away from other monitors, cordeless phones, walkie-talkies, ect. It may
help to place a stuffed animal or doll in the crib to simulate the position
and size of your baby. Adjust the picture quality on the Monitor as
needed by using the Brightness Adjustment “ ” and “ ” on the front of
the Monitor.
Apple
Google
(iphone®)
(Android®)
Blackberry
(Blackberry®)
To test sound quality, have one adult speak in both a normal tone and a
whisper near the crib. Adjust volume on the Monitor’s Volume Adjustment
as needed.
resetting you email:
resetting your password:
Click the “Settings Icon
user settings.
” to change your
Click the “Settings Icon
user settings.
Settings
Settings
Change Email Address
Change Email Address
Change Password
Change Password
Submit
Submit
Video Quality
Video Quality
medium
low
Change Email Address
Change Password
Click the “Change
Password” button.
Submit
Video Quality
medium
What is your paternal grandmothers
middle name?
......
Enter the answer
to your security
question then
click “Submit”.
Submit
Video Quality
low
Settings
Confirm password
Submit
Video Quality
low
medium
medium
high
Enter new
password.
Re-enter
password in the
space below
then click
“Submit”.
Click the
“Change Email
Address” button.
high
Settings
What is your paternal grandmothers
middle name?
......
Enter the answer
to your security
question then
click “Submit”.
Submit
Video Quality
low
high
.. . . . .
......
medium
low
high
Settings
New password
Change Password
Video Quality
high
Settings
Submit
low
medium
low
high
Settings
Change Email Address
” to change your
Settings
New email
Confirm email
Video Quality
medium
high
......
......
Submit
low
medium
high
Enter new email
address.
Re-enter email
in the space
below then click
“Submit”.
special features for camera:
• Sound Lights: The five Sound Lights will illuminate on the
Monitor depending on the level of your baby’s sounds. For
example, if your child is just cooing, only one or two lights will
illuminate. If your baby is crying, several will illuminate,
depending on how loud she is crying. This feature is particularly
helpful if you are in a noisy room.
• Night Vision: In a darkened room, the Camera will
automatically use its infrared LED’s to transmit a black and white
image of your baby, so you can see your child at night.
• Multi-Position Camera/Microphone: The Camera/Microphone
should be positioned so it is facing baby as directly as possible.
The multi-directional microphone, a feature unique to Summer
Infant monitors, will automatically focus on the baby’s voice
while filtering out ambient noise.
special features for monitor:
battery use and installation:
To Use the Video Monitor in Portable Mode:
For use in portable mode, the Monitor requires 1 3.7V LITHIUM-ION
rechargeable battery (included).
• To charge battery, plug the AC Adapter into the
Monitor’s AC Adapter Jack. Plug the other end into a standard
electrical outlet.
• To achieve optimal battery life, charge battery (12-16 hours) and
leave unplugged until power LED turns amber, indicating low battery.
• Note: constant recharging of your battery before low battery
indicator comes on will decrease the life of your batteries.
• Remove battery during long periods of non-use.
• If battery is no longer recieving optimal charge (i.e. decreased
monitor life), remove and replace with a new battery by visiting
www.summerinfant.com.
Monitor: This step is only
needed if replacing
battery.
• Touch-Sensitive Control Pad: The monitor is equipped with a
touch-sensitive control panel. Tap “menu ” button on the
monitor to activate control panel. Control panel illumination will
turn off after 2 seconds.
• Video On/Off Button: While operating on battery power, the
video screen will go to sleep, to conserve battery power. Audio
and sound lights will function normally. Press the Video On/Off
button to resume viewing.
• Kickstand: The monitor has a built in kickstand for table top
convience. Simply flip out the kickstand and place the monitor on a
flat, even surface for easy viewing.
• Belt Clip: For convenience and portability, you can clip the Monitor to
your belt or waistband.
Locate the battery compartment
door on back of monitor.
Slide open battery door.
• Volume: Press the “ and ”
buttons, located on the
monitor’s side, to increase and
decrease volume levels.
• Brightness: Tap “menu ”
button on the monitor to
activate control panel. Use the
“ and ” buttons on the
touch-senstive control pad to
adjust the screen’s brightness.
• Scrolling Arrows: Use the
scrolling arrows “ and ” to
navigate through the menu.
Insert battery. Ensure correct
connection.
Slide battery door back in
place.
problem solving/troubleshooting for monitor:
No picture or sound on Monitor
• Make sure the Monitor is turned on
• Make sure the AC Adapters are plugged in
• Make sure the outlets are working
• Make sure Monitor and Camera are SYNCHED up.
