983300, 240 X Floor Scrubber.p65 Minuteman 240x Walk Behind Scrubber Parts And Operator Manual
2018-04-27
: Sweepscrub Minuteman-240X-Walk-Behind-Floor-Scrubber-Parts-And-Operator-Manual minuteman-240x-walk-behind-floor-scrubber-parts-and-operator-manual 2716 file product_file
Open the PDF directly: View PDF .
Page Count: 29
Download | |
Open PDF In Browser | View PDF |
240X Floor Scrubber Battery OPERATION Revised 6/02 SERVICE Model: MC240024QP, CE PARTS CARE Table of Contents Safety instructions ................................................ 1 Electrical requirements ........................................ 2 Control panel identification................................... 3 Operating instructions .......................................... 4 Squeegee adjustments........................................ 5 Brush installation/removal .................................... 6 Base assembly .................................................... 7 - 8 Tank assembly ..................................................... 9 - 10 Upper assembly ................................................... 11 Console assembly ............................................... 12 Motor lift assembly ............................................... 13 - 14 Scrudhead assembly ........................................... 15 - 16 Casting assembly ................................................ 17 Motor assembly ................................................... 18 Dashboard & back panel assembly ..................... 19 Squeegee lift & Squeegee mechanism .............. 20 Plastic housing assembly .................................... 21 Squeegee assembly............................................ 22 Wiring diagram, standard ..................................... 23 - 24 Wiring diagram, CE .............................................. 24 – 25 Warranty ............................................................... Back Cover IMPORTANT SAFETY INSTRUCTIONS CAUTION Operators must read and understand this manual before operating or maintaining this equipment. • Keep hands and feet clear of moving parts while machine is in operation. • All switches must be in the “OFF” position when charging batteries. • Electrical motors and components can cause an explosion when operated near explosive materials or vapors. Do not operate this machine nearflammable materials such as solvents, thinners, fuels, grain dusts, etc. • Make sure all switches are turned “OFF” and battery connections are removed before performing any maintenance procedures. • Store or park this machine on a level surface only. • These machines are designed for level floor operation only. DO NOT OPERATE on ramps or inclines. • Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not laytools or metal objects on top of batteries. • This machine is not suitable for picking up hazardous dust. Charging batteries generates explosive gases. DO NOT CHARGE BATTERIES WHEN OPEN FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off before disconnecting it from the batteries. Charge the batteries in a well-ventilated area. Maintenance and repairs must be performed by authorized personnel. SAVE THESE INSTRUCTIONS 1 ELECTRICAL REQUIREMENTS: This piece of equipment operates on 24 Volt DC. BATTERY REQUIREMENTS: 2 x 12V 210 Amp Hour 20 Hour Rate Deepcycle P/N 956210 BATTERY SERVICE AND INSTALLATION: Warning: Battery acid can cause burns. When working on or around batteries, wear protective clothing and safety glasses. Remove metal jewelry. Do not lay tools or metal objects on top of batteries. BATTERY INSTALLATION: 1. Raise tank assembly by gripping the front of tank and lift tank backward as shown in Fig. 1. 