Sunitec Enterprise BC009 Bluetooth SpeakerPhone User Manual FCC UM BC353BM Sunitec 091123

Download:
Mirror Download [FCC.gov]
Document ID	1238611
Application ID	GcbMhf6iiaUQE+CgY6f2mw==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	38.45kB (480588 bits)
Date Submitted	2010-02-07 00:00:00
Date Available	2010-02-08 00:00:00
Creation Date	2009-11-23 08:33:35
Producing Software	Corel PDF Engine Version 14.0.0.701
Document Lastmod	2009-11-23 08:33:59
Document Title	FCC-UM-BC353BM-Sunitec-091123
Document Creator	CorelDRAW
Document Author:	admin

(5)
(1)
(2)
Multipoint Speakerphone
BC333M
(1)
(5) (3)
(3) (4) (7) (8) (6)
Multipoint Speakerphone
(2)
BC323M
(5)
(1)
(4) (6) (7) (8)
MULTIPOINT
SPEAKERPHONE
(3) (4) (7) (8) (6)
(1)
(5)
(1)
Multipoint Speakerphone
(2)
BC373BM
speakerphone whenever low battery is encountered. When battery
becomes low, LED will flash red every 3 seconds. Under low battery
condition, if speakerphone is continuously used, it’ll decrease
durability of battery as well as standby time and cause longer charge
time than normal 3 hrs.
(3) The red LED will flash on while charging and flash off when charging is
completed.
(6) Adjusting the Volume
During a call, press the “V+” or “V-” buttons repeatedly until you reach
the desired volume level.
(7) Mute & Un-Mute
a: Mute: During a call, short press the “MUTE” button to mute the
speakerphone. The red LED will flash on during mute mode.
b: Un-Mute: Short press the “MUTE” button during mute mode to unmute the speakerphone.
(8) Transferring Calls
a: Speakerphone to Mobile Phone: During a call, press both of “V+”
and “V-” buttons, and the call is routed to your mobile phone.
b: Mobile Phone to Speakerphone: Press both of “V+” and “V-”
buttons to route the call to speakerphone.
(7) (5)
(1)
(5)
Multipoint Speakerphone
(2)
Multipoint Speakerphone
(2)
BC933M
(3) (4) (7) (8) (6)
(3)
(4)
(6)
(8)
6. Turning ON/OFF the Speakerphone
Power On: When speakerphone is under off mode, press and hold the
“MFB” for 4 seconds until you hear a short beep. The blue LED will flash 5
times, and then the speakerphone will automatically connect to the last
connected mobile phone.
Power Off: Speakerphone is under standby mode, press and hold the
“MFB” button for 4 seconds until you hear a short beep. The red LED will
flash 5 times before power off.
5. Charging Your Bluetooth Speakerphone
The Bluetooth speakerphone comes with a rechargeable battery. Prior to
7. Pairing
Prior to using the speakerphone for the first time, you must pair it with a
Bluetooth-enabled mobile phone. The steps below describe pairing
instructions for a typical Bluetooth-enabled mobile phone.
(1) Place the speakerphone and mobile phone no more than 1 meter apart.
(2) Ensure the speakerphone is under OFF mode.
(3) Press and hold the “MFB” button for 6 seconds until the LED flash red
and blue alternatively, it is now ready for pairing.
(4) Activate the Bluetooth function on your mobile phone and search fro
accessible Bluetooth device by referring to your mobile phone user
guide for details.
(5) Select “BT Speaker” from the list.
(6) Enter the pre-programmed code “0000” and press “OK” to pair the
speakerphone and the phone. When pairing is completed, the blue
and red LED stop flashing, the speakerphone is under the standby
mode with the blue LED flashes in every 3 seconds.
(7) Press “Return” to go back to your mobile phone’s main menu. Please
place the mobile phone and the speakerphone within 10 meters
sensing distance. You should now be able to make and receive calls
using your speakerphone.
Note: If the pairing cannot be completed within 2 minutes after the pairing
mode is activated, the speakerphone will power off automatically. Please
repeat steps above to pair the speakerphone and mobile phone again.
Appearance and Function
Speaker
Microphone
LED
Charging Socket (5-pin USB)
Mute Button
MFB Button (Multi-Function Button)
Volume Increase (V+)
Volume Decrease (V-)
12. Low Voltage Protection of Battery
When the voltage of battery decreased to 3.3V, the red LED will flash in
every 3 seconds, and the speakerphone will be power off automatically
when the voltage under 3.0V.
