Sunwin Technology SW-196F Turntable Player User Manual GPO Ambassador Manual High Res

Shenzhen Sunwin Technology Co., Ltd. Turntable Player GPO Ambassador Manual High Res

User Manual

TURNTABLEUSER GUIDECMYCMMYCYCMYK
CMYCMMYCYCMYK
ContentIntroduction ............................................................................... 1Unpacking ................................................................................. 1Features..................................................................................... 2Location of Controls.................................................................. 3Mode Selection ......................................................................... 4Unit Operation ........................................................................... 4Replacing the Stylus.................................................................. 8Tips for Better Performance ...................................................... 9Product Care ........................................................................... 10Product Support...................................................................... 11CMYCMMYCYCMYK
IntroductionThanks for purchasing the turntable player from GPO. This retro-themed unit adds a touch of classic style to any room, while still providing amazing audio quality through the built in speakers. To get the most from your new turntable player, please read these instructions carefully before use, and keep them in a safe place for future reference.1This package contains:1x SW-196F Ambassador1x Turntable Needle (fitted)1x Turntable Slip Mat (placed on the turntable)1x Blank USB Stick1x DC Power Cable1x Aux-in Cable1x ManualCarefully remove all of the contents from the packaging. Make sure you retain and store this manual for future reference.When choosing a location for the unit, avoid inclines, direct sunlight or sources of heat and moisture. UnpackingCMYCMMYCYCMYK
Features2Your turntable unit has the following features:1. 3-speed turntable (33, 45 or 78 RPM)2. Belt drive and semi-automatic play tone arm3. Ceramic stereo cartridge and jewel stylus4. Built-in 45 RPM adapter5. Aux-in and Aux-out functions6. Built-in stereo speakers7. Rechargeable battery8. Bluetooth functionalityKeep all of the ventilation holes clear, and do not place any equipment on top of the unit as this can lead to damage.Only remove the stylus guard from the stylus assembly during use. Leaving the guard in place during storage will protect your stylus from damage.CMYCMMYCYCMYK
123456711131415169812101. Turntable Indicator Light2. Aux-in Indicator Light3. USB Indicator Light4. Bluetooth Indicator Light5. Battery Power Indicator Light6. Recording Indicator Light7. Power On/Off and Volume8. Mode Select9. Stop10. Record11. Fast Forward12. Rewind13. Play/Pause14. Aux-in Jack15. Aux-out Jack16. DC Power JackLocation of Controls3CMYCMMYCYCMYK
4Mode SelectionUnit OperationTo select the Turntable, USB, Aux-in or Bluetooth mode, press the mode select button until the relevant indicator light is illuminated.Press to STOP music playing in USB mode.Press to STOP vinyl recording in Record mode.PLAY or PAUSE the music under USB mode.Press to record your vinyl records, more information in record section.Press to the NEXT song under USB mode.Press to the PREVIOUS song under USB mode.MTurntable Mode play a vinyl record through the unit’s built-in speakersUSB Mode play MP3 files stored on an external USB driveUSB Record Moderecord your vinyl to MP3 files on an external USB driveAux-in Modeplay music from your music player, smartphone or other device through the unit’s built in speakersBluetooth Modeconnect the unit to external Bluetooth-enabled speakersBattery Level IndicatorDisplays the current charge status of the rechargeable battery Your turntable player has a number of modes of operation. Each one will allow you to play music from a different source using the unit’s two in-built full range stereo speakersCMYCMMYCYCMYK
Turntable Mode1. Turn on the unit power2. Select Turntable mode using the mode select button3. Choose the correct speed setting, using the 45RPM adapter if needed, and place the vinyl record onto the turntable4. Place the tone arm into the correct position to begin playback5. The turntable will stop automatically when the record has finished, and the tone arm will return to the original position6. Use the volume controls to set the desired sound levelsAUX-IN Play Mode1. Turn on the unit power2. Select Aux-in mode using the mode select button3. Connect your chosen device to the unit’s aux-in jack using the cable provided4. Press the play/pause button to begin playback5. Use the volume controls to set the desired sound levelsUSB Mode1. Turn on the unit power2. Select USB mode using the mode select button3. Connect your USB device to the unit using the USB slot4. Press the play/pause button to begin playback5. Use the volume controls to set the desired sound levels6. To record from vinyl to your device, select USB record mode7. Press record to begin recording 8. Press stop to cancel recording5CMYCMMYCYCMYK