2. Install batteries as shown in Figure 2. CHARGING OF BATTERIES: Charging of batteries generates explosive gases. DO NOT CHARGE BATTERIES WHEN OPEN FLAMES OR SPARKS ARE PRESENT. DO NOT SMOKE. Make sure the charger is turned off before disconnecting it from the batteries. Charge the batteries in a well-ventilated area. Fluid levels should be checked before and after charging and maintained at the proper levels. 2 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. Squeegee lift lever Recovery dump hose Reverse handle Dashboard control panel Forward handle Safety bar switch Solution control lever Solution dump hose Quick disconnect - Aux. out (Deluxe only) Circuit breaker - Brush Circuit breaker - Vac Circuit breaker - System Circuit breaker - Transaxle Keyswitch Main power Emergency button Brush pressure gauge Brush control Pump switch Speed control Battery condition meter Vacuum control switch AUTO SCRUBBER BRUSH DESCRIPTION TYPE Bassine DESCRIPTION Natural Fiber DURABILITY* Short COLOR Dark Brown COMPARISON TO PADS Red Nylon Nylon Medium Black Tan/Red Dyna-Scrub Nylon impregnated with 500 Grit Silicon Carbide Fine Bristle, Dense Fill Nylon impregnated with 120 Grit Silicon Carbide Fine Bristle, Dense Fill Nylon impregnated with 80 Grit Silicon Carbide Coarse Bristle Nylon impregnated with 46 Grit Silicon Carbide Coarse Bristle Long Light Red Long Rust Red/Blue Long Green Long Dark Blue Power-Scrub Poly-Grit Strata-Grit Brown/Black Black RECOMMENDED USE Light duty general cleaning, acid etching General cleaning & scrubbing vinyl floors, ceramic tile & concrete floors General scrubbing, vinyl tile, ceramic tile, epoxy floors, urethane finish, uneven concrete floors Moderate aggressive scrubbing, tile floors, concrete floors Aggressive stripping and scrubbing, tile floors, unfinished concrete floors Heavy duty stripping/scrubbing unfinished concrete • Durability is dependent on floor surface, chemicals used and proper care. 3 OPERATING INSTRUCTIONS BEFORE STARTING, FAMILIARIZE YOURSELF WITH THE MACHINE AND ITS CONTROLS (SEE MACHINE OVERVIEW & CONTROL PANEL DIAGRAMS) 1. Filling: Fill the solution tank with the desired amount of water and add liquid cleaning solution to the proper dilution ratio. DO NOT USE powdered cleaning chemicals. Powders are unlikely to dissolve thoroughly, resulting in clogging the in-line solution filter. This can reduce or stop water flow to the brush. 2. Close lid. 3. Turn on machine by lifting the red emergency disconnect button (17) so it is in the up position. Turn keyswitch (15) clockwise to “on” position and turn on main power switch (16). 4. Adjust main speed control (21) to full counter-clockwise position. 5. Lower brush assembly. - To lower the brush, first push the pedal (10) slightly outward on the machine (unlock it), and then release it slowly or by pressing “brush down” switch (19) on Deluxe models. To lift the brush, press the pedal (10) down until lift mechanism engages or by pressing ”brush up” switch (19) on Deluxe models. Brush will come on automatically when brush in on the floor and “forward” (5) or “reverse” (3) handles are squeezed and remain on approximately 5 seconds after release. 