(3) (4) (8) (7) (6)
BC373M
4.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
9. Disconnection between Speakerphone and Mobile Phone
When you need to connect your speakerphone with another Bluetoothenabled mobile phone, please follow the steps below to disconnect the
speakerphone with the pre-paired mobile phone.
(1) Power off the speakerphone.
(2) Select “Disconnecting” on the Bluetooth device list of your mobile
phone to remove the connection.
Note: When losing the connection/link, the speakerphone will be
automatically power off in 15 minutes. The blue LED will flash twice in every 3
seconds when the speakerphone is not connected with mobile phone.
using the speakerphone, it is recommended to charge the battery fully for
the first time. Normal full charge time is 3 hrs. (approx.)
IMPORTANT:
(1) Charging indication will be delayed for a few minutes if the speakerphone
has not been used for a long time or the battery is drained.
(2) To prolong durability of battery, it’s recommended to charge the
(1)
User Manual
3. Getting to Know Your Bluetooth Speakerphone
To use your Bluetooth speakerphone, please follow these simple steps:
(1) Charge your speakerphone. Prior to using the speakerphone, it is
recommended to charge the battery fully for the first time. Normal full
charge time is 3 hrs. (approx.)
(2) Place your speakerphone and a Bluetooth-enabled mobile phone
within 1 meter for pairing.
(3) Ensure your speakerphone and mobile phone is placed within 10
meters Bluetooth sensing distance. (Obstruction could cause shorter
sensing distance.)
(5) Reject the Second Call during a Call (3 way call or two link function)
When receiving a second call, press and hold the "MFB" button for 3
seconds to reject the second mobile phone call.
(6) Switch between 2 Phone Calls (3 way call or two link function)
a. When having 2 calls on the line, press "MFB" button twice to switch
between these 2 phone calls.
b. When having 2 calls on the line, short press the "MFB" button once
to end the current call and stay with the other call.
NOTES: When the multipoint feature using, the device can not support
three-way calling feature.
10. Using the Speakerphone
(1) Answering a Call
When receiving a phone call, short press the “MFB” button to answer
the call.
(2) Ending a Call
Short press the “MFB” button to end a call.
(3) Reject a Call
When you hear the ringing tone, press and hold the “MFB” button for 2
seconds to reject the call.
(4) Voice Dial
If your mobile phone is voice dialing enabled, under standby mode,
short press the “MFB” button and say the voice tag after you hear a
beep.
Note: Please make sure to record voice tag into the mobile phone before
using voice dial function. Functionality varies depending on the mobile
phone models. Please refer to your mobile phone user guide for details.
(5) Last Number Re-Dialing
Under standby mode, short press the “MFB” button twice for last
number redials.
(3) (4) (8) (7) (6)
2. About Bluetooth Technology
Bluetooth wireless technology is set to revolutionize the personal
connectivity by providing freedom from wired connections-enabling links
and connectivity between notebook/laptop, mobile phones, portable
handheld devices and other Bluetooth enabled devices within 10 meters.
Utilizing global sound & digital data 2.4GHz ISM transmission, it makes
global communication in the way you’ve never dreamed of!
(5)
(2)
BC353BM
1. About Bluetooth Speakerphone
This versatile Bluetooth speakerphone is specially designed for user to
enjoy convenience and freedom of wireless communication. Dual capacity of
use on desk-top like a Conference Speakerphone and in-car like a Handsfree car kit. Advanced built-in microphone with D.S.P. solution for Echo
Cancellation & Noise Suppression that gives you impeccable full duplex
sound quality.
(2)
Multipoint Speakerphone
BC353M
8. Connection/Link between Speakerphone and Mobile Phone
After pairing is completed, speakerphone is always under standby mode.
Before you place or answer a call, if the headset icon is not shown on
phone screen, please follow the steps below to activate the Bluetooth
connection/link through your mobile phone or speakerphone until the
headset icon is on the screen.
(1) On phone: Select the “BT Speaker” from the paired list on your phone
screen.
(2) On speakerphone: Short press “MFB” and select “Accept” on phone
screen to accept connection.
11. MultiPoint Feature
(1) Activate Multipoint Connection
The default setting of the speakerphone's multipoint function is OFF.
