Sun Microsystems Blade T6320 Users Manual Server Module Service

2015-02-02

• Sun BladeTM T6320 Server Module Service Manual
  • Contents
  • Preface
  • Sun Blade T6320 Server Module Product Description
    • 1.1 Component Overview
      • 1.1.1 Multicore Processor Information
    • 1.2 Support for RAID Storage Configurations
      • 1.2.1 Sun Blade RAID 5 Expansion Module
      • 1.2.2 Sun Blade RAID 0/1 G2 Expansion Module
    • 1.3 Finding the Serial Number
    • 1.4 Additional Service Related Information
  • Sun Blade T6320 Server Module Diagnostics
    • 2.1 Sun Blade T6320 Server Module Diagnostics Overview
    • 2.2 Memory Configuration and Fault Handling
      • 2.2.1 FB-DIMM Configuration Guidelines
        • 2.2.1.1 DIMM Installation Rules
        • 2.2.1.2 Memory Fault Handling
        • 2.2.1.3 Troubleshooting Memory Faults
    • 2.3 Interpreting System LEDs
      • 2.3.1 Front Panel LEDs and Buttons
      • 2.3.2 Ethernet Port LEDs
    • 2.4 Using ILOM for Diagnosis and Repair Verification
    • 2.5 Using the ILOM Web Interface For Diagnostics
      • 2.5.1 Changing POST Settings With the ILOM Web Interface
      • 2.5.2 Changing POST Settings With the ILOM CLI
      • 2.5.3 Displaying System Faults
        • 2.5.3.1 Viewing Fault Status Using the ILOM Web Interface
        • 2.5.3.2 Viewing Fault Status Using the ILOM CLI
      • 2.5.4 Displaying the Environmental Status with the ILOM CLI
      • 2.5.5 Displaying the Environmental Status and Sensor Readings with the ILOM Web Interface
      • 2.5.6 Displaying FRU Information
        • 2.5.6.1 Using the ILOM Web Interface to Display FRU Information
        • 2.5.6.2 Using the CLI to Display FRU Information
    • 2.6 Running POST
      • 2.6.1 Controlling How POST Runs
      • 2.6.2 Changing POST Parameters
        • 2.6.2.1 Using the Web Interface to Change POST Parameters
        • 2.6.2.2 Using the CLI to Change POST Parameters
      • 2.6.3 Interpreting POST Messages
      • 2.6.4 Clearing POST Detected Faults
        • 2.6.4.1 Clearing Faults With the Web Interface
        • 2.6.4.2 Clearing Faults With the ILOM CLI
        • 2.6.4.3 Clearing Faults Manually with ILOM
        • 2.6.4.4 Clearing Hard Drive Faults
    • 2.7 Using the Solaris Predictive Self-Healing Feature
      • 2.7.1 Identifying Faults With the fmadm faulty and fmdump Commands
        • 2.7.1.1 Using the fmadm faulty Command
        • 2.7.1.2 Using the fmdump Command
      • 2.7.2 Clearing PSH Detected Faults
      • 2.7.3 Clearing the PSH Fault From the ILOM Logs
    • 2.8 Collecting Information From Solaris OS Files and Commands
      • 2.8.1 Checking the Message Buffer
      • 2.8.2 Viewing the System Message Log Files
    • 2.9 Managing Components With Automatic System Recovery Commands
      • 2.9.1 Displaying System Components With the show /SYS Command
    • 2.10 Exercising the System With SunVTS
      • 2.10.1 Checking SunVTS Software Installation
      • 2.10.2 Exercising the System Using SunVTS Software
      • 2.10.3 Steps for Exercising the System With SunVTS Software
    • 2.11 Resetting the Password to the Factory Default
      • 2.11.1 To Reset the Root Password to the Factory Default
  • Replacing Hot-Swappable and Hot- Pluggable Components
    • 3.1 Hot-Pluggable Hard Drives
    • 3.2 Hot-Plugging a Hard Drive
      • 3.2.1 Rules for Hot-Plugging
      • 3.2.2 Removing a Hard Drive