6. Adjust solution control feed lever. 7. Select vacuum operations: - “Vacuum On” mode (23) - Vacuum will remain on until switched to the “off” position “Vacuum Auto” mode (23) - Vacuum will come on automatically when “forward” or “reverse” handle is squeezed, and scrubhead is on the floor. The brush and vacuum will remain on approximately 5 minutes. 8. Lower squeegee assembly by lowering handle (1). 9. Squeeze “forward” handle (5) and adjust forward speed (21) as desired. After Use: 1. Turn off solution feed. 2. Raise squeegee assembly. 3. Turn off vacuum motor. Solution and recovery tanks should be emptied after every use. MAINTENANCE: Daily 1. Clean float assembly & squeegee blades. Vac filter 2. Recharge batteries (check battery acid levels before and after charging). Monthly 1. Check wear on squeegee blades. 2. Grease front wheels. 3. Grease pivot points on brush motor assembly. Every 500 hours check condition of carbon brushes on vacuum motor and brush drive motor. 4 SQUEEGEE ADJUSTMENTS Squeegee Adjustment The squeegee set-up is pre-adjusted at the factory. Adjustments may be required to get optimum performance for different floors and conditions. Pitch Control Adjustment 1. Ensure that the scrubber is on a relatively flat surface. Pull the red emergency button away from the dashboard to activate power. Turn on the main power switch and turn the key switch clockwise to the on position. Raise the scrubhead off the floor. Turn the vacuum switch to the “vacuum only” position. 2. Turn the speed control knob counterclockwise to the low speed position. Lower the squeegee (item 1) to the floor and squeeze the forward control handle, move the machine one or two feet forward to check the rear squeegee blade for uniform deflection to the floor. 3. If uneven deflection or lay is evident, minor adjustments may be necessary to avoid streaking and uneven wear on the blade. 4. To correct this, pitch adjustment is necessary. Loosen the pivot screw (item 2) and the pitch screw (item 3). Move the machine forward and allow the squeegee to level itself or adjust the angular position accordingly to achieve a uniform blade deflection. Re-tighten screws. 5. In certain applications where a different blade set-up is required, the reinforcement blade (item 4) may be turned upside down. The notch, which is normally on the bottom will now be located on the topside. This allows the rear squeegee blade a larger deflection than normal. 5 BRUSH INSTALLATION - REMOVAL INSTALLATION 1. Raise the scrubhead to the “UP” position by pressing the switch “BRUSH UP” (B) switch as shown on Fig. 2 until the scrubhead stops retracting upwards. 2. Hold brush under the scrubhead casting while lining up the center of brush with the hex drive hub and pressing the brush up until the brush engages on the hub. REMOVAL 1. Raise the scrubhead to the “UP” position by pressing the switch “BRUSH UP” (B) switch as shown on Fig. 2 until the scrubhead stops retracting upwards. 2. Flip the handle up (Fig. 1) located at the middle of the plastic shroud. Push the handle towards the machine and the bracket underneath the casting will release both brushes at once. Replace handle in parked position. 