Sunitec Enterprise BC010 Bluetooth Speakerphone User Manual

Sunitec Enterprise Co., Ltd. Bluetooth Speakerphone Users Manual

Users Manual

1 3254761. About Bluetooth SpeakerphoneThis versatile Bluetooth speakerphone is specially designed for the user to enjoy the convenience and freedom of wireless communication. This truly handsfree speakerphone has many applications in the home, oce, or car with any wireless Bluetooth compatible technologies. It has an advanced built-in microphone with Digital Sound Processor (DSP) solution for echo cancellation and noise suppression that gives you impeccable full duplex sound quality.2. About Bluetooth TechnologyBluetooth wireless technology is set to revolutionise personal connectivity by providing freedom from wired connections - enabling links and connectivity between notebook/laptop, mobile phones, portable handheld devices and other Bluetooth enabled devices within 10 metres. Utilising global sound and digital data 2.4GHz ISM transmission, it facilitates global communication in a way you have never dreamed of!3. Getting to Know Your Bluetooth SpeakerphoneTo use your Bluetooth speakerphone, please follow these simple steps:(1) Charge your speakerphone. Prior to using the speakerphone, it is recommended to charge the battery fully for the rst time. Normal full charge time is 2 hrs. (approx.) (2) Place your speakerphone and a Bluetooth-enabled device within 1 metre for pairing.(3) Ensure your speakerphone and Bluetooth-enabled device is placed within 10 metres during operation to ensure connectivity. (Obstructions could cause shorter sensing distances.)4. Appearance and Function(1) Speaker(2) Microphone(3) LED(4) Charging Socket (Micro 5-pin USB)(5) MFB Button (Multi-Function Button)(6) Volume Increase (V+)talk time and the standby time) will be extended continuously without any additional charge required by the car charger.WARNING: Do not attempt to charge the speakerphone with any charger other than the one provided. Using another charger may damage or destroy the speakerphone.7. Turning ON/OFF the SpeakerphonePower ON: When the speakerphone is in OFF mode, press and hold the “MFB” for 3 seconds until you hear a short beep. The ashing blue LED light indicator comes on, and then the speakerphone will automatically connect to the mobile phone which has been paired already.Power OFF: Speakerphone is under standby mode, press and hold the “MFB” button for 3 seconds until you hear a short beep. The flashing red LED light indication goes o.8. PairingPrior to using the speakerphone for the first time, you must pair it with a Bluetooth-enabled device. The steps below describe pairing instructions for a typical Bluetooth-enabled mobile phone.(1) Place the speakerphone and mobile phone no more than 1 metre apart.(2) Ensure the speakerphone is in the OFF mode.(3) Press and hold the “MFB” button for 5 seconds until the LED light ashes red and blue alternatively, indicating it is now ready for pairing.(4) Activate the Bluetooth function on your mobile phone and search for accessible Bluetooth devices, referring to your mobile phone user guide for details if required.(5) Select “BT Speaker” from the list.(6) Enter the pre-programmed code “0000” and press “OK” to pair the speakerphone and the mobile phone. When pairing is completed, the blue and red LED light will stop ashing, the speakerphone is in the standby mode with the blue LED light ashing every 3 seconds.(7) Press “Return” to go back to your mobile phone’s main menu. Place the mobile phone and the speakerphone within 10 metres sensing distance. You should now be able to make and receive calls using your speakerphone.Note: If the pairing cannot be completed within 2 minutes after the pairing mode is activated, the speakerphone will power OFF automatically. Please repeat the steps above to pair the speakerphone and mobile phone again.9. Connection/Link between Speakerphone and Mobile PhoneAfter pairing is completed, the speakerphone is always in standby mode. Before you place or answer a call, if the headset icon is not shown on the mobile phone screen, please follow the steps below to activate the Bluetooth connection/link through your mobile phone or speakerphone until the headset icon is on the screen.(1) On phone: Select the “BT Speaker” from the paired list on your phone screen.(2) On speakerphone: Short press “MFB” and select “Accept” on the phone screen to accept connection.10. Disconnection between Speakerphone and Mobile PhoneWhen you need to connect your speakerphone with another Bluetooth-enabled mobile phone, follow the steps below to disconnect the speakerphone with the pre-paired mobile phone.(1) Power OFF the speakerphone.(2) Select “Disconnecting” on the Bluetooth device list of your mobile phone to remove the connection.Note: When losing the connection/link, the speakerphone will automatically power OFF within 15 minutes. The blue LED light will ash twice every 3 seconds when the speakerphone is not connected with your mobile phone.11. Using the Speakerphone(1) Answering a CallWhen receiving a phone call, press the “MFB” button once to answer the call.(2) Ending a CallPress the “MFB” button once to end a call.(3) Reject a CallWhen you hear the ringing tone, press and hold the “MFB” button for 3 seconds to reject the call.(4) Voice DialIf your mobile phone has voice dialing enabled, in standby mode, press the “MFB” button once and say the voice tag after you hear a beep.Note: Please make sure to record voice tag into the mobile phone before When power on the speakerphone, it will automatically search and connect the last 2 mobile phones that have been connected before.