Summer Infant 0223T Baby Monitor with Internet Device (Camera) User Manual Peek Plus Internet Monitor 5 17 11 2
Summer Infant, Inc. Baby Monitor with Internet Device (Camera) Peek Plus Internet Monitor 5 17 11 2
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1661235 |
| Application ID | VBIrJWyvnjJjTNiy/QNCDg== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 108.61kB (1357569 bits) |
| Date Submitted | 2012-03-22 00:00:00 |
| Date Available | 2012-03-22 00:00:00 |
| Creation Date | 2011-05-20 11:04:23 |
| Producing Software | Adobe PDF library 9.90 |
| Document Lastmod | 2011-10-06 14:23:52 |
| Document Title | Peek Plus Internet Monitor 5_17_11 2 |
| Document Creator | Adobe Illustrator CS5 |
02230T If you experience a problem that is not noted in this manual, please do not return the product to the store. Our Customer Service Department may have a simple solution to your problem. Please contact us at 1-800-268-6237 or email us at customerservice@summerinfant.com. FCC Information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: Changes or modifications not expressly approved by Summer Infant may void the users authority to operate this equipment. Please read the following instructions and warnings carefully. Keep this instruction manual for future reference. Tools required: screwdriver (not included) For technical support see back page. For use with children from birth and up. WARNING: CAUTION: 1. To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Adult assembly required. Keep small parts away from children when assembling. Summer Infant, Inc. Monitor Warranty Policy Summer Infant, Inc. will repair or replace (at our option) your unit free of charge for 12 months from the date of purchase if the unit is defective in workmanship or materials. To claim your repair/replacement, the product must be returned to Summer Infant along with a copy of the original purchase receipt. In the absence of the purchase receipt, the warranty will be 12 months from the date of manufacture. This warranty does not apply to normal wear or damage from misuse, abuse, improper storage and handling, installation, accident, unauthorized repair or alteration. Please contact our Customer Service Department by phone at 1-800-268-6237 or via e-mail at customerservice@summerinfant.com for details. We LOVE our customers! Get to know us at: www.summerinfant.com We at Summer Infant stand behind all of our products. If you are not completely satisfied or have any questions, please contact our customer service department at 1-800-268-6237 or customerservice@summerinfant.com (For Europe call +44 (0)208 420 4429 or customerserviceuk@summerinfant.com) © 2011 Summer Infant, Inc. Colors and styles may vary. Please retain information for future reference. MADE IN CHINA. 5/11 INSTRUCTION MANUAL PEEK PLUS™ INTERNET BABY MONITOR SYSTEM WARNING: STRANGULATION HAZARD - Keep cord out of baby’s reach. NEVER place camera or cords within 3 feet of the crib. Use enclosed Security Clips to help secure cord away from baby’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. Summer Infant, Inc. 1275 Park East Drive Woonsocket, RI 02895 USA 1-800-268-6237 20 Summer Infant Europe, LTD. Office Suite 6, Second Floor Bournehall House, Bournehall Road Bushey, Hertfordshire WD23 3HP UK +44 (0) 208 420 4429 Summer Infant Canadian Office 1055 Middlegate Road Mississauga, Ontario, Canada L4Y3Y4 905-848-2424 System Requirements: At the installation location of your gateway, you need a broadband Internet connection (cable/DSL) with recommended upload speed of 300 bps and/or a wireless router or a cable/DSL modem with an available ethernet/LAN port to properly access and view your cameras, you must have a required browser version Internet Explorer 7.0 or higher, Mozilla Firefox 3.0 or higher, Safari 4.0 or higher, or Google Chrome. Make sure you have the latest version of Adobe Flash Player which you can download at http://www.adobe.com/support/flashplayer/downloads.html. components: WARNING: THIS PRODUCT CANNOT REPLACE RESPONSIBLE ADULT SUPERVISION. • STRANGULATION HAZARD - Keep cord out of baby’s reach. NEVER place camera or cords within 3 feet of the crib. Use enclosed Security Clips to help secure cord away from baby’s reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. • When an AC Adapter is plugged into an electrical outlet, do not touch the exposed