Swann Communications SWADS-WVDP720 Smart Video doorbell User Manual Smart Video Doorbell QSGWVDP720VER1E 3004
Swann Communications Pty Ltd Smart Video doorbell Smart Video Doorbell QSGWVDP720VER1E 3004
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3869730 |
| Application ID | UtnOXT3cJwMJqaGJAlmWNw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 20.94kB (261771 bits) |
| Date Submitted | 2018-05-30 00:00:00 |
| Date Available | 2018-05-30 00:00:00 |
| Creation Date | 2018-05-02 10:09:51 |
| Producing Software | GPL Ghostscript 9.10 |
| Document Lastmod | 2018-05-02 10:09:51 |
| Document Title | Smart_Video_Doorbell_QSGWVDP720VER1E-3004.pdf |
| Document Creator | PDFCreator Version 1.7.3 |
| Document Author: | kyzhou |
Installation Help and Resources Operating temperature: 14°F (-10°C) to 113°F (45°C) The Smart Video Doorbell can be mounted on the wall using the provided wall plate as shown below. Before mounting, make sure to test if the desired installation location has good Wi-Fi reception. Using the app, stream live from the Smart Video Doorbell there. If it streams smoothly, you've found a good place for your device. Ideal installation height Fit the video doorbell onto the mounting tabs on the wall plate then slide it down. Around chest-height, 1.6m / 5.2ft from the ground. Wall plate Mounting tabs Mounting screw holes If mounting to a wooden surface, screw the mounting plate directly to the surface. If mounting to a masonry surface (bricks, concrete), insert wall plugs before screwing the wall plate to the surface. Keep the security tool somewhere safe! When a visitor presses the doorbell button, you'll get a notification on your smartphone along with an audible chime sound. Open the notification to launch the SwannBuzz app automatically and see who is at your doorstep. Tap the MIC icon to talk to your visitor. Tap the END button to end the call. Light Ring Status Guide Wire terminals (external power source 16-24V AC option. For more information, visit support.swann.com) Once attached to the wall plate, insert the provided security tool into the small hole at the bottom of the video doorbell and rotate clockwise to tighten the internal security screw (do not overtighten). To detach for charging, loosen the security screw by rotating anti-clockwise, then lift up the video doorbell. Answering a call FCC Statement This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna • Increase the separation between the equipment and the receiver • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons. Solid Blue USB Charging Solid Red Live streaming / Motion detection recording Wi-Fi frequency range: 2412-2462MHz, Maximum Wi-Fi RF power: 19.89dBm Three Blue Blinks Doorbell button press EU Declaration of Conformity Hereby, Swann Communications, declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/ EU. A copy of the Declaration of Conformity can be found at: www.swann.com/uk/compliance Slow Blinking Blue WARNING: Modifications not approved by the party responsible for compliance could void user’s authority to operate the equipment. ENGLISH Smart Video Doorbell IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance. This Class B digital apparatus complies with Canadian ICES-003. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Wi-Fi Pairing mode Want more information? Visit Swann Support Center at support.swann.com. You can register your product for dedicated customer support, download guides, find answers to commonly asked questions, and more. RECYCLING: This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE) should not be disposed with other household wastes throughout the EU. This means that this product must be handled pursuant to European Directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Product Registration Product Guides Customer Support Support Community The symbol indicates DC voltage © Swann Communications 2018 The symbol indicates battery charge system Note: This device requires a Wi-Fi connection for operation QSGWVDP720VER1E QUICK START GUIDE Get to Know the Smart Video Doorbell Front Before using the Smart Video Doorbell for the first time, charge it for at least two hours with the included USB cable. Back Micro USB charging port Infrared LEDs (for night vision) Wall plate contact point (for external power) Plug the smaller end of the USB cable into the micro USB port on the back of the Smart Video Doorbell, and the larger end into a USB wall charger such as your smartphone charger (DC5V 2.1A power output recommended for faster charging). The light ring on the front of the Smart Video Doorbell will turn solid blue while charging. Reset button Passive infrared motion sensor Microphone Night detection sensor Light ring Doorbell button Speaker Security screw hole (bottom) Charge the Smart Video Doorbell Mounting slots When the Smart Video Doorbell is fully charged, the light ring will turn off. A full charge can take up to four hours if charging from a low battery state. Get the App Download and install the latest version of the SwannBuzz app from the Apple App Store® or Google Play™ Store on your iOS or Android smartphone. Simply search for "SwannBuzz". Set up the Smart Video Doorbell First time using the SwannBuzz app? Tap "Don’t have an account? Sign Up" and create your SwannBuzz account. This will allow you to view and manage your Smart Video Doorbell from any compatible smartphone. Already have a SwannBuzz account? After installation is complete, the SwannBuzz app icon will appear on your smartphone's Home or Apps screen. Tap the icon to launch the app. Enter your login credentials, then tap "Sign In". After signing in, tap "Set Up New Device" and follow the prompts to set up a Wi-Fi connection on your Smart Video Doorbell. Before you begin setup, be close to your router or access point and have your Wi-Fi network information (including password) handy. Please note that the Smart Video Doorbell can only be connected to a 2.4GHz Wi-Fi network.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 2 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:690b9e2d-5009-11e8-0000-7f68cb10bfd8 Producer : GPL Ghostscript 9.10 Keywords : () Modify Date : 2018:05:02 10:09:51+08:00 Create Date : 2018:05:02 10:09:51+08:00 Creator Tool : PDFCreator Version 1.7.3 Document ID : uuid:690b9e2d-5009-11e8-0000-7f68cb10bfd8 Format : application/pdf Title : Smart_Video_Doorbell_QSGWVDP720VER1E-3004.pdf Creator : kyzhou Description : () Author : kyzhou Subject :EXIF Metadata provided by EXIF.tools