Sunpark Electronics 44000104 Electronic Ballast User Manual 44000104

Sunpark Electronics Corp Electronic Ballast 44000104

users manual

44000104 User Manual 44000104 is an electronic ballast to be used with 20” UV lamp. - Input voltage – 120V 60Hz - Input power – 27W - Safety – UL and cUL approved per UL 935 and UL 1995, File E233711 - Suitable lamps- 1 pc 20” UV HO lamp This equipment has been tested and found to comply with the limits for a Consumer device, pursuant to Part 18 of the FCC Rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment generates, uses, and can radiate frequency energy, and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If interference problems do occur, please do as following suggestions: (1) Turn off this equipment only. If the interference is still there, please check other system; If the interference disappears, go to step 2; (2) Make sure this equipment is grounded and the outlet has ground (green) wire; (3) If the television or radio is interfered, please relocate the equipment away from the television or radio; (4) If other equipments share the same outlet with this equipment and get interfered, please place the AC power connection of this equipment on a different outlet; (5) If the interference is still there, this equipment may be defective. Please contact the manufacturer for replacement. Change or modifications to this product without the express approval of Sunpark Electronics could result in non-FCC compliance, and void the user's authority to operate this equipment.

Navigation menu