end. • Test monitor before first use, periodically, and when changing location of the Camera. • Do not use monitor near water (such as bathtub, sink, etc.). • Keep monitor away from heat sources (such as stoves, radiators, etc.). • Make sure there is proper ventilation around all monitor components. Do not place on sofas, cushions, beds, etc. which may block ventilation. • Nursery monitors use public airwaves to transmit signals. This monitor may pick up signals from other monitors or similar devices and signals broadcast by this monitor may be picked up by other receivers. • This product is not a toy. Do not allow children to play with it. • This product contains small parts. Adult assembly required. Exercise care when unpacking and assembling the product. hardware: (Gateway) x1 x1 (Camera) (Ethernet Cable) (Monitor) BATTERY WARNING: • Use only the original rechargeable batteries provided. Please contact Summer Infant, Inc. for replacement batteries. Contact information can be found on bottom of these instructions or on the battery itself. • Do not mix old and new batteries. • Do not mix alkaline, standard, or rechargeable batteries. • Batteries are to be inserted with correct polarity. • Clean battery and product contacts prior to battery installation. • Do not short-circuit supply terminals. • Only the recommended batteries or equivalent are to be used, volts and size. • Remove batteries when product is stored for long periods of time or when batteries are exhausted. • Dispose of exhausted batteries properly. • Do not recharge non-rechargeable batteries. • Rechargeable batteries are only to be charged under adult supervision. • Keep all batteries away from children. features (monitor): front Signal Strength Battery Indicator Video On/Off back Sound Lights Power On Adjustable Kickstand Volume Control Menu Left & Right Scroll Arrows AV Output Scrolling Up & Down/Brightness Icons AC Adapter Jack Battery Compartment x6 features (camera): front camera set-up (table top): back Power On LED Antenna Camera Lens Determine a location for the CAMERA that will provide the best view of your baby in the crib. Place the CAMERA on a flat surface, such as a dresser, bureau or shelf. NEVER place camera or cords within 3 feet of the crib. Nighttime Led’s Code Button plug in! Microphone at least 3ft. Power On/Off AC Adapter Jack features (gateway): front back Antenna Power & Sync Indicator Light plug in! Internet Connection Indicator Light Be sure to test reception and CAMERA positioning. Code Button Ethernet/LAN Port Serial Number and Activation Code AC Adapter Jack turn on! camera set-up (wall mount): camera set-up (wall mount): plug Determine a location to mount the CAMERA to the wall that will provide the best view of your baby in the crib. NEVER place camera or cords within 3 feet of the crib. in! plug in! Secure the cord to the wall using the 6 Security Clips included to keep cord away from baby's reach. turn on! Pre-drill a hole in the wall using 3/16", 4.8mm, drill bit(not included). Tighten screw until only 1/4" (6.2mm) of the screw is exposed. 1/4” Be sure to test reception and CAMERA positioning. getting started online: testingmonitor your initial setup: set-up: plug plug Visit www.summerinfant.com/internetviewable/activate. in! and press for hold nds! 3 sec in! For audio and no video, press the VIDEO ON/OFF button on top of the unit. To turn the monitor of completely, press and hold the “POWER ” button for 4 seconds. testinggateway your initial setup: set-up: Locate your product’s Serial Number and Activation code located on the back of your gateway. You will use this to activate your account. image of Serial Number Sticker plug into LAN (wireless router) (gateway) ...... Serial Number n ligh gree ws a sync! ssful succe reen ing g blinkht shows li net inter ction! conn All fields are required to be filled in. Activation Code Childs Name ...... ...... Yes, I agree to the terms of service. Register click signing in after activation: Email Address All fields are required to be filled in. Visit www.summerinfant.com/internetviewable ...... Choose a password ...... Confirm password ...... Choose a security question: Enter email address and password then click “sign-in” Email Address ...... Password ...... forgot password? Sign-In What was your childhood nickname? Share log-in information with friends and family for live