You can activate the multipoint function for connecting with 2 mobile
phones at the same time.
a. Multipoint ON: Under standby mode, press and hold "V+" button for
3 seconds until you hear a beep.
b. Multipoint OFF: Under standby mode, press and hold "V-" button
for 3 seconds until you hear a beep. The speakerphone will turn off
the multipoint function and power off automatically. When power on
the speakerphone again, it will only connect to the last connected
Bluetooth device.
(2) Multipoint Pairing
a. First mobile phone: Pair the speakerphone with one of the
Bluetooth-enabled mobile phones.
b. Second mobile phone: Power OFF the speakerphone. Press and
hold the "MFB" button for 5 seconds to enter pairing mode again to
pair and connect with the second mobile phone.
c. Connect with the first paired mobile phone to the speakerphone.
(3) Multipoint Connection/Link with 2 Mobile Phones
After the multipoint function is activated, please follow the steps below
to connect with 2 Bluetooth enabled mobile phones at the same time.
When power on the speakerphone, it will automatically search and
connect the last 2 mobile phones that have been connected before.
(4) Answer the Second Call during a Call (3 way call or two link function)
When receiving a second call, press "MFB" button twice to hold the
first call on line and answer the second call.
13. Restore to Default Setting
Please follow the steps below to reset the speakerphone to its original
setting and remove all the previous pairing and connection.
(1) Ensure the speakerphone is under standby mode.
(2) Press and hold both of “V+” and “V-” buttons for 10 seconds until the
blue and red LED flash 5 times, then the speakerphone will resume
standby mode. The speakerphone is now back to original setting, and
after power on the speakerphone again, it will enter pairing mode
automatically.
NOTES: If the speakerphone is connected with a mobile phone before
restore to default setting, it will enter pairing mode automatically after
restored to default. If the speakerphone is not connected with the mobile
phone before restore to default setting, it will be under standby mode after
restored to default setting.
14. LED Indication
Speakerphone Status
LED Indication
Power Off Mode
Off
Power On
Blue LED flash 3 seconds
Power Off
Red LED flash 3 seconds
Standby Mode
Blue LED flash once every 3 seconds
Standby (Disconnect
Speakerphone
Status
Bluetooth
device)
Blue LED flash twice every 3 seconds
LED Indication
Power Off Mode
Standby-Low
Voltage
Power
Talk
in On
progress
Power Off
Pairing
in progress
Off
Red LED
6 flash once every 3 seconds
Blue LED flash 3 seconds
Blue LED flash once every 6 seconds
Red LED flash 3 seconds
The red and blue LED flash on alternatively
Blue LED flash once every 3 seconds
Red LED steady on
Blue LED flash twice every 3 seconds
Off
Standby Mode
Chargubg
in progress
Standby (Disconnect
Charging
completed
Bluetooth device)
Standby-Low Voltage
Red LED flash once every 3 seconds
Talk in progress
Blue LED flash once every 6 seconds
Pairing in progress
The red and blue LED flash on alternatively
Chargubg in progress
Red LED steady on
Charging completed
Off
15. Product Specification
Bluetooth Compliance: Bluetooth V2.1+EDR
Operating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM band
Output Power: Class 2, up to 10 meters
Support Profiles: HSP and HFP Profiles
Support Multiple Paired Device: Memorize paired data of 8 Bluetooth phones
Stand-by Time: Up to 1600 hours/ 66 days
Talk Time: Up to 12-14 hours
Battery Charging Time: About 3 hours
Charger Voltage: DC5.0V, 400mA
Battery: 650mA, BL-5B (Rechargeable Lithium-Ion Battery)
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. End user must follow the specific operating
instructions for satisfying RF exposure compliance. This transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-702
Create Date                     : 2009:11:23 08:33:35+08:00
Creator Tool                    : CorelDRAW
Modify Date                     : 2009:11:23 08:33:59+08:00
Metadata Date                   : 2009:11:23 08:33:59+08:00
Format                          : application/pdf
Creator                         : admin
Title                           : FCC-UM-BC353BM-Sunitec-091123
Producer                        : Corel PDF Engine Version 14.0.0.701
Document ID                     : uuid:cd8c0a5f-5fb3-4695-be0a-469f44833dfd
Instance ID                     : uuid:ffcd5ec3-117c-40bb-983d-9e4ba4e796e8
Page Count                      : 1
Author                          : admin

EXIF Metadata provided by EXIF.tools