Bluetooth ModeThe Bluetooth mode allows you to stream your vinyl to any Bluetooth enabled speaker or headphones.1. Turn on the unit power2. Select Bluetooth mode by holding the mode button down for three seconds while in turntable, USB or Aux-in mode3. The Bluetooth indicator light will flash rapidly as the unit searches for nearby Bluetooth-enabled devices.4. When paired the blue light will flash shortly with a three second interval5. If the devices fail to sync, please repeat points 1-4.6. Use the volume controls to set the desired sound levels7. Hold down the stop button for three seconds to turn off Bluetooth mode and move straight to turntable modePlease note: When pairing the Ambassador to your Bluetooth speaker or headphones, please ensure that the device you wish to stream vinyl to is set to pairing mode. This will allow them to sync.1. Press the mode button until the red LED light next toTurntbale is illuminated.2. Insert a blank USB stick into the slot3. Place the desired vinyl onto the turntabled and begin playing.4. Press the record button on the control panel, the red light next to record will begin to flash. Press the record button once to record the vinyl in one track, press the record button twice to split the tracks.Vinyl Record Mode6CMYCMMYCYCMYK
7An RCA cable is included with you GPO Ambassador, you will require this cable to connect to extra speakers.RCA Audio OutThe battery level indicator displays the current charge status of the unit’s rechargeable battery.While operating on mains power via the DC cable and jack, the unit will automatically begin to charge the inbuilt battery. The battery indicator light will indicate how the charging is progressing:Red: The unit needs to be chargedGreen: The unit is chargingBlue: The unit has fully chargedLine OutTo use your Ambassador turntable with external speakers, connect your speakers to the unit’s Aux-out jack.Headphones OutHeadphones can be connected using the Aux-out jack.Charging the BatteryCMYCMMYCYCMYK
8RCA Audio OutReplace Stylus diOOOOOOOOttttttRRRRCCCCCAAA AAAAuuuuuddddddddddddiiiiiiiiiiiiiiioooooooooooooooooooo OOOOOOOOOuuuuuttttttttttttttttttttttttThe unit’s stylus will need replacing regularly. To replace the stylus:1. Push the arm lock to release the tone arm2. Remove the cap from the cartridge to expose the needle3. Carefully remove the cartridge from the socket4. Completely remove the stylus needle from the cartridge5. Carefully place a new stylus needle into the cartridge6. Place the cartridge back into the socket7. Put the cartridge cap back in place8. Re-engage the arm lockThe turntable's stylus needs to be replaced every 3-4 months for best performance. To buy a replacement stylus, go to www.gporetro.com or visit one of our stockists.CMYCMMYCYCMYK
To get the best possible performance from your turntable, please ensure that you: the centre or both edges. bumping it onto the turntable mat or the edge of a record. back-to-front motion. turntable system. secured before moving.Tips for Better Performance9CMYCMMYCYCMYK
Your SW-196F record player will provide you with years of listening pleasure, as long as it is properly cared for. To ensure that the unit remains in working condition, please take care to: sources of splashing or dripping, such as vases. and bathrooms, and those with extreme temperatures of 35°C or higher. unplug the unit and call our support team for advice.  and finish, and use only a dry dust cloth. The front panel canbe cleaned gently with a damp cloth and mild soap. playback may be affected. warmer location, please wait 30 minutes before operation. 10Product CareCMYCMMYCYCMYK
11CMYCMMYCYCMYKProduct SupportFor more advice or assistance, please visit www.gporetro.com, or call our support team on 0845 521 4095.Please note, for your personal safety you SHOULD NOT attempt to open the unit’s casing. Opening the casing voids your warranty, and no user serviceable parts are contained inside
12CMYCMMYCYCMYKThis device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
www.gporetro.comCMYCMMYCYCMYK

Navigation menu