viewing enjoyment. Peek Plus allows up to three people to be logged into internet viewing at one time. Answer to your security question: ...... Sign-In click click understanding user icons: Refresh COMPLETE ACTIVATION AND BEGIN LIVE VIEWING OF YOUR CHILD! A confirmation email will be sent to you in a few moments. Please follow the link listed in the email to access live video of your child. Full Screen Settings Volume Brightness Contrast Logout adjusting video quality: automatic logout: Internet Viewing System will automatically logout after 5 minutes of inactivity. You will recieve a visual and audible indicator to alert you one minute prior to logout. Click “yes” to continue normal viewing. Click the “Settings Icon user settings. ” to change your Settings Change Email Address Change Password Submit Video Quality low medium high Settings Change Email Address Are You Still Watching? Change Password Yes Submit click viewing on smart phone: Might want a little info about smart phone usage. Video Quality low medium Click the “low, medium, or high” button. high Your default video quality will be set to high. If you experience freezing or delays you can adjust your video quality to medium or low. testing your initial setup: Look for our app in the Apple (iphone®), Google (Android®), and Blackberry (Blackberry®) marketplaces. Be sure to test your Monitor’s reception before initial use. We also recommend testing your Monitor’s reception periodically. PLEASE KEEP IN MIND THAT THE PEEK PLUS™ INTERNET BABY MONITORING SYSTEM WILL NOT PROVIDE THE SAME LEVEL OF PICTURE QUALITY AS YOUR TELEVISION WITH CABLE, SATELLITE DISH, OR DIGITAL SERVICE. To test reception you will need two adults. One adult should view the picture on the Monitor while the other is in the nursery to adjust the Camera. Often the quality of the reception can be improved by slightly repositioning the Camera, Monitor, or both. Make sure to move monitor away from other monitors, cordeless phones, walkie-talkies, ect. It may help to place a stuffed animal or doll in the crib to simulate the position and size of your baby. Adjust the picture quality on the Monitor as needed by using the Brightness Adjustment “ ” and “ ” on the front of the Monitor. Apple Google (iphone®) (Android®) Blackberry (Blackberry®) To test sound quality, have one adult speak in both a normal tone and a whisper near the crib. Adjust volume on the Monitor’s Volume Adjustment as needed. resetting you email: resetting your password: Click the “Settings Icon user settings. ” to change your Click the “Settings Icon user settings. Settings Settings Change Email Address Change Email Address Change Password Change Password Submit Submit Video Quality Video Quality medium low Change Email Address Change Password Click the “Change Password” button. Submit Video Quality medium What is your paternal grandmothers middle name? ...... Enter the answer to your security question then click “Submit”. Submit Video Quality low Settings Confirm password Submit Video Quality low medium medium high Enter new password. Re-enter password in the space below then click “Submit”. Click the “Change Email Address” button. high Settings What is your paternal grandmothers middle name? ...... Enter the answer to your security question then click “Submit”. Submit Video Quality low high .. . . . . ...... medium low high Settings New password Change Password Video Quality high Settings Submit low medium low high Settings Change Email Address ” to change your Settings New email Confirm email Video Quality medium high ...... ...... Submit low medium high Enter new email address. Re-enter email in the space below then click “Submit”. special features for camera: • Sound Lights: The five Sound Lights will illuminate on the Monitor depending on the level of your baby’s sounds. For example, if your child is just cooing, only one or two lights will illuminate. If your baby is crying, several will illuminate, depending on how loud she is crying. This feature is particularly helpful if you are in a noisy room. • Night Vision: In a darkened room, the Camera will automatically use its infrared LED’s to transmit a black and white image of your baby, so you can see your child at night. • Multi-Position Camera/Microphone: The Camera/Microphone should be positioned so it is facing baby as directly as possible. The multi-directional microphone, a