Sungworld Electronics SW-E102 UM BC User Manual

Download:
Mirror Download [FCC.gov]
Document ID	985277
Application ID	I44QvD6jMvCXgWqofXJaVA==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	62.46kB (780697 bits)
Date Submitted	2008-08-14 00:00:00
Date Available	2008-08-14 00:00:00
Creation Date	2008-08-13 16:51:04
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2008-08-13 16:51:04
Document Title	Microsoft Word - 10.2-说明书-OK_2008-08-13-14-54-42-921.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

About your portable computer
Congratulation you on purchasing this new style of specialized multimedia
portable computer! This calculator has the most formidable function, the
conformity has written down the computer industry newest technology. Not only
this new set can use the present multimedia application procedure but also can
coordinate the outstanding new software in the future. This specialty multimedia
computer with elasticity function, and the probability, is a long run demand pc set
for the users.
UMPC user’s note
To adjust the most clearly display
angle, to avoid reflective of the strong sun
light or darkness environment when using
the UMPC.
To maintain the posture of nape
vertical
To
allow
the
use
of
the
wrist
support-board, no forced Hit on the
keyboard, hands remain relaxed posture
Relax your wrists, shoulder and neck
after using a certain period of time
As
far
as
possible
choose
back-support chair, sit straight, thighs parallel with the floor, feet naturally set on
the floor
Uses the UMPC matters needing attention
⊙Do not use your fingers or hard objects (for example, things like stationery) to
touch the screen, or extrusion, as it will be likely to damage the screen
⊙Avoid dusty environment, dirty environment or dust may caused UMPC
operation failure
⊙Do not put the UMPC instability to avoid damage.
⊙Do not put heavy objects on the UMPC (for example, books, and other items), to
avoid crushing
⊙Do not expos the UMPC directly to sunlight to avoid heat damage
⊙Do not put UMPC around magnetic objects to avoid effects of the magnetic field
caused disk data loss
⊙ Avoid water leaching on UMPC or exposing to moisture
⊙Do not use UMPC in the cold (0 ℃ or 30 ℉ below) or overheating (50 ℃ or 122
℉ above), so may result UMPC operation failure.
⊙Do not put battery near the source of ignition or through into fire to prevent
explosions, support for the recycling of waste battery
Users guide
Welcome to read professional multimedia UMPC
users guide, the guide tells you cover from learning to
use the UMPC to understand all the issues. This guide
assumes that you have already known DOS, Windows,
the basic concept of the PC. You can start using this UMPC to do
many interesting things and important work.
This guide was divided into 7 chapters.
Chapter 1. Introduction of this UMPC.
Chapter 2. Provides step-by-step to help you start using this UMPC as soon as
possible.
Chapter 3. How to operate a standard feature of this UMPC.
Chapter 4 .Describe how to integrate audio and voice chip, provides an
impressive display.
Chapter 5. How to connect external devices with UMPC.
Chapter 6. How to use the system BIOS setup.
Chapter 7 .How to protect your UMPC.
Content
INTRODUCTION……………………………………………………………5
1.1
Main FEATURER …………………………………………………5
1.2
Open UMPC overpack …………………………………………6
1.3
Internal front-end UMPC …………………………………………7
UMPC Status Icons……………………………………………………………………8
Easy Button Function…………..……….…………………………………………… 9
1.4
UMPC FRONT …………………………………………………10
1.5
UMPC LEFT…………………………………………………10
1.6
UMPC RIGHT ……………………………………………………10
1.7
UMPC BOTTOM …………………………………………………11
1.8
UMPC ACCESSORIES……………………………………… 11
START USING ……………………………………………………………12
2.1
BATTERY …………………………………………………………12
Extended battery life time……………………………………………………………14
2.2
AC power connection……………………………………………14
2.3
Activate your UMPC ……………………………………………15
2.4
Adjust screen control……………………………………………15
2.5
Turn off the UMPC………………………………………………15
USE YOUR UMPC…………………………………………………………16
3.1
Activate your operating system…………………………… 16
3.2
Understand the functions of the keyboard……………………16
Basic functions of the keyboard……………………………………………………18
Cursor control keys…………………………………………………………………19
Screen control button ………………………………………………………………20
Windows Operating system hotkey…………………………………………………20
Special function keys………………………………………………………………20
3.3
Use touchpad pointer device …………………………………22
3.4
screen settings……………………………………………………23
You can set the display configuration ……………………………………………23
3.5
Understand the power-saving work……………………………24
3.6
Use built-in hard disk drives …………………………………25
MULTIMEDIA
INFINITE MUSIC……………………………… 25
4.1
UMPC multimedia features …………………………………… 26
4.2
Audio sound system function ………………………………26
4.3
Set audio drivers ……………………………………………26
4.4
Multimedia Programming window …………………………27
4.5
Recording ………………………………………………………27
Using an external microphone ……………………………………………………29
4.6
Playback of audio and voice …………………………………29
Use the media player………………………………………………………………29
4.7
MPEG Video Play………………………………………………29
CONNECTING PERIPHERALS ………………………………………30
5.1
Use USB port ……………………………………………………30
5.2
Use an external display (VGA port) …………………………31
5.3
Use an external audio system …………………………………32
5.4
Use LAN ports……………………………………………………32
5.5
USE WIRELESS LAN (wireless local area network) …………………33
ADJUSTING YOUR UMPC SETTINGS…………………………………33
6.1
Set procedures for the implementation of BIOS……………………33
6.2
Main Menu Help………………………………………… 34
6.3
How to Upgrade BIOS …………………………………………40
MAINTAIN YOUR UMPC …………………………………………………41
7.1
Safe use of the Code……………………………………………41
7.2
Clean UMPC………………………………………………………42
7.3
Safeguard the quality of LCD……………………………………43
7.4
Maintain hard drives ……………………………………………43
7.5
Battery maintenance f& attention ……………………………43
7.6
Traveling ……………………………………………………… 44
APPENDIX A : SYSTEM SPECIFICATIONS…………………………………… 44
CPUS …………………………………………………………………………………45
System memory………………………………………………………………………45
LCD display…………………………………………………………………………45
VGA system…………………………………………………………………………45
Media storage………………………………………………………………………45
Audio system ……………………………………………………………………… 45
Touchpad ……………………………………………………………………………45
Keyboard ……………………………………………………………………………45
Flash BIOS …………………………………………………………………………46
I/O port……………………………………………………………………………… 46
AC / DC Power Supply……………………………………………………………46
Battery ………………………………………………………………………………46
Weight and Size…………………………………………………………………………46
1
Introduction
Your UMPC is fully Windows-compatible portable UMPCs.
