9092735 Charger 2717 DB Illustrated Parts Book Nss Walk Behind Floor Burnisher Manual
2016-12-21
: Sweepscrub Nss-Charger-2717-Db-Walk-Behind-Floor-Burnisher-Parts-Manual nss-charger-2717-db-walk-behind-floor-burnisher-parts-manual 1606 file product_file
Open the PDF directly: View PDF 
.
Page Count: 16
| Download | |
| Open PDF In Browser | View PDF |
PARTS LIST CHARGER 2717 DB ORIGINAL INSTRUCTIONS CHASSIS AND DRIVE ASSEMBLY ITEM PART NO. DESCRIPTION 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 6498051 9122260 9122100 9122 180 2691181 6495891 9122180 9122100 9122260 2694069 2694081 2795211 2795221 2692271 9121310 2694051 9120850 9121317 6496521 9121380 6590521 9122180 9122100 9122300 3392571 3393121 2790101 9120850 9121400 9121520 9121640 9122260 9122100 9122180 9120930 9120880 9121250 6497291 9121420 2792681 2695011 2690581 9122260 9122100 9122180 6496541 9121410 6497201 9122260 9122100 9122180 3394571 6491860 9120330 9120380 6491871 6497061 QTY AXLE / PIVOT MOUNT 3/8‐16 X 1 HEX BOLT ‐ PACK OF 2 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 13/32 X 13/16 X .051 THICK WASHER ‐ PACK OF 10 PIVOT SPACER, STABILIZER BAR PIVOT 13/32 X 13/16 X .051 THICK WASHER ‐ PACK OF 10 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 3/8‐16 X 1 HEX BOLT ‐ PACK OF 5 #40 ROLLER CHAIN 57 LINKS WITH MASTER #40 ROLLER CHAIN 57 LINKS NO MASTER LINK ‐ MASTER #40 CHAIN NICKEL PLATED HALF LINK ( OFFSET LINK ) DRIVE WHEEL SPACER 1” 1.0 X .6875 1/4 SQUARE X 7/8 LONG KEY ‐ STEEL ‐ PACK OF 2 DRIVEN SPROCKET #34 TEETH 1/4‐20 X 5/16 SET SCREW ‐ KNURL POINT ‐ PACK OF 2 1/4 SQUARE X 3 3/4 LONG KEY ‐ PACK OF 2 10 INCH DRIVE WHEEL (GREY RUBBER) 5/16‐18 X 3/8 SET SCREW ‐ KNURL POINT ‐ PACK OF 2 1 I.D. X 1.5 O.D. X .13 THICK FLAT WASHER ‐ 10 GA 13/32 X 13/16 X .051 THICK WASHER ‐ PACK OF 10 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 3/8‐16 X 1 1/4 HEX BOLT ‐ PACK OF 2 AXLE, DRIVE WHEEL PILLOW BLOCK BEARING STRAIGHT ZERK DRIVE MOTOR 36 VOLT 1/4‐20 X 5/16 SET SCREW ‐ KNURL POINT ‐ PACK OF 2 3/8 I.D. 7/8 O.D. WROUGHT WASHER 5/16 ‐ PACK OF 10 5/16 SPLIT LOCK WASHER ‐ PACK OF 10 5/16‐18 X 3/4 HEX BOLT ‐ PACK OF 5 3/8‐16 X 1 HEX BOLT ‐ PACK OF 5 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 13/32 X 13/16 X .051 THICK WASHER ‐ PACK OF 10 9/32 I.D. X 5/8 O.D. FLAT WASHER (1/4) ‐ PACK OF 10 1/4 SPLIT LOCK WASHER ‐ PACK OF 10 1/4‐20 X 3/4 HEX BOLT ‐ PACK OF 10 DRIVE MOTOR MOUNT 5/16‐18 HEX NUT ‐ PACK OF 10 1/4” X 1/4” X 1” MOTOR KEY DRIVE