feature unique to Summer Infant monitors, will automatically focus on the baby’s voice while filtering out ambient noise. special features for monitor: battery use and installation: To Use the Video Monitor in Portable Mode: For use in portable mode, the Monitor requires 1 3.7V LITHIUM-ION rechargeable battery (included). • To charge battery, plug the AC Adapter into the Monitor’s AC Adapter Jack. Plug the other end into a standard electrical outlet. • To achieve optimal battery life, charge battery (12-16 hours) and leave unplugged until power LED turns amber, indicating low battery. • Note: constant recharging of your battery before low battery indicator comes on will decrease the life of your batteries. • Remove battery during long periods of non-use. • If battery is no longer recieving optimal charge (i.e. decreased monitor life), remove and replace with a new battery by visiting www.summerinfant.com. Monitor: This step is only needed if replacing battery. • Touch-Sensitive Control Pad: The monitor is equipped with a touch-sensitive control panel. Tap “menu ” button on the monitor to activate control panel. Control panel illumination will turn off after 2 seconds. • Video On/Off Button: While operating on battery power, the video screen will go to sleep, to conserve battery power. Audio and sound lights will function normally. Press the Video On/Off button to resume viewing. • Kickstand: The monitor has a built in kickstand for table top convience. Simply flip out the kickstand and place the monitor on a flat, even surface for easy viewing. • Belt Clip: For convenience and portability, you can clip the Monitor to your belt or waistband. Locate the battery compartment door on back of monitor. Slide open battery door. • Volume: Press the “ and ” buttons, located on the monitor’s side, to increase and decrease volume levels. • Brightness: Tap “menu ” button on the monitor to activate control panel. Use the “ and ” buttons on the touch-senstive control pad to adjust the screen’s brightness. • Scrolling Arrows: Use the scrolling arrows “ and ” to navigate through the menu. Insert battery. Ensure correct connection. Slide battery door back in place. problem solving/troubleshooting for monitor: No picture or sound on Monitor • Make sure the Monitor is turned on • Make sure the AC Adapters are plugged in • Make sure the outlets are working • Make sure Monitor and Camera are SYNCHED up. Sound but no picture on Monitor • Press the Video On/Off Button once to turn on video mode • Try adjusting the Brightness Control on the Monitor • Test reception by moving the Monitor and/or CAMERA to different locations Picture but no sound • Turn up the volume on the Monitor using the Volume Control Picture not clear • Position the Monitor closer to the CAMERA if necessary • Move Monitor away from other monitors, cordless phones, walkie-talkies, etc. • Try adjusting the Brightness Control on the Monitor • Test reception by moving the Monitor and/or CAMERA to different locations Squealing sound • Move the CAMERA and the Monitor further away from each other deleting and resyncing camera: The Monitor and Camera are synched at the factory for privacy reasons. If the Monitor and Camera are not synching with each other for any reason, please sync them as described below. To Delete Camera: Step 1: Delete your camera by tapping the control panel to activate. Press menu “ ” button to enter the camera menu. Press “ ” to highlight “del cam”. Step 2: Press “ ” to confirm selection. Step 3: When camera has been sucessfully deleted, the Summer logo will appear with a “no signal” message. To Resync Camera: Step 1: Move the Monitor to the same area as the Camera. Make sure that both the Camera and Monitor are powerd on. Step 2: To add a camera, tap the control panel to activate. Press the “menu ” button to enter the camera menu. Press “ ” again to select “Add Cam”. Power LED will begin to blink rapidly. Step 3: Press the code button on back of Camera to synch (see illustration). Step 4: Once synched, a picture from the newly added Camera will appear on Monitor screen. Camera’s power LED will stop blinking. problem solving/troubleshooting for gateway: Make sure you meet system requirements • At the installation location of your gateway, you need a broadband Internet connection (cable/DSL) with recommended upload speed of 300 bps and a wireless