      • 3.2.3 Replacing a Hard Drive or Installing a New Hard Drive
    • 3.3 Adding PCI ExpressModules
  • Replacing Cold-Swappable Components
    • 4.1 Safety Information
      • 4.1.1 Safety Symbols
      • 4.1.2 Electrostatic Discharge Safety
        • 4.1.2.1 Using an Antistatic Wrist Strap
        • 4.1.2.2 Using an Antistatic Mat
    • 4.2 Common Procedures for Parts Replacement
      • 4.2.1 Required Tools
      • 4.2.2 Shutting Down the System
      • 4.2.3 Using the ILOM Web Interface to Shut Down the Server Module
      • 4.2.4 Using the ILOM CLI to Shut Down the Server Module
    • 4.3 Removing and Replacing DIMMs
      • 4.3.1 Removing the DIMMs
      • 4.3.2 Replacing the DIMMs
        • 4.3.2.1 Verifying DIMM Installation
    • 4.4 Removing and Replacing the Service Processor
      • 4.4.1 Removing the Service Processor
      • 4.4.2 Replacing the Service Processor
    • 4.5 Removing and Replacing the Battery on the Service Processor
      • 4.5.1 Replacing the Battery on the Service Processor
    • 4.6 Replacing or Installing the Sun Blade RAID 5 Expansion Module
      • Removing the RAID 5 Expansion Module
      • 4.6.1 Installing the RAID 5 Expansion Module
      • Verifying the RAID 5 Expansion Module Installation
      • 4.6.2 Configuring the RAID 5 Expansion Module
      • 4.6.3 Creating a Bootable Array With the RAID 5 Expansion Module
      • 4.6.4 Additional Information
    • 4.7 Removing and Replacing the Sun Blade G2 RAID 0/1 Expansion Module
      • Removing the RAID 0/1 Expansion Module
      • 4.7.1 Replacing the RAID 0/1 Expansion Module
      • 4.7.2 Verifying the RAID 0/1 Expansion Module Installation
    • 4.8 Finishing Component Replacement
      • 4.8.1 Replacing the Cover
      • 4.8.2 Reinstalling the Server Module in the Chassis
  • Specifications
    • A.1 Physical Specifications
      • A.1.1 System Environmental Specifications
        • Operating Temperature and Altitude
        • Non-Operating Temperature and Altitude
    • A.2 Motherboard Block Diagram
  • Creating a Bootable Array With the Sun Blade RAID 5 Expansion Module
    • B.1 About Creating a Bootable Array on a SPARC System
    • B.2 Creating a Bootable Array Task Map
    • B.3 Modifying the Miniroot Directory On the Install Server
      • To Modify the Miniroot Directory
    • B.4 Modifying the Product Installation Directory on the Install Server
      • To Modify the Product Installation Directory
    • B.5 Building a Logical Drive On Which to Install the Solaris OS
      • To Create a Logical Drive Using a Network Install Server
      • To Create a Logical Drive Without a Network Install Server
      • To Delete a Logical Drive on the REM
      • To Label the Newly Created Logical Drive
    • B.6 Next Steps
      • B.6.1 Additional Information
  • Installing the Solaris OS and the RAID 5 Expansion Module Driver
    • C.1 Preparing to Install the Solaris OS
      • To Prepare to Install the Solaris OS
    • C.2 Installing the RAID 5 Expansion Module Driver With the Solaris OS
      • To Install the RAID 5 Expansion Module Driver With the Solaris OS
    • C.3 Next Steps
      • C.3.1 Additional Information
  • XVR-50 Graphics Accelerator
    • D.1 Features
    • D.2 Video Formats
    • D.3 Sun OpenGL for Solaris Software
    • D.4 Man Pages
    • D.5 Optional Video Output
    • D.6 Default Color Depth
    • D.7 Checking Device Configuration
    • D.8 HD15 Video Output Port
  • Index