Sun Microsystems Storedge Fc 100 Users Manual
FC-100 to the manual 592a1800-c0a5-4458-ae3a-473b1d6b5a7c
2015-02-02
: Sun-Microsystems Sun-Microsystems-Storedge-Fc-100-Users-Manual-489882 sun-microsystems-storedge-fc-100-users-manual-489882 sun-microsystems pdf
Open the PDF directly: View PDF
Page Count: 38
- Sun™ StorEdge™ FC-100 Hub Installation and Service Manual
- Declaration of Conformity
- Contents
- Using UNIX Commands
- Typographic Conventions
- Shell Prompts
- Related Documentation
- Sun Documentation on the Web
- Sun Welcomes Your Comments
- 1.1 Sun StorEdge FC100 Hub
- 1.2 GBIC
- 2.1 Inspecting the Hub
- 2.2 Rackmount Placement
- 2.3 Installing the Hub
- 2.3.1 Tools You Will Need
- 2.3.2 Preparing the Cabinet
- 2.3.3 Installing the Mounting Tray in the Cabinet
- 2.3.4 Installing the Hub on the Mounting Tray
- 2.3.5 Installing GBICs and Fiber Optic Cables
- 2.3.6 Routing the Power Cord
- 1. Connect the female end of the power cord to the power receptacle at the rear of the hub (FIGUR...
- 2. Route the power cord down the right side and along the bottom of the cabinet.
- 3. Route the power cord up through the cutout to the power distribution unit at the left side of ...
- 4. Connect the power cord for the tray to the power distribution unit.
- 5. Tuck the extra length of the power cord down into the pocket beneath the power distribution unit.
- 2.3.7 Verifying the Configuration
- 2.3.8 Reassembling the Cabinet
- 2.4 Troubleshooting
- 3.1 Installing a GBIC
- 3.2 Removing a GBIC
- 3.3 Removing a Hub
- A.1 Physical
- A.2 Electrical
- A.3 Environmental