Sunmi Technology V1SNFC Wireless data POS System User Manual 04 V1S UM 20180130

Download:
Mirror Download [FCC.gov]
Document ID	3808579
Application ID	ClaQE2Tqg5k9Qg2Wi9EVMg==
Document Description	04 V1S UM 20180130
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.26kB (790726 bits)
Date Submitted	2018-04-08 00:00:00
Date Available	2018-04-11 00:00:00
Creation Date	2018-01-30 14:21:39
Producing Software	Adobe PDF library 15.00
Document Lastmod	2018-01-30 14:21:40
Document Title	V1S英文通用用户指南(NFC专用)_20180130
Document Creator	Adobe Illustrator CC 2015 (Macintosh)

Name and Content of Toxic or Harmful
Substances in this Product
Product introduction
①
USB interface
Opening handle
Printer
NFC reader
Charging adapter
Flashlight
Lead
（Pb）
Printing paper
③
Power button
SIM card slot
Volume button
Power supply socket
Cadmium
(Cd)
Instructions for recharging and battery
Printing instructions
Battery
Strap ring
Battery cover
Return button Home button Menu button
Power button
Short press: wake up the screen, lock the screen.
Long press: long press for 2-3 seconds in power off mode
to switch on the device.
Long press for 2-3 seconds in normal operation
mode to select power off or reboot.
Long press for 11 seconds when system is
frozenfor automatic reboot.
Volume button
Volume adjustment (with app support, the button can be set
as quick code scan button).
Printer
For printing sales slips in power on mode.
Return button
Tap to return to the previous screen.
Home button
Tap to quickly view the background programs;
Select the app and slide laterally to close.
Type-C interface
For device recharging and developer debugging.
Camera
For QR scan and taking pic.
Flashlight
For lighting in camera mode.
SIM card slot
Note: To prevent system errors, please make sure the device
is turned off when you insert or remove the SIM card.
· Move SIM card cover horizontally to open;
· Insert/remove SIM card in the direction as shown;
· Fasten the battery cover horizontally.
Battery
Avoid contact with water, metal objects and other electrically
charged equipment while in use.
Strap ring
For fixing handheld strap to prevent slippage.
(This accessory shall be purchased separately)
Extended interface
For connecting the pedestal.
(This accessory shall be purchased separately)
Mercury
(Hg)
②
SIM
Speaker
Components of circuit board
Camera
Extended interface
Type-C USB
interface
Toxic or Harmful
Substances
or Elements
Part Name
This device supports 58mm thermal paper with the specifications of
57±0.5mm*Ø40mm
· Please open the paper container with the uncovering handle (as
shown in Fig.1). Please do not force open the paper container to
avoid print head gear wear;
· Feed the paper correctly into the paper container in the direction as shown, and pull some paper outside the cutter (as shown
in Fig.2);
· Close the cover of the paper container to finish printing paper
feeding (as shown in Fig.3).
Note: If the printed paper is blank, please check whether the
paper roll has been installed in the correct direction.
Simplified settings
A few steps for starting the smart business device
①2G/3G settings: insert the corresponding 2G (GSM)/3G (GSM)
card in power off mode and reboot your device. (For more details
about supported cards, please read the technical specifications)
②Press the power button for 2-3 seconds to wake up the
screen,enter the initial boot interface, and follow the prompts.
This device offers two network patterns.
③WIFI settings
· Tap [Settings] button and turn on WLAN to enter WLAN search
interface,and wait until it finds and lists the available WLAN
hotspots;
· Tap the WLAN that you want to connect — you need to enterthe
access code if you choose an encrypted network.
How to download/use apps
Open App Market to browse, download and install the apps in
online mode.
This device supports charging only by USB cable
· Connect the 5V adapter to the power supply socket;
· Connect the USB cable to the USB interface of the device
for recharging;
· The screen will display the recharging icon during the
recharging process;
· If the recharging icon does not appear, please check whether the USB interface is well connected.
Instructions/Notes for battery
· This device adopts 3.6V/5200mAh lithium battery; please do
not disassemble the battery.
· In order to protect the battery life, we recommend that you
recharge the device whenever possible, and please do not
allow the battery to fully drain before recharging.
Trouble shooting
Printer not working
· Make sure the cover of the paper container is properly closed;
· Make sure the right printing paper is used and properly fed;
· Check whether 58mm*40mm thermal paper roll is fed into the
paper container;
· Note: If the printed paper is blank, please check whether the
paper roll has been installed in the correct direction.
The device cannot be switched on (e.g. exhausted
battery)
· Connect the device properly with a USB cable to recharge for
three minutes;
· Check whether the screen is displaying recharging status.
What to do if the system freezes
Hexavalent
chromium
(Cr(VII)
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Means that the content of the toxic or harmful substance
in all homogeneous materials of this part is below the limit
stipulated in SJ/T11363-2006.
