Sunitec Enterprise BC011 Solar Bluetooth Speakerphone User Manual Manual

Sunitec Enterprise Co., Ltd. Solar Bluetooth Speakerphone Manual

Manual

5. Recommend Installation Position
It is recommended that the speakerphone is positioned on to the top of the left side
of the windshield as shown in the pictures below:
WARNING: Do not place or store the speakerphone over the area of the automobiles
safety airbag deployment, or it may cause serious injury when a safety airbag deploys.
6. Charging Your Bluetooth Speakerphone
The Bluetooth speakerphone comes with a built-in rechargeable battery. Prior to
using the speakerphone, it is recommended to charge the battery fully for the rst
time.
Using the car charger
• InsertthecarchargercompletelyintothechargingslotuntiltheLEDashred.
• Normalfullchargetimeis2hours.(approx.),andtheLEDwillflashoffwhen
charge is completed.
Using solar power
• Directthesolarpanelonthebacksideofthespeakerphonetowardsun.(Please
refertotherecommendedinstallationposition,asmentionedabove.)
• Ifthespeakerphonereceivessufficientsunlightfor2hours,youcantalkfor
durationofupto1hour.Usingsolarpowercharge,theoperationtime(thetalk
timeandthestandbytime)willbeextendedcontinuouslywithoutanyadditional
charge required by the car charger.
WARNING: Do not attempt to charge the speakerphone with any charger other than
the one provided. Using another charger may damage or destroy the speakerphone.
7. Turning ON/OFF the Speakerphone
Power ON: When the speakerphone is in OFF mode, press and hold the “MFB” for 3
1. About Bluetooth Speakerphone
This versatile Bluetooth speakerphone is specially designed for the user to enjoy
the convenience and freedom of wireless communication. This truly handsfree
speakerphone has many applications in the home, oce, or car with any wireless
Bluetooth compatible technologies. It has an advanced built-in microphone with
DigitalSoundProcessor(DSP)solutionforechocancellationandnoisesuppression
thatgivesyouimpeccablefullduplexsoundquality.
2. About Bluetooth Technology
Bluetooth wireless technology is set to revolutionize personal connectivity by
providing freedom from wired connections - enabling links and connectivity between
notebook/laptop, mobile phones, portable handheld devices and other Bluetooth
enableddeviceswithin10meters.Utilizingglobalsoundanddigitaldata2.4GHzISM
transmission, it facilitates global communication in a way you have never dreamed of!
3. Getting to Know Your Bluetooth Speakerphone
To use your Bluetooth speakerphone, please follow these simple steps:
(1) Chargeyourspeakerphone.Priortousingthespeakerphone,itisrecommended
tochargethebatteryfullyforthefirsttime.Normalfullchargetimeis2hrs.
(approx.)
(2)
Place your speakerphone and a Bluetooth-enabled device within 1 meter for pairing.
(3) EnsureyourspeakerphoneandBluetooth-enableddeviceisplacedwithin10
metersduringoperationtoensureconnectivity.(Obstructionscouldcause
shortersensingdistances.)
4. Appearance and Function
(1) Speaker
(2) Microphone
(3) LED
(4) ModeButton
(5) ChargingSocket(Micro5-pinUSB)
(6) MFBButton(Multi-FunctionButton)
(7) VolumeIncrease(V+)
(8) VolumeDecrease(V-)
(9) SolarPanel
(10)
Windshield Mount
1 3
2
5
4
7
6
BC976S User Manual
secondsuntilyouhearashortbeep.TheashingblueLEDlightindicatorcomeson,
and then the speakerphone will automatically connect to the mobile phone which
has been paired already.
Power OFF: Speakerphone is under standby mode, press and hold the “MFB” button
for 3 seconds until you hear a short beep.
Auto-Power ON: When the speakerphone was not powered off by pressing the
“MFB” button, it would be power on and attempt to connect with the last connected
mobilephonesautomaticallywhenthereareanysmallmovements(suchasmove
thespeakerphone,closethecardoor,starttheengineandetc.)towakeupthe
speakerphone.
Note: When bring the speakerphone in travel or during transit, please press and hold
the “MFB” to power o the speakerphone to avoid the speakerphone to be repeat
power on/o during the trip.
8. Pairing
Prior to using the speakerphone for the rst time, you must pair it with a Bluetooth-
enabled device. The steps below describe pairing instructions for a typical Bluetooth-
enabled mobile phone.