With the latest function-level multimedia technology, this
UMPC is your best travel partner. The use of the latest
technology and sophistication of the fuselage, your UMPC
can be applied to general commercial 、
personal
entertainment and professional applications. This powerful UMPC is your best
choice; you could use in your office, classroom, at home, on the way or other
environment.
1.1 Main features
Let’s get to know the main features about UMPC before introducing the UMPC
parts.
This UMPC adopt VIA ® C7-M ™ Mobile Technology platform. Its core adopts
logic structure entirely with the built-in processor and Intel ® PRO / Wireless
outstanding solution.
Processing Unit
Your UMPC using VIA ® C7-M 1600MHZ processor integrates 128 KB L2
cache.
Fully compatible with Windows 2000/XP operating systems, such as all
systems and PC software applications.
Wireless LAN
Intel ® Pro / Wireless Network Solutions
Memory
The UMPC to a memory slot, install DDR2 RAM 200-pin SODIMM modules,
up to 1024 MB.
USB 2.0
Provide three fast I / O data transmission USB 2.0 ports
Graphic System
VIA provides embedded in the chip group VIA/S3G graphics controller
PCI Local Bus Architecture
32 PCI Enhanced IDE can be enhanced CPU and disk drive data transfer rate
between. Support ultra DMA100 PIO Mode, the maximum PIO Mode 4, and the
structure of LBA Bus Control.
Audio Systems
Full-duplex 16-bit stereo audio system compatible with Sound Blaster and Sound
Blaster Pro.
Flash BIOS
Flash EPROM BIOS allows you to use tools procedures Phoenix Flash easily
updated system BIOS.
Power and system management
System chip integration of SMM, the closure of unused components to
reduce electricity consumption. In order to implement power management,
you can use the mouse click Windows console to set the parameters of
power options
Suspend system allows you to enter idle immediately after the click of the
power button, can restore the original condition.
BIOS settings from the user and the system administrator password to
protect your UMPC from unauthorized use.
1.2
Open UMPC over pack
The UMPC factory carton packaging provides strict protections towards your
UMPCs, when you get your UMPC, please open the box carefully, and check the
product inside. Except the user manual, crates also include the following items:：
UMPC
transformers and power cable
lithium battery
use manual / E-book Manual
quick setup guide
Carefully examine each item to see whether there is a missing or damage. If there
is any missing or damaged item, please immediately notify the store which you
buy UMPC. Please retain packing materials and crates for your future UMPC use.
I.3 Internal front-end UMPC
This compact design of UMPCs, each side has characteristic features.
1. Color LCD
2. Shortcut key
3. Speed button keyboard SR
4. Touch Pad
5. Built-in camera
6. Status LED indicator
Color LCD
The UMPC with a color LCD screen, adjustable screen’s resolution to get the
best viewing results. LCD screen is 10.2 "TFT color LCD with resolution of 1024
x600. Color LCD display characteristics are summarized as follows:10.2"，
1024x600 TFT DPI panel. the 16 M color (32-bit color) LCD display control hotkey
allows you to adjust screen contrast easily.
Shortcut key
For more detail functions of those three keys, you can refer to easy button
functions in page 9.
Keyboard
Standard keyboard configuration, the Windows operating system hotkey button,
embedded numeric keypad, hotkey, T-shaped cursor control keys and paging
screen button.
Keyboard beneath the wide space allows you to place your wrist or hand, the
increase in typing comfort.
Touch Pad
Microsoft compatible mouse, there are three options button is a scroll button and
click touch pad button. Three buttons arranged in mouse pad below. Scroll is the
middle button allows you to scroll pages implementation of the function. Two click
buttons on both sides to support the click, select and drag-and-drop functions.
These standards similar to a UMPC mouse button the work done. As long as your
fingertips touch the mouse pad can control the cursor position. Use a mouse
button panels can choose the choice of menu items.
Built-in camera
USB 2.0 PC CAMERA, 1.3 million pixels, supports the use of video.
Status LED indicators
Continuing your UMPC power status and the current operating status information,
state icon will be described in the following paragraphs.
UMPC Status Icons
The use of UMPC icons status lights to indicate power status and system status.
Please refer to the following list of plans and to understand the significance of the
icon.
1. Indicator of the use of power
2. Battery charging indicator
3. Hard disk
4. Wireless LAN state
5. Num Lock and Caps lock
• Power Indicator
Let you know that UMPC power has started. Whether LVDS panel is opened, the
location of the signal lets you know that power state.
When the system power on, it will show a yellow light.
The UMPC yellow flashing lights will be displayed when it enter idle mode
• Battery charging indicator
Signals indicate battery charge status.
Yellow signal means the battery is charging.
Signal is off means it has been completed recharge the battery.
• Hard Disk
When the green signal shows means system access to hard disk.
• Wireless LAN state
When the green light is on, The Wi-Fi is working.
• Num Lock and Caps lock
When the light turns green, it means the Num lock on the keyboard (Num Lock)
key has been activated. When the button activated, you can use embedded
numeric keypad.
When light turns red, it means the caps lock on the keyboard (Caps Lock) key has
been activated. When the activation buttons all playing out of the alphabet keys
are all capital letters.
Shortcut keys’ functions
1. Fast Internet button
2. Quick Camera
3. User-Defined
• Internet Quick button.
You can define the functions of activation procedures. For example, you can
define the key to provide fast Internet use, as long as the icon on as a button. For
further details or more of this function are interested.
•Access to taking photos.
•User defined the short cut key.
1.4 UMPC Front
1．Microphone jack
Can be connected to a microphone to your UMPC
2. Headphone jack
Can be connected stereo headphones, external speakers for personal use.
3. SD / MMC card slot
Support SD / MMC cards.
1.5 UMPC Left
Your UMPC left with any of the characteristic features.