SPROCKET, MOTOR WITH SET SCREW 1/4 SPADE MALE TERMINAL 10‐12 AWG, YELLOW 3/8‐16 X 1 HEX BOLT ‐ PACK OF 5 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 13/32 X 13/16 X .051 THICK WASHER ‐ PACK OF 10 BALL STUD ‐ GAS SPRING MOUNT 5/16 EXTERNAL STAR LOCK WASHER ‐ PACK OF 10 GAS SPRING MOUNT 3/8‐16 X 1 HEX BOLT ‐ PACK OF 5 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 13/32 X 13/16 X .051 THICK WASHER ‐ PACK OF 10 6” X 2” MAROON CASTER ASSEMBLY ROUND BEAD CHAIN ‐ CUT TO 8” #10 EXTERNAL STAR LOCK WASHER ‐ PACK OF 10 10‐24 X 3/8 ROUND HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 END COUPLING ROUND BEAD CHAIN CHASSIS / BODY 2 2 4 4 4 4 2 4 4 4 1 1 1 1 1 1 1 2 1 1 2 8 4 4 4 1 2 1 2 1 1 1 3 3 3 4 4 4 1 2 1 1 2 4 4 4 2 2 2 8 8 8 2 .7’ 1 1 1 1 CHASSIS AND DRIVE ASSEMBLY 3 HEAD ASSEMBLY ITEM 201 201A 202 203 204 205 206 207 208 209 210 210A 210B 210C 210D 211 212 213 214 215 216 217 PART NO. 5990731 9120205 9121490 9121520 9121985 9120827 6499781 9120980 9120880 9120950 6496519 6592531 6592552 9120350 9120450 9997590 6496721 7692421 9121410 6496621 6496881 9120660 DESCRIPTION SPRING CLIP PAD HOLDER SET ‐ INCLUDES: 8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW ‐ PACK OF 3 5/16‐24 X 7/8 HEX BOLT ‐ PACK OF 2 5/16 SPLIT LOCK WASHER ‐ PACK OF 10 13/32 I.D. X 1 O.D. X .12 THICK FLAT WASHER 11 GAGE ‐ PACK OF 1 3/16 SQUARE X 1” LONG KEY ‐ STEEL ‐ PACK OF 2 DRIVER, 27” FLEX‐LOC PAD 1/4‐20 X 1 SOCKET HEAD CAP SCREW ‐ PACK OF 5 1/4 SPLIT LOCK WASHER ‐ PACK OF 10 1/4 X 1 1/4 FENDER WASHER ‐ PACK OF 10 FLEXIWALL SHIELD 27 ASSEMBLY ‐ INCLUDES: BUMPER / BRUSH 27” BUMPER STRAP 27 10‐24 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 10‐24 X 1 ROUND HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 METAL CORE QUICKEDGE TRIM ‐ CUT TO 67” MOTOR ‐ 36 VOLT, 2100 RPM, 3.6HP TERMINAL BOOT (RED) 5/16 EXTERNAL STAR LOCK WASHER ‐ PACK OF 10 STEEL SKIRT ‐ 27” STUD WITH #10‐32 X 3/8, FILTER BAG 10‐32 X HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 4 QTY 1 3 1 1 1 1 1 3 3 3 1 1 1 1 1 5.6’ 1 1 2 1 1 1 HEAD ASSEMBLY 5 HEAD ARM ASSEMBLY ITEM 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 PART NO. 9120600 9120370 9120205 6793371 0393531 6496641 9122260 9122100 6497551 6496651 3392901 9122020 9120530 2790751 9122450 9122420 9122550 6496711 6496671 9122340 9122100 9122180 6497801 3393891 9122670 2391941 6498061 9121985 9122140 9121450 2395761 9121410 6496541 6496531 6496771 9120350 6496781 4991371 9121600 DESCRIPTION 