Sunmi Technology W1300 POS System User Manual W1300W1302 04 T1 mini UM 20180110 non NFC v1

Shanghai Sunmi Technology Co.,Ltd. POS System W1300W1302 04 T1 mini UM 20180110 non NFC v1

W1300W1302 04 T1 mini UM 20180110-non NFC-v1

               T1 mini POS User Manual Book    More Information,  Please visit www.sunmi.com H otline:(0086)-400-902-1168              Before using this product, please carefully read this manual and keep it properly.
3  4 Guide for  quick installation Simple Settings   To start  this intelligent  devise for  commercial use, you only need several steps.  1    Press ON button  to light  the screen. First entering  the startup  screen, follow  the prompts. You can choose from  two network  modes on this  device. 2    Wi-Fi  settings · Click “Settings” button  and open WLAN to  enter the WLAN-searching  interface. Wait for  the list of  available WLAN hotspots. · Click corresponding  WLAN. If an encrypted  network  is selected, the device will not  be connected  to the WLAN until  the password is entered. 3    LAN settings       1 Press the open button to open the cover of the printer.   2 Place the thermal paper in the printer. How to download/use APPs Relevant Apps can be downloaded while the network  is connected.  Open the App market, and search and download  the App to  complete  the installation.  To inquire detailed  information  of  the above software:  select  “settings  -> application”,  and select  corresponding software  to  inquire its information; how to uninstall the software:  select “settings  -> application -> application  management -> uninstall” to  uninstall the application;  or press the icon and drag it into  the trash can to uninstall it.              Connect with the power supply.   Press ON button  and the printer  will be turned on in two  seconds. For more help, please refer  to the Help App inside the device
Introduction  to the POS   paper output  exit of  the printer     ON button    button to open the cover of the printer   main screen        cover of  the printer    price-displaying screen         58 thermal printer  version  80 ther mal printer version (W 1300)  (W1302) Paper output  exit of  the printer It is used to print  receipts  when the device is on.  Button  to open the cover of  the printer It is used to open the cover of  the printer  and change the paper.  Main screen It is the touch  screen used by the operator.  ON button W hile the device is  off,  click  the  ON  button to turn on the  machine; While the device is under use, press ON button  for  2 to 3 seconds to turn on or turn off the device. While the device is on, press ON button  for 11 seconds to turn off the device.    Price-displaying  screen It is used for  displaying the price information  of  the customer.
  5V TXD RXD GND Instruction  to  load paper               audio USB serial USB LAN cashbox  power supply output port port port port port port           TF card slot It is used for  external expansion TF memory card. Micro  USB debugging port TF card slot debugging button    Description  of  the paper 58 version supports  the thermal paper with the seize of 57±0.5 m m × Ø 60 m m ; 80  version supports the ther mal paper  with the size  of 79±0.5 m m × Ø 60 m m 。  Regular fault debugging    Description  to QR code scanning by cellphone The version with the function  of QR code scanning supports this function  and can recognize the QR code for  payment by cellphone.  Micro  USB debugging  port,  debugging button They are used to  debug the device.  Problems  Solutions  Cashbox port It is  used to connect the cashbox,  with an electrical  impulse of 120 ms  and no continuous po wer supply being provided. This device only supports  external connection  with  24V/1A  cashbox. If 12V cashbox is used, there  may be risks that  the circuit  of the cashbox will be burnt. What if the printer is dead? What if the printer does not  work? What if the printed paper is blank?  What if the printing is blur? Press the  O N  butto n for  11  second s,  then the  printer is  off.  Click  the ON button  to  turn  the  printer  on. Make sure  the  cover  is closed correctly. Make sure  whether  the  paper  is  jammed. Please check whether the paper roll is put upside down; Please check whether wrong therVmal paper roll is used. Please check whether the thermal printhead  is dirty. If it  is, please clean it  with swab that has been dipped  in anhydrous alcohol. Please use quality thermal paper to  avoid blur printing  due to bad quality of  paper.
