Suprema FSM Face-Station User Manual

Suprema Inc. Face-Station

User Manual

www.suprema.co.krFace-StationInnovative Fingerprint TerminalInstallation Guide(ver0.1)
Product ContentsnBasic ContentsProduct ContentsWallmounting screwsand holders-4 eaScrew for fixing main body2ⒸCopyright 2010Suprema Inc.Terminal Wall mounting metal bracketCablesSoftware CDFerrite Core
Product ContentsnOptional accessoriesUSB fingerprint scanner f3ⒸCopyright 2010Suprema Inc.USB fingerprint scanner for enrollmenton PCWireless LAN Access Point
Cable and Connector PinoutRelayPIN PIN DESCRIPTION1NORMAL OPEN2 COMMON3NORMAL CLOSE4ⒸCopyright 2010Suprema Inc.RS485PIN PIN DESCRIPTION1TRX -2TRX +3GND4 SHIELD GNDBefore Start
Cable and Connector PinoutSwitch InputPIN PIN DESCRIPTION1SWIN_IN02 SWIN_IN13GND4 SHIELD_GND5 SWIN_IN26 SWIN_IN37GND8 SHIELD_GNDPIN PIN DESCRIPTION1VDP_S2GND5ⒸCopyright 2010Suprema Inc.VDPWiegandBefore StartPIN PIN DESCRIPTION1WIEGAND_D02WIEGAND_D13GND4 SHIELD GND2GND3 VDP_VCC4 VDP_V5VDP_OPEN6GND7 SHIELD_GND
Installation ExamplePC Network HUB8P CableEthernet6ⒸCopyright 2010Suprema Inc.Exit ButtonDoor Lock3P CableUSBUSB Firmware Upgrade Only
Product Dimension1327ⒸCopyright 2010Suprema Inc.Front165(unit : mm)
Ferrite Core 사용법8ⒸCopyright 2010Suprema Inc.
전원연결nPower Connection9ⒸCopyright 2010Suprema Inc.nRecommendedl12V ±10%, at least 1500mA for BioStation T2 alone installation.lComply with standard IEC/EN 60950-1
LAN Connection10ⒸCopyright 2010Suprema Inc.
RS485 Network Connection11ⒸCopyright 2010Suprema Inc.Before Start
Relay Connection –Fail Safe Lock12ⒸCopyright 2010Suprema Inc.
Relay Connection –Fail Secure Lock13ⒸCopyright 2010Suprema Inc.
Relay Connection -Automatic Door14ⒸCopyright 2010Suprema Inc.
TTL Input Port Connection –RTE SwitchesDStationCable shield(optional)(8) SHELDGNDRequest To Exit #115ⒸCopyright 2010Suprema Inc.(1) TTL IN0(2) TTL IN1(5) TTL IN2(6) TTL_IN3(3) GND(2) SHELD_GND(7) GND(8) SHELD_GNDRequest To Exit #1Request To Exit #1Request To Exit #1
Wiegand Input Connection –External reader16ⒸCopyright 2010Suprema Inc.
System Specificationsn●CPU :Main B/D CPU -ARM11 667MHz X 1ean-DSP 1GHz X 1eann●Memory : Main B/D -Flash : Nand SLC 512MByte, SDRAM(mDDR) : 256MBytenn●DISPLAY : 4.3inch LCD X 1ea n●INPUT : 저항막방식 Touch Screen X 1ea + 5 Keypad (F1~F4, CALL)n●CAMERA : VGA CMOS Camera X 2ean●I/O Port : Wiegand In/Out (S/W 설정을통해 Input 또는 Output으로사용가능) X 1chnSwitch Input X 4chnRS-485 X 2chnRS-232(Share with RS-485) X 1ch17ⒸCopyright 2010Suprema Inc.nRS-232(Share with RS-485) X 1chnRelay(1A@30Vdc) X 2chnEthernet(10/100M) X 1ch n●Sound Out: System Sound용Speaker X 2ea n●RF CARD : Mifare n●Power Input : 12Vdc Adaptor or POE Input기타
FCC RulesChanges or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.CautionWarning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation.Information to User This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 18ⒸCopyright 2010Suprema Inc.digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures:1. Reorient / Relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help
Electrical SpecificationMin. Typ. Max. NotesPowerVoltage (V) 10.8 12 13.2Current (mA) -700TTL/Wiegand InputVIH (V) 2 - -VIL (V) - - 0.8Pull-up resistance (Ω)-10k -19ⒸCopyright 2010Suprema Inc.TTL/Wiegand OutputVOH (V) 4 - - @ IOH = -5mAVOL (V) - - 1 @ IOL = 5mAOutput resistance (Ω)-100 -RelaySwitching capacity (A) - - 10.330V DC125V ACSwitching power (resistive) - - 30W37.5VADCACSwitching voltage (V) - - 110125DCAC
Suprema Inc.16F Parkview Office Tower, Jeongja-dong, Bundang-gu, Seongnam, Gyeonggi, 463-863 KoreaE-mail : support@supremainc.comWebsite : www.supremainc.comFunctions and specifications of the product are subject to changes without notice due to quality enhancement or function update. For any inquiry on the product, please contact Suprema Inc.

Navigation menu