Swift IoT Tech SCC001 Smart Car Charger User Manual

Swift IoT Tech (Shenzhen) Co., LTD. Smart Car Charger

User Manual

Quick Start Guide Setting Up the App 1. Download the SwiftFinder app from the Apple App Store or the Google Play Store 2. Make sure your Bluetooth on the phone is on 3. Open the SwiftFinder app 4. Follow the prompts to allow SwiftFinder access to Bluetooth and Location Service so you can see your things on a map Powering On Your Smart Car Charger 1. Start the engine of your vehicle 2. Plug the smart car charger into your vehicle’s cigarette kighter or power port Linking your Smart Car Charger to the App 1. Tap the + button on the Things tab of the app
2. Select the Leaf Car Charger in the list 3. Sit on your vehicle and wait until the “Next” button appears at the bottom of the screen. It normally takes less than 10 seconds.
4. Take a picture of your vehicle and name it 5. Tap the save button on upper right corner of the app 6. Be happy because now the app will always remember when and where you parked your car!
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Support For technical support, advanced features, and usage tips, please send email to: cs@getleafware.com

Navigation menu