Means that the content of the toxic or harmful substance in
at least one of the homogeneous materials of this part is
beyond the limit stipulated in SJ/T11363-2006; but as for
the component marked with “×” on the table, the content is
beyond the l imit since there is no alternative mature
technology in the industry yet.
The products reaching or exceeding the environmental service life
shall be recycled per “Regulations on the Control and Management
of Electronic Information Products” and shall not be littered.
Product Technical Data
Item
Technical Specifications
Operating
System
Android 6.0
CPU
MTK MT6580
CPU basic
frequency
1.3GHZ quad-core
RAM
1GB LPDDR3
FLASH
8GB Nand Flash
Display
5.5-in IPS, 1280*720 resolution
Touch screen
Capacitive multi-touch screen
Camera
5.0M AF
Speaker
90dB
Microphone
MIC
Wireless Data
GSM (850/900/1800/1900)
WCDMA (850/900/1900/2100）
Wi-Fi
Built-in Wi-Fi 802.11b/g/n (2.4G)
Bluetooth
Supports Bluetooth 3.0/4.0, supports iBeacon
NFC
Only M1 cards are supported
Buttons
Power button, scan button
Interfaces
Tpre-C interface and SAM card
Printing
method
Line thermal printing
Printing paper
specifications
Width 58mm, maximum diameter 40mm
Battery
3.6V/5200mAh
Dimensions
211mm(L)*83mm(W)*54mm(H)
Adapter
OUTPUT：DC 5V/2A
INPUT：AC 100~240V/0.3A 50/60Hz
Press the power button for 11 seconds to reboot.
Please read “Help App” in the device
for more information on user’s guidance
Packing list:
V1S*1
User mannual*1
Power adaptor*1
USB cable*1
Precautions
Safety Warning
· Connect the AC plug to the AC socket corresponding to
the marked input of the power adapter;
· Do not use in the presence of any potentially explosive gas;
· To avoid injury, unauthorized persons shall not open the
power adapter;
· This is a Class A product. This product may cause radio
interference in living environments. In that case, the user may
be required to take adequate measures against interference.
· Battery replacement:
1.Explosion danger may arise if replacing with the wrong
battery!
2.The replaced battery shall be disposed of by maintenance personnel, and please do not throw it into fire!
Significant Safety Instructions
·This terminal is a handheld device, and the user shall protect the password from being peered at by others while
entering the password;
· Do not install or use the device during lightning storms to
avoid the potential risks of lightning shock;
· Please turn off the power immediately if you notice
abnormal odor, heat or smoke;
· The paper cutter is sharp, please do not touch!
Suggestions
· Do not use the terminal near water or moisture to prevent
liquid from falling into the terminal;
· Do not use the terminal in extremely cold or hot environments, such as near flames or lit cigarettes;
· Do not drop, throw or bend the device;
· Use the terminal in a clean and dust-free environment if
possible to prevent small items from falling into the terminal;
· Please do not use the terminal near medical equipment
without permission.
Statements
The Company does not assume responsibilities for the
following actions:
· Damages caused by use and maintenance without complying with the conditions specified in this guide;
· The Company will not assume any responsibilities for the
damages or problemscaused by optional items or consumables (rather than the initial products or approvedproducts of
the Company). The customer is not entitled to change or
modify the product without our consent.
· The product’ s operating system supports official systemupdates, but if you change the operating system into a
third party ROM system or alter the system files by system
cracking, it may cause system instability and security risks
and threats.
Disclaimer
As a result of product upgrading, some details in this document may not match the product, and the actual product
shall govern. The Company reserves the right of interpretation of this document. The Company also reserves the right
toalter this specification without prior notice.
CE certification information (SAR)
This device was tested for typical body-worn operations with the back
of the handset kept 0cm away. To maintain compliance with RF
exposure requirements, use accessories that maintain a 0cm separation
distance between the user's body and the back of the handset. The use
of belt clips, holsters and similar accessories should not contain metallic
components in its assembly. The use of accessories that do not satisfy
these requirements may not comply with RF exposure requirements, and
should be avoided.
If you are using pacemaker, hearing aid, cochlear implant or other
device, please use the phone according to the doctor’s advice.
PRODUCT SAFETY WARNINGS
Use responsibly. Read all instructions and safety information before use
to avoid injury.The maximum operating ambient temperature of the
equipment declared by the manufacturer is 0-35dgree.
Battery safety
Battery only at ambient temperatures ranging from 0°C to 35°C.
(1) CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery recommended
by the manufacturer. Dispose of used batteries according to battery
manufacturer’s instructions.
(2) CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
(3) CAUTION:Battery charging temperature upper limit is 35°C.
Adapter safety
When charging, please place the device in an environment that has a
normal room temperature and good ventilation. It is recommended to
charge the device in an environment with a temperature that ranges
from 0°C~35°C.
