Windsor Clipper 12 Carpet Extractor Operators Manual

2016-12-29

: Sweepscrub Windsor-Clipper-12-Carpet-Extractor-Operators-Manual windsor-clipper-12-carpet-extractor-operators-manual 1797 file product_file

Open the PDF directly: View PDF PDF.
Page Count: 3

WINDSOR
MAINTENANCE
86372300
01) Drain recovery tank and
solution tank.
05) INSPECT BRUSH:
When the
black brush bristles reach the
height of the yellow indicator
bristles replace the brush.
04) Clean the brush and
vacuum shoe.
02)
Rinse and clean recovery
tank.
06) Store brush in the recovery
tank with the bearing side up
and vent the recovery tank
dome to let dry.
03) Cleantheoatshutoff.
07) Soak spray jets in a
solution of water and
vinegar overnight.
Clipper 12
WINDSOR
MAINTENANCE
00000000
WINDSOR
OPERATION
86372300
01)
Install jets and brush.
05)
Adjust handle for push or
pull cleaning and operator
height.
04) FOR SPOTTING:
Hook up
vacuum line, solution line,
and tool if necessary.
02)
Fill solution tank with extraction
rinse or fresh water and replace
the lid properly. The notch on
the lid should match up with the
notch in the tank.
06) Turn on brush motor.
03)
Make sure that all three prongs are on
the main body of the cord. If one of the
prongs is missing, notify your supervisor.
Plug into outlet and machine cord and
twist to lock.
07) Starting at the highest
setting, adjust brush height
setting by setting until you
hear the brush hit the carpet.
Clipper 12
WINDSOR
MAINTENANCE
00000000
WINDSOR
OPERATION
86372300
08)
Turn on the vacuum motor.
11) Unplug the cord from the
wallwhennished.
09)
Choose continuous or inter-
mittent spray. Press buttons
on handle to control spray on
intermittent mode.
10) Overlap 2-3” on ever pass, and
on intermittent spray release
button and continue pulling
for 1 foot before making a new
pass.
Clipper 12

Navigation menu