Sunitec Enterprise BC008 Bluetooth Speakerphone User Manual

Sunitec Enterprise Co., Ltd. Bluetooth Speakerphone

user manual

1 325476User Manual1. About Bluetooth SpeakerphoneThis versatile Bluetooth speakerphone is specially designed for user to enjoy convenience and freedom of wireless communication. Dual capacity of use on desk-top like a Conference Speakerphone and in-car like a Hands-free car kit. Advanced built-in microphone with D.S.P. solution for Echo Cancellation & Noise Suppression that gives you impeccable full duplex sound quality.2. About Bluetooth TechnologyBluetooth wireless technology is set to revolutionize the personal connectivity by providing freedom from wired connections-enabling links and connectivity between notebook/laptop, mobile phones, portable handheld devices and other Bluetooth enabled devices within 10 meters. Utilizing global sound & digital data 2.4GHz ISM transmission, it makes global communication in the way you’ve never dreamed of!3. Appearance and Function(1) Speaker(2) Microphone(3) LED(4) Charging Socket (5-pin USB)(5) Mute Button (6) MFB Button (Multi-Function Button)(7) Volume Increase (V+)(8) Volume Decrease (V-)(9) Solar Panel(10) Windshield Mount4. Recommend Installation PositionIt is recommended that the speakerphone is positioned on to the top of the left side of the windshield as shown in the pictures below:WARNING: Do not place or store the speakerphone over the area of the automobiles safety airbag deployment, or it may cause serious injury when a safety airbag deploys.5. Charging Your Bluetooth SpeakerphoneThe Bluetooth speakerphone comes with a built-in rechargeable battery. Prior to using the speakerphone, it is recommended to charge the battery fully for the rst time.Using the car charger• Insert the car charger completely into the charging slot until the LED ash red. • Normal full charge time is 3 hours. (approx.), and the LED will ash off when charge is completed.Using solar power• Direct the solar panel on the back side of the speakerphone toward sun. (Please refer to the recommended installation position, as mentioned above.)• If the speakerphone receives sufcient sunlight for 2 hours, you can talk for duration of up to 1 hour. Using solar power charge, the operation time (the talk time and the standby time) will be extended continuously without any additional charge required by the car charger.WARNING: Do not attempt to charge the speakerphone with any charger other than the one provided. Using another charger may damage or destroy the speakerphone. 6. Turning ON/OFF the SpeakerphonePower On: When speakerphone is under off mode, press and hold the “MFB” for 4 seconds until you hear a short beep. The blue LED will ash 5 times, and then the speakerphone will automatically connect to the last connected mobile phone.Power Off: Speakerphone is under standby mode, press and hold the “MFB” button for 4 seconds until you hear a short beep. The red LED will ash 5 times before power off.7. PairingPrior to using the speakerphone for the first time, you must pair it with a Bluetooth enabled mobile phone. The steps below describe pairing instructions for a typical Bluetooth enabled mobile phone.(1) Place the speakerphone and mobile phone no more than 1 meter (3 feet) apart.(2) Ensure the speakerphone is turned off.(3) Press and hold the “MFB” button for 6 seconds until the LED flash red and blue alternatively, it is now ready for pairing.(4) Activate the Bluetooth function on your mobile phone and search for accessible Bluetooth device by referring to your mobile phone user guide for details.(5) Select “BT Speaker” from the list of searched devices.(6) Enter the pre-programmed code “0000” and press “OK” to pair the speakerphone and the phone. (7) When pairing is completed, the speakerphone is under the standby mode with the blue LED ashes in every 3 seconds. Please place the mobile phone and the speakerphone within 10 meters (32 feet) sensing distance. NOTE: If the pairing cannot be completed within 2 minutes after the pairing mode is activated, the speakerphone will power off automatically. Please repeat steps above to pair the speakerphone and mobile phone again.8. Connection/Link between Speakerphone and Mobile PhoneAfter pairing is completed, speakerphone is always under standby mode. Before you place or answer a call, if the headset icon is not shown on phone screen, please follow the steps below to activate the Bluetooth connection/link through your mobile phone or speakerphone until the headset icon is on the screen.• On phone: Select the “BT Speaker” from the paired list on your mobile phone’s Bluetooth menu.• On speakerphone: Short press “MFB” and select “Accept” on phone screen to accept connection.9. Disconnection between Speakerphone and Mobile PhoneWhen you need to connect your speakerphone with another Bluetooth enabled mobile phone, please follow the steps below to disconnect the speakerphone with the pre-paired mobile phone.• On phone: Select “Disconnecting” on the Bluetooth device list of your mobile phone’s Bluetooth menu to remove the connection.• On speakerphone: Power off the speakerphone.NOTE: When losing the connection/link, the speakerphone will turn off automatically in 15 minutes. The blue LED will ash twice in every 3 seconds when the speakerphone is not connected with mobile phone.10. Using the Speakerphone(1) Answering a CallWhen receiving a phone call, short press the “MFB” button to answer the call.(2) Ending a CallShort press the “MFB” button to end a call.(3) Reject a CallWhen you hear the ringing tone, press and hold the “MFB” button for 2 seconds to reject the call.(4) Voice DialIf your mobile phone is voice dialing enabled, under standby mode, short press the “MFB” button and say the voice tag after you hear a beep.Note: Please make sure to record voice tag into the mobile phone before using voice dial function. Functionality varies depending on the mobile phone models. Please refer to your mobile phone user guide for details.