Sunitec Enterprise BC009 Bluetooth SpeakerPhone User Manual FCC UM BC353BM Sunitec 091123

Sunitec Enterprise Co., Ltd. Bluetooth SpeakerPhone FCC UM BC353BM Sunitec 091123

User manual

User Manual12using  the speakerphone, it is recommended  to charge the battery fully for the first time. Normal full charge time is 3 hrs. (approx.)IMPORTANT:(1) Charging indication will be delayed for a few minutes if the speakerphone has not been used for a long time or the battery is drained.(2) To  prolong  durability  of  battery,  it’s  recommended  to  charge  the 8. Connection/Link between Speakerphone and Mobile PhoneAfter  pairing  is  completed,  speakerphone  is always under  standby mode. Before  you  place  or  answer  a  call,  if  the  headset  icon  is  not  shown  on phone  screen,  please  follow  the  steps  below  to  activate  the  Bluetooth connection/link  through  your  mobile  phone  or  speakerphone  until  the headset icon is on the screen.(1) On phone: Select the “BT Speaker” from the paired list on your phone screen.(2) On  speakerphone:  Short  press  “MFB”  and  select  “Accept”  on  phone screen to accept connection.9. Disconnection between Speakerphone and Mobile PhoneWhen  you  need  to  connect  your  speakerphone  with  another  Bluetooth-enabled  mobile  phone,  please  follow  the  steps  below  to  disconnect  the speakerphone with the pre-paired mobile phone.(1) Power off the speakerphone.(2) Select  “Disconnecting”  on  the  Bluetooth  device  list  of  your  mobile phone to remove the connection.Note:  When  losing  the  connection/link,  the  speakerphone  will  be automatically power off in 15 minutes. The blue LED will flash twice in every 3 seconds when the speakerphone is not connected with mobile phone.10. Using the Speakerphone(1) Answering a CallWhen receiving a phone call, short press the  “MFB” button to  answer the call.(2) Ending a CallShort press the “MFB” button to end a call.(3) Reject a CallWhen you hear the ringing tone, press and hold the “MFB” button for 2 seconds to reject the call.(4) Voice DialIf  your  mobile  phone  is  voice  dialing  enabled,  under  standby  mode, short  press  the  “MFB”  button  and  say  the  voice  tag  after  you  hear  a beep.Note:  Please  make  sure  to  record voice  tag into the  mobile phone  before using  voice  dial  function.  Functionality  varies  depending  on  the  mobile phone models. Please refer to your mobile phone user guide for details.(5) Last Number Re-DialingUnder  standby  mode,  short  press  the  “MFB”  button  twice  for  last number redials.speakerphone  whenever  low  battery  is  encountered.  When  battery becomes  low,  LED  will  flash  red  every 3 seconds.  Under  low  battery condition,  if  speakerphone  is  continuously  used,  it’ll  decrease durability of  battery  as well as standby  time and  cause  longer charge time than normal 3 hrs.(3) The red LED will flash on while charging and flash off when charging is completed.6. Turning ON/OFF the SpeakerphonePower  On:  When  speakerphone  is  under  off  mode,  press  and  hold  the “MFB” for 4 seconds until you hear a short beep. The blue LED will flash 5 times,  and  then  the  speakerphone  will  automatically  connect  to  the  last connected mobile phone.Power  Off:  Speakerphone  is  under  standby  mode,  press  and  hold  the “MFB”  button  for  4 seconds until  you  hear  a short beep. The  red LED will flash 5 times before power off.7. PairingPrior  to  using  the  speakerphone  for  the  first  time,  you  must  pair  it  with  a Bluetooth-enabled  mobile  phone.  The  steps  below  describe  pairing instructions for a typical Bluetooth-enabled mobile phone.(1) Place the speakerphone and mobile phone no more than 1 meter apart.(2) Ensure the speakerphone is under OFF mode.(3) Press and hold the “MFB” button for 6 seconds until the LED flash red and blue alternatively, it is now ready for pairing.(4) Activate  the  Bluetooth  function  on  your  mobile  phone  and  search  fro accessible  Bluetooth  device  by  referring  to  your  mobile  phone  user guide for details.(5) Select “BT Speaker” from the list.(6) Enter  the  pre-programmed  code  “0000”  and  press  “OK”  to  pair  the speakerphone  and  the  phone.  