Sure Wave CQZ194-B Aluminum Bluetooth Speaker User Manual

Sure Wave (HongKong) Limited Aluminum Bluetooth Speaker

User manual

CQZ194-B Bluetooth Speaker Instruction Manual (Read before proceeding) Power  Powered by internal recharg eable Li thium ion b attery. When there is no enough power, the item will turn off automatically.  Charging process:  Take off the top plastic cover  Using a DC 5V adaptor(not included) or USB cable (included), insert the jack into the 3.5mm DC hole located on top of the unit for charging while no power.  A red light in front will indicate the charging situation. When battery power is full, the red light will off automatically. Bluetooth Speaker Operation  Turn on the unit by pushing the ON/OFF switch at the bottom to ON position, direction light in Green indicates the power situation.  A Blue light will start blinking to indicate the speaker is in paring mode and searching for your Bluetooth mobile device.  Bluetooth speaker device name is “SB-01”. The Blue light will begin to flashing four times every 3 seconds after pairing successfully. (pairing code is 0000 if requested.)  Start playing music on your device. Keep your device within 33feet (10m) of your speaker.  Adjust the volume of your device to a comfortable level.  Turn off the unit when not in used. Universal Speaker Operation  For other music devices without Bluetooth, use the attached audio input cable. Insert the 3.5mm jacks into the “LINE-IN” hole and the earphone hole on your device.  Turn on the unit and start playing music. Caution:  This is not a toy. Please keep away from small children.  Please keep away from water / heat.  Low power may cause poor connection even no working of Bluetooth. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement:.This equipment complies with FCC radiation exposure requirement.The device canbe used in portable exposure condition without RF striction.

Navigation menu