10‐24 X 1/2 PAN HEAD PHILLIPS THREAD CUTTING SCREW ‐ PACK OF 10 7/32 I.D. X 1/2 O.D. X .032/.065 THICK FLAT WASHER (#10) ‐ PACK OF 10 8 X 1/2 PAN HEAD PHILLIPS SHEET METAL SCREW ‐ PACK OF 3 RUBBER FOOT NSS LOGO DECAL ‐ 3.5 X 4.0 MOTOR COVER 3/8‐16 X 1 HEX BOLT ‐ PACK OF 2 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 ARM ‐ 27 BRUSH ASSEMBLY GRIP BASE HANDLE GRIP 3/8 X 3/8 SOCKET HEAD SHOULDER BOLT ‐ PACK OF 1 10‐24 X 7/8 TRUSS HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 5 BUSHING SPACER 17/32 I.D. X 1 1/16 O.D. X .074/.121 THICK FLAT WASHER (1/2) ‐ PACK OF 5 1/2 SPLIT LOCK WASHER ‐ PACK OF 5 1/2‐13 X 1 1/2 HEX BOLT ‐ PACK OF 1 BAG, FILTER MEDIA COMPRESSION SPRING 1.75 X .935 O.D. 3/8‐16 X 2 HEX BOLT ‐ PACK OF 2 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 13/32 I.D. X 13/16 O.D. X .051/.080 THICK FLAT WASHER (3/8) ‐ PACK OF 10 GUIDE, SPRING COLLAR, SHAFT 1/2” 1/2‐20 HEX JAM NUT ‐ PACK OF 5 BALL JOINT SPACER 1/2 X 3/8 X ¾ 13/32 I.D. X 1 O.D. X .12 THICK FLAT WASHER (11 GAGE) ‐ PACK OF 1 3/8‐16 HEX NUT WITH NY=LOCK INSERT ‐ PACK OF 5 5/16‐18 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 5 CLAMP, TUBE 5/16 EXTERNAL STAR LOCK WASHER ‐ PACK OF 10 BALL STUD ‐ GAS SPRING MOUNT GAS SPRING (GGS 23‐120 I) ‐ INCLUDES: SPRING CLIP 10‐24 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 TILT SWITCH FULLY INSULATED MALE TERMINAL 22‐18 AWG 5/16‐18 X 5/8 HEX NUT ‐ PACK OF 5 6 QTY 4 4 2 2 1 1 1 1 1 1 1 4 2 2 2 2 2 1 2 2 2 2 2 2 2 2 2 2 2 1 1 2 2 2 2 2 1 2 1 HEAD ARM ASSEMBLY 7 CONTROL PANEL ASSEMBLY ITEM PART NO. DESCRIPTION 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 3392901 2691871 3393891 2391941 2694131 6496991 9120170 2691941 9122420 9122700 9120510 9120330 9120370 9120430 9120370 6496811 6491841 9120900 9120910 6496441 9120027 9120030 9120070 9120510 6496471 6497411 6497391 6496971 6496981 6496961 6496761 6496741 6497039 7692511 6497021 2397361 6496451 4990321 3394721 6498211 9120970 9120985 6498351 6497561 9120350 9120350 9120370 6496481 7692421 9121210 9120970 4490561 9120880 9121170 9121060 9122465 0691851 0798821 HANDLE GRIP HANDLE GRIP BASE COLLAR, SHAFT 1/2” BALL JOINT POTENTIOMETER POTENTIOMETER BRACKET 8‐32 X 3/16 SET SCREW ‐ KNURL POINT ‐ STEEL ‐ PACK OF 5 DRIVEN GEAR, POTENTIOMETER 1/2 SPLIT LOCK WASHER ‐ PACK OF 5 1/2‐20 X 1 HEX BOLT ‐ PACK OF 2 10‐24 X 1/2 TRUSS HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 10 EXTERNAL STAR LOCK WASHER ‐ PACK OF 10 7/32 I.D. X 1/2 O.D. X .032/.065 THICK FLAT WASHER (#10) ‐ PACK OF 10 10‐24 X 3/4 ROUND HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 7/32 I.D. X 1/2 O.D. X .032/.065 THICK FLAT WASHER (#10) ‐ PACK OF 10 WIRE ASSEMBLY, ANDERSON ‐ MACHINE ‐ INCLUDES: 175 AMP ANDERSON WITH CONTACTS GRAY 36 VOLT 1/4‐20 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 1/4‐20 HEX NUT WITH STAR LOCK WASHER ‐ PACK OF 10 CIRCUIT BREAKER ‐ 125 AMP 5/32 I.D. X 3/8 O.D. X 5/64 THICK SAE FLAT WASHER (#6) ‐ PACK OF 5 6 SPLIT LOCK WASHER ‐ PACK OF 10 6‐32 X 3/8 ROUND HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 10‐24 X 1/2 TRUSS HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 CONTROL FRAME CONTROL FRAME COVER SULKY READY DECAL BATTERY METER WITH HARNESS ‐ INCLUDES: BATTERY METER DISPLAY WIRE HARNESS, BATTERY METER ‐ 10 PIN BATTERY METER/CODES DECAL NAMING LABEL, CHARGER 2717 DB KEY SWITCH KIT (OPTIONAL) ‐ INCLUDES: KEY SWITCH & KEY WIRE ASSEMBLY, KEY SWITCH HOUR METER FAST‐ACTING FUSE 2 AMP FUSE HOLDER WITH NUT & WASHER FUSE DECAL CONTROLER, BURNISHER +DRIVE, 588TS 1/4 EXTERNAL STAR LOCK WASHER ‐ PACK OF 10 1/4‐28 X 3/8 PAN HEAD PHILLIPS MACHINE SCREW CONTROLER, 2717DB, UL, 0144 – 0001 DECAL, WIRING DIAGRAM 10‐24 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 10‐24 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 7/32 I.D. X 1/2 O.D. X .032/.065 THICK FLAT WASHER (#10) ‐ PACK OF 10 SOLENOID, 36 VOLT TERMINAL BOOT (RED) 1/4‐20 X 5/8 HEX BOLT ‐ PACK OF 10 1/4 EXTERNAL STAR LOCK WASHER ‐ PACK OF 10 INSULATED STANDOFF 1/4 SPLIT LOCK WASHER ‐ PACK OF 10 1/4‐20 X 1/2 HEX BOLT ‐ PACK OF 10 1/4‐20 X 1 1/4 HEX BOLT ‐ PACK OF 5 .516 I.D. X .813 O.D. X .027/.030 THICK FLAT WASHER ‐ PACK OF 2 1/2 INTERNAL STAR LOCK WASHER 5/8” HEX NUT (LARGE NUT) 8 QTY 2 2 2 2 1 1 2 1 2 2 2 2 2 4 4 1 1 2 2 1 2 2 2 5 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 5 5 1 1 4 2 2 1 1 1 1 1 1 1 2 2 2 2 CONTROL PANEL ASSEMBLY ITEM PART NO. DESCRIPTION 451 452 453 454 455 456 557 558 559 4491101 6496191 6496081 6496091 6496171 2691931 9120170 9120270 9120200 TOGGLE SWITCH, MOTOR HANDLE BAR 2716 BEARING PLAIN SLEEVE .5 X .75 X .75 LONG SPRING TORSION .81 I.D. .067 WIRE COLLAR, SHAFT 1/2” SET SCREW DRIVE GEAR, HANDLE BAR 8‐32 X 3/16 SET SCREW ‐ KNURL POINT ‐ STEEL ‐ PACK OF 5 8‐32 X 7/8 ROUND HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 8 SPLIT LOCK WASHER ‐ PACK OF 10 9 QTY 2 1 1 1 1 1 2 2 2 LID AND SIDE ASSEMBLY ITEM PART NO. DESCRIPTION QTY 501 502 502 502 502 