When  pairing  is  completed,  the  blue and  red  LED  stop  flashing,  the  speakerphone  is  under  the  standby mode with the blue LED flashes in every 3 seconds.(7) Press “Return” to go  back to your mobile  phone’s main  menu. Please place  the  mobile  phone  and  the  speakerphone  within  10  meters sensing  distance.  You  should  now be  able  to  make  and receive  calls using your speakerphone.Note:  If the pairing cannot be completed  within 2 minutes after  the  pairing mode  is  activated,  the  speakerphone  will  power  off  automatically.  Please repeat steps above to pair the speakerphone and mobile phone again.(6) Adjusting the VolumeDuring a call, press the “V+” or “V-” buttons repeatedly until you reach the desired volume level.(7) Mute & Un-Mutea: Mute:  During  a  call,  short  press  the  “MUTE”  button  to  mute  the speakerphone. The red LED will flash on during mute mode.b: Un-Mute: Short press  the “MUTE” button during mute  mode to  un-mute the speakerphone.(8) Transferring Callsa: Speakerphone  to  Mobile Phone: During a  call,  press  both of  “V+” and “V-” buttons, and the call is routed to your mobile phone.b: Mobile  Phone  to  Speakerphone:  Press  both  of  “V+”  and  “V-” buttons to route the call to speakerphone.11. MultiPoint Feature(1)  Activate Multipoint ConnectionThe  default  setting  of  the  speakerphone's  multipoint  function  is  OFF. You  can  activate  the  multipoint  function  for  connecting  with  2  mobile phones at the same time.a. Multipoint ON: Under standby mode, press and hold "V+" button for 3 seconds until you hear a beep.b. Multipoint  OFF:  Under  standby  mode,  press  and  hold  "V-"  button for 3 seconds until you hear a beep. The speakerphone will turn off the multipoint function and power off automatically. When power on the speakerphone again,  it  will only connect to the last connected Bluetooth device.(2) Multipoint Pairinga. First  mobile  phone:  Pair  the  speakerphone  with  one  of  the Bluetooth-enabled mobile phones.b. Second  mobile  phone:  Power  OFF  the  speakerphone.  Press  and hold the "MFB" button for 5 seconds to enter pairing mode again to pair and connect with the second mobile phone.c. Connect with the first paired mobile phone to the speakerphone.(3) Multipoint Connection/Link with 2 Mobile PhonesAfter the multipoint function is activated, please follow the steps below to connect with 2 Bluetooth enabled mobile phones at the same time.When  power  on  the  speakerphone,  it  will  automatically  search  and connect the last 2 mobile phones that have been connected before.(4) Answer the Second Call during a Call (3 way call or two link function)When  receiving  a  second  call,  press  "MFB"  button  twice  to  hold  the first call on line and answer the second call.(5) Reject the Second Call during a Call (3 way call or two link function)When  receiving a second  call,  press and hold the  "MFB"  button for  3 seconds to reject the second mobile phone call.(6) Switch between 2 Phone Calls (3 way call or two link function)a. When having 2 calls on the line, press "MFB" button twice to switch between these 2 phone calls.b. When having 2 calls on the line, short press the "MFB" button once to end the current call and stay with the other call.NOTES:  When  the  multipoint  feature  using,  the  device  can  not  support three-way calling feature.12. Low Voltage Protection of BatteryWhen  the  voltage  of  battery  decreased  to  3.3V,  the  red  LED  will  flash  in every  3  seconds,  and  the  speakerphone  will  be  power  off  automatically when the voltage under 3.0V.13. Restore to Default SettingPlease  follow  the  steps  below  to  reset  the  speakerphone  to  its  original setting and remove all the previous pairing and connection.(1) Ensure the speakerphone is under standby mode.(2) Press and hold both  of  “V+” and  “V-”  buttons for  10  seconds until  the blue  and  red  LED  flash  5  times,  then  the  speakerphone  will  resume standby mode. The speakerphone is now back to original setting, and after  power  on  the  speakerphone  again,  it  will  enter  pairing  mode automatically.NOTES:  If  the  speakerphone  is  connected  with  a  mobile  phone  before restore  to  default  setting,  it  will  enter  pairing  mode  automatically  after restored  to  default.  