•1.Battery
•
Equipped with rechargeable lithium Ion (Li-Ion) batteries, AC power supply
in the absence of circumstances, UMPC power supply. Please refer to Chapter 2.1
of the note to learn how to install batteries and discard.
• 2.cooling fan intake valve
Heat from the UMPC will be to maintain the temperature in the permissible range
1.6 UMPC Right
Your UMPC right side is with multi-features.
10
Right-side function
• 1.USB port
Universal Serial Bus (USB) port on your UMPC connects to the USB peripheral
devices (such as printers, monitors, scanners, etc.).
• 2.DC Power Interface
Connect power adapter to supply continuous power supply and battery charger.
3. External VGA display interface
VIA/S3G Unichrome Pro II built-in chip can be connected with monitor or
projector, greater viewing area. You can use the show hotkey options at the same
time will be displayed in the LCD screen and the external screen displays, or
switching to just the display.
4. LAN ports
Then within 10 Base-T/100Base/TX LAN module, through the local area network
will be your UMPC and other UMPC, or network connections.
1.7 UMPC Bottom
UMPC bottom features
1. Driver District.
2. Battery slots
3. Memory slots
• Hard sepal area
Please replace the hard drive at this open area on the lid.
• Battery slots
Equipped with rechargeable Li-ion battery.
• Memory slots
Remove screws can see a DIMM slots, the factory has been stuck DDR2 DRAM
memory.
1.8 UMPC Accessories
Transformer
Transformer can provide an external power supply, and at the same time
recharging. This voltage transformer with automatic switching capability; It is
11
access to connect with any 100 VAC ~ 240V AC outlet. When you connect
transformer, if UMPC power is opened, all will be recharged.
Battery
Apart from the use of transformers, your UMPC batteries may also be used to
provide electricity. Battery use of the lithium-ion rechargeable (Li-Ion) batteries,
when fully charged battery, and use power management functions can provide
hours of UMPC power. When you use the supply of electricity transformers,
batteries should be Add to the UMPC to an external power supply interruption, as
a back-up power, and are available to recharge the battery, prevent battery from
aging.
Start using
The UMPC design focus on easy to set up and use. This
chapter will describe the installation steps to make your UMPC
normal operation to the extent possible, to accelerate the pace
of implementation. If the dealer has been pre-installed all the necessary drivers,
or an updated version of the driver, please contact dealers。
2.1 Battery
The UMPC is designed to use the power source of the following:
• Use the power transformer connected to the use of AC power socket.
• Use lithium batteries.
Please make full use of transformers, in the absence of AC power.
When you use the UMPC, rechargeable lithium-ion battery lets you in the absence
of an external power supply. When you connect transformers, rechargeable
batteries will start immediately. Generally the usage of lithium batteries is about
four hours.
To achieve the maximum capability of batteries, do not charge the battery before
the rechargeable battery to fully discharge. To complete battery discharge, please
remove transformer plugs, switch off the power management functions (in the
Windows Setup and configuration), and then turn on the power. When the battery
is fully discharge, please start charging plug transformer plugs.
If you do not fully discharge the battery, the battery will not be able to fully
charged.
12
lithium batteries are more fragile than nickel-metal hydride batteries, so please do
not use other transformer rechargeable lithium batteries action, or else they may
combustion or explosion。
Install battery
These UMPC batteries provide the most convenient installation methods. You can
be part of processes can be inserted into the battery slot at the battery.
Remove the battery
To remove the battery, keep fixed to the left &right hold button down, and at the
same time removing both the buttons on the opposite side to pick the battery.
Battery
HOLD
HOLD
Replacement batteries
When your UMPC estimates only remaining minutes of battery power, LED status
panel on the battery icon will be flashing, and a shortage of electricity Bleep
beeps to remind you the power shortage. If you use a sound system, hard disk will
consume a lot of electricity, your UMPC power than that expected by the time you
faster depletion. You must insufficient power transformer will be connected to
your UMPC, or your UMPC and data storage to idle drives. Otherwise UMPC will
automatically enter idle drives and data storage to Close. Unless you connect or
power transformer has been installed on rechargeable batteries, it can not be
re-activated UMPC. To install batteries, please refer to the above sections of
"battery" and "Remove the battery.
For Windows 2000/XP, Idle Mode (Hibernate (dormant) or Standby (standby)) in
the Windows Control Panel Power Options settings)
 In your replacement battery or connect transformers, has been determined to
save your information, otherwise it will cause data loss.
13
Extended battery life time
When you go out on how to extend battery life, it is a simple but very important
matter. When you find at the workplace, you should pay attention to the external
light source will not be too light, the brightness of the screen and reduce the
intensity and contrast, please refer to chapter VI, "adjust your UMPC" power
management functions and a detailed description of various models.
2.2 AC power connection
AC power can be used to provide UMPCs and UMPC power in the battery charger.
The transformers have the UMPC automatically switches designed to connect
240V AC ~ 100V AC power outlets.
AC power connection:
1. Power lines should be inserted into the AC power transformer jack.
2. Power line into the other side AC power socket.
3. Transformer will be inserted into the connector on the UMPC behind the DC-IN
jack.
·Please try to transformer connected to the UMPC and batteries installed in the
UMPC, so suddenly in the middle of the power to ensure that the UMPC's power
supply and avoid data loss.
·The power supply products to use qualified power line.
·Make sure you are using the expansion slot and can support all lines connected
devices total current negative Dutch.
·Clean in front of the UMPCs, make sure all have been removed external power
supply (for example, the AC power transformer) Connectivity.
14
2.3 Activate your UMPC
·Power Activation (Power) button at the top of the base. Press the power button
activated your UMPC and check whether the power supply turn on the lights.
·After a few seconds, the UMPC will turn on the screen; the UMPC will begin the
implementation of activated self-test (Power on Self Test or POST) examination of
all system components are working properly. In the course of testing found no
errors, will be displayed on the screen and may issue short beeps.
·Self-test, the screen will display the message "press  to RUN SETUP." At
this point you need to perform this procedure, because your dealer has to
complete the necessary settings. The other additional settings please wait
reference to Chapter VI, and to implement SETUP program.
·After the test is completed, the UMPC will begin the search for hard disk
activated by the operating system. The UMPC are usually in the drive, the
Windows operating system pre-installed. Please refer to the use of the Windows
operating system manual to understand how to use it, or contact dealers for
assistance.