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 9121270 6497531 2695861 6497791 2695861 6495701 6495711 0396271 9121210 9120880 9120930 4890451 9121037 6497811 6497071 9120900 9997590 4890851 9120900 9120900 9120930 9121010 6497051 7691891 6497081 9120930 9120900 9120520 9122260 9122100 9122260 9122180 9120350 9120370 4894071 9122000 9122100 9997560 9122180 8791070 3390661 2392481 2490601 6496551 9997550 6497581 3394141 7692271 9120390 3291111 9120810 2695841 6496461 1 1 1 1 1 1 1 1 3 4 3 1 8 2 1 8 1 1 4 1 1 1 1 1 1 4 4 1 4 4 2 2 1 1 1 2 2 3.8’ 2 1.3’ 1 1 1 1 .5’ 1 1 1 4 1 6 2 1 1/4‐20 X 1 HEX BOLT ‐ PACK OF 10 36 VOLT ON‐BOARD CHARGER 120/240 VOLT 25 AMP ‐ INCLUDES: CORD WRAP 36 VOLT ON‐BOARD CHARGER 25 AMP UL ‐ INCLUDES: CORD WRAP 120 VOLT ON‐BOARD CHARGER CORD 240 VOLT ON‐BOARD CHARGER CORD 240 VOLT ON‐BOARD CHARGER CORD – TYPE I PLUG (CHINA) 1/4‐20 X 5/8 HEX BOLT ‐ PACK OF 10 1/4 SPLIT LOCK WASHER ‐ PACK OF 10 9/32 I.D. X 5/8 O.D. X .051/.080 THICK FLAT WASHER (1/4) ‐ PACK OF 10 BUSHING, SNAPIN 1/4‐20 X 5/8 FLAT HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 LID HINGE LID, BODY 1/4‐20 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 METAL CORE QUICKEDGE TRIM ‐ CUT TO 12.5” CABLE CLAMP 1/4‐20 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 1/4‐20 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 9/32 I.D. X 5/8 O.D. X .051/.080 THICK FLAT WASHER (1/4) ‐ PACK OF 10 1/4‐20 X 3/4 TRUSS HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 5 RETAINING STRAP 18”, BRUSH HEAD NSS LOGO DECAL ‐ 3.5 X 20 SIDE PANEL 9/32 I.D. X 5/8 O.D. X .051/.080 THICK FLAT WASHER (1/4) ‐ PACK OF 10 1/4‐20 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 10‐24 X 5/8 TRUSS HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 3/8‐16 X 1 HEX BOLT ‐ PACK OF 2 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 3/8‐16 X 1 HEX BOLT ‐ PACK OF 2 13/32 I.D. X 13/16 O.D. X .051/.080 THICK WROUGHT WASHER (3/8) ‐ PACK OF 10 10‐24 HEX NUT WITH NY‐LOCK INSERT ‐ PACK OF 10 7/32 I.D. X 1/2 O.D. X .032/.065 THICK FLAT WASHER (#10) ‐ PACK OF 10 CLAMP, .437 DIAMETER CABLE 3/8‐16 HEX NUT ‐ PACK OF 10 3/8 SPLIT LOCK WASHER ‐ PACK OF 10 VELCRO LOOP, PRESSURE SENSITIVE 13/32 I.D. X 13/16 O.D. X .051/.080 THICK WROUGHT WASHER (3/8) ‐ PACK OF 10 VINYL HOSE, 3/8” I.D. X 1/2” O.D. TUBING CONTROL VALVE HOSE CLAMP, 7/32” ‐ 5/8” DIAMETER FITTING, ELL 3/8 BARB X 1/4 NPT BATTERY TRAY VELCRO HOOK, PRESSURE SENSITIVE DECAL, BATTERY WARNING – OBC OBC