(1) Placethespeakerphoneandmobilephonenomorethan1meterapart.
(2) EnsurethespeakerphoneisintheOFFmode.
(3) Pressandholdthe“MFB”buttonfor5secondsuntiltheLEDlightashesredand
blue alternatively, indicating it is now ready for pairing.
(4) ActivatetheBluetoothfunctiononyourmobilephoneandsearchforaccessible
Bluetooth devices, referring to your mobile phone user guide for details if
required.
(5) Select“BTSpeaker”fromthelist.
(6) Enterthepre-programmedcode“0000”andpress“OK”topairthespeakerphone
andthemobilephone.Whenpairingiscompleted,theblueandredLEDlightwill
stopashing,thespeakerphoneisinthestandbymodewiththeblueLEDlight
ashingevery3seconds.
(7) Press“Return”togobacktoyourmobilephone’smainmenu.Placethemobile
phone and the speakerphone within 10 meters sensing distance. You should now
be able to make and receive calls using your speakerphone.
Note:Ifthepairingcannotbecompletedwithin2minutesafterthepairingmodeis
activated, the speakerphone will power OFF automatically. Please repeat the steps
above to pair the speakerphone and mobile phone again.
9. Connection/Link between Speakerphone and Mobile Phone
After pairing is completed, the speakerphone is always in standby mode. Before you
place or answer a call, if the headset icon is not shown on the mobile phone screen,
please follow the steps below to activate the Bluetooth connection/link through your
mobile phone or speakerphone until the headset icon is on the screen.
(1) Onphone:Selectthe“BTSpeaker”fromthepairedlistonyourphonescreen.
(2) Onspeakerphone:Shortpress“MFB”andselect“Accept”onthephonescreento
accept connection.
10. Disconnection between Speakerphone and Mobile Phone
When you need to connect your speakerphone with another Bluetooth-enabled
mobile phone, follow the steps below to disconnect the speakerphone with the pre-
paired mobile phone.
(1) PowerOFFthespeakerphone.
(2) Select“Disconnecting”ontheBluetoothdevicelistofyourmobilephoneto
remove the connection.
Note: For power saving purpose, the speakerphone will automatically power OFF
within2minutesafterlosingtheconnection/link.TheblueLEDlightwillashtwice
every 3 seconds when the speakerphone is not connected with your mobile phone.
11. Using the Speakerphone
(1) AnsweringaCall
When receiving a phone call, press the “MFB” button once to answer the call.
(2) EndingaCall
Press the “MFB” button once to end a call.
(3) RejectaCall
When you hear the ringing tone, press and hold the “MFB” button for 3 seconds to
reject the call.
(4) VoiceDial
If your mobile phone has voice dialing enabled, in standby mode, press the “MFB”
button once and say the voice tag after you hear a beep.
Note: Please make sure to record voice tag into the mobile phone before using
voice dial function. Functionality varies depending on the mobile phone model.
Please refer to your mobile phone user guide for details.
(5) LastNumberRe-Dialing
connectwith2Bluetoothenabledmobilephonesatthesametime.
When power on the speakerphone, it will automatically search and connect the
last2mobilephonesthathavebeenconnectedbefore.
(4) AnswertheSecondCallduringaCall(3waycallortwolinkfunction)
When receiving a second call, press “MFB” button twice to hold the rst call on
line and answer the second call.
(5) RejecttheSecondCallduringaCall(3waycallortwolinkfunction)
When receiving a second call, press and hold the “MFB” button for 3 seconds to
reject the second mobile phone call.
(6) Switchbetween2PhoneCalls(3waycallortwolinkfunction)
a. Whenhaving2callsontheline,press“MFB”buttontwicetoswitchbetween
these2phonecalls.
b. Whenhaving2callsontheline,shortpressthe“MFB”buttononcetoendthe
current call and stay with the other call.
NOTES:Whenthemultipointfeatureusing,thedevicecannotsupportthree-way
calling feature.
13. Low Voltage Protection of Battery
Whenthevoltageofthebatteryhasdecreasedto3.3V,theredLEDlightwillash
every 3 seconds, and the speakerphone will power OFF automatically when the
voltageisunder3.0V.
14. Restore to Default Setting
Please follow the steps below to reset the speakerphone to its original settings and
remove all the previous pairing and connections.