router and or a cable/DSL modem with an available ethernet/LAN port to properly access and view your cameras, you must have a required browser version Internet Explorer 7.0 or higher, Mozilla Firefox 3.0 or higher, Safari 4.0 or higher, or Google Chrome. Make sure you have the latest version of Adobe Flash Player which you can download at: http://www.adobe.com/support/flashplayer/downloads.html Gateway is not connecting to the internet • Make sure that your gateway Ethernet cable is plugged into the LAN port of your router and confirm that the green internet light on the front of the gateway is blinking. The power light should be green to show that your gateway is powered on and successfully synced with your camera. If the power light is red, this indicates that your gateway is no longer synced with your camera. Refer to synching monitor and gateway section below. nonresponsive gateway resyncing: The Camera and Gateway are synched at the factory for privacy reasons. If the Camera and Gateway are not synching with each other for any reason, please sync them as described below. To Resync Gateway: Step 1: Move the Monitor to the same area as the Gateway. Make sure that both the Gateway and Monitor are powerd on. Step 2: Press the code button on back of gateway to synch (Figure A). Step 3: Once synched successfully, synced power LED on gateway will turn green (Figure B)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Encryption : Standard V2.3 (128-bit) User Access : Print, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Startup Profile : Print Producer : Adobe PDF library 9.90 Creator Tool : Adobe Illustrator CS5 Create Date : 2011:05:20 11:04:23-04:00 Modify Date : 2011:10:06 14:23:52-07:00 Metadata Date : 2011:10:06 14:23:52-07:00 Thumbnail Width : 256 Thumbnail Height : 48 Thumbnail Format : JPEG Thumbnail Image : (Binary data 5016 bytes, use -b option to extract) Document ID : xmp.did:F77F1174072068118083B2634114676E Instance ID : uuid:f28f2c49-2fcb-4069-82ae-df4cca8b4507 Rendition Class : proof:pdf Original Document ID : uuid:6C8E36AFF2F2DF119508E4110724CC45 Derived From Instance ID : uuid:52111115-4890-194a-b989-d8ce9cd008fa Derived From Document ID : xmp.did:7F5ADE6C372068118083862CDEA9AA65 Derived From Original Document ID: uuid:6C8E36AFF2F2DF119508E4110724CC45 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:7F5ADE6C372068118083862CDEA9AA65, xmp.iid:F77F1174072068118083B2634114676E History When : 2011:04:21 17:47:12-04:00, 2011:05:20 11:04:10-04:00 History Software Agent : Adobe Illustrator CS5, Adobe Illustrator CS5 History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/App link.psd, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/App link.psd, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus step three.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus Settings1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus Settings1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus Settings1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus viewing baby 1.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus step one.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus step two.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus still watching.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/Peek Plus sign in screen.tif, /Users/ANS/Desktop/Peek Plus IB and Easy Use Guide/links/monitor screen.psd N Pages : 1 Has Visible Transparency : True Has Visible Overprint : False Max Page Size W : 9.000000 Max Page Size H : 8.999993 Max Page Size Unit : Inches Font Name : HelveticaNeue-BoldCond, HelveticaNeue-Condensed, GillSans, GillSans-Bold, GillSansMT, GillSansMT-Bold, HelveticaNeue-Bold, AdobeMingStd-Light, Geometric706BT-BlackB, HelveticaNeue-MediumCond, Geometric706BT-MediumB Font Family : Helvetica Neue, Helvetica Neue, Gill Sans, Gill Sans, Gill Sans MT, Gill Sans MT, Helvetica Neue, Adobe 明體 Std, Geometric 706 BT, Helvetica Neue, Geometric 706 BT Font Face : 77 Bold Condensed, 57 Condensed, Regular, Bold, Regular, Bold, Bold, L, Black, 67 Medium Condensed, Medium Font Type : Type 1, Type 1, TrueType, TrueType, Open Type, Open Type, TrueType, Open Type, Type 1, Type 1, Type 1 Font Version : 001.000, 001.000, 6.1d9e1, 6.1d9e1, Version 1.65, Version 1.65, 6.1d8e1, Version 6.002;PS 6.001;hotconv 1.0.57;makeotf.lib2.0.21895, 2.0-1.0, 001.000, 2.0-1.0 Font Composite : False, False, False, False, False, False, False, False, False, False, False Font File Name : HelveNeuBolCon, HelveNeuCon, GillSans.ttc, GillSans.ttc, Gill Sans MT.ttf, Gill Sans MT Bold.ttf, HelveticaNeue.dfont, AdobeMingStd-Light.otf, GeomeBTBlaB, HelveNeuMedCon, GeomeBTMedB Plate Names : Cyan, Magenta, Yellow, Black, PANTONE 2563 C 1 Swatch Group Name : Default Swatch Group, Print Color Group, Grayscale Swatch Group Type : 0, 1, 1 Swatch Colorant Swatch Name : White, Black, CMYK Red, CMYK Yellow, CMYK Green, CMYK Cyan, CMYK Blue, CMYK Magenta, C=15 M=100 Y=90 K=10, C=0 M=90 Y=85 K=0, C=0 M=80 Y=95 K=0, C=0 M=50 Y=100 K=0, C=0 M=35 Y=85 K=0, C=5 M=0 Y=90 K=0, C=20 M=0 Y=100 K=0, C=50 M=0 Y=100 K=0, C=75 M=0 Y=100 K=0, C=85 M=10 Y=100 K=10, C=90 M=30 Y=95 K=30, C=75 M=0 Y=75 K=0, C=80 M=10 Y=45 K=0, C=70 M=15 Y=0 K=0, C=85 M=50 Y=0 K=0, C=100 M=95 Y=5 K=0, C=100 M=100 Y=25 K=25, C=75 M=100 Y=0 K=0, C=50 M=100 Y=0 K=0, C=35 M=100 Y=35 K=10, C=10 M=100 Y=50 K=0, C=0 M=95 Y=20 K=0, C=25 M=25 Y=40 K=0, C=40 M=45 Y=50 K=5, C=50 M=50 Y=60 K=25, C=55 M=60 Y=65 K=40, C=25 M=40 Y=65 K=0, C=30 M=50 Y=75 K=10, C=35 M=60 Y=80 K=25, C=40 M=65 Y=90 K=35, C=40 M=70 Y=100 K=50, C=50 M=70 Y=80 K=70, White 2, PANTONE Reflex Blue C, PANTONE 877 C, PANTONE Cool Gray 5 C, PANTONE 2583 C 1, PANTONE 264 C, PANTONE 2583 C, PANTONE 2563 C 1, C=0 M=30 Y=70 K=0, C=5 M=70 Y=90 K=0, C=5 M=90 Y=75 K=0, C=30 M=0 Y=95 K=0, C=60 M=5 Y=95 K=0, C=30 M=0 Y=10 K=0, C=60 M=10 Y=5 K=0, C=80 M=5 Y=10 K=0, K=100, K=90, K=80, K=70, K=60, K=50, K=40, K=30, K=20, K=10, K=5 Swatch Colorant Mode : CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, CMYK, Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY), Unknown (GRAY) Swatch Colorant Type : PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, SPOT, SPOT, SPOT, SPOT, SPOT, SPOT, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS, PROCESS Swatch Colorant Cyan : 0.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 14.999998, 0.000000, 0.000000, 0.000000, 0.000000, 5.000001, 19.999998, 50.000000, 75.000000, 85.000000, 90.000000, 75.000000, 80.000000, 70.000000, 85.000000, 100.000000, 100.000000, 75.000000, 50.000000, 35.000004, 10.000002, 0.000000, 25.000000, 39.999996, 50.000000, 55.000000, 25.000000, 30.000002, 35.000004, 39.999996, 39.999996, 50.000000, 0.000000, 100.000000, 0.000000, 0.000000, 45.999996, 26.000000, 45.999996, 22.000000, 0.000000, 5.000001, 5.000001, 30.000002, 60.000004, 30.000002, 60.000004, 80.000000 Swatch Colorant Magenta : 0.000000, 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 90.000000, 80.000000, 50.000000, 35.000004, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 10.000002, 14.999998, 50.000000, 95.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 25.000000, 45.000000, 50.000000, 60.000004, 39.999996, 50.000000, 60.000004, 65.000000, 70.000000, 70.000000, 0.000000, 72.999992, 0.000000, 0.000000, 63.000000, 28.000000, 63.000000, 33.000000, 30.000002, 70.000000, 90.000000, 0.000000, 5.000001, 0.000000, 10.000002, 5.000001 Swatch Colorant Yellow : 0.000000, 0.000000, 100.000000, 100.000000, 100.000000, 0.000000, 0.000000, 0.000000, 90.000000, 85.000000, 95.000000, 100.000000, 85.000000, 90.000000, 100.000000, 100.000000, 100.000000, 100.000000, 95.000000, 75.000000, 45.000000, 0.000000, 0.000000, 5.000001, 25.000000, 0.000000, 0.000000, 35.000004, 50.000000, 19.999998, 39.999996, 50.000000, 60.000004, 65.000000, 65.000000, 75.000000, 80.000000, 90.000000, 100.000000, 80.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 70.000000, 90.000000, 75.000000, 95.000000, 95.000000, 10.000002, 5.000001, 10.000002 Swatch Colorant Black : 0.000000, 100.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 10.000002, 30.000002, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 25.000000, 0.000000, 0.000000, 10.000002, 0.000000, 0.000000, 0.000000, 5.000001, 25.000000, 39.999996, 0.000000, 10.000002, 25.000000, 35.000004, 50.000000, 70.000000, 0.000000, 2.000000, 40.000000, 29.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000, 0.000000 Swatch Colorant Tint : 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000, 100.000000 Swatch Colorant Gray : 255, 229, 203, 178, 152, 127, 101, 76, 50, 25, 12 Format : application/pdf Title : Peek Plus Internet Monitor 5_17_11 2 Page Count : 10 Creator : Adobe Illustrator CS5EXIF Metadata provided by EXIF.tools