Sound but no picture on Monitor
• Press the Video On/Off Button once to turn on video mode
• Try adjusting the Brightness Control on the Monitor
• Test reception by moving the Monitor and/or CAMERA to
different locations
Picture but no sound
• Turn up the volume on the Monitor using the Volume
Control
Picture not clear
• Position the Monitor closer to the CAMERA if necessary
• Move Monitor away from other monitors, cordless
phones, walkie-talkies, etc.
• Try adjusting the Brightness Control on the Monitor
• Test reception by moving the Monitor and/or CAMERA to
different locations
Squealing sound
• Move the CAMERA and the Monitor further away from
each other
deleting and resyncing camera:
The Monitor and Camera are synched at the
factory for privacy reasons. If the Monitor and
Camera are not synching with each other for any
reason, please sync them as described below.
To Delete Camera:
Step 1: Delete your camera by tapping the
control panel to activate. Press menu “ ”
button to enter the camera menu. Press “ ”
to highlight “del cam”.
Step 2: Press “ ” to confirm selection.
Step 3: When camera has been sucessfully
deleted, the Summer logo will appear with a
“no signal” message.
To Resync Camera:
Step 1: Move the Monitor to the same area
as the Camera. Make sure that both the
Camera and Monitor are powerd on.
Step 2: To add a camera, tap the control
panel to activate. Press the “menu ”
button to enter the camera menu. Press “ ” again to select “Add
Cam”. Power LED will begin to blink rapidly.
Step 3: Press the code button on back of Camera to synch (see
illustration).
Step 4: Once synched, a picture from the newly added Camera will
appear on Monitor screen. Camera’s power LED will stop blinking.
problem solving/troubleshooting for gateway:
Make sure you meet system requirements
• At the installation location of your gateway, you need a
broadband Internet connection (cable/DSL) with
recommended upload speed of 300 bps and a wireless router
and or a cable/DSL modem with an available ethernet/LAN
port to properly access and view your cameras, you must
have a required browser version Internet Explorer 7.0 or
higher, Mozilla Firefox 3.0 or higher, Safari 4.0 or higher, or
Google Chrome. Make sure you have the latest version of
Adobe Flash Player which you can download at:
http://www.adobe.com/support/flashplayer/downloads.html
Gateway is not connecting to the internet
• Make sure that your gateway Ethernet cable is plugged into
the LAN port of your router and confirm that the green internet
light on the front of the gateway is blinking. The power light
should be green to show that your gateway is powered on
and successfully synced with your camera. If the power light is
red, this indicates that your gateway is no longer synced with
your camera. Refer to synching monitor and gateway section
below.
nonresponsive gateway resyncing:
The Camera and Gateway
are synched at the factory for
privacy reasons. If the
Camera and Gateway are
not synching with each other
for any reason, please sync
them as described below.
To Resync Gateway:
Step 1: Move the Monitor to
the same area as the
Gateway. Make sure that
both the Gateway and
Monitor are powerd on.
Step 2: Press the code button
on back of gateway to synch
(Figure A).
Step 3: Once synched
successfully, synced power
LED on gateway will turn
green (Figure B)

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Extract, Print high-res
Page Count                      : 10
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:cc3bc702-298d-4bc7-b3b8-974f5a4b16d4
Startup Profile                 : Print
Producer                        : Adobe PDF library 9.90
Creator Tool                    : Adobe Illustrator CS5
Create Date                     : 2011:05:20 11:04:23-04:00
Modify Date                     : 2011:10:04 09:54:45-07:00
Metadata Date                   : 2011:10:04 09:54:45-07:00
Thumbnail Width                 : 256
Thumbnail Height                : 48
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 5016 bytes, use -b option to extract)
Document ID                     : xmp.did:F77F1174072068118083B2634114676E
Instance ID                     : uuid:9824b8e6-9b6e-2b4d-adea-b3d1e1b6661b
Rendition Class                 : proof:pdf
Original Document ID            : uuid:6C8E36AFF2F2DF119508E4110724CC45
Derived From Instance ID        : uuid:52111115-4890-194a-b989-d8ce9cd008fa
Derived From Document ID        : xmp.did:7F5ADE6C372068118083862CDEA9AA65
Derived From Original Document ID: uuid:6C8E36AFF2F2DF119508E4110724CC45
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:7F5ADE6C372068118083862CDEA9AA65, xmp.iid:F77F1174072068118083B2634114676E
History When                    : 2011:04:21 17:47:12-04:00, 2011:05:20 11:04:10-04:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /
Manifest Link Form              : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference
