Sunitec Enterprise BC011 Solar Bluetooth Speakerphone User Manual Manual

Sunitec Enterprise Co., Ltd. Solar Bluetooth Speakerphone Manual

Manual

5. Recommend Installation PositionIt is recommended that the speakerphone is positioned on to the top of the left side of the windshield as shown in the pictures below:WARNING: Do not place or store the speakerphone over the area of the automobiles safety airbag deployment, or it may cause serious injury when a safety airbag deploys.6. Charging Your Bluetooth SpeakerphoneThe Bluetooth speakerphone comes with a built-in rechargeable battery. Prior to using the speakerphone, it is recommended to charge the battery fully for the rst time.Using the car charger• InsertthecarchargercompletelyintothechargingslotuntiltheLEDashred.• Normalfullchargetimeis2hours.(approx.),andtheLEDwillflashoffwhencharge is completed.Using solar power• Directthesolarpanelonthebacksideofthespeakerphonetowardsun.(Pleaserefertotherecommendedinstallationposition,asmentionedabove.)• Ifthespeakerphonereceivessufficientsunlightfor2hours,youcantalkfordurationofupto1hour.Usingsolarpowercharge,theoperationtime(thetalktimeandthestandbytime)willbeextendedcontinuouslywithoutanyadditionalcharge required by the car charger.WARNING: Do not attempt to charge the speakerphone with any charger other than the one provided. Using another charger may damage or destroy the speakerphone.7. Turning ON/OFF the SpeakerphonePower ON: When the speakerphone is in OFF mode, press and hold the “MFB” for 3 1. About Bluetooth SpeakerphoneThis versatile Bluetooth speakerphone is specially designed for the user to enjoy the convenience and freedom of wireless communication. This truly handsfree speakerphone has many applications in the home, oce, or car with any wireless Bluetooth compatible technologies. It has an advanced built-in microphone with DigitalSoundProcessor(DSP)solutionforechocancellationandnoisesuppressionthatgivesyouimpeccablefullduplexsoundquality.2. About Bluetooth TechnologyBluetooth wireless technology is set to revolutionize personal connectivity by providing freedom from wired connections - enabling links and connectivity between notebook/laptop, mobile phones, portable handheld devices and other Bluetooth enableddeviceswithin10meters.Utilizingglobalsoundanddigitaldata2.4GHzISMtransmission, it facilitates global communication in a way you have never dreamed of!3. Getting to Know Your Bluetooth SpeakerphoneTo use your Bluetooth speakerphone, please follow these simple steps:(1) Chargeyourspeakerphone.Priortousingthespeakerphone,itisrecommendedtochargethebatteryfullyforthefirsttime.Normalfullchargetimeis2hrs.(approx.)(2)Place your speakerphone and a Bluetooth-enabled device within 1 meter for pairing.(3) EnsureyourspeakerphoneandBluetooth-enableddeviceisplacedwithin10metersduringoperationtoensureconnectivity.(Obstructionscouldcauseshortersensingdistances.)4. Appearance and Function(1) Speaker(2) Microphone(3) LED(4) ModeButton(5) ChargingSocket(Micro5-pinUSB)(6) MFBButton(Multi-FunctionButton)(7) VolumeIncrease(V+)(8) VolumeDecrease(V-)(9) SolarPanel(10) Windshield Mount1 325476BC976S User Manualsecondsuntilyouhearashortbeep.TheashingblueLEDlightindicatorcomeson,and then the speakerphone will automatically connect to the mobile phone which has been paired already.Power OFF: Speakerphone is under standby mode, press and hold the “MFB” button for 3 seconds until you hear a short beep. Auto-Power ON: When the speakerphone was not powered off by pressing the “MFB” button, it would be power on and attempt to connect with the last connected mobilephonesautomaticallywhenthereareanysmallmovements(suchasmovethespeakerphone,closethecardoor,starttheengineandetc.)towakeupthespeakerphone. Note: When bring the speakerphone in travel or during transit, please press and hold the “MFB” to power o the speakerphone to avoid the speakerphone to be repeat power on/o during the trip.8. PairingPrior to using the speakerphone for the rst time, you must pair it with a Bluetooth-enabled device. The steps below describe pairing instructions for a typical Bluetooth-enabled mobile phone.