Sweepscrub Kaercher B 140 R Rider Scrubber Quick Start Guide OBJ_DOKU 101441 001 User Manual
2017-10-25
User Manual: Sweepscrub Kaercher-B-140-R-Rider-Scrubber-Quick-Start-Guide kaercher-b-140-r-rider-scrubber-quick-start-guide 2352 file product_file sweepscrub
Open the PDF directly: View PDF .
Page Count: 5
Download | |
Open PDF In Browser | View PDF |
QUICKSTART B140R Warning These are only brief instructions! Please read and comply with these instructions prior to using or servicing your appliance. The non-compliance of the operating and safety instructions may lead to damages of the appliance and to dangers for the operator and other persons. Start up 1 A 2 A A Check if the battery plug is connected to the appliance. B A Sit on the driver's seat. Set main switch to “1”. B Check battery status. Note The device is equipped with a safety mechanism to prevent total discharge, i.e. when the permissible minimum capacity is reached, then the machine can only be driven and existing lamps can be switched on. In such a case, the battery monitoring symbol on the control console glows red. Drive the machine directly to the charging station; avoid any steep gradients in the process. 3 A B 4 A B D A Loosen the star handle screws. B Push the seat back into the desired position. Tighten star handle screws. C A Place the detergent bottle into the device. Close the bottle lid. Insert the suction hose of the dosaging equipment into the bottle. B Open the cover of the fresh water reservoir. C Fill up fresh water (maximum 60 °C) until the lower edge of filling nozzle. Close the cover of the fresh water reservoir. Model without dosing equipment "Dose" D Pour in detergent. Close the cover of the fresh water reservoir. 5.964-043.0 03/12 QUICKSTART Operation 1 A 2 A Starting the machine A Sit on the seat and set main switch to "1". D 3 B E C Driving A Set programme switch to step 1 (driving). B Drive forward Set the drive direction using the drive direction button at the operator console. C Reverse drive Set the drive direction using the drive direction button at the operator console. D Determine the driving speed by pressing the drive pedal. E Stop the machine: Release the drive pedal. Cleaning Programs A Scrubbing suction Wet clean the floor and vacuum up dirt water. B Wet scrubbing Wet clean the floor and allow the detergent to react. C Vacuuming Vacuum the wastewater. D Polishing Polishing the floor without the application of liquid. E Scrub the floor without applying water (vacuum polishing) Polish the floor without applying any fluid and suck in the polishing dust. F 4 A Manual cleaning Apply liquid detergent using the wall-ceilingfloor nozzle (optional) and vacuum it again. Info button Use the Info button to select the menu items and do the settings. A Turning the button to the right/left scrolls through the menus forward/ backward. The selected setting gets accepted by pressing the button. 5.964-043.0 03/12 QUICKSTART Operation 5 Switch on the dosing equipment for detergent (optional) A A Activate the switch for detergent dosing. Detergent gets added automatically. Finish operation 1 A 2 A A Only BR model: Remove bulk waste container and empty it. C 3 Emptying waste container A B D Empty tanks. 몇 Warning Please observe the local provisions regarding the wastewater treatment. A Take the water discharge hose from the support and lower above a suited collection device. B Rinse the dirty water tank with clear water. Take the water discharge hose from the support and lower above a suited collection device. Leave the cover open to let it dry. C Remove the suction hose coupling for draining off the fresh water and hold it over a suitable container. D Select the cleaning program "manual dry" via the program switch. Charging battery A Tilt the dirt water tank backwards. Remove battery plug and join it to the charging cable. Connect the charger to the mains and turn it on. 5.964-043.0 03/12 1 A 2 A 3 A 4 5 6 7 monthly daily Maintenance and care Kärcher Customer Service QUICKSTART A Check the fluff filter, clean if required B A Clean the vacuum lips and the wiping lips, check for wear and replace if required. B Clean the suction channel. A Check brush for wear and tear and clean it. Check the brushes for wear (bristle length at least 10 mm), replace if required. Only with R cleaning head Remove bulk waste container and empty it. Clean the outside of the appliance with a damp cloth which has been soaked in mild detergent. A A Clean the seals between dirt water reservoir and cover and check for tightness, replace if required. Have the prescribed inspection carried out by the customer service. 5.964-043.0 03/12 QUICKSTART Troubleshooting 1 A B C Appliance cannot be started A Insert battery plug. B Safety switch not activated, sit down on the seat. Set main switch to “1” C Check battery; charge it if required. 2 A B C Insufficient vacuum performance A Clean the seals between dirt water reservoir and cover and check for tightness, replace if required. B Check the fluff filter, clean if required C Clean the vacuum lips on the vacuum bar, turn or replace if required. D Check suction hose for blockages; clean if required. Check connection between suction hose and suction bar and suction hose and wastewater tank. D 3 A 4 A 5 A Insufficient cleaning result A Check brush for wear and tear and clean it. Check the brushes for wear (bristle length at least 10 mm), replace if required. B C Insufficient water quantity A Check fresh water level, refill tank if necessary. B Check that the hose coupling for draining the fresh water is connected. C Clean the fresh water filter. Open the ball tap. Brushes do not turn A Reduce contact pressure. – Check the brushes for blockage due to foreign particles, remove them if found. – Motor overload, allow to cool down. Set the key switch to "0". Wait approx. 10 minutes before turning the key switch to "1" again. 5.964-043.0 03/12