WARNING DECAL LIFT HANDLE 10‐24 X 3/8 FLAT HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 CORD CLAMP #10 X 1/2 PAN HEAD PHILLIPS MACHINE SCREW ‐ PACK OF 10 BATTERY CHARGER MOUNTING BRACKET 1/4 NPT PLASTIC NUT 10 LID AND SIDE ASSEMBLY 11 ELECTRICAL COMPONENTS ITEM 66 80 81 82 83 84 86 87 89 94 95 97 ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ ‐‐ 02 PART NO. 7691661 6496801 6496811 6496821 6496831 6496841 6496861 6496871 6496491 6496941 6496951 2391981 2690581 2694131 2790101 4490561 6496481 4491101 4990321 4991371 5392331 6496441 6497531 6495701 6495711 0396271 6496451 6496721 6498211 6496781 6496971 6496981 6496961 6497039 7692511 7692521 6497021 DESCRIPTION WIRING ASSEMBLY ANDERSON TO BATTERY WIRE HARNESS, BRUSH MOTOR WIRE ASSEMBLY, ANDERSON – MACHINE WIRE, BREAKER TO STANDOFF WIRE, SOLENOID TO CONTROLLER WIRE, CONROLLER TO STANDOFF WIRE, CONTROLLER TO DRIVE MOTOR WIRE, FUSE HOLDER ‐ MASTER SWITCH WIRE HARNESS, CONTROLLER ‐ 12 PIN WIRE, HOUR METER TO STANDOFF WIRE, WITH 2 AMP FUSE AND HOLDER BATTERY JUMPER 3/8” RING 1/4 SPADE MALE TERMINAL 10‐12 AWG, YELLOW POTENTIOMETER DRIVE MOTOR 36 VOLT INSULATED STANDOFF SOLENOID, 36 VOLT TOGGLE SWITCH, MOTOR FUSE HOLDER WITH NUT & WASHER FULLY INSULATED MALE TERMINAL 22‐18 AWG SWITCH (SULKY) CIRCUIT BREAKER ‐ 125 AMP 36 VOLT ON‐BOARD CHARGER 120/240 VOLT 25 AMP 120 VOLT ON‐BOARD CHARGER CORD 240 VOLT ON‐BOARD CHARGER CORD 240 VOLT ON‐BOARD CHARGER CORD – TYPE I PLUG (CHINA) FAST‐ACTING FUSE 2 AMP MOTOR ‐ 36 VOLT, 2100 RPM, 3.6HP CONTROLER, BURNISHER +DRIVE, 588TS TILT SWITCH BATTERY METER WITH HARNESS BATTERY METER DISPLAY WIRE HARNESS, BATTERY METER ‐ 10 PIN KEY SWITCH KIT (OPTIONAL) ‐ INCLUDES: KEY SWITCH & KEY REPLACEMENT KEY FOR SWITCH 7692511 WIRE ASSEMBLY, KEY SWITCH 12 QTY 1 1 1 1 1 1 1 1 1 1 1 5 2 1 1 1 1 2 1 2 1 1 1 1 1 1 2 1 1 1 1 1 1 1 1 1 1 WIRING DIAGRAM . 13 HEAD MOTOR ITEM PART NO. DESCRIPTION QTY 601 602 602 602A 602B 602C 603 604 605 606 607 608 608A 608B 609 610 6496721 5991731 6493531 6493541 6493601 6493591 7692041 6493631 9120600 6493621 ‐‐‐‐‐‐‐ 5991551 6493651 9120827 6493571 5991541 6493551 MOTOR 36 VOLT, 2100 RPM, 3.6 HP ‐ INCLUDES: COMMUTATOR BRACKET COVER COMMUTATOR BRACKET ASSEMBLY ‐ INCLUDES: COMMUTATOR BRACKET BRUSH BOARD ASSEMBLY ‐ INCLUDES: SPRING CARBON BRUSH STATOR FRAME ASSEMBLY ‐ WITH CLIPS AND MAGNETS ‐ 3 HP 10‐24 X 1/2 PAN HEAD PHILLIPS THREAD CUTTING SCREW ‐ PK 10 1/4‐20 X 9 HEX HEAD THRU BOLT ‐ 3 HP HELICAL WASHER – LARGE BEARING ‐ TOP