2.4
Adjust screen control
LCD screen brightness can be   + / +   bond to be adjusted.
You must be in your UMPC activated after further adjustments to obtain the best
effect.
·If TFT color screen brightness adjustment can only use hotkeys.
Hotkey adjustable brightness of the LCD screens brightness. Hot Keys screen
brightness can not be adjusted for the whole white or black, it can provide
adequate LCD screen with brightness to the brightness of the external
environment. In the bright room, you must increase the brightness of the LCD
screen.
2.5
Turn off the UMPC
If you have a period of time will not use the UMPC, it is advisable to power down
15
to increase their use of time. Before you switch off the power, you must close all
applications, operating system shut down again
When you use the UMPC longer period of time, will be closed after the UMPC, a
habit for LCD screen panels and fuselage kept open state for a period of time, so
the UMPC will allow more internal mechanical cooling. If the closure panel LCD
screen, the UMPC's LCD screen temperature will be reached, if often done so, will
be accelerated aging of LCD screen. The situation is even more serious when the
UMPC boot, it will damage panel LCD screen, and then did not activate
power-saving function.
Using your UMPC
This chapter will show you how your day-to-day UMPC operations
in the use of this UMPC's built-in functions. If you are a UMPC
navice, you must read your operating system manual to learn how to
use your UMPC. To be familiar with the operating system is very important. The
following sections will tell you about advanced operation, and allows you to try
other function.
3.1 Activate your operating system
UMPC operating system is an indispensable part. If there is no operating system,
and did not like playing chess board. Operating system is the implementation of
all software applications platform. At present the most popular operating system
for Microsoft Windows. Unless you are a UMPC expert-level users or the need for
more powerful operating system, otherwise let your dealer installation of a
Windows operating system. If your UMPC has been installed in an operating
system, then you open the UMPC operating system and activate the power, you
can start your work. Please refer to your operating system manual to understand
how to implement it.
3.2 Understand the functions of the keyboard
Your UMPC equipped with an 88-key keyboard, but provides identical functions to
standard-size 101 or 102 key keyboard of IBM. In addition to the standard
typewriter keyboard configuration, and several additional control function keys,
including the Windows operating system hotkey.
16
1. Function keys
2. Control button
3. Windows Start menu button
4. Control button
5. Windows shortcut keys
6. Cursor control keys Keyboard
Keyboard functions and instructions are as follows:
Function keys
Function keys in accordance with the application procedures and functions,
including keyboard, the F1 through F12. The buttons with the FN key can be
activated with the use of special features. Some key (the key word for blue) of the
design process, it has two functions.
Windows operating system keys
Use the following two keys to upgrade operational efficiency: Start Menu button
Be able to bring up the Start Menu.
Shortcut / application keys
It can be fast and convenient way to bring up the menu button.
Cursor control keys
Cursor control key allows you to move the cursor on the screen position. Cursor
on the screen based on the use of different applications, there will be a
flicker-bottom line, blocks or vertical lines. Cursor display a text input position.
Typing keys
On the blue button words, if press the control button at the same time will produce
different results.
Control keys - Ctrl, Alt, and Shift and for the control of FN keys, and the use of
other buttons at the same time, they can change their function. Use control
button, hold down the control button, then press the other button. For example:
"by Ctrl C" means hold down the Ctrl key and press the letter C bond. This modular
approach to your keys used by the application will have specific functions.
17
Basic functions of the keyboard
keyboard
functions
 Key executable instructions. In many text
editing application, enforceability  Button. Click this button to cancel or leave the
command or function.
 Insert key is key. Click this button can be
switched keyboard input information for insertion or
coverage model.
Shift +  button. Print Screen key is. . Back on
the video screen to the shared memory as to your
specific purposes.
 Key is the Delete key. Click this button to the
right of the cursor to delete characters, or delete
anti-white text or content.
Shift + button.
Press this button to
temporarily stop the execution. Any button and then
resume the implementation of directives.
< Bksp> Button. Click this button to the left of the
cursor to delete characters.
 Button. Click this button and at the same time
by other letter keys can be made large write. Use this
key and characters by double bond (the second
button as a symbol) can be made top marks button. At
the same time for most applications, in combination
with other keys to perform specific instructions.
18
keyboard
functions
 Button. Click this button to move the cursor to
the right of a positioning point. The typewriter keys
and the general similar.

Button.
Control
is
key.
Used
in
many
applications, in combination with other keys to
perform specific instructions.
 Button. Alternate is key. Used in many
applications, in combination with other keys to
perform specific instructions.
Fn +  button. Embedded 15 activation
buttons numeric keypad. The buttons on the blue
markings.
 button. Used in many applications, the
use of capital can be fixed bond.
Cursor control keys
Button
Keyboard function
Up arrow key. Each times the cursor moving upward
and his entourage.
Down arrow keys. Each time moving the cursor down
and his entourage.
The left arrow key. Each time the cursor left a mobile
grid.
The right arrow key. Each time moving the cursor to
another grid.
19
Screen control button
Button function
button
 Button. The cursor will move to the screen or
the start of a party.
 Button. The cursor will move to the screen or at
the end of the line.
WINDOWS operating system hotkey
button
Button function
 Button. Start button to bring up the Windows
operating system.
 button. In the Windows operating
system functional equivalent of the right mouse
button.
Special function keys
The UMPC has several special function keys; function keys make these keys have
two functions. When and (Fn)"button at the same time pressed, the buttons can
be set system parameters, these buttons also known as" hot keys.
button
Button function
Activate or disable the built-in speaker volume
turned on or off mode.
20
button
Button function
At this button activation system to enter standby
mode.
Switching to liquid crystal display screen and an
external LCD screen or display screen and an
external screen.
Reduce screen brightness.
Increase screen brightness.
Switching the mouse. When the press this
button after the two lost touch plate, a second
after the touch pad back to normal.
decrease the volume of speakers
Increase the volume of speakers
21
3.3 Use touchpad pointer device
Your UMPC equipped with built-in touchpad pointer devices in UMPC placed on
the wrists of the central location
Touch screen version provides several options let you customize its functions. If
you set these options, go to Control Panel, double-click the mouse icon. There
are several options for you control the cursor size and color, cursor speed,
double-click speed and the choice of key locations around configuration.