6 BASE ASSEMBLY 7 Parts List Item Part No. Qty. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 200102 743506 200126 200172 361233 809148 712318 712759 712042 711544 711203 711505 200158 200153 711808 210415 260183 712564 200175 200154 715286 711125 713002 762333 200125 210048 712565 200145 200146 711228 711507 200233 712822 450076 200500 200236 711545 711161 828368 711594 715144 200237 833325 711160 260183 712908 200318MCH 200523 710178 260002-1 260003 260004 260005 260006 1 1 2 2 2 2 2 2 2 30 19 11 1 1 1 1 3 1 1 1 1 4 8 2 1 1 5 1 1 4 4 1 5 2 1 1 4 1 1 1 1 1 2 1 1 2 1 1 2 2 2 2 2 2 Base Transaxle 24V Transaxle Mount Tire, Pneumatic Key 3/16 sq. x 1.50 E-Ring 3/4 WSR-Flat 3/4 x 1.12 x .12 WSR-Flat 5/16 x 1.37 x .06 SS Bolt-WSR HH 5/16-18 x .62 WSR-Helical 1/4 BLT-HH 1/4-20 x .62 WSR-Flat 1/4 Pin Bracket Squeegee Mechanism Assy. Cotter Pin Clevis Pin 5/16 Nut 1/4 NPT Nyloc Bolt-HH 1/4-20 x 1 SS Back Panel Assy. Electrical Box Cover Decal, CB SCR-ST-B #10 x 1/2 BLT-HH 1/4-20 x .75 Caster, 3 1/2” Battery Tray Weldment Battery Liner SCR-MC 1/4 - 20 x .62 SS Hinge Hinge Plate Bolt-HH 5/16-18 x 3/4 WSR-Flat .37 x 1.12 x .06 Bottom Cover SCR-THMS 10-24 x 1/2 Crimp Clamp 185R SS Scrubhead Asm 240X Auxilliary Hose 48.50 WSR-Helical 5/16 Hi/Lo Screw #10 x 3/4 Male Coupler BH2-61 WSR-Flat .56 x .88 x .03 Decal Aux Pump Quick Disconnect Bracket Barb 90° Elbow 3/8 x 1/4 NPT Hi/Lo Screw #10 x 5/8 Nut-Nylon 1/4 NPT Nut-Wizz 10-24 Reservoir 240X Motor Cover SCR-MC 1/4-20 x .50 Truss Pad Driver, No Riser Bassine Brush Nylon Brush Poly-Grit Brush Strata-Grit Brush 8 BASE ASSEMBLY 9 Parts List Item Part No. Qty. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 200102MCH 200147 200173 210122 200232 200251 200258 200270 200023 210409 210410 210414 250039 260203 290017 760859 383321 200022 829129 430050 260155 200320 460019 710207 200234 130118 712540 712574 712667 200321 712568 832996 833316 740225 760245 760343 762384 830062 710180 711544 711505 715295 200024 712759 310008 712565 805613 200106 200267 200189 712562 711504 1 3 1 1 1 1 1 1 1 1 1 1 3 1 1 1 1 1 2 1 1 1 1 1 REF 1 3 1 2 1 1 1 1 1 2 1 2 1 3 6 6 1 1 4 1 3 1 1 1 1 12 12 Sol/Rec Tank Bracket, Vac Motor Float, Housing Drain Hose, Wirelock Cable, Tank Stand Pipe Assembly Muffler Assembly Hose, 3/4 Solution Drain Garden Hose Cap Fitting, Brass 3/8MPT Fitting, Brass 3/8FPT “O” Ring 2-113 Clamp, Plastic 5/16 3305 Hose Clamp, 102120 Murray Gasket, Molded, Vac Motor Clamp-Hose Elbow 3/4MPT 3/4BARB PP 3/4” MGHT x Hose Barb Clamp, Crimp 3/4 Hose Filter Screen 4x4 Foam Float Shut Off Weldment Gasket SCR-MC 6-32 x .87 ST PL Solution Hose Solution Strainer SCR-MC #10-24 x .375 SS CR Bolt SS 1/4-20 x 3” Nut-Hex 1/4-20 SS Nyloc Gasket, Shut Off SCR-MC 1/4-20 x 2.25 SS Terminal Black 2 Pole VDE Drain Plug Vac Motor 6515-13 24V Hose Clamp 62P24 Tube Hose 24/32B Bushing .277 x .375 x .37 SS Fitting Brass 90 3/8MPT SCR-MC 1/4-20 x .75 Lockwasher-Helical 1/4 Washer 1/4 Decal, 240X Black Vinyl Washer WSR-Flat .31 x 1.37 x .06 SS O-Ring SCR-MC 1/4-20 x .625 SS Hose Cuff, Grey Vinyl Bladder Bag Gasket, Bladder Frame, Bladder SCR-MC HH 1/4-20 x .75 SS Washer 1/4 SS 10 UPPER ASSEMBLY Parts List Item 1 2 3 4 5 6 7 8 9 10 11 11A 12 13 14 15 16 17 18 19 20 21 Part No. 200275 200178 200103 712120 710178 711503 711125 760286 200176 200180 200170 