Suzhou Switek Electronics and Technology KL-151 KVM Extender User Manual 316 304 265 265 2

Suzhou Switek Electronics & Technology Co., Ltd. KVM Extender 316 304 265 265 2

Users Manual

KL-151/KL-153 User ManualPACKING LISTThe complete KL-151/KL-153 switch package consists ofKL-151/KL-153 switchPower AdapterUser ManualPlease check to make sure that all the components are present and that nothing was damaged in shipping. If youencounter a problem, contact your dealer.Read this manual thoroughly and follow the installation and operation procedure carefully to prevent anydamage to the unit, and/or any of the devices that connect to it.FEATURESCan simultaneously control two 8-port or 16-port RJ45 type KVMBe compatible with PS/2 / USB mouse and keyboard.Superior video quality.OVERVIEWTransmitting End:1. RJ45 Port of Transmitting EndPut one side CAT5 cable into this RJ45 port, put another side CAT5 interface into Receivers RJ45 port2. LED on-line instruction lightThe light is on when it’s connected with Receiver3. LED Power LightThe light is on when it’s connected with PC4. VGA PortConnect with HDB-15 port of PC5. Mouse & Keyboard InterfaceConnect with USB port of PC
Receiving End:KL-151KL-1531. Adjustable Turn-knobVideo Contrast adjustment2. Adjustable Turn-knobThree color primaries adjustment3. Receiver RJ45 PortReceive the signal from transmitting end.4. LED Power InstructionLED is light when it’s powered on.5. Power InterfaceDC port6. USB PortThe USB mouse & keyboard plug into these ports.7. PS/2 PortThe PS/2 mouse & keyboard plug into these ports.8. VGA PortIt is used to plug the monitor.
INSTALLATIONSINGLE INSTALLATION1. Plug your PS/2 / USB keyboard, PS/2 / USB mouse and monitor into the console port section located on theunit’s rear panel.2. Plug one end of the CAT5 UTP into the available RJ45 port on the switch.3. Plug the other end of the CAT5 UTP into the RJ45 port on the matching dongle. Connect the dongle to thecomputer.INSTALLATION TOGETHER WITH KS-3108 / KS-31161. Plug your PS/2 / USB keyboard, PS/2 / USB mouse and monitor into the console port section located onthe unit’s rear panel.2. Plug one end of the CAT5 UTP into the available RJ45 port on the switch.3. Plug the other end of the CAT5 UTP into the RJ45 port on KS-3108 / KS-3116.ILLUSTRATIONOPEARTIONUser can use hot key to do some switching operation.Port Switch: Quickly press L CTRL and release it, and then press R CTRL to switch between the two ports.Remote and Local Switch: When connected to KS-3108 / KS-3116, double click F12 to shift between local control and remotecontrol.
SPECIFICATIONType KL-151 KL-153ConnectorsKeyboard, Mouse PS/2,USB Female PS/2,USB FemaleVideo 1 x HDB-15 Female(Blue) 1 x HDB-15 Female(Blue)CAT5 RJ45 RJ45Video Adjustable No Adjustable KnobsVideoSignal type VGA VGAMinimum inputlevel0.5Vp-p 0.5Vp-pMax input level 1.0Vp-p 1.0Vp-pI/O impedance 75Ω 75ΩResolution 1280*1024 1280*1024Line Frequency 30-100KHz 30-100KHzField Frequency 40-120Hz 40-120HzStandardDistance MAX 100M MAX 300MPower DC5V 2000mA DC5V 2500mAStorage Temp -20˚C~60˚C -20˚C~60˚CWorking Temp -10˚C~50˚C 0˚C~50˚CDimension 125mm*74mm*23mm 125mm*74mm*23mmWeight 580g 600gColor BlackHousing MetalTransmission Distance:Cable Distance (m) Resolution（60Hz）CAT5/5e-CAT650 1920*1080150 1280*1024300 800*600The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changesor modifications not expressly approved by the party responsible for compliance could void the user's authority tooperate the equipment.In cases where the manual is provided only in a form other than paper, such as on a computer disk or over theInternet, the information required by this section may be included in the manual in that alternative form, provided theuser can reasonablybe expected to have the capability to access information in that form.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ** Reorient or relocate the receiving antenna. ** Increase the separation between the equipment and receiver. ** Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ** Consult the dealer or an experienced radio/TV technician for help.

Navigation menu