Sun Microsystems 2500 Users Manual StorageTek Series Array Hardware Installation Guide

2015-02-02

• Sun StorageTek™ 2500 Series Array Hardware Installation Guide
  • Contents
  • Figures
  • Tables
  • Tray Overviews
    • Front-Access Components of the Trays
    • LEDs on the Front of the Trays
    • Rear-Access Components of the Trays
      • Controllers
        • Sun StorageTek 2540 Array
        • SFP Transceivers
        • Sun StorageTek 2530 Array
      • Controller Tray and Drive Expansion Tray Power- Fan Assembly
      • Sun StorageTek 2501 Array
        • Drive Expansion Tray IOM
        • Drive Expansion Tray IOM Connectors
    • LEDs on the Rear of the Trays
      • Controller LEDs on the Sun StorageTek 2540 Array
      • Controller LEDs on the Sun StorageTek 2530 Array
      • Controller Tray and Drive Expansion Tray Power- Fan Assembly LEDs
      • IOM LEDs on the Sun StorageTek 2501 Array
    • Disk Drives
    • LEDs on the Disk Drives
    • Common Array Manager Software
    • Service Advisor and Customer- Replaceable Units
    • Overview of the Installation Process
  • Installing Trays
    • Preparing for the Installation
      • Preparing the Universal Rail Kit
        • Unpacking the Universal Rail Kit
        • Loosening the Rail Adjustment Screws
      • Preparing the Tray
      • Preparing the Cabinet
      • Planning the Order of the Tray Installation
    • Attaching the Rails to a Cabinet
      • Attaching the Universal Rail Kit to a Standard Sun or 19-Inch Cabinet With Threaded Cabinet Rails
      • Attaching the Universal Rail Kit to a Standard 19-Inch Cabinet With Unthreaded Cabinet Rails
    • Installing a Tray in a Cabinet
    • Connecting the Power Cables
    • Intertray Cabling
      • Array Configuration Naming Convention
      • Connecting Expansion Trays
      • Cabling an Expansion Tray to a Controller Tray
      • Cabling an Expansion Tray to Another Expansion Tray
    • Drive Module Cable Labeling
      • Example Label Abbreviation
    • Simplex Configurations
    • Next Steps
  • Connecting the Management Host and Data Hosts
    • Connecting the Management Host
      • Attaching the Ethernet Ports to the LAN of the Management Host
      • Attaching the Ethernet Ports to the Management Host Using an Ethernet Hub
      • Attaching the Ethernet Ports Directly to the Management Host With a Cross-Over Cable
    • Connecting Data Hosts to the 2540 Array
      • 2540 Array Data Host Connection Topologies
      • 2540 Array Data Host Connections
      • To Connect Data Hosts Using Fibre Channel
    • Connecting Data Hosts to the 2530 Array
      • To Connect Data Hosts to a 2530 Array
    • Host Cable Labeling
      • Example Label Abbreviation
    • Next Steps
  • Powering On the Array
    • Before Powering On
    • Powering On the Array
    • Powering Off the Array
    • Next Steps
  • Data Hosts, HBAs, and Other Software
    • Data Host Software
      • HBAs and Drivers
      • Multipathing
    • Setting Up a Data Host On a Solaris System
      • To Obtain Sun Solaris 8 and 9 Data Host Software
      • To Install the SAN 4.4 Data Host Software
      • To Obtain Traffic Manager for Operating Systems Other Than Solaris
    • Installing Data Host Software for Operating Systems Other Than Solaris
      • About Data Host Software For Non-Solaris Platforms
        • Downloading and Installing Sun RDAC Software
    • Enabling Multipathing Software
      • Enabling Multipathing Software for Solaris 8 or 9 OS
      • Enabling Multipathing Software for Solaris 10 OS
    • Next Steps
  • Configuring IP Addressing
    • About IP Addressing
    • Configuring the IP Address of the Array Controllers
      • Configuring Dynamic (DHCP) IP Addressing
      • Configuring Static IP Addressing
        • Using the Serial Port Interface to Assign IP Addresses
        • To Connect a Terminal to the Serial Port
        • To Set Up the Terminal Emulation Program
        • To Establish a Connection With the Serial Port
        • To Configure the IP Addresses
  • Configuring a DHCP Server
    • Before You Begin
    • Setting Up a Solaris DHCP Server
    • Setting Up a Windows 2000 Advanced Server
      • Installing the DHCP Server
      • Configuring the DHCP Server
  • Using DC Power
    • DC Power Overview
    • Installation Notes for DC Power
      • Ship Kit Changes
      • DC Power LEDS
      • Connecting Power Cables
      • Connecting the Cables
      • Turning Off the DC Power During an Emergency
      • Relocation Cautions
  • Glossary
    • A
    • B
    • C
    • D
    • E
    • F
    • H
    • I
    • L
    • M
    • N
    • O
    • P
    • R
    • S
    • T
    • U
    • V
    • W
  • Index