715284 383367 430053 711228 711545 711575 200032 450054 740711 740811 740800CE Qty. 1 2 1 2 6 2 5 1 1 1 1 1 1 1 6 6 6 1 1 1 2 1 Description Tank Assy. - Deluxe Gasket, Lid Tank Lid Shoulder Bolt 1/2 x 2 SCR-MC 1/4-20 x 1/2 WSR-Flat #10 SCR-ST-B #10 x 1/2 Wire Formed Hook Dump Hose Bracket Console Assy. TD/Deluxe Console Assy. - Brush Drive Decal, Solution Control Spring Clip Solution Control Cable Bolt-HH 5/16-18 x 3/4 WSR-Helical 5/16 WSR-Flat 5/16 Console Back Cover Weldment Vacuum Recovery Hose Switch Dreefs Switch Boot Switch Momentary 11 CONSOLE ASSEMBLY Parts List Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 Part No. 200104MCH 200134 200135 200181CTD 200295 712320 712540 711575 711545 711228 715258 715257 200151 711505 200338 200184 742472 711430 833329SA 200190CTD 743240 740944 Qty. 1 1 1 2 1 4 8 6 6 6 1 1 1 2 2 1 1 3 3 1 1 1 Description Console Machined Console Bracket Right Console Bracket Left Handle Wire, Coated Dashboard Assy. WSR-Nylon .22 x .45 x.04 SCR-MC #10-24 x .37 SS WSR-Flat .31 x .75 x .06 WSR-Helical 5/16 Bolt-HH 5/16-18 x .75 Decal, “Reverse” Decal, “Forward” Hinge Bracket Weldment WSR-Flat 1/4 Cam Weldment Switch Bracket Weldment Switch, McGill NC Nut-Tinnerman 6-32 Switch, Staggered Action Lever, Switch, Coated Harness, 200 Console Speed Control, 24V 1203A225 12 Item Part No. Qty. 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 200240 200241 670093 710207 710312 711004 712569 710534 711372 200340 829052 805637 711721 829052 710180 220324 711544 711203 200039 200040 711160 260210 1 1 1 4 2 2 1 2 2 2 1 1 6 4 2 2 6 6 1 1 8 1 Description Squeegee Lift Assy. Squeegee Lift Cable Spring, Compression SCR-MC 6-32 x .87 ST PL SCR-MC 6-32 x 1.75 ST PL SCR-SK 1/4-20 x .25 SS SCR-MC 1/4-20 x 1.50 SS SCR-MC #8-32 x 1” Nut, Nyloc #8-32 Spacer, S-C Board Nut, Hex 1/4-20 SCR Insulator Retaining Ring .312 Bushing Flanged, Nylon SCR-MC 1/4-20 x 1” Spring WSR-Helical 1/4 Bolt-HH 1/4-20 x .62 Bail Stop (RH) Bail Stop (LH) Screw Hi-Lo #10 x 5/8 PL Moisture Guard SCR 260TD MOTOR LIFT ASSEMBLY 13 Parts List Item Part No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 200249 260036 712310 711527 762340 260041 200509 711713 710207 740128 711430 833638 711368 740132 743032 712822 711807 711672 712126 711515 712683 200174 712638 200248 831965 711808 743503 833299 711505 712532 833325 450076 200282 200281 342430 743505 829463 828975 830062 383332 809413MCH 200259 210408 450040 710329 742391 200335 711372 760594 Qty. 1 2 4 6 2 4 1 2 2 1 1 2 2 2 1 2 1 1 1 6 1 1 1 1 1 1 1 1 5 5 2 2 1 1 2 1 1 1 1 1 1 1 1 1 2 1 1 2 2 14 Description Base Plate Weldment-Deluxe Pin Retainer WSR-Flat .52 x .88 x .06 WSR-Flat 5/8 x 1/12 x .12 Oilite Bushing 1/2 Oilite Flanged Bushing 1/2 Lift Arm Weldment-Deluxe E-Ring 1/2 SCR-MC 6-32 x .87 Microswitch Tinnerman Clip Brass Stud Wing Nut Insulator Glastic Terminal Block SCR-THMS 10-24 x 1/2 Cotter Hair Pin Clevis Pin 1/2 Shoulder Bolt 5/16 x 1.75 WSR-Flat .406 x .81 x .063 Nut-Nyloc 5/16-18 SS Pump Mounting Bracket Nut-Nyloc 10-24 SS Pivot Tube Clevis Pin 3/8 x 1.63 Cotter Pin Actuator Pump WSR-Flat 1/4 SCR-MC 10-24 x 1 SS Elbow 3/8 Barb x 1/4NPT Crimp Clamp 185R Hose Pump Inlet Hose Pump Outlet Fitting 3/8 Barb x 3/8 MPT Water Solenoid 24V WSR-Flat SS WSR-Neoprene .75 x 1.5 x .09 3/8 Street 90 Brass 3/8 Closed Nipple Solution Valve Machined Valve