Sunrex Technology 0304 Multi Laser Presenter User Manual ML0304

Sunrex Technology Corp Multi Laser Presenter ML0304

User Manual

ML0304 User Manual HOW TO USE THE LASER PRESENTER 1. Insert the receiver into the USB port of PC. 2. Your PC operation system will start to install the device automatically .And you can see the information as below display in your computer. 3. In Win98/Me operation system you need to follow the instructions on your screen .During the install process, the O/S may ask you to put Win98 CD into the CD-ROM. 4. After the installation process is done,the presenter will start working . Better than other competition: 1. NO direction and NO level speed precise control. 2. RF (315 or 433 or 900MHZ), Any angle ,reachable distance up to 7 Meters. 3. 256 ID sets and RF-technique to Anti-interference . 4. No matter what PC Off or Battery Out ,The ID will not be loss. 5. Add Page-Up Page-Down Key . Notice : For trouble shooting If the presenter is not working : 1. Maybe the battery power is too low , please check your battery . 2. Maybe ID code was not matched ,please link ID. (1).push the button on receiver side then press “left button” + “right button” within 10 SEC after the receiver ID button was pressed on the transmitter side. Laser Pointer (1).VR-mouse (2).mouse middle keyMouse right key Page upMouse left key Page down Laser key
CAUTION LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. CLASS II LASER PRODUCT. NEVER POINT A LASER BEAM INTO A PERSON’S EYES OR VIEW A LASER BEAM DIRECTLY, AS PROLONGED EXPOSURE CAN BE HAZARDOUS TO THE EYES. MOMENTARY EXPOSURE FROM A LASER POINTER, SUCH AS AN INADVERTENT SWEEP OF THE LIGHT ACROSS A PERSON'S EYES, MAY CAUSE TEMPORARY FLASH BLINDNESS SIMILAR TO THE EFFECT OF A CAMERA FLASH BULB. ALTHOUGH THIS CONDITION IS TEMPORARY, IT CAN BECOME MORE DANGEROUS IF THE EXPOSED PERSON IS ENGAGED IN A VISION-CRITICAL ACTIVITY SUCH AS DRIVING. Specifications Electrical/Presenter Interface USB Buttons Mouse (3), Laser (1), Function (1) Channel Number One ID Number 256 Battery life Up to 60 days Input power Two AAA batteries (3 Volt, DC) Transmission Radio Frequency Modulation frequency 433 MHz (Europe/Australia) 900 MHz (North America) Effective distance Up to 23.1 feet (7 m) Power consumption Mouse – 10 mA, Laser – 18 mA Standby Mode 0.6 mA (60 mins) Sleep Mode 10 uA Compatibility Fully Compatible with PC/AT Compatibility software Windows® 98/Me/2000/XP operating system Laser wavelength at peak emission 645-665 nm Laser Spot size at 16.5 feet (5 m) Laser Cw output power 3.5 mW (maximum) Weight (without battery) 2.1 ounces (60 g) Dimensions (L x W x H) 5.1 inch x 1.9 inch x 1.3 inch (130 x 47 x 32 mm) Receiver Interface USB Power DC 5V, 500mA Max Button ID Setting Weight 0.42 ounces (12 g) Dimension (L x W x H) 3.15 inch x 0.86 inch x 0.47 inch (80 x 22 x 12 mm)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.

Navigation menu