(1) Placethespeakerphoneandmobilephonenomorethan1meterapart.(2) EnsurethespeakerphoneisintheOFFmode.(3) Pressandholdthe“MFB”buttonfor5secondsuntiltheLEDlightashesredandblue alternatively, indicating it is now ready for pairing.(4) ActivatetheBluetoothfunctiononyourmobilephoneandsearchforaccessibleBluetooth devices, referring to your mobile phone user guide for details if required.(5) Select“BTSpeaker”fromthelist.(6) Enterthepre-programmedcode“0000”andpress“OK”topairthespeakerphoneandthemobilephone.Whenpairingiscompleted,theblueandredLEDlightwillstopashing,thespeakerphoneisinthestandbymodewiththeblueLEDlightashingevery3seconds.(7) Press“Return”togobacktoyourmobilephone’smainmenu.Placethemobilephone and the speakerphone within 10 meters sensing distance. You should now be able to make and receive calls using your speakerphone.Note:Ifthepairingcannotbecompletedwithin2minutesafterthepairingmodeisactivated, the speakerphone will power OFF automatically. Please repeat the steps above to pair the speakerphone and mobile phone again.9. Connection/Link between Speakerphone and Mobile PhoneAfter pairing is completed, the speakerphone is always in standby mode. Before you place or answer a call, if the headset icon is not shown on the mobile phone screen, please follow the steps below to activate the Bluetooth connection/link through your mobile phone or speakerphone until the headset icon is on the screen.(1) Onphone:Selectthe“BTSpeaker”fromthepairedlistonyourphonescreen.(2) Onspeakerphone:Shortpress“MFB”andselect“Accept”onthephonescreentoaccept connection.10. Disconnection between Speakerphone and Mobile PhoneWhen you need to connect your speakerphone with another Bluetooth-enabled mobile phone, follow the steps below to disconnect the speakerphone with the pre-paired mobile phone.(1) PowerOFFthespeakerphone.(2) Select“Disconnecting”ontheBluetoothdevicelistofyourmobilephonetoremove the connection.Note: For power saving purpose, the speakerphone will automatically power OFF within2minutesafterlosingtheconnection/link.TheblueLEDlightwillashtwiceevery 3 seconds when the speakerphone is not connected with your mobile phone.11. Using the Speakerphone(1) AnsweringaCallWhen receiving a phone call, press the “MFB” button once to answer the call.(2) EndingaCallPress the “MFB” button once to end a call.(3) RejectaCallWhen you hear the ringing tone, press and hold the “MFB” button for 3 seconds to reject the call.(4) VoiceDialIf your mobile phone has voice dialing enabled, in standby mode, press the “MFB” button once and say the voice tag after you hear a beep.Note: Please make sure to record voice tag into the mobile phone before using voice dial function. Functionality varies depending on the mobile phone model. Please refer to your mobile phone user guide for details.(5) LastNumberRe-Dialingconnectwith2Bluetoothenabledmobilephonesatthesametime.When power on the speakerphone, it will automatically search and connect the last2mobilephonesthathavebeenconnectedbefore.(4) AnswertheSecondCallduringaCall(3waycallortwolinkfunction)When receiving a second call, press “MFB” button twice to hold the rst call on line and answer the second call.(5) RejecttheSecondCallduringaCall(3waycallortwolinkfunction)When receiving a second call, press and hold the “MFB” button for 3 seconds to reject the second mobile phone call.(6) Switchbetween2PhoneCalls(3waycallortwolinkfunction)a. Whenhaving2callsontheline,press“MFB”buttontwicetoswitchbetweenthese2phonecalls.b. Whenhaving2callsontheline,shortpressthe“MFB”buttononcetoendthecurrent call and stay with the other call.NOTES:Whenthemultipointfeatureusing,thedevicecannotsupportthree-waycalling feature.13. Low Voltage Protection of BatteryWhenthevoltageofthebatteryhasdecreasedto3.3V,theredLEDlightwillashevery 3 seconds, and the speakerphone will power OFF automatically when the voltageisunder3.0V.14. Restore to Default SettingPlease follow the steps below to reset the speakerphone to its original settings and remove all the previous pairing and connections.