(5) Last Number Re-DialingUnder standby mode, short press the “MFB” button twice for last number redials.(6) Adjusting the VolumeDuring a call, press the “V+” or “V-” buttons repeatedly until you reach the desired volume level.(7) Mute & Un-Mutea. Mute: During a call, short press the “MUTE” button to mute the speakerphone. The red LED will ash on during mute mode.b. Un-Mute: Short press the “MUTE” button during mute mode to un-mute the speakerphone.(8) Transferring Callsa. Speakerphone to Mobile Phone: During a call, press both of “V+” and “V-” buttons, and the call is routed to your mobile phone.b. Mobile Phone to Speakerphone: Press both of “V+” and “V-” buttons to route the call to speakerphone.11. MultiPoint Feature(1) Activate Multipoint ConnectionThe default setting of the speakerphone’s multipoint function is OFF. You can activate the multipoint function for connecting with 2 mobile phones at the same time.a. Multipoint ON: Under standby mode, press and hold “V+” button for 3 seconds until you hear a beep.b. Multipoint OFF: Under standby mode, press and hold “V-” button for 3 seconds (2) Press and hold both of “V+” and “V-” buttons for 10 seconds until the blue and red LED flash 5 times, then the speakerphone will resume standby mode. The speakerphone is now back to original setting, and after power on the speakerphone again, it will enter pairing mode automatically.NOTES: If the speakerphone is connected with a mobile phone before restore to default setting, it will enter pairing mode automatically after restored to default. If the speakerphone is not connected with the mobile phone before restore to default setting, it will be under standby mode after restored to default setting.14. Safety Information(1) Check local laws regarding use of a mobile phone and speakerphone while driving. If you use the speakerphone while driving, ensure your attention and focus remain on your responsibility of driving safely.(2) Never allow children to play with the speakerphone. Small parts may be a choking hazard.(3) Observe all signs that require an electrical device or RF radio product to be switched off in the designated areas. These could include hospitals, blasting areas, and potentially explosive atmospheres.(4) Turn off your speakerphone prior to boarding an aircraft. Do not use your speakerphone in an aircraft.(5) Never place or store the speakerphone over the area of the automobile's safety airbag deployment, or it may cause serious injury when a safety airbag deploys.15. LED Light IndicatorsSpeakerphone Status LED IndicatorPower OFF Mode OFFPower ON Blue LED ash 3 secondsPower OFF Red LED ash 3 secondsStandby Mode Blue LED ash once every 3 secondsStandby (Disconnect Bluetooth Device) Blue LED ash twice every 3 secondsStandby-Low Voltage Red LED ash once every 3 secondsTalk in progress Blue LED ash once every 6 secondsPairing in progress The red and blue LED ash on alternatively Charging in progress Red LED steady onCharging completed Offuntil you hear a beep. The speakerphone will turn off the multipoint function and power off automatically. When power on the speakerphone again, it will only connect to the last connected Bluetooth device.(2) Multipoint Pairinga. First mobile phone: Pair the speakerphone with one of the Bluetooth-enabled mobile phones.b. Second mobile phone: Power OFF the speakerphone. Press and hold the “MFB” button for 5 seconds to enter pairing mode again to pair and connect with the second mobile phone.c. Connect with the rst paired mobile phone to the speakerphone.(3) Multipoint Connection/Link with 2 Mobile PhonesAfter the multipoint function is activated, please follow the steps below to connect with 2 Bluetooth enabled mobile phones at the same time.When power on the speakerphone, it will automatically search and connect the last 2 mobile phones that have been connected before.(4) Answer the Second Call during a Call (3 way call or two link function)When receiving a second call, press “MFB” button twice to hold the rst call on line and answer the second call.(5) Reject the Second Call during a Call (3 way call or two link function)When receiving a second call, press and hold the “MFB” button for 3 seconds to reject the second mobile phone call.(6) Switch between 2 Phone Calls (3 way call or two link function)a. When having 2 calls on the line, press “MFB” button twice to switch between these 2 phone calls.b. When having 2 calls on the line, short press the “MFB” button once to end the current call and stay with the other call.NOTES: When the multipoint feature using, the device can not support three-way calling feature..12. Low Voltage Protection of BatteryWhen the voltage of battery decreased to 3.3V, the red LED will ash in every 3 seconds, and the speakerphone will be power off automatically when the voltage under 3.0V.13. Restore to Default SettingPlease follow the steps below to reset the speakerphone to its original setting and remove all the previous pairing and connection.(1) Ensure the speakerphone is under standby mode.16.ProductSpecicationBluetooth Compliance: Bluetooth V2.1+EDROperating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM bandOutput Power: Class 2, up to 10 metersSupport Proles: Headset and Handsfree 1.5 prolesSupport Multiple Paired Devices: Memorize paired data of 8 Bluetooth phonesStand-by Time: Up to 1400 hoursTalk Time: Up to 11~13 hoursBattery Charging Time: Using charger about 3 hours, Using solar power about 18 hoursCharger Voltage: DC5.0V, 400mABattery: 3.7V 550mAH, (Rechargeable Lithium-ion Battery)Size: 92.5 x 54 x 15.5 mmWeight: 60g (without windshield mount), 69g (with windshield mount)NOTES: This speakerphone is in compliance with the specied Bluetooth version. It does not guarantee compatibility of all functions on every Bluetooth enabled device. Please check with your mobile phone's user manual for compatibility and functionality.41 2 3 5"SOLAR-POWERED"MULTIPOINTSPEAKERPHONE(5) (6)(3)(4)(2)(7)(8) (9)(10)(1)BC903M(5)(6)(3)(4)(2)(8) (7)(9)(10)(1)BC903BMThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Navigation menu