Manifest Reference File Path    : /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/App link.psd, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/App link.psd, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus step three.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus Settings1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus Settings1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus Settings1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus viewing baby 1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus step one.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus step two.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus still watching.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus sign in screen.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/monitor screen.psd
N Pages                         : 1
Has Visible Transparency        : True
Has Visible Overprint           : False
Max Page Size W                 : 9.000000
Max Page Size H                 : 8.999993
Max Page Size Unit              : Inches
Font Name                       : HelveticaNeue-BoldCond, HelveticaNeue-Condensed, GillSans, GillSans-Bold, GillSansMT, GillSansMT-Bold, HelveticaNeue-Bold, AdobeMingStd-Light, Geometric706BT-BlackB, HelveticaNeue-MediumCond, Geometric706BT-MediumB
Font Family                     : Helvetica Neue, Helvetica Neue, Gill Sans, Gill Sans, Gill Sans MT, Gill Sans MT, Helvetica Neue, Adobe 明體 Std, Geometric 706 BT, Helvetica Neue, Geometric 706 BT
Font Face                       : 77 Bold Condensed, 57 Condensed, Regular, Bold, Regular, Bold, Bold, L, Black, 67 Medium Condensed, Medium
Font Type                       : Type 1, Type 1, TrueType, TrueType, Open Type, Open Type, TrueType, Open Type, Type 1, Type 1, Type 1
Font Version                    : 001.000, 001.000, 6.1d9e1, 6.1d9e1, Version 1.65, Version 1.65, 6.1d8e1, Version 6.002;PS 6.001;hotconv 1.0.57;makeotf.lib2.0.21895, 2.0-1.0, 001.000, 2.0-1.0
Font Composite                  : False, False, False, False, False, False, False, False, False, False, False
Font File Name                  : HelveNeuBolCon, HelveNeuCon, GillSans.ttc, GillSans.ttc, Gill Sans MT.ttf, Gill Sans MT Bold.ttf, HelveticaNeue.dfont, AdobeMingStd-Light.otf, GeomeBTBlaB, HelveNeuMedCon, GeomeBTMedB
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 2563 C 1
Swatch Group Name               : Default Swatch Group, Print Color Group, Grayscale
Swatch Group Type               : 0, 1, 1
Swatch Colorant Swatch Name     : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, White 2, PANTONE Reflex Blue C, PANTONE 877 C, PANTONE Cool Gray 5 C, PANTONE 2583 C 1, PANTONE 264 C, PANTONE 2583 C, PANTONE 2563 C 1, C=0 M=30 Y=70 K=0, C=5 M=70 Y=90 K=0, C=5 M=90 Y=75 K=0, C=30 M=0 Y=95 K=0, C=60 M=5 Y=95 K=0, C=30 M=0 Y=10 K=0, C=60 M=10 Y=5 K=0, C=80 M=5 Y=10 K=0, K=100, K=90, K=80, K=70, K=60, K=50, K=40, K=30, K=20, K=10, K=5
Swatch Colorant Mode            : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY)
Swatch Colorant Type            : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS
Swatch Colorant Cyan            : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999998, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000004, 10.000002, 0.000000, 25.000000, 39.999996, 50.000000, 55.000000, 25.000000, 30.000002, 35.000004, 39.999996, 39.999996, 50.000000, 0.000000, 100.000000, 0.000000, 0.000000, 45.999996, 26.000000, 45.999996, 22.000000, 0.000000, 5.000001, 5.000001, 30.000002, 60.000004, 30.000002, 60.000004, 80.000000
Swatch Colorant Magenta         : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000004, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 10.000002, 14.999998, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000004, 39.999996, 50.000000, 60.000004, 65.000000, 70.000000, 70.000000, 0.000000, 72.999992, 0.000000, 0.000000, 63.000000, 28.000000, 63.000000, 33.000000, 30.000002, 70.000000, 90.000000, 0.000000, 5.000001, 0.000000, 10.000002, 5.000001
Swatch Colorant Yellow          : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000004, 50.000000, 19.999998, 39.999996, 50.000000, 60.000004, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 70.000000, 90.000000, 75.000000, 95.000000, 95.000000, 10.000002, 5.000001, 10.000002
Swatch Colorant Black           : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999996, 0.000000, 10.000002, 25.000000, 35.000004, 50.000000, 70.000000, 0.000000, 2.000000, 40.000000, 29.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000
Swatch Colorant Tint            : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000
Swatch Colorant Gray            : 255, 229, 203, 178, 152, 127, 101, 76, 50, 25, 12
Format                          : application/pdf
Title                           : Peek Plus Internet Monitor 5_17_11 2
Creator                         : Adobe Illustrator CS5
EXIF Metadata provided by EXIF.tools
FCC ID Filing: PZK-0223M

Navigation menu