Suprema XR-10 Xpass Slim Dummy User Manual xr 10 eng
Suprema Inc. Xpass Slim Dummy xr 10 eng
Suprema >
Users Manual
Contents Safety Precautions Product Components Optional Accessories Product Description Product Dimension Cables and Connectors 10 Power Connection 11 RS485 Connection Digital Input Connection Wiegand Input/Output 12 Wall-mount Bracket Installation 17 Extended Bracket Installation 18 Specification 19 Electrical Specification 20 FCC Rules 21 14 16 -2- Safety Precautions Do not install the device in a place subject to direct sun light, humidity, dust or soot. Do not place the device next to heating equipments. Do not place a magnet near the product. When cleaning, do not splash water on the device; wipe it clean with smooth cloth or towel. It may cause a damage or a failure to the product. Be careful not to let liquid like water, drinks or chemicals leak inside the device. Clean the device often to remove dust on it. It may cause a failure. The list above is to keep user’s safety and prevent any loss. Please read safety precautions carefully before use. -3- Safety Precautions Do not drop the device. Do not disassemble, repair or alter the device. The warranty does not apply to any product damage cause by an arbitrary installation or repair. Do not let children touch the device without supervision. Do not use the device for any other purpose than specified. Do not damage the device. Contact your nearest dealer in case of a trouble or problem. The list above is to keep user’s safety and prevent any loss. Please read safety precautions carefully before use. -4- Product Description -7- LED Status -8- Product Dimensions (unit : mm) < Front View > < Side View > < Bracket > -9- < Extended bracket > Cables and Connectors -10- Pin Pin Name Description Color SWIN 0 Switch Input 0 Purple SWIN 1 Switch Input 1 Brown SW GND Switch GND Gray WGD D0 Wiegand Data 0 Green WGD D1 Wiegand Data 1 white 10 WGD GND Wiegand GND Black 11 485 TRX+ 485 TRX+ Blue(white string) 12 485 TRX- 485 TRX- Yellow(black string) 13 485 GND 485 GND White(black string) 14 PWR IN Power IN Red 15 PWR GND Power GND Black (white string) Power Connection Pin Pin Name Color 14 PWR IN Red 15 PWR GND Black (white string) Recommended Power Supply: 12V ± 10%, at least 500mA. Comply with standard IEC/EN 60950-1. When sharing the power with other devices, use a power supply with a higher current ratings. -11- RS485 Connection for Host Communication Pin Pin Name Color 11 485 TRX+ Blue (white string) 12 485 TRX- Yellow (black string) 13 485 GND White (black string) -12- RS485 Connection for Secure I/O Pin Pin Name Color 11 485 TRX+ Blue (white string) 12 485 TRX- Yellow (black string) 13 485 GND White (black string) Max Number of Devices: Maximum eight(8) devices (including master) within an RS485 loop. -13- Digital Input Connection (Alarm, Emergency S/W) Pin Pin Name Color SWIN 0 Purple SWIN 1 Brown SW GND Gray -14- Digital Input Connection (RTE, Door sensor) Pin Pin Name Color SWIN 0 Purple SWIN 1 Brown SW GND Gray -15- Wiegand Input/Output Wiegand Input Pin Pin Name Color WGD D0 Green WGD D1 White 10 WGD GND Black Wiegand Output Pin Pin Name Color WGD D0 Green WGD D1 White 10 WGD GND Black -16- Wall-mount Bracket Installation Fix the wall mount bracket on a wall using the wall mounting screws Hook Xpass Slim on the wall mount bracket Fix Xpass Slim and wall mounting bracket using the mounting screw -17- Extended Bracket Installation Assemble the extended bracket using the provided screws Mount the extended bracket to the desired location using the wall mounting screws Fix Xpass Slim and the extended bracket using the mounting screw Hook Xpass Slim on the extended bracket -18- Specification CPU 32 bit Micro-processor Memory 1MB FLASH + 16MB SDRAM RF Card 13.56 MHz ISO14443A/B, ISO15693, Mifare/DesFire(CSN), Inside(CSN), Felica(IDM) User Capacity 40,000 user Log Capacity 50,000 log Interfaces RS485, Wiegand In or Out IP Rate IP65 class Sound Multi-tone Buzzer LED Multi-color LED RTC Lithium-ion Rechargeable Batteries I/O Power Operating Temperature Size Certificates Tamper x 1 Switch Input x 2 Wiegand x 1 12VDC -20 ~ 50°C 80 x 120 x 11.4mm (W x H x D ) CE, FCC, KCC, RoHS, IP65 Caution for RTC Battery Improper replacement of the battery may result in an explosion. Please use the specified battery according to proper instructions. -19- Electrical Specification Min. Typ. Max. Notes 10.8 12 13.2 Use regulated DC power adaptor only Power Voltage (V) Current (mA) 500 Switch Input VIH (V) TBD VIL (V) TBD Pull-up resistance (Ω) 4.7k VOH (V) VOL (V) 0.8 Pull-up resistance (Ω) 10k The input ports are pulled up with 4.7k resistors TTL/Wiegand Output The outputs ports are open drain type, pulled up with 10k resistors internally Relay Switching capacity (A) 0.3 30V DC 125V AC Switching power (resistive) 30W 37.5VA DC AC Switching voltage (V) 110 125 DC AC -20- FCC Rules Caution Warning Information to User Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interface, and (2) this device must accept any interface received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limit of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, user and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more the following measures: 1. Reorient / Relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit difference from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help -21-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : hslee Create Date : 2012:09:27 12:06:32+09:00 Modify Date : 2012:11:29 11:41:52+09:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Format : application/pdf Creator : hslee Title : xr-10 eng.ppt [호환 모드] Creator Tool : pdfFactory Pro www.pdffactory.com Metadata Date : 2012:11:29 11:41:52+09:00 Producer : pdfFactory Pro 3.52 (Windows XP Professional Korean) Document ID : uuid:75e89e26-8727-4496-a81b-cb43b1fb3e28 Instance ID : uuid:26db36ad-cf90-46df-9d43-7d9283110cd9 Page Count : 22EXIF Metadata provided by EXIF.tools