Touch Pad could replace the mouse to operate in the Windows operating system.
Before using the touch pad, you must first install the device driver or loading
procedures to enable the device. You can also use the touch pad device
compatible with the standard Microsoft drivers, and in the normal use of the
Windows operating system. However, if you want to use the touch pad additional
functionality, you must install its own device drivers, including the strengthening
of the function of enclosed tool.
1. Left key
2 Right key
3touchpad
Touch Pad function
How to use touchpad pointer devices::
1. Touch pad on the regional equivalent of four square screens. Fingers will touch
lightly on the board and move in the direction you want to, we can move the cursor
position. If your fingers touch pad has been moved to the edge, and re-instituted
finger on the touch pad will be finger on the other side.
2. Like to choose projects, with the click of the mouse or touch pad hand
guidance can be. Touch Pad best when pressure is SMART point. To implement a
project, as long as the two left by two or quick touch the plate.
22
3. Simulation To hold down the mouse button action (drag icon or select
projects), please use the click and drag light of the action. This action of a point
under the two movements, but under the second point, the finger is to maintain
contact with the Touch Pad: points, left, and then stopped moving. As long as you
keep the fingers stay in touch board, hold down the mouse button on the same
equivalent.
4. Such as screens to scroll up or down, as long as the bottom-up or sliding
dynamic scrolling button on it.
Avoid any liquid on the touch pad surface, and requested regular touch pad
and touch fingers dry. Please do not let any magnetic objects close touch
pad.
3.4 screen Settings
Your UMPC's VGA display using the highly-performance PCI controller and
specifications and is fully compatible with IBM VGA. This controller offers many
additional functions, as well as higher resolution, when you connect external
high-frequency high-resolution displays, particularly useful. Please refer to
Chapter 2, section 5, the manual "UMPC installed device driver" in the Windows
operating system installed VGA device driver steps. When you installed VGA
driver, then please set display resolution or screen size to cope with LCD screen
panels. The UMPC models offer 1,024 x600 LCD panel. Then you can set up a few
colors, graphics and photos to more clearly show on the screen.
You can set the display configuration
The following table shows the use of your LCD screen and an external monitor
(CRT), the resolution can be set：
Monitors
The resolution can be set
The
largest
Histogram
1024x600
640x480
16 million colors
XGA LCD
800x600
16 million colors
1024x600
16 million colors
1024x600
640x480
16 million colors
SXGA+ LCD
800x600
16 million colors
1024x600
16 million colors
23
65,536 K-64 or equivalent to 16 high-color, 16 million or 16 M-equivalent to 32
full color.
You can use
 +  hotkey switching liquid crystal display screen for
only at the same time, as well as the use of an external screen LCD screen and an
external screen. WINDOWS OS system in the display resolution changes
In the Windows operating system, such as system monitors changes in the
content, just on the desktop blank area on the right mouse button and select the
"contents", or enter the "Control Panel" and click the "Display" icon. "Monitors
content" dialog box will appear on the screen, click the "Settings" page you want
to set the values. Please follow the above table shows that configuration settings.
If you can not set the monitor content, in accordance with Chapter 2, section 5,
the manual "UMPC devices installed Driver" changes to the content of display
drivers. Ask your dealer for the latest version of Windows VGA driver.
3.5 Understand the power-saving features
Your UMPC has excellent performance, but also with an excellent power-saving
function. Design your UMPC integrates advanced intelligent power management
functions, or when the suspension of operation of system use, it will shut down
most of the power supply components. This will not affect your UMPC's
performance, because when it detects any activities, will be the restoration of
electricity and speed of execution. This feature can not only extend battery life,
but also to reduce the temperature of UMPC components. How to control your
UMPC's power management function please refer to the console of Windows
power management functions. Power management mode definitions are
described below：
Full (Full-On) mode
In the absence of any UMPC executive power management devices, UMPC
performance will be the biggest implementation of all applications.
Idle and stored to memory (Suspend to RAM) mode
In addition to other support components and memory, all power supply will be
shut down in the work of your files will be stored to memory. You can use the
power button activated by this model, or Windows controller Taiwan Power
Options settings in idle time. To restore full state, as long as the press the power
button.
Idle and stored to disk (Suspend to Disk) mode
When activated mode, the content of the whole system will be stored to disk,
power supply and all components will be closed, while the entire clock also will be
suspended (with the exception of Real Time Clock or outside RTC). Windows
24
console you can set the power options dormancy (Windows 2000/XP) mode to
activate this feature. To restore full state, as long as the press the power button.
Machinery closed (Mechanical off) mode
Apart from the RTC (real time clock), all power system is shut down. Including is
an external AC power supply and battery power.
3.6 Use built-in hard disk drives
Your UMPC equipped with a built-in large-capacity 2.5-inch IDE hard disk drives,
you can use it to store or install the operating system and all applications software
programs. You must also be in the use of hard drives formatted before. If the hard
drive divided into two separate areas, will be an additional disk drive D. As a result
of your support of the capacity of UMPC hard drives (maximum to 60 GB), you
must format the hard drive before the BIOS SETUP procedures set disk drive type.
Your UMPC supports automatic detection (Auto-detect) hard disk drive type, so
you need to manually configure. Your dealer should have been for you to
complete these steps; you can make reference to the implementation of Chapter
VI of the BIOS SETUP procedures related content. You can replace the larger
standard UMPC hard disk drives to increase storage capacity.
If you want to replace hard disk drives, please contact your local dealer for the
dealer to install the equipment related information.
out on your hard drives before you must shut down the UMPC power supply,
otherwise it would harm the UMPC and hard disk drives. When the drive is reading
and writing, to avoid shaking or moving UMPC.
Multimedia Infinite Music
This section allows you to make full use of your UMPC all the
multimedia features, in the workplace or entertainment can be
obtained from the fun and excitement. You will learn how to work with
the built-in sound system, the drive to the trendiest multimedia Acoustic-Optic.