For altitude 2km below use only
WARNING:For matched equipments and indoor use only.
Camflash safety
LED is only used as indicating light.
Wi-Fi Safety
Turn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may
cause interference or danger, such as in airplanes while flying.
Declaration of Conformity
Hereby, Shanghai Sunmi Technology Co., Ltd. declares that the smart
POS system(Model No.:W5920) is in compliance with the essential
requirements and other relevant provisions of RED 2014/53/EU.
Technical features and characteristics
The product includes the following features and characteristics:
GSM:
-Operation Frequency:GSM850:824-849MHz/GSM900:880-915MHz/
DCS1800:1710-1785MHz/PCS1900:1850-1900MHz
-Transmitted Power:GSM850:32.9dBm/EGSM900:32.52dBm/
DCS1800:28.90dBm/PCS1900:29.48dBm
WCDMA:
-Operation Frequency:WCDMA2100:1920-1980MHz/
WCDMA1900:1800-1910MHz/
WCDMA850:824-849MHz/
MCDMA900:880-915MHz
-Transmitted Power:WCDMA2100:22.68dBm/WCDMA1900:21.41dBm/
WCDMA850:23.29dBm/WCDMA900:22.67dBm
Wifi:
-Operation Frequency: 2412MHz-2462MHz
-Transmitted Power: CE:13.33dBm
BT/BLE:
-Operation Frequency: 2402-2480MHz
-Transmitted Power: CE BT:3.3dBm/CE BLE:-5.83dBm
GPS:
-Operation Frequency: 1575.42MHz
NFC:
13.56MHz -15.335MHz
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject
to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate the
equipment.
The antenna(s) used for this transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
The country code selection is for non-US model only and is not available
to all US model. Per FCC regulation, all WiFi product marketed in US
must fixed to US operation channels only.
RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio
waves.
This device is designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by the Federal
Communications Commission of the U.S. Government.
The exposure standard for wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set
by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard
operating positions accepted by the FCC with the device transmitting at
its highest certified power level in all tested frequency bands. Although
the SAR is determined at the highest certified power level, the actual
SAR level of the device while operating can be well below the maximum
value. This is because the device is designed to operate at multiple
power levels so as to use only the poser required to reach the network.
In general, the closer you are to a wireless base station antenna, the
lower the power output.
While there may be differences between the SAR levels of various
devices and at various positions, they all meet the government
requirement.
For body worn operation, this device has been tested and meets the FCC
RF exposure guidelines for use with an accessory that contains no metal
and be positioned a minimum of 0cm from the body. Use of other
accessories may not ensure compliance with FCC RF exposure
guidelines. If you do not use a body-worn accessory and are not holding
the device at the ear, position the handset a minimum of 0cm from your
body when the device is switched on.
PRODUCT SAFETY WARNINGS
Use responsibly. Read all instructions and safety information before use
to avoid injury.The maximum operating ambient temperature of the
equipment declared by the manufacturer is 35°C.
Battery safety
Charge battery only at ambient temperatures ranging from 0°C to 40°C.
(1)CAUTION: Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type of battery recommended
by the manufacturer. Dispose of used batteries according to battery
manufacturer’s instructions.
(2)CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
(3) CAUTION:Charging temperature upper limit is 35°C.
Charger safety
When charging, please place the device in an environment that has a
normal room temperature and good ventilation. It is recommended to
charge the device in an environment with a temperature that ranges
from 0°C~35°C.
Camflash safety
LED is only used as indicating light.
Wi-Fi Safety
Turn Wi-Fi off in areas where Wi-Fi use is prohibited or when it may
cause interference or danger, such as in airplanes while
flying.
Notice for Canada
This device complies with Industry Canada’s licence-exempt RSSs.
Operation is subject to the following two conditions:
(1)This device may not cause interference; and(2)This device must
accept any interference, including interference that may cause
undesired operation of the device.
This equipment complies with IC radiation exposure limits set forth for
an uncontrolled environment. End user must follow the specific
operating instructions for satisfying RF exposure compliance. This
transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
These requirements set a SAR limit of 1.6 W/kg averaged over one gram
of tissue.
The highest SAR value for this device on the body is 1.441W/Kg. This
device was tested for typical body-worn operations. To comply with RF
exposurerequirements, a minimum separation distance of 0mm must be
maintained between the user’s body and the device, including the
antenna. Third-party belt-clips, holsters, and similar accessories used
by this device should not contain any metallic components. Body-worn
accessories that do not meet these requirements may not comply with
RF exposure requirements and should be avoided. Use only the supplied
or an approved antenna.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée
aux deux conditions suivantes :
(1)l'appareil ne doit pas produire de brouillage, et(2)l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
est conforme avec l'exposition aux radiations IC définies pour un
environnement non contrôlé. L'utilisateur final doit respecter les
instructions de fonctionnement spécifiques pour satisfaire la conformité
aux expositions RF. Cet émetteur ne doit pas être co-localisées ou
opérant en conjonction avec une autre antenne ou transmetteur.Ces
exigences définissent
la valeur SAR limite à 1.6 W / kg en moyenne par gramme de tissu.La
valeur SAR la plus
la plus haute valeur de r - s de ce dispositif sur le corps est 1.441w/kg.