END ARMATURE ‐ 2100 RPM ‐ 3.6 HP ‐ INCLUDES: 3/16 SQUARE X 1 LONG KEY ‐ STEEL ‐ PACK OF 2 ALUMINUM FAN BEARING ‐ BOTTOM END END BRACKET ‐ BOTTOM END 14 1 1 1 1 1 4 4 1 4 2 1 1 1 1 1 1 1 DRIVE MOTOR ITEM PART NO. DESCRIPTION QTY 701 702 703 703A 703A1 703A2 703A3 704 705 706 707 708 709 709A 709B 709C 710 711 712 2790101 ‐‐‐‐‐‐‐‐‐‐‐ 2797721 ‐‐‐‐‐‐‐‐‐‐‐ 2797681 2797571 ‐‐‐‐‐‐‐‐‐‐‐ 2797691 2797581 ‐‐‐‐‐‐‐‐‐‐‐ 2797651 9120600 2797591 2797661 5092041 2792681 2790311 2797711 2797731 ‐‐‐‐‐‐‐‐‐‐‐ DRIVE MOTOR ASSEMBLY 36 VOLT ‐ INCLUDES: PAN HEAD SCREW TOP COVER TOP END BELL ASSEMBLY BRUSH BOARD ASSEMBLY ‐ INCLUDES: BRUSH SPRING 10‐32 X 3/8 BRASS PAN HEAD SCREW CARBON BRUSH WITH LEAD AND TERMINAL LEAD ASSEMBLY ‐ 1 WIRE WITH TERMINALS HEYCO STRAIN RELIEF STATOR FRAME ASSEMBLY WITH MAGNETS 10‐24 X 1/2 SELF TAPPING ROUND HEAD SCREW ‐ PACK OF 10 HELICAL WASHER ARMATURE ASSEMBLY ‐ INCLUDES: BEARING TOP END ‐ COMMUTATOR END SHAFT KEY BEARING, BOTTOM END (SHAFT END) BOTTOM END BELL SHAFT SEAL THRU BOLT 15 1 3 1 1 1 1 4 4 2 1 1 3 1 1 1 1 1 1 1 2 ACCESSORIES PART NO. DESCRIPTION NOTE: ALL PADS COME 5 PADS PER CASE (EXCEPT TWISTER PADS) 7992751 27" LITE BLUE POLISH / BURNISH PAD ‐ FOR SOFT FINISH 7992761 27" LITE HAIR BURNISH PAD ‐ FOR ALL FINISHES 7992781 27" ULTRA HAIR HARD FINISH PAD ‐ FOR HARD FINISH 7992791 27" ULTIMATE HAIR PAD ‐HARD FINISH AGGRESSIVE BURNISHING 7992821 27" BEIGE PLUS UHS SCRUB PAD ‐ FOR SCUFF MARK TWISTER PADS 7992741 27” TWISTER RED PAD 7992731 27” TWISTER WHITE PAD 7992721 27” TWISTER YELLOW PAD 7992711 27” TWISTER GREEN PAD BATTERY & BATTERY CHARGER 2698441 DUAL PRO CHARGER FAN REFURBISHMENT KIT 2698421 DUAL PRO CHARGER RING TERMINAL REFURBISHMENT KIT NSS® Enterprises, Inc. 3115 Frenchmens Road Toledo, Ohio 43607 PHONE (419) 531-2121 FAX (419) 531-3761 mailus@nss.com www.nss.com CHARGER 2717 DB ORIG. 02-08 REV. L-1 04-15 9092735 16
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : fellhauj Create Date : 2016:05:12 11:03:33-04:00 Modify Date : 2016:05:24 16:10:42-04:00 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Format : application/pdf Title : Microsoft Word - 9092735 Charger 2717 DB Illustrated Parts Book Creator : fellhauj Creator Tool : PScript5.dll Version 5.2.2 Metadata Date : 2016:05:24 16:10:42-04:00 Producer : Acrobat Distiller 11.0 (Windows) Document ID : uuid:edfdc9b6-b387-4e9c-8b41-728e4567b3b1 Instance ID : uuid:da6af13f-0b13-43d6-8d04-fc7970b35f68 Page Count : 16EXIF Metadata provided by EXIF.tools