Operating  system Android 6.0  sun mi secure  operating syste m Processor Qualcomm Snapdragon with Octa-Core Memorizer 8GB ROM+1GB RAM Screen M ain screen  11.6  inches,  HD resolution 1366  x 768 Touch screen G+G capacitive multi-touch touch  screen Customer  display 128  x 40  Dots   Printer High-speed  58 thermal printer is installed, with a printing speed of 70 m m/s, supporting  the paper roll with a maximum dia meter of 60  m m. High-speed  80 thermal printer is installed,  with an automatic  cutter  and a printing  speed of 160  m m/s, supporting the paper roll with a maximu m dia meter of 60  m m. Wi-Fi 2.4G, support IEEE   802.11   b/g/n Bluetooth Support Bluetooth 2.1/3.0/4.0, support BLE Button ON button (screen-locking button)  + volume increase/decrease  button Loudspeaker 1.2W External memory card Support MicroS D(TF), maxi mu m 64 G  External interface 4 x  USB  TypeA  port, 1 x RJ11 serial  port, 1 x RJ12 cashbox  port, 1 x RJ45 LA N  port  1 x audio output  port,  1 x power  supply port,  1 x Micro-USB debugging port Power adapter Input:AC100 ~240V/1.7A  Output:D C24V/2.5A Size 290 m m  x 290 m m  x 100 m m  Working environment W orking te m perature: -10°C ~55°C Storage  te m perature: -20°C ~ 60°C  General parameters  of the POS Name and content of toxic and harmful substances contained in this product  are shown in the following table   Name of parts   Circuit  board Toxic  and harmful  substances  and elements  (Pb)   (Hg)  (Cd)   (Cr(VII)  (PBB) (PBDE)  Shell  :It indicates  that the content of toxic and  har mful substances  in all ho m o geneo us materials  of this  part is  belo w the limit specified in  SJ/T11363-2006. :It indicates  that the content of toxic and  har mful substances  is  higher than the limit specified  in SJ/T11363-2006 in at least  one homogeneous material  of  this  part;  however, the the reason why the toxic  substance of  that  part  exceeds the limit  is that  there is no applicable  material  to  replace  it  currently.  For products  that  have  reached  or  passed  the  service  years  for  environmental  protection,  they  should  be  recycled according  to  Measures  for  Control  and  Management  of  Electronic  Information  Products  and  should  not  be thrown away at  will.  Technical features  and characteristic the product includes the follo wing features  and characteristics:  WIFI  Operation Frequency ,  Maximum Power                 2412 M Hz~2462 M Hz 802.11b/802.11g/802.11n(H20/H40) 20.49dB m  BT Operation  Frequency 2402 ~2480 M Hz M axi m u m Po w er 9.81dBm   Contents of  Package 1× main machine 1× user  manual (including contents of package,  warranty  card,  qualification  certificate) 1× po w er adapter
Precautions  Warning  Important  Safety Instructions EU Regulatory Conformance Hereby,  Shanghai  Sunmi  Technology  Co.,  Ltd.  declares  that  the  radio  equipment  type  is in  compliance  with    Directive 2014/53/EU. · Please insert the AC plug into the AC outlet according to the identifying  input  on the power adapter; · It is prohibited  to use the device in any places with potential  explosive gases; · Nonprofessionals  shall not  open the power adapter anyhow so as to avoid dangers; · The device is a Grade A product.  In living environment, the product  may cause radio interference. Therefore, users may be required to  take practical  measures against  the interference. · About the battery  replacement: 1. It may cause explosion with  wrong type battery 2. Old battery  which is replaced should be handled by repair  man, do not put it in fire! · Adapter shall be installed near the equipment  and shall be easily accessible. · The operating  temperature  of  the device between -10℃ to 55℃. · The  device co m plies  with RF  specifications when the device  used at 20c m for m  your body. · This product  can be used across EU member states.  Recommendation  · Do not  use the  device near water  or in humid environment.Keep  liquid  from  falling  onto  the terminal; · Do not use the device in extremely cold and hot environ m ent, e.g.  around fire or lighted cigarettes; · Do not smash, throw  or bend the device; · Use the device in clean and dustfree  environment as much as possible and keep small items from falling  into  the terminal; · Do not use it near medical devices unless permitted. · Avoid installing  or using during thunder and lightning,other wise lightning  stroke  may occur; · Cut off the po w er im m e diately if there is abnor mal s mell,  overheating or s mog; · Do not touch the sharp  paper cutting tool!   