25
4.1 UMPC multimedia features
Your UMPC is full of rich multimedia features that let you re-use it, with a lot of fun,
comfortable, exciting and easy. Your UMPC to perform all the multimedia
operations, because it has the following characteristics:
• The VIA C7-M
• Up to 1 GB DDR2 DRAM
• be visible / video
• Integrated VIA / S3G graphics engine
• 16-bit sound system, built-in speakers, microphones and cameras
4.2 Audio sound system function
Your calculator with a 16-bit stereo controller, using the built-in mixer control
functions, allows you to record, store and play back voice, music and other audio.
Your UMPC also integrates a built-in full-duplex microphone and pair of
mini-speakers and woofer for your sound recording and playback anywhere.
Right on your UMPC, you will find voice ports, which include:
• External 1 / 8 inch microphone jack, full-duplex or half-duplex mode stereo
microphone mode
• Headphone jack to listen to for your personal use
• External volume adjustment knob.
4.3 Set audio drivers
At the beginning of the use of UMPCs in the audio function before, in the
installation of Windows system, sound first driver settings. If you buy a UMPC with
pre-installed Windows, then you should have been purchased by business is how
to set a good audio function. Instead, please refer to the second chapter on how
to set up audio driver for Windows use.
26
4.4 Multimedia Programming window
Windows provides several built-in UMPC multimedia program enables your
immediately use. Set point to the commencement proceedings, the subsidiary
application and entertainment, you will find Multimedia Programming group, which
includes several types of multimedia applications. (The following paragraphs to
use Windows XP for example)
Standard multimedia components, including:
• Media Player - can play video and animation files
• Recording procedures - voice recording and playback
• Volume control - the volume adjustment mixer.
Process and the implementation of the mouse to click the menu to know
how to operate the multimedia component.
4.5 Recording
Your UMPC lets you recorded human voices and other sounds in a number of
ways, and can save to your hard drive. These people sound or sound files can be
broadcast through loudspeakers from internal or external device connected
through the jack, headphone jack, the use of external speakers or headphones to
listen to. You can also voices of these files as documents in many kinds of
applications, as you gave each other gifts. This section will briefly how the
Windows operating system, a voice recorder.
When you want to record your voice, multimedia programs from the group must be
implemented in recording procedures. Recording procedures of control buttons
are easily understand their functions, including fast-rotating, before quickly to
play, and stop recording button. A mouse click can browse the menu how to
27
operate description of the procedures for recording.
Recording procedure enables you to different voices from the input source voice
recorder, these sources include:
external microphone
drive (external equipment)
As you can import from different sources voice recorder, so you must first
recording procedures in the control panel to set the appropriate sound input
record device. Steps are as follows:
1. To work out the mouse double-click on the volume control or click the start
button, and procedures set subsidiary applications, entertainment, the final
click volume control.
2. Click the main menu option content.
3. Click recording small round button, select the Show All components are
volume control.
28
4.
Click the OK button, the recording dialog will appear. In the dialog box, you
need to select the audio source of input devices. At this time only by the
microphone voice recorder. If you want to record music from the drive, you must
click the CD player.
Using an external microphone
Your UMPC allows you to use external microphones, in order to get higher quality
recording results. You can find your UMPC Right external microphone jack.
External microphone must use 1 / 8 inch of the joint, recording the same steps.
4.6 Playback of audio and voice
Your UMPC has two built-in speakers can play audio and voice, you can also use
the right of the voices in the UMPC manually adjust the volume control knob.
In order to obtain better quality voice output, you can choose to connect an
external speaker; it must be inserted in the right side of the Line of UMPC-out jack.
You can also connect to headphones, listening, please remember that before you
put on the headset first volume is transferred to a minimum.
Use the media player
Player multimedia files the easiest way is to use the media player. Steps are as
follows:
1. Click start button, and then select Set procedures, application of the
subsidiary of entertainment.
2. Click the Windows Media Player.
3. Click the File menu and select the file you want to play, the identification and
open the file, click a button players start playing.
4.7 MPEG video play
Your UMPC can play MPEG. MPEG procedures use software, you can view on
29
your UMPC screen images. You can also implement procedures entertainment
group in the Windows Media Player.
Connecting peripherals
This chapter will be how to connect UMPC peripherals. You can
connect a printer or mouse, connecting external monitor and
keyboard, or any other peripheral equipment. Through the
contents of this chapter you will gradually learn how to use this external
equipment.
5.1 Use USB port
Pan-USB or serial port is used by Compaq, DEC, IBM, Intel, Microsoft, NEC and
Northern Telecom jointly developed by companies such as external bus standard
equipment. Personal UMPC equipped with USB peripheral devices can be
connected automatically after the completion of settings, or the need to
re-activate the implementation of set procedures. USB can also connect a
number of devices, and can operate in parallel, such as floppy machine, mouse,
digital cameras, printers, CD-RW drives, modems, keyboards, game equipment
and may provide additional jacks or hub.
30
According to your
needs, and sometimes you must disable the USB port to the release of system
resources for other devices.
5.2 Use an external display (VGA port)
1.
Your UMPC equipped with 15 - pin VGA port connector of any external color
VGA display. You need to show a signal line (usually provided by the monitor).
One end of the cable must be 15 - pin connector to connect UMPCs.
2.
Connecting external display:
3.
1. Identified and shut down the UMPC power supply monitors have been
closed.
Connect monitors, UMPC power to close or idle. Although you can connect
external monitor without having to turn off the UMPC and external display power,
however, this way of the two devices are harmful and will reduce the life span of
these devices.
4. Display monitor cable to connect to a UMPC back of the VGA ports, and
connectors on the cable locking screws.
5. Stuck in the walls display the power cord socket on the ground connection.
6. Opening display power.
7. Opening the UMPC's power supply. And the display screen will also display.
Your UMPC can be displayed by default.
8. If you want to display only on the display screen or projector and on the LCD
screen closed, click  +  to Run SETUP
button executable BIOS setup. BIOS configuration process consists of
four menus, you can use <- - "button option. In option can be used when moving
between the upper and lower keys, change settings when used with <+> <- +> or
<> and <- "button. In the right frame of the options are simple Help.
6.2 Main Menu Help
When entering the BIOS setup screen, as Figure, the second row for the text
drop-down menu, use the direction keys to move option to switch to another
menu screen.
The menu is as follows:
Main
basic settings
Boot
boot disk drives set
Security
password settings
Exit
procedures from the BIOS settings
34
General help screen
In addition to the functions of the next options, pressing  can bring up
general help screen, the brief operation attribute the function button.