(4) Reject the Second mobile phone CallWhen receiving a second call, press and hold the “MFB” button for 3 seconds to reject the second mobile phone call.(5) Answer the Second mobile phone CallWhen receiving a second call, press “MFB” button once to end the rst mobile phone call and answer the second mobile phone call.13. Low Voltage Protection of BatteryWhen the voltage of the battery has decreased to 3.3V, the red LED light will ash every 3 seconds, and the speakerphone will power OFF automatically when the voltage is under 3.0V.14. Restore to Default SettingPlease follow the steps below to reset the speakerphone to its original settings and remove all the previous pairing and connections.(1) Ensure the speakerphone is in standby mode.(2) Press and hold both “V+” and “V-” buttons simultaneously for 10 seconds until the blue and red LED lights ash 5 times, then the speakerphone will resume standby mode. The speakerphone is now back to it’s original settings, and after powering ON, the speakerphone will enter pairing mode automatically.Note: If the speakerphone is connected with a mobile phone before restoring the default settings, it will enter pairing mode automatically after restored to default. If the speakerphone is not connected with the mobile phone before restoring the default settings, it will be in standby mode after restoring the default settings.15. LED Light IndicatorsSpeakerphone Status LED IndicatorPower OFF Mode OFFPower ON Blue LED ash 3 secondsPower OFF Red LED ash 3 secondsStandby Mode Blue LED ash once every 3 secondsusing voice dial function. Functionality varies depending on the mobile phone model. Please refer to your mobile phone user guide for details.(5) Last Number Re-DialingIn standby mode, press the “MFB” button twice for last number dialed.(6) Adjusting the VolumeDuring a call, press the “V+” or “V-” buttons repeatedly until you reach the desired volume level.(8) Transferring Callsa: Speakerphone to Mobile Phone: During a call, press both “V+” and “V-” buttons simultaneously, and the call is routed to your mobile phone.b: Mobile Phone to Speakerphone: Press both “V+” and “V-” buttons simultaneously to route the call back to the speakerphone.12. MultiPoint Feature(1) Activate Multipoint ConnectionThe default setting of the speakerphone’s multipoint function is OFF. You can activate the multipoint function for connecting with 2 mobile phones at the same time.a. Multipoint ON: Under standby mode, press and hold “V+” button for 3 seconds until you hear a beep.b. Multipoint OFF: Under standby mode, press and hold “V-” button for 3 seconds until you hear a beep. The speakerphone will turn off the multipoint function and power off automatically. When power on the speakerphone again, it will only connect to the last connected Bluetooth device.(2) Multipoint Pairinga. First mobile phone: Pair the speakerphone with one of the Bluetooth-enabled mobile phones.b. Second mobile phone: Power OFF the speakerphone. Press and hold the “MFB” button for 5 seconds to enter pairing mode again to pair and connect with the second mobile phone.c. Connect with the rst paired mobile phone to the speakerphone.(3) Multipoint Connection/Link with 2 Mobile PhonesAfter the multipoint function is activated, please follow the steps below to connect with 2 Bluetooth enabled mobile phones at the same time.Standby (Disconnect Bluetooth Device) Blue LED ash twice every 3 secondsStandby-Low Voltage Red LED ash once every 3 secondsTalk in progress Blue LED ash once every 6 secondsPairing in progress The red and blue LED ash on alternatively Charging in progress Red LED steady onCharging completed O16. Product SpecicationBluetooth Compliance: Bluetooth V2.1+EDROperating Frequency Band: 2.4GHz ~ 2.48GHz unlicensed ISM bandOutput Power: Class 2, up to 10 metersSupport Proles: HSP and HFP ProlesSupport Multiple Paired Device: Memorize paired data of 8 Bluetooth phonesStand-by Time: Up to 1000 hours / 41 daysTalk Time: Up to 5 hoursBattery Charging Time: About 2 hours, Using solar power about 9 hoursCharger Voltage: DC5.0V, 400mABattery: 3.7V 340mA (Rechargeable Li-ion Polymer)Size: 100L x 48W x 11D mmWeight: TBDThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and(2) this device must accept any interference received, including interference that may cause undesired operation.You are cautioned that changes or modications not expressly approved by the part responsible for compliance could void the user's authority to operate the equipment.Sunitec Enterprise Co., Ltd(7) Volume Decrease (V-)(8) Solar Panel5. Recommend Installation PositionIt is recommended that the speakerphone is positioned on to the top of the left side of the windshield as shown in the pictures below:WARNING: Do not place or store the speakerphone over the area of the automobiles safety airbag deployment, or it may cause serious injury when a safety airbag deploys.6. Charging Your Bluetooth SpeakerphoneThe Bluetooth speakerphone comes with a built-in rechargeable battery. Prior to using the speakerphone, it is recommended to charge the battery fully for the rst time.Using the car charger• InsertthecarchargercompletelyintothechargingslotuntiltheLEDashred, and the speakerphone will be powered o automatically after connected with charger.• Normalfullchargetimeis2hours.(approx.),andtheLEDwillashowhencharge is completed.Using solar power• Directthesolarpanelonthebacksideofthespeakerphonetowardsun.(Please refer to the recommended installation position, as mentioned above.)• Ifthespeakerphonereceivessucientsunlightfor2hours,youcantalkforduration of up to 1 hour. Using solar power charge, the operation time (the "SOLAR-POWERED"MULTIPOINT SPEAKERPHONEUser ManualBC962S(1) (7)(8)(6)(3)/(5)(4)(2)2 3 451

Navigation menu