If  the  speakerphone  is  not  connected  with  the  mobile phone before restore to default setting, it will be under standby mode after restored to default setting.14. LED Indication34567MULTIPOINTSPEAKERPHONE(1) (2)(3)(7)Mu ltip oin t Sp eak erp ho ne(6) (8)(4)(5)BC933M(2)(3) (8)(7) (6)(4)(1) (5)BC373MMult ipo int S peak erpho ne(5)(8)(7)(1)(6)(2)(3)(4)BC323MMult ipo int S peak erpho ne15. Product SpecificationBluetooth Compliance: Bluetooth V2.1+EDROperating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM bandOutput Power: Class 2, up to 10 metersSupport Profiles: HSP and HFP ProfilesSupport Multiple Paired Device: Memorize paired data of 8 Bluetooth phonesStand-by Time: Up to 1600 hours/ 66 daysTalk Time: Up to 12-14 hoursBattery Charging Time: About 3 hoursCharger Voltage: DC5.0V, 400mABattery: 650mA, BL-5B (Rechargeable Lithium-Ion Battery)Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the  following  two  conditions:  (1)  this  device  may  not  cause  harmful interference,  and  (2)  this  device  must  accept  any  interference  received, including interference that may cause undesired operation.This equipment complies with FCC radiation exposure limits set forth for an uncontrolled  environment.  End  user  must  follow  the  specific  operating instructions  for  satisfying  RF  exposure  compliance.  This  transmitter  must not  be  co-located  or  operating  in  conjunction  with  any  other  antenna  or transmitter.(2)(1) (5)(3) (8) (7) (6)(4)Mult ipo int S peak erpho neBC353BM(1) (5)(3) (8)(7) (6)(4)(2)Mult ipo int S peak erpho neBC353MBC373BM(3) (8) (7) (6)(4)(2)(1) (5)1. About Bluetooth SpeakerphoneThis  versatile  Bluetooth  speakerphone  is  specially  designed  for  user  to enjoy convenience and freedom of wireless communication. Dual capacity of use on desk-top like a Conference Speakerphone and in-car like a Hands-free  car  kit.  Advanced  built-in  microphone  with  D.S.P.  solution  for  Echo Cancellation  &  Noise  Suppression  that  gives  you  impeccable  full  duplex sound quality.2. About Bluetooth TechnologyBluetooth  wireless  technology  is  set  to  revolutionize  the  personal connectivity  by  providing  freedom  from  wired  connections-enabling  links and  connectivity  between  notebook/laptop,  mobile  phones,  portable handheld  devices  and  other  Bluetooth  enabled  devices  within  10  meters. Utilizing  global  sound  &  digital  data  2.4GHz  ISM  transmission,  it  makes global communication in the way you’ve never dreamed of!3. Getting to Know Your Bluetooth SpeakerphoneTo use your Bluetooth speakerphone, please follow these simple steps:(1) Charge  your  speakerphone.  Prior  to  using  the  speakerphone,  it  is recommended to charge the  battery fully for the first time. Normal full charge time is 3 hrs. (approx.)(2) Place  your  speakerphone  and  a  Bluetooth-enabled  mobile  phone within 1 meter for pairing.(3) Ensure  your  speakerphone  and  mobile  phone  is  placed  within  10 meters  Bluetooth  sensing  distance.  (Obstruction  could  cause  shorter sensing distance.)(1) Speaker(2) Microphone(3) LED(4) Charging Socket (5-pin USB)(5) Mute Button(6) MFB Button (Multi-Function Button)(7) Volume Increase (V+)(8) Volume Decrease (V-)5. Charging Your Bluetooth SpeakerphoneThe  Bluetooth  speakerphone  comes  with  a  rechargeable  battery.  Prior  to 4. Appearance and FunctionBC333M(8)(7) (6)(3) (4)(2)(5)(1)Mult ipoi nt Spe akerp honeSpeakerphone Status LED IndicationPower Off Mode OffPower On Blue LED flash 3 secondsPower Off Red LED flash 3 secondsStandby Mode Blue LED flash once every 3 secondsStandby (Disconnect Blue LED flash twice every 3 secondsBluetooth device)Standby-Low Voltage Red LED flash once every 3 secondsTalk in progress Blue LED flash once every 6 secondsPairing in progress The red and blue LED flash on alternativelyChargubg in progress Red LED steady onCharging completed OffSpeakerphone Status LED IndicationPower Off Mode OffPower On Blue LED flash 3 secondsPower Off Red LED flash 3 secondsStandby Mode Blue LED flash once every 3 secondsStandby (Disconnect Blue LED flash twice every 3 secondsBluetooth device)Standby-Low Voltage Red LED flash once every 3 secondsTalk in progress Blue LED flash once every 6 secondsPairing in progress The red and blue LED flash on alternativelyChargubg in progress Red LED steady onCharging completed Off

Navigation menu