Bracket Fitting Brass Tee 3/8 NPT Elbow 3/8 Barb x 3/8 MPT SCR-MC 8-32 x .5 RFI Fliter RFI Bracket Nut-Nyloc 8-32 Spring, Extension SCRUBHEAD ASSEMBLY 15 Parts List Item Part No. Qty. Description 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 200038 200509 200525 200530 200531 200545 200548 200570 200574 200579 200586 200588 200589 260183 260292 430051 430074 670117 710180 711210 711375 711425 711504 711509 711564 711642 712122 712132 712301 712310 712540 712562 712564 712758 809311 833833 364-816 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 3 4 2 2 1 3 10 1 2 1 2 1 1 2 2 4 4 8 1 1 1 Handle Shaft Weldment 240X Lift Weldment Scrubdeck Casting Assy Spring Mount Belt Idler w/Bushing Brush Release Lever Weldment Bracket, Brush Release Cover Assy - 240X Scrubdeck Brush Motor Assy, 240X Belt, Brush Drive Idler Arm Weldment Extension Spring .875 OD x 6.00 Idler Arm Liner Nut 1/4 Npt Nylon, Half Spring Catch Return Spring 3.00” Adjusting Nut 17B/E Oilite Flanged Bushing SCR-MC 1/4-20 x .75 TR HD BLT-HH 1/4-20 x 1.25 STPL Nut-Nyloc 3/8-16 x 1/2 Nut Nut, Hex 1/4-20 Wiznut WSR-Flat 1/4 ID SS WSR-Flat 1/2 (.54x 1.082 x .087) WSR-External Lock 1/4 Roll Pin .187 x 1.00 BOLT-SHLDR 1/2 x 5/8 BOLT-SHLDR 1/2 x 1-3/4” WSR-Flat .87 x .38 x .06 WSR-Flat .52 x .87 x .06 PL SCR-MC 10-24 SS TH BLT-HH 1/4-20 x 3/4 SS BLT-HH 1/4-20 x 1.00 SS WSR-Helical 1/4 SS Pin Cotter 7/64 Dia x 1 Clevis Pin 1/2-13 Nyloc Half Nut 16 CASTING ASSEMBLY Parts List Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 Part No. Qty. 200514 2 200527 2 200532 2 200566 1 200578 1 210066 2 250016 2 320268 2 430075 3 711016 4 711512 2 711517 2 711702 2 711715 5 712564 1 712758 1 712761 1 200501MCH 1 200557MCH 1 200558MCH 1 430035-1 2 Description Shaft Driven Key 1/4 x 1/4 x 1/2 Bearing Idler Pin Pulley Bearing Assy Drive Hub Retainer Bolt Bearing Key 1/4 x 5/16 x 1.00 Threaded Insert SCR-SK 1/4-20 x .50 - Cup Pt Set SCR WSR-Flat .75 x 1.37 x .08 WSR-Flat .75 x 1.375 x .09 SS Retaining Ring, Int. 1.62 Retaining Ring, Axt 1.00 Bolt-HH 1/4-20 x 1.00 SS WSR-Helical 1/4 SS WSR-Flat .28 x 1.25 x .059SS 240X Scrubdeck Casting Drive Pulley Drive Pulley Drive Hub 17 DRIVE MOTOR ASSEMBLY Parts List Item 1 2 3 4 5 6 7 8 9 10 11 12 13 Part No. 200517 200518 200521 200528 200580 710975 710986 711516 711546 712318 712822 740209 827998 Qty. 1 1 1 1 1 1 4 1 4 2 2 1 2 Description Drive Pulley Poly V 240X Motor Plat Weldment 240X Motor Spacer Key 1/4 x 1/4 x 3/4 Hose Assy, 240X Scrubdeck SCR-SC 5/16-18 x .87 ST PL SCR-SC 3/8-16 x .87 ST PL WSR-Flat .31 x 1.25 x .05 WSR-Helical 3/8 WSR-Flat .75 x 1.12 x .12 PL SCR-MC 10-24 x .50 TH SS Motor 24V 1HP Clamp 18 19 Part No. 200179 715280 809874 743501 742102 740811 741005 740711 742202 743049 743240 Item 1 2 3 4 5 6 7 8 9 10 11 1 1 1 1 1 2 1 1 1 1 1 Qty. Dashboard Plate Decal 200 Dashboard Knob Meter, Hour Battery 24V Switch, 23670C4D Switch Boot Keyswitch On-Off Switch Dreefs Disconnect Switch 125A Gauge, Brush Pressure Harness 200X Console Description Parts List for 200295 DASHBOARD 1 2 2 2 1 3 1 1 1 1 3 2 8 1 1 2 1 2 4 200124 711368 740132 740238 740247 742000 740549 741037 740134-1 743250 788147 833638 711425 712823 712320 712536 740159 711210 742748 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Qty. Part No. Item Wing Nut, 1/4-20 Insulator (Glastic) Circuit Breaker 18 Circuit Breaker 