Cet appareil a été testé pour des opérations portés sur le corps
typiques. Pour se conformer aux exigences d'exposition aux
radiofréquences, une distance minimale de 0 mm doit être maintenue
entre le corps de l'utilisateur et le dispositif, y compris l'antenne. Les
pinces de ceinture, les étuis et autres accessoires similaires utilisés par
cet appareil ne doivent pas contenir de composants métalliques. Les
accessoires portatifs qui ne répondent pas à ces exigences peuvent ne
pas se conformer aux exigences d'exposition RF et doit être évitée.
Utilisez uniquement l'antenne fournie ou une antenne approuvée
Manufacture
Shanghai Sunmi Technology Co., Ltd. Room 505, KIC Plaza, No.388
Song Hu Road, Yang Pu District, Shanghai, China (200433)
Wireless data POS System
User Guide
(W5920)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.6-c067 79.157747, 2015/03/30-23:40:42
Format                          : application/pdf
Title                           : V1S英文通用用户指南(NFC专用)_20180130
Metadata Date                   : 2018:01:30 14:21:40+08:00
Modify Date                     : 2018:01:30 14:21:40+08:00
Create Date                     : 2018:01:30 14:21:39+08:00
Creator Tool                    : Adobe Illustrator CC 2015 (Macintosh)
Thumbnail Width                 : 256
Thumbnail Height                : 168
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 17273 bytes, use -b option to extract)
Instance ID                     : uuid:c102df75-b978-9848-8e84-ffbddca599a6
Document ID                     : xmp.did:7f073a64-d368-4802-bedb-2fbfa0d5e990
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:14e771fe-ab48-4ee4-9e8b-4bb13601fe18
Derived From Document ID        : xmp.did:14e771fe-ab48-4ee4-9e8b-4bb13601fe18
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved
History Instance ID             : xmp.iid:6be1d812-04ba-4a9c-9d4d-d73e4b069b8f, xmp.iid:7f073a64-d368-4802-bedb-2fbfa0d5e990
History When                    : 2016:07:14 11:48:52+08:00, 2018:01:30 14:21:38+08:00
History Software Agent          : Adobe Illustrator CC 2015 (Macintosh), Adobe Illustrator CC 2015 (Macintosh)
History Changed                 : /, /
Startup Profile                 : Print
Has Visible Overprint           : False
Has Visible Transparency        : False
N Pages                         : 1
Max Page Size W                 : 519.000352
Max Page Size H                 : 195.999065
Max Page Size Unit              : Millimeters
Font Name                       : ArialMT, PingFang-SC-Bold, PingFang-SC-Regular, MSReferenceSansSerif, YouYuan
Font Family                     : Arial, 苹方, 苹方, MSReferenceSansSerif, YouYuan GBpc-EUC-H
Font Face                       : Regular, 粗体, 常规, GBpc-EUC-H
Font Type                       : Open Type, TrueType, TrueType, Unknown, Unknown
Font Version                    : Version 5.01.2x, 10.11d9e1, 10.11d9e1, Version 2.106;PS 2.000;hotconv 1.0.70;makeotf.lib2.5.58329, Version 5.018;PS 5.007;hotconv 1.0.68;makeotf.lib2.5.35818
Font Composite                  : False, False, False, False, False
Font File Name                  : Arial.ttf, PingFang Bold.ttf, PingFang Regular.ttf, MyriadPro-Regular.otf, AdobeHeitiStd-Regular.otf
Plate Names                     : Cyan, Magenta, Yellow, Black, PANTONE 425 C, PANTONE 165 C
Swatch Group Name               : 默认色板组
Swatch Group Type               : 0
Swatch Colorant Swatch Name     : PANTONE 425 C, PANTONE 165 C
Swatch Colorant Type            : SPOT, SPOT
Swatch Colorant Tint            : 100.000000, 100.000000
Swatch Colorant Mode            : Lab, Lab
Swatch Colorant L               : 36.862701, 64.705902
Swatch Colorant A               : -1, 59
Swatch Colorant B               : -2, 68
Producer                        : Adobe PDF library 15.00
Page Count                      : 2
Creator                         : Adobe Illustrator(R) 17.0
For                             : USER,
Bounding Box                    : -505 -648 1332 556
Container Version               : 11
Creator Version                 : 19

EXIF Metadata provided by EXIF.tools