(1) Ensurethespeakerphoneisinstandbymode.(2) Pressandholdboth“V+”and“V-”buttonssimultaneouslyfor10secondsuntiltheblueandredLEDlightsash5times,thenthespeakerphonewillresumestandbymode.Thespeakerphoneisnowbacktoit’soriginalsettings,andafterpoweringON, the speakerphone will enter pairing mode automatically.Note: If the speakerphone is connected with a mobile phone before restoring the default settings, it will enter pairing mode automatically after restored to default. If the speakerphone is not connected with the mobile phone before restoring the default settings, it will be in standby mode after restoring the default settings.In standby mode, press the “MFB” button twice for last number dialed.(6) AdjustingtheVolumeDuringacall,pressthe“V+”or“V-”buttonsrepeatedlyuntilyoureachthedesiredvolume level.(7) TransferringCallsa: SpeakerphonetoMobilePhone:Duringacall,pressboth“V+”and“V-”buttons simultaneously, and the call is routed to your mobile phone.b: MobilePhonetoSpeakerphone:Pressboth“V+”and“V-”buttonssimultaneously to route the call back to the speakerphone.(8) Mute&Un-Mutea: Mute:Duringacall,shortpressthe“MODE”buttontomutethemicrophone.TheredLEDwillashonduringmutemode.b: Un-Mute:shortpressthe“MODE”buttonduringmutemodetoun-mutethemicrophone.12. MultiPoint Feature(1)ActivateMultipointConnectionThedefaultsettingofthespeakerphone’smultipointfunctionisOFF.Youcanactivatethemultipointfunctionforconnectingwith2mobilephonesatthesametime.a. MultipointON:Understandbymode,pressandhold“V+”buttonfor3seconds until you hear a beep.b. MultipointOFF:Understandbymode,pressandhold“V-”buttonfor3seconds until you hear a beep. The speakerphone will turn o the multipoint function and power off automatically. When power on the speakerphone again, it will only connect to the last connected Bluetooth device.(2) MultipointPairinga. First mobile phone: Pair the speakerphone with one of the Bluetooth-enabled mobile phones.b. Second mobile phone: Power OFF the speakerphone. Press and hold the “MFB” buttonfor5secondstoenterpairingmodeagaintopairandconnectwiththe second mobile phone.c. Connectwiththerstpairedmobilephonetothespeakerphone.(3) MultipointConnection/Linkwith2MobilePhonesAfter the multipoint function is activated, please follow the steps below to 15. LED Light IndicatorsSpeakerphone Status LEDIndicatorPower OFF Mode OFFPower ON BlueLEDash3secondsPower OFF OFFStandby Mode BlueLEDashonceevery3secondsStandby(DisconnectBluetoothDevice) BlueLEDashtwiceevery3secondsStandby-LowVoltage RedLEDashonceevery3secondsTalk in progress BlueLEDashonceevery6secondsPairing in progress TheredandblueLEDashonalternativelyCharginginprogress RedLEDsteadyonChargingcompleted OFF16. Product SpecicationBluetoothCompliance:BluetoothV2.1+EDROperatingFrequencyBand:2.4GHz~2.48GHzunlicensedISMbandOutputPower:Class2,upto10metersSupportProles:HSPandHFPProlesSupportMultiplePairedDevices:Memorizepaireddataof8BluetoothphonesAuto-Power-On FeatureStand-byTime:Upto1000hours/41daysTalkTime:Upto5hoursBatteryChargingTime:About2hours,Usingsolarpowerabout9hoursChargerVoltage:DC5.0V,400mABattery:3.7V340mA(RechargeableLi-ionPolymer)Size:100.5x49.2x13.4mmWeight:49g(excludedwindshieldmountholder)"SOLAR-POWERED" MULTIPOINT SPEAKERPHONE WITH AUTO-POWER-ON FEATURE(1)(2)(3)(7) (8)(6) (5)(10)(4)(9)41 2 35
FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to this equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the radio or television off and on, the user is encouraged to try to correct interference by one or more of the following measures: ‐ Reorient or relocate the receiving antenna. ‐ Increase the separation between the equipment and receiver. ‐ Connect the equipment into an outlet on another circuit. ‐ Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Navigation menu