Summer Infant 962R Baby Monitor (Monitor Unit) User Manual 29620 SideBySide Quick Start Guide 24Nov2016

Summer Infant, Inc. Baby Monitor (Monitor Unit) 29620 SideBySide Quick Start Guide 24Nov2016

Users Manual

ZoomPress the zoom button to toggle between No zoom, zoom 1x, zoom 2x and zoom 3x. The zoom level is indicated as an icon on the top-right hand corner.For understanding additional Menu features including: delete camera, and add camera, plese refer to the user’s guide. QUICK START GUIDEUSING THE HANDHELD (continued) 3Summer Infant, Inc. 1275 Park East Drive Woonsocket, RI 02895 1 800 268-6237 11/16Sound Activated LightsThe LED light bar on the top of the handheld will light up as it picks up noises. Softer sounds will light up the amber LEDs. Louder noises will light up the red LEDs.Video On/OffTurn off the handheld’s video by pressing the VIDEO button. The screen will go dark. This feature allows you to preserve battery life when not plugged into A/C adapter. The audio feature will remain activated allowing you to monitor sounds. Press the button again to resume video monitoring.Talk-back Press and hold the talk-back button to activate the talk-back feature. Release the button to end talk-back mode.Press the nightlight button again to change the nightlight color to red. Red light helps soothe infants to sleep. This color is prominent in the sunset, natures very own way of telling your little one it’s time to go to sleep. An added bonus: young baby’s find red light soothing as it is a familiar color to them– it’s the only color light your baby was able to see in the womb.Nightlight Press the nightlight button on the handheld to activate the soft glow nightlight on the camera. The light will glow blue. Blue light acts as a soothing soft glow nightlight. Nightlights are comforting to little ones, especially toddlers who become scared in a pitch black room.The nightlight can be turned on or off from the camera by pressing the ON/OFF/Nightlight button.Adjusting BrightnessAdjust the handheld screen brightness by pressing the “POWER/MENU ” button, and brightness is selected from the menu. Use the left and right arrow buttons to adjust the brightness. VIEW CAMSCANBRIGHTNESSDELETE CAMADD CAMVIEW CAMSCANBRIGHTNESSDELETE CAMADD CAM/ MENUSplit/Quad Screen ViewingPress the Split/Quad Screen button to view more than one room at once. Audio is only transmitted from one room in this mode. Manually press left/right or up/down arrow buttons to hear other rooms. The room with the audio will have a blue box around it.Note: Zoom and Pan/Tilt are not accessible while in split-screen mode. Press camera control button to exit Split/Quad screen mode.Selecting Camera to ViewStep 1: Power on the Handheld and press the “POWER/MENU ” button.Step 2: Using the “DOWN ” button, select “View Cam”.Step 3: Use the “LEFT /RIGHT ” buttons to select an available camera (blue color indicates powered-on, within-range, or paired cameras).Step 4: Press “CAMER CONTROL ” button to confirm selection.Step 5: The video will appear on the handheld screen./ MENU/ MENUScanning CameraStep 1: Power on the Handheld and press the “POWER/MENU ” button.Step 2: Using the “DOWN ” button, select “SCAN” and press “CAMER CONTROL ” button.Step 3: Scanning cameras will begin, it will cycle through each active camera every 8 seconds.Step 4: To stop scanning, press the “POWER/MENU ” button./ MENU/ MENU

Navigation menu