Sunmi Technology M1 Wireless data ordering system User Manual

Shanghai Sunmi Science and Technology Co.,Ltd. Wireless data ordering system Users Manual

Users Manual

M1 User GuideHazardous/Toxic Substances and Content Table of the Product Contents of Package Warranty Card Product technical indexWarranty Card Product Name: Product Model: Product No.: Purchase Date: Warranty Period: Warranty service by our company is available within ___ days upon purchasing. Free warranty is not provided in following conditions: · Products are disassembled and repaired without permission. · Product barcode and fragile sticker are damaged, and the warranty card is obliterated or broken. · Malfunction caused by operations without complying with requirements in the manual. · Malfunction caused by water soaking or falling, and man-made damage like scratching or breaking. · Malfunction or damage caused by force majeure. · Beyond the warranty period.Contact Methods: · Business address: · Telephone number: Statement The company is not responsible for the following behaviors: ·Damages caused by using and maintaining the device without following the User Guide; ·Damages or problems caused by selection of objects or Consumables (products which are not the initial ones provided or recognized by the company). In this case, the company will not undertake any responsibility. No one is entitled to modify or change the product unless permitted by the company. Disclaimer Discrepancies between the product and the file concerning detail s may raise due to product updates. Please be subject to the material object. The company reserves the right to interpret the file and the right to revise this manual withou t prior notices. Products reaching or beyond service life for environmental protection shall not be discarded anyhow but recycled as per the stipulations set out in the Control and Administrative Measures on Electronic Information Products. Body*1 User Guide*1 (including Contents of Package, Warranty Card and Product Certificate) Charging dock*1 Indicates that the concentration of the hazardous substances in all homogeneous materials in the parts is below the relevant threshold of the SJ/T11363-2006. Indicates that the concentration of the hazardous substances of at least one of all homogeneous materials in the parts is above the relevant threshold of the SJ/T11363-2006; However, the content of the parts marked with "×" is above the standard due to the fact that there is not mature alternative technologies in the industry. Parts Name Circuit card assembly Lead（Pb）Mercury(Hg)Cadmium(Cd)Hexavalent chromium (Cr(VII)Polybrominatedbiphenyls (PBB)Polybrominated diphenyl ethers (PBDE)Hazardous/Toxic Substances or Elements WIFICameraFLASHBatteryO/SCPU FrequencyButtonMircrophoneLCD ScreenBlueboothSpeakerRAMInterfaceTouch screen3GWIFI 802.11b/g/n（2.4G）200W FF Macro4GB Nand Flash3.7V/3000mAhAndroid 5.11.3GHZ Quad Core1xpower button 、1xscan button1xMIC,Acoustic Wave Payment Supported4.5''TN,FWVGA 854*480Bluetooth3.0/4.0，IBEACON supportedSingle Track 1W,Volume Up to 90 DB(Adjustable）512MB DDR2Micro USB Debug Port,SIM card slot,4 section headphone hole,charging thimbleCapacity Dual-point Touch screenGSM 900/1800/850/1900、WCDMA 850/1900DimensionThimble Type Charging BaseTerminal：length148mm*width73mm*height23mmCharging Base：Length104mm*Width74mm*Height 68mmINPUT：AC100~240V/1.5A 50/60HzOUTPUT：DC5V/1ACPU MTK MT6580MConfiguration Main specificationsFCC Regulations:This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:-Reorient or relocate the receiving antenna.-Increase the separation between the equipment and receiver.-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.-Consult the dealer or an experienced radio/TV technician for help.Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.FCC RF Exposure Information (SAR)This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device is set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage near the body with the separation of 5 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the while operating can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.The exposure standard for wireless employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: 2AH25M1.For this device, the highest reported SAR value for usage near the body is 1.20 W/kg.While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement.SAR compliance for body operation is based on a separation distance of 5 mm between the unit and the human body. Carry this device, at least 5 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 5 mm between this and your body. SUNMI W5910

Navigation menu