Note button operation
In the BIOS setup screen bottom of the feature set bond for the Tour menu to
select settings, the following functions：
Function key
function
←or→
Move the cursor left or right
↑or↓
Upward or downward options
+ or-
Options shift, backwards and forward
Enter
choose to enter the menu
Tab
Move to the next setting
F1
Show general window for help
F9
Load the best of the default values
F10
Save & exit
ESC
Leave current document
Sub-menu
on left of
option if a triangular symbol on its behalf with the menu, the menu
includes the option of further parameters, the cursor will move by the department
 or <-> options will be set up before the shift, and after the shift.
Hard Disk Drives sub-menu
This section is used to set up the hard drives which will be set to boot disk drives,
the default values for the open settings: [drive models] [Disabled]
Removable
37
Drives sub-menu
Removable Drives setting the same as Hard Disk Drives .
Security protection menu
Protection of UMPC data, set by the user passwords, so as to avoid the user
without cause invasive and UMPC-related information or steal change BIOS
settings, please refer to Figure：
Change Supervisor password
The project manager for the set password access control procedures BIOS
passwords, move your cursor over here , or a form of a map of the dialog
box, asking you to enter your password, entering the latter is a table Figure 2,
please enter a password again to confirm, the last in Figure 3, by , or a form of a map of the dialog box, asking
you to enter your password, enter the latter is a table Figure 2, you enter a
password again to confirm password, last seen Figure 3, by  button to set
up.
Exit from the menu
When you finish after all the BIOS settings from the menu to open, please enter
the BIOS setup menu mode to leave, please refer to Figure:
Saue Changes and Exit
When you finish all the BIOS settings, select the item to confirm all settings to
stored value into CMOS memory, click , a dialogue window Figure 6:
39
Selecting[OK] will not change any settings and left BIOS settings; election
[Cancel] to BIOS settings.
Load Optimal Defaults
If you want to give up settings, all settings will be the best value of the default
values, I would be grateful if the cursor moved here , a dialogue window
Figure 7:
Selecting [OK] will be the best value of all settings of the default values; elect
[Cancel] to BIOS settings.
6.3 How to Upgrade BIOS
Your UMPC use EPROM Flash BIOS chip, you can easily upgrade BIOS
procedures. When you update BIOS, all the settings will be gone.
Upgrade BIOS
1.
BIOS Update will be inserted floppy disk machine.
2.
Open the UMPC's power supply.
3.
DOS prompt and type the following commands:
3.
According  audios / i XX.ROM (BIOS file name)
implementation End after this procedure.
5. Re-activated by pressing any key UMPC.
Please contact your dealer the latest BIOS upgrade files of the relevant
information.
40
7. Maintain your UMPC
The UMPC is fully compatible with IBM's portable personal UMPCs, portable
computing with multimedia technology and the latest features, this UMPC's
performance can and even go beyond the current majority of the desktop UMPC.
The UMPC designed compact, light weight, to the implementation of general
business, personal productivity, and professional applications, is your best
partners in company at home and out..
7.1 Safe use of the Code
This chapter will tell you how to maintain a safe environment in the use of UMPC
for detailed information. By following the guidelines, you will be able to maintain
your regular UMPC in good condition, so please read carefully to ensure that the
UMPC's life
• Before cleaning, make sure no external power source, such as: sockets,
switches, adapters, and other vehicles.
• When cleaning, do not use a liquid or spray-cleaning agent can used wet tissue
or dry cleaning cloth.
• Socket should be located close to the UMPC and easy to use.
• stay away from damp.
• Devices should be placed flat and solid surfaces, in order to avoid falling
damage.
• To avoid overheating UMPC, I should be grateful if placed in the circulation of
air, and anything not covered in the UMPC on.
• Please note that the use of the power supply. The UMPC with specific
specifications of the power demand.
• Use only authorized by the power outlet
• If the connector plug and socket inconsistent, please find qualified, plumbers
installed.
• unplug power, from the socket Bomu, do not pull wires.
• Make sure UMPC can be used by the power load is all in the use of electrical
equipment.
• Although the UMPC is the AC outlet voltage can be applicable to all countries,
but still requires a stable and continuous power supply. Make sure the UMPC is
connected to the correct voltage values, we can not identify, please consult the
local power company, or to purchase manufacturers.
• Avoid trampling on the power line or placed articles on its.
41
• Please record all warnings matters.
• UMPC when not in a long time, the power supply should be switched off to avoid
transient overvoltage cause harm.
• Do not spill liquid on your UMPC, or they may result in fire or electrical short
circuit.
• For security reasons, portable UMPCs qualified service personnel should be
demolished, not cannibalizing its own.
• In the following situations, please review by qualified service personnel
Damaged cord or plug
Liquid into UMPC
UMPC humid and deformation
UMPC does not work properly or if you use manual inspection is still not
operational.
Falling UMPC damage
Significantly damaged UMPC
• Do not buy UMPCs in an inappropriate environment, such as the placement of its
perturbation 60 degrees above the high-temperature environments, will cause
damage.
• The UMPC's power supply to the wire with the use of qualified certification. That
the current is less than 6 amps, with more than three kilograms weight should be
used when no less than H05VV-F, the power line 0.75mm2.
• To avoid internal damage to the UMPC, in any internal components installed
equipment should be removed first socket and pull out the battery in the UMPC.
The UMPC is the sound pressure level is based on the specifications of the IEC
6070-1, which is equal to or less than 70 dB (A).
7.2 Clean UMPC
When needing to clean plastic casing and keyboard, use a soft cloth to clean
moderate slightly wetting agent, or sell the UMPC chairs above cleaning tools
clean.
Please do not use alcohol, petroleum-based solvents, or strong cleaning agents
to clean the PC. Not directly to the chassis, keyboard, screen or any is spraying
liquid. If the liquid crystals display (LCD) or fuzzy dust, please clean soft cloth to
James some moderate glass cleaning and gently cleans the glass, not to spray
liquid directly to the screen. In addition, please do not take a tissue to wipe display
screen in case scratches.