30 Diode Assembly Circuit Breaker 50 5 Sec. True Off Delay Timer Shunt, Uncalibrated Wire Harness, Lower Assy. Solenoid 24VDC Brass Stud Whiz-Nut 1/4-20 SCR-THMS 10-24 x 1” WSR-Nylon .22 x .42 x .04 SCR 10-24 x .62 CB175 Red Housing Only SCR-HH 1/4-20 x 1 1/4 Boot, Circuit Breaker Backpanel Weldment Description Parts List for 200175-1 BACK PANEL 20 Part No. 200239 715603 200241 200261 200017 712070 831965 809311 881009 881002 711808 712041 200038 711642 711504 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 Qty. Parts List for 200240 Panel Cover Weldment Decal Squeegee Lift Squeegee Lift Cable Inner Arm Weldment Arm Squeegee, Lift Weldment Bolt, Shoulder 5/16 x .75 Clevis Pin 3/8 Cotter Pin 7/64 x 1” Yoke Clevis Pin 5/16 Cotter Pin #13 Bolt-Shoulder 5/16 x .44 Handle Weldment 3/16 X 1.00 Roll Pin WSR-Flat 1/4 SS Description SQUEEGEE LIFT Part No. 200144 200300 210375 210391 210415 260041 710180 711544 711519 711808 712320 900080 900081 200159 712536 712564 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 1 1 1 2 1 4 1 1 1 1 2 1 1 1 4 1 Qty. Parts List for 200153 Spring Housing Weldment Yoke Weldment Swivel Pin Return Spring SS Clevis Pin .31 x 1.7 11-097 Oilite Flange Bushing SCR-MC 1/4-20 x .75 ST PL WSR-Heliical 1/4 WSR-Flat .25 x 1.01 x .06 Cotter Pin - Hair #13 WSR-Nylon .22 x .45 x .04 Spring, Torsion RH Spring, Torsion LH Pin SCR-MC 10-24 x .62 SS BLT-HH ¼-20 x 1.00 SS Description SQUEEGEE MECHANISM COVER ASSEMBLY 200570 Parts List Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Part No. Qty. 200535 2 200551 1 200552 1 200553 1 200554 1 200555 1 200556 1 200571 1 200573 1 430085 2 710975 2 711160 11 712759 2 200522MCH 1 Description Roller Spacer Skirt, Left 240X Skirt, Center 240X Skirt, Right 240X Skirt Retainer, Left 240X Skirt Retainer, Center 240X Skirt Retainer, Right 240X Left Backer Plate, 240X Right Backer Plate, 240X Squeegee Bumper Wheel SCR-SC 5/16-18 x .87 ST PL #10 x 5/8 Hi-Lo WSR-Flt .31 x 1.37 x .06 SS 240X Scrubdeck Cover 21 22 Part No. 711668 711507 711808 210153 762281 200222 260203 260264 260272 711504 712668 712571 712572 712573 712574 Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2 7 2 2 2 1 1 1 1 12 8 2 2 2 2 Qty. Description Clevis Pin 3/8 x 1 WSR-Flat .37 x 1.12 x .06 Cotter Pin - Hair #13 Roller Wheel Bushing .37 x .500 x .25 Squeegee Casting, 200 Rear Squeegee Blade Reinforcement Blade Rear Blade Strap WSR-Flat .25 x .56 SS Wing Nut 1/4-20 SS Bolt-SS Carr 1/4-20 x 1.50 Bolt-SS Carr 1/4-20 x 2.00 Bolt-SS Carr 1/4-20 x 2.50 Bolt-SS Carr 1/4-20 x 3.00 16 17 18 19 20 21 22 23 24 25 26 27 28 29 Item Parts List for 200219 260273 260322 320191 711578 220249 320156 200169 320157 712301 711379 711374 712562 712758 712081 Part No. 1 1 1 2 2 1 1 1 1 1 1 4 4 2 Qty. SQUEEGEE ASSEMBLY - 200219 Description Front Blade Strap Squeegee Blade 260 Quarry Squeegee Mounting Bracket WSR-Flat 1/2 Brass Wing Bolt 1/2-13 x .75 Mounting Bracket - Right Pitch Control Weldment Mounting Bracket - Left WSR-Flat .37 x .87 x .07 Nut- Flanged Wizz 5/16-18 Nut-Nyloc 5/16-18 Bolt-HH 1/4-20 x .75 SS WSR-Helical 1/4 SS Bolt-Shoulder 3/8 x .75 23 24 240X WIRING DIAGRAM - MC240024CE 25 26 LIMITED WARRANTY Minuteman International, Inc. warrants to the original purchaser/user that this product is free from defects in workmanship and materials under normal use and service for