Suzhou Sate Auto Electronic TSB25 TPMS Transmitter User Manual TSB23 25 Sersor

Download:
Mirror Download [FCC.gov]
Document ID	1944418
Application ID	03DmbFXFVow6ifw0/n2T/g==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	22.29kB (278589 bits)
Date Submitted	2013-04-18 00:00:00
Date Available	2013-04-18 00:00:00
Creation Date	2013-04-11 14:26:55
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2013-04-18 13:57:46
Document Title	Microsoft Word - TSB23-25 Sersor User Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

TSB25 Sensor User Manual V1.0
TSB25 Sensor User Manual
1 General Description
1.1 Purpose
Ｉｔ ｉｓ ａ Ｖａｌｖｅ Ｓｔｅｍ Ｄｅｖｉｃｅ ｔｈａｔ ｗｏｒｋｓ ｏｎ ａｉｒ ｐｒｅｓｓｕｒｅ．Ｔｈｉｓ ｍａｎｕａｌ ｉｓ ｔｏ ｍａｋｅ
ｓｕｒｅ ｔｈｅ ｒｅｌｉａｂｉｌｉｔｙ ｏｆ ｃｏｍｍｕｎｉｃａｔｉｏｎ ｂｅｔｗｅｅｎ ｒｅｃｅｉｖｅｒ ａｎｄ ｓｅｎｓｏｒ， ａｎｄ ｔｉｇｈｔｎｅｓｓ
ｂｅｔｗｅｅｎ ｓｅｎｓｏｒ ａｎｄ ｗｈｅｅｌ ｈｕｂ．
2 Basic Requirements
2.1 Tire valve
2.1.1 Suitable pore size for tire valve
The valve is suitable for wheel hub with tire valve pore size of Φ11.5±
0.2mm.
2.1.2 Valve nut dimension
Valve nut O.D. is Φ14mm, length is 19mm。
2.2 Housing
Housing of the sensor must be sealed to meet water proof and dust proof
requirement, with protection degree IP54. The housing material should make the parts
meet vibration, shock and drop requirement, and tests for vibration, shock and drop
should comply with test requirements of IS016750-3 2007 《 Road Vehicles ─
Environmental conditions and testing for electrical and electronic equipment》.
Housing material: PA6+GF30 (black)
2.3 Dimension requirement
TSB25 dimension is as below:
1 of 5
TSB25 Sensor User Manual V1.0
Item
Size
Length
76mm
Width
63mm
Height
26mm
Remark
Including tire valve
2.4 Installation requirement
4N.m(±0.5 N）torque force should be employed to screw tire valve nut when install
TSB25 sensor to make sure the installation reliability. After installation, there
should be 0-3mm space between sensor camber side and wheel hub camber side, as below:
Installation environment requirement:
Sensor dropped from height above 1m can’t be applied on vehicle any more;
There shouldn’t be static electricity above 6KV in sensor installation site;
Installation steps:
① Screw the sensor valve nut off, and get the valve through wheel hub valve pore.
2 of 5
TSB25 Sensor User Manual V1.0
② Screw the sensor nut by hand, and employ 12mm sleeve to tighten it（torque force
4N.M）.
③ Mount the rubber tubes;
④ Inflate the tires to standard pressure, and check whether there is leakage
between the valve and lock nut with soap water;
⑤ Screw the valve cap on to finish sensor installation;
⑥ Check the tire’s dynamic balance after sensor installation, and then install
the other three sensors one by one, and mount the tire.
Note: After sensor installation, the tires need to be re-balanced.
3 of 5
TSB25 Sensor User Manual V1.0
Note: During installation, the sensor need to be clean, not polluted by lubricant
oil, etc;
During tire mounting and dismounting, the sensor shouldn't be touched;
During tire inflation and deflation, no force should be employed to the sensor;
2.5 Temperature requirement
Operation temperature and storage temperature range of TSB25 sensor are as
below:
Parameter
Temperature range
Unit
Minimum
Maximum
Operation temperature
-40
125
℃
Storage temperature
-40
85
℃
2.6 Sealing requirement
Sealing test of TSB25 sensor after installation complies with standards of
GBT12836.2（Tubeless valves--Part 2: Clamp-in valves）-7.2.2.
4 of 5
TSB25 Sensor User Manual V1.0
FCC WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
NOTE 1: Any changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
5 of 5

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : 3.1-702
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2013:04:18 13:57:46+08:00
Create Date                     : 2013:04:11 14:26:55+08:00
Metadata Date                   : 2013:04:18 13:57:46+08:00
Format                          : application/pdf
Title                           : Microsoft Word - TSB23-25 Sersor User Manual.doc
Creator                         : Administrator
Document ID                     : uuid:b131812a-6a7f-45b8-bf65-949f04ddc63a
Instance ID                     : uuid:ae7a936a-343e-4d4e-b6d8-e6bad85d3e97
Page Count                      : 5
Author                          : Administrator

EXIF Metadata provided by EXIF.tools