Statement  The company is not  responsible for  the following  behaviors: · Damages caused by using and maintaining the device without  following  the User Guide; · Damages or problems caused by selection  of  objects or Consumables (products  which are not the initial  ones provided or recognized  by the company). In this case, the company will not undertake  any responsibility.  No one is entitled  to  modify  or change the product  unless permitted  by the company.  Disclaimer Discrepancies between  the  product and  the  file  concerning details may raise due to product  updates. Please be subject to the   material   object.   The   company   reserves   the   right   to interpret  the  file  and the right to revise  this   manual  without prior  notices. Please make sure the temperature  for  adapter  will be from -10 ℃ to 55  ℃. Please make sure the temperature  for  device will be from -10 ℃ to 55  ℃. The full text  of  the EU declaration  of  conformity  is available at the following  internet  address: www.sunmi.com  Notice: The  device co m plies  with RF  specifications when the device used at least  20c m fro m  hu m a n body.  FCC Regulations: This device complies  with  part  15 of  the FCC Rules. Operation is subject  to  the following  two  conditions: (1) This device may not cause harmful  interference,  and (2) this device must accept  any interference  received, including interference  that  may cause undesired operation. This device has been tested  and found to comply with the limits  for  a Class B digital  device, pursuant  to Part  15 of  the FCC Rules. These  limits  are designed  to  provide  reasonable  protection  against  harmful  interference  in  a  residential  installation. This equipment  generates,  uses and  can  radiated  radio  frequency  energy  and, if  not  installed  and used in  accordance with the instructions,  may cause  harmful  interference  to  radio  communications.  However, there  is no guarantee  that interference will not  occur  in a particular  installation  If this  equipment  does cause harmful  interference  to  radio  or television  reception, w hich can  be  deter mined by turning the equip m e nt off and  on, the user  is  encouraged to try to correct  theinterference  by one or more of  the following  measures: · Reorient or relocate the receiving antenna. · Increase the separation  between the equipment and receiver. · Connect the equip m e nt into an outlet on a circuit  different fro m that to  which the receiver  is connected. · Consult the dealer or an experienced radio/TV  technician  for  help.  Caution:  Changes  or  m o difications  not expressly  approved by the party responsible for co m pliance could void the user's authority to operate the equipment.This equipment must be installed and operated in accordance  with provid- ed instructions  and the antenna(s)  used for this trans mitter  must be installed to provide a separation  distance  of at least  20 cm from all persons and must not be co-located or operating in conjunction  with any other antenna or transmitter. End-users and installers  must  be  provide  with  antenna installation  instructions  and transmitter  operating  conditions  for  satisfying  RF exposure compliance. Notice  for  Canada This device complies  with  Industry Canada’s licence-exempt RSSs. Operation  is subject  to the following  two  conditions: (1)This device may not cause interference;  and (2)This device must accept  any interference,  including interference  that may cause undesired operation  of  the device. Le  présent  appareil  est  conforme   aux  CNR  d'Industrie  Canada  applicables   aux  appareils  radio  exempts  de  licence. L'exploitation  est autorisée aux deux conditions  suivantes : (1)l'appareil  ne doit  pas produire  de brouillage,  et  (2)l'utilisateur  de l'appareil  doit  accepter  tout  brouillage  radioélectrique subi, même si le brouillage  est susceptible  d'en compromettre  le fonctionnement.

Navigation menu