(1) Ensurethespeakerphoneisinstandbymode.
(2) Pressandholdboth“V+”and“V-”buttonssimultaneouslyfor10secondsuntilthe
blueandredLEDlightsash5times,thenthespeakerphonewillresumestandby
mode.Thespeakerphoneisnowbacktoit’soriginalsettings,andafterpowering
ON, the speakerphone will enter pairing mode automatically.
Note: If the speakerphone is connected with a mobile phone before restoring the
default settings, it will enter pairing mode automatically after restored to default.
If the speakerphone is not connected with the mobile phone before restoring the
default settings, it will be in standby mode after restoring the default settings.
In standby mode, press the “MFB” button twice for last number dialed.
(6) AdjustingtheVolume
Duringacall,pressthe“V+”or“V-”buttonsrepeatedlyuntilyoureachthedesired
volume level.
(7) TransferringCalls
a: SpeakerphonetoMobilePhone:Duringacall,pressboth“V+”and“V-”
buttons simultaneously, and the call is routed to your mobile phone.
b: MobilePhonetoSpeakerphone:Pressboth“V+”and“V-”buttons
simultaneously to route the call back to the speakerphone.
(8) Mute&Un-Mute
a: Mute:Duringacall,shortpressthe“MODE”buttontomutethemicrophone.
TheredLEDwillashonduringmutemode.
b: Un-Mute:shortpressthe“MODE”buttonduringmutemodetoun-mutethe
microphone.
12. MultiPoint Feature
(1)ActivateMultipointConnection
Thedefaultsettingofthespeakerphone’smultipointfunctionisOFF.Youcan
activatethemultipointfunctionforconnectingwith2mobilephonesatthesame
time.
a. MultipointON:Understandbymode,pressandhold“V+”buttonfor3
seconds until you hear a beep.
b. MultipointOFF:Understandbymode,pressandhold“V-”buttonfor3
seconds until you hear a beep. The speakerphone will turn o the multipoint
function and power off automatically. When power on the speakerphone
again, it will only connect to the last connected Bluetooth device.
(2) MultipointPairing
a. First mobile phone: Pair the speakerphone with one of the Bluetooth-enabled
mobile phones.
b. Second mobile phone: Power OFF the speakerphone. Press and hold the “MFB”
buttonfor5secondstoenterpairingmodeagaintopairandconnectwith
the second mobile phone.
c. Connectwiththerstpairedmobilephonetothespeakerphone.
(3) MultipointConnection/Linkwith2MobilePhones
After the multipoint function is activated, please follow the steps below to
15. LED Light Indicators
Speakerphone Status LEDIndicator
Power OFF Mode OFF
Power ON BlueLEDash3seconds
Power OFF OFF
Standby Mode BlueLEDashonceevery3seconds
Standby(DisconnectBluetooth
Device) BlueLEDashtwiceevery3seconds
Standby-LowVoltage RedLEDashonceevery3seconds
Talk in progress BlueLEDashonceevery6seconds
Pairing in progress TheredandblueLEDashonalternatively
Charginginprogress RedLEDsteadyon
Chargingcompleted OFF
16. Product Specication
BluetoothCompliance:BluetoothV2.1+EDR
OperatingFrequencyBand:2.4GHz~2.48GHzunlicensedISMband
OutputPower:Class2,upto10meters
SupportProles:HSPandHFPProles
SupportMultiplePairedDevices:Memorizepaireddataof8Bluetoothphones
Auto-Power-On Feature
Stand-byTime:Upto1000hours/41days
TalkTime:Upto5hours
BatteryChargingTime:About2hours,Usingsolarpowerabout9hours
ChargerVoltage:DC5.0V,400mA
Battery:3.7V340mA(RechargeableLi-ionPolymer)
Size:100.5x49.2x13.4mm
Weight:49g(excludedwindshieldmountholder)
"SOLAR-POWERED" MULTIPOINT
SPEAKERPHONE
WITH AUTO-POWER-ON
FEATURE
(1)
(2)
(3)
(7) (8)
(6) (5)
(10)
(4)
(9)
41 2 3
5
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference
received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B Digital Device,
pursuant to Part 15 of the FCC Rules. These limits are designed to this equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the radio or television off and on, the user is
encouraged to try to correct interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on another circuit.
‐ Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.

Navigation menu