Suzhou Sate Auto Electronic TSB46 Tire Pressure Monitoring System Sensor User Manual

Suzhou Sate Auto Electronic Co., Ltd Tire Pressure Monitoring System Sensor

User manual

Download: Suzhou Sate Auto Electronic TSB46 Tire Pressure Monitoring System Sensor User Manual
Mirror Download [FCC.gov]Suzhou Sate Auto Electronic TSB46 Tire Pressure Monitoring System Sensor User Manual
Document ID3438464
Application IDXCccKqLNC+uKPKuxKTjD+Q==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize46.38kB (579772 bits)
Date Submitted2017-06-24 00:00:00
Date Available2017-06-24 00:00:00
Creation Date0000-00-00 00:00:00
Producing SoftwareFoxit PhantomPDF Printer Version 6.1.0.0923
Document Lastmod0000-00-00 00:00:00
Document TitleUser manual



Model: TSB46
User manual
FCC ID: TTETSB46
IC: 6707A-TSB46
1. General Description
Tire pressure sensor is composed of RF chip, battery, antenna and Rf
matching network. It is applied to monitor tire pressure, temperature and
acceleration and the tire data is transmitted via center frequency 433.92MHz.
2. Operation Functions
Transmitter ID Programming:transmitter ID can be progranmmed for easy
replacement
Alarm Record Inquity:automatically record the 10 alarm records
Standard Pressure Programming: standard pressure for each tire can be
programmed on monitor
3. Product Features
Powerful functions including low pressure alarms in 3 levels,fast leak alarm
and standard pressure setting etc.
Monitor connects to continuous power to ensure full-time monitoring
Design of the whole system matches the rtuck perfectly
Simple operation for function programming and inquiry
4. Installing structure
1. Valve rod
2. cushion
3. nut
4. valve cap
TPMS Sensor
5. Installation requirements
User manual


Model: TSB46
FCC ID: TTETSB46
IC: 6707A-TSB46
moment:3.8N.m(±0.3N)
Tires must do dynamic balance testing and adjusting.
Federal Communications Commission (FCC) Interference Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generate, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate this
equipment.
RF exposure warning
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This equipment must not be collocated or operating in conjunction with
any other antenna or transmitter.
Industry Canada (IC)
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Cet appareil est conforme à la norme RSS d'Industrie Canada. Son fonctionnementestsujet aux deux
conditions suivantes:
(1) ledispositif ne doit pas produire de brouillagepréjudiciable, et
(2) cedispositifdoit accepter tout brouillagereçu, y compris un brouillage susceptible de provoquer un
fonctionnementindésirable.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 4
Producer                        : Foxit PhantomPDF Printer Version 6.1.0.0923
Author                          : 
Creator                         : 
Subject                         : 
Title                           : 
EXIF Metadata provided by EXIF.tools
FCC ID Filing: TTETSB46

Navigation menu