a period of three years from date of purchase. In addition, Minuteman International, Inc. will, at its option, honor labor warranty claims for the first 12 months from date of sale, provided such claims are submitted through and approved by factory authorized repair stations. Minuteman International, Inc. will, at its option, repair or replace without charge, except for transportation costs, parts that fail under normal use and service when operated and maintained in accordance with the applicable operation and instruction manuals. This warranty does not apply to normal wear, or to items whose life is dependent on their use and care, such as belts, cords, switches, hoses, rubber parts, electrical motor components or adjustments. Parts not manufactured by Minuteman International, Inc. such as engines, batteries, battery chargers, hydraulic pumps, and tires are covered by and subject to the warranties and/ or guarantees of their manufacturers. Please contact Minuteman International, Inc. for procedures in warranty claims against these manufacturers. Special warning to purchaser — Use of replacement filters and/or prefilters not manufactured by Minuteman International, Inc. or its designated licensees, will void all warranties expressed or implied. A potential health hazard exists without exact original equipment replacement. All warranteed items become the sole property of Minuteman International, Inc. or its original manufacturer, whichever the case may be. Minuteman International, Inc. disclaims any implied warranty, including the warranty of merchantability and the warranty of fitness for a particular purpose. Minuteman International, Inc. assumes no responsibility for any special, incidental or consequential damages. This limited warranty is applicable only in the U.S.A. and Canada, and is extended only to the original user/purchaser of this product. Customers outside the U.S.A. and Canada should contact their local distributor for export warranty policies. Minuteman International, Inc. is not responsible for costs or repairs performed by persons other than those specifically authorized by Minuteman International, Inc. This warranty does not apply to damage from transportation, alterations by unauthorized persons, misuse or abuse of the equipment, use of non-compatible chemicals, or damage to property, or loss of income due to malfunctions of the product. If a difficulty develops with this machine, you should contact the dealer from whom it was purchased. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of special, incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above exclusions and limitations may not apply to you. World Headquarters Minuteman International, Inc. 111 South Rohlwing Road Addison, Illinois 60101 Minuteman Canada, Inc. 2210 Drew Road Mississauga, Ontario L5S 1B1 (630) 627-6900 FAX (630) 627-1130 (905) 673-3222 FAX (905) 673-5161 983300 Printed in U.S.A.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Create Date : 2002:05:29 18:23:21Z Modify Date : 2002:05:29 13:25:14-05:00 Page Count : 29 Creation Date : 2002:05:29 18:23:21Z Mod Date : 2002:05:29 13:25:14-05:00 Producer : Acrobat Distiller 5.0.5 (Windows) Author : jimkell Metadata Date : 2002:05:29 13:25:14-05:00 Creator : jimkell Title : 983300, 240 X Floor Scrubber.p65EXIF Metadata provided by EXIF.tools