42
7.3 Safeguard the quality of LCD
Turning to the issue of the screen, the temperature is an important part. Good
after the end of the working procedures, routine work is shut down the UMPC
power supply, close lid. However, all types of displays and UMPC components are
internal heat, you close the lid, and the screen will not be able to distribute the
heat. So please cultivate the habit: Let the lid open about 10 minutes to allow heat
dissipation.
You should also use the UMPC power management functions to the system for a
period of time when no power and shut down LCD screen, and can also install a
screen saver.
Please follow the general safety precautions to learn how to clean the UMPC.
7.4 Maintain hard drives
Information is lost as the result of the system. Users must cultivate a certain time
every week or on the maintenance of the habit of hard drives. The following is that
you can carry out maintenance work:
• Backup hard drives information.
Install anti-virus procedures, and surveillance files will be destroyed by virus
activities.
• Occasional use of SCAN DISK, correction directory and the file allocation table
any errors. This can never be the use of the space sector.
• plot access to the hard drive, or do not hold mobile UMPC, is not particularly
shocked the UMPC, otherwise it may damage the drive.
• Use hard disk drives maintenance procedures, such as Windows disk
reorganization procedures, which can be separated to eliminate the state
archives, reorganization hard disk drives, hard drives to shorten the access time.
• Set in the UMPC system passwords, so that others are not able to use your
UMPC.
7.5 Battery maintenance & attention
The UMPC attached to the battery requires proper maintenance and processing,
in order to ensure effective operation and the longest life. If the battery is not
handled properly, there are chemical burns or fire hazards.
To ensure that the battery with a normal life, dealing with batteries, please pay
attention to the following matters:
Careful with batteries, do not try to decomposition, crushing, burrows, open,
falling, damage, short-circuit, fire or under water, or more than 60 ℃ exposed to
the environment.
43
Follow the instructions for the battery charger manual, and the only ventilation in
charge. Do not use this charger that came with your UMPC other than the
Chargers.
Do not place in high of the battery for one or two days.
If not using Rectifier, do not put the battery in more than one UMPC on.
Do not put battery of more than two months without recharging to avoid
excessive discharge, excessive discharge damage the battery.
Please properly handle the destruction of the battery in order to avoid pollution of
the environment. Batteries contain dangerous chemical composition.
When you first use batteries or rechargeable batteries no more than two months,
please use the BIOS settings "Battery Refresh” discharges after re-charging.
7.6 Traveling
To ensure safety when traveling and convenience, please observe the following
instructions:
• Before travel, backup hard drives, all the necessary files.
• In the leave prior to the night time for rechargeable batteries to ensure adequate
power.
Do not forget to bring AC rectifier and additional battery.
Try to bring backup software.
Check destinations voltage and socket type. If the power line rectifier is different,
it must be applied to purchase the type. Please contact the distributor.
Bag or suitcase to carry loaded UMPC with bag or suitcase, the UMPC will not
generally regard as baggage.
Recall that the use of energy saving features and techniques to conserve battery
power.
Appendix A: System specifications
In addition to providing the technical appendix of information and the detailed
specifications drives. Please note that the premises with the specifications and
the information may be incompatible with your UMPC specifications and
standards and revise the manual as the event would not be without notice.
The UMPC adopt advanced modular architecture, in accordance with the needs of
your various grades of customer to expand the existing functions, which
previously only functional desktop UMPC can provide.
44
CPU
•
Adopt VIA ®C7-M CPU
•
1.6 GHz or above VIA ® C7- M CPU
•
Integrated 128 KB L2 cache memory
SYSTEM MEMORY
• A 200 - pin random memory slot.
• It can be maximizing upgraded to 1024 MB, the use of 200 - the pin SODIMM
128, 256, and 512 MB module.
• PC266 DDR2 D RAM modules
LCD DESPLAY
•
10.2" XGA (1024x600) OR 10.2" SXGA+ (1024x600) COLOR TFT LCD
•
Maximum 32 M color full-color (full-screen)
VGA
•
•
•
•
SYSTEM
• Integrated VIA S3G graphics engine
• LCD screen and CRT display screen can be synchronized
10.2 "LCD in 1024 x 600 resolution, up to 16 million colors (non-interlaced)
External monitor or projector in 1920 x1080 resolution up to 16 million colors
MEDIA Storage
•
2.5 "format 9.5 mm high-capacity hard disk drives module; Bus Mastering,
Ultra DMA ATA-100 speed, support LBA mode
AUDIO SYSTEM
• Full-duplex 16-bit stereo audio interface, support functions wavetable
• Compatible with H / W Audio Sound Blaster 16
• Built-in stereo pair of speakers
• connecting a microphone and stereo equipment
An external speaker and headphone (audio output)
TOUCHPAD
Built-in touch pad (serial / USB interface), the plane has left panel, right panel,
and scroll button.
KEYBOARD
• Windows operating system shortcuts with the full-size 88-key keyboard, cursor
keys inverted T-seven hotkey, 12 function keys and numeric keypad.
• International Universal Keyboard
45
FLASH BIOS
•
512K Flash ROM BIOS、Can be updated
I/O PORT
• 3 Universal Serial Bus USB 2.0
• 1 x 15 pin VGA connectors (CRT)
•1 x LAN ports
Wireless devices
802.11b or 802.11 a / b Wireless LAN (wireless local area network) (using Intel ®
Centrino ™ mobile technology Intel ® PRO / Wireless Network Solutions)
AC / DC Power Supply
10,000 with automatic switching voltage (100 V ~ 240V) 60-watt power supply
Battery
• Intelligent rechargeable lithium-ion battery or a light-type battery
• Battery time for four hours or more (tested by ZD Batter Mark)
WEIGHT & SIZE
•
Size:26 x 20x 3.3cm
•
NW:1.4kg
46
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
47
NOTE: The manufacturer is not responsible for and radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to
operate the equipment.
48

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2008:08:13 16:51:04+08:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2008:08:13 16:51:04+08:00
Format                          : application/pdf
Title                           : Microsoft Word - 10.2-说明书-OK_2008-08-13-14-54-42-921.doc
Creator                         : Administrator
Document ID                     : uuid:27b0d711-30dc-480a-88e1-9dad53f690f6
Instance ID                     : uuid:9497daa3-d717-42d8-abf4-9bdc20114c8a
Page Count                      : 48
Author                          : Administrator

EXIF Metadata provided by EXIF.tools