Swift IoT Tech SCC001 Smart Car Charger User Manual
Swift IoT Tech (Shenzhen) Co., LTD. Smart Car Charger
User Manual
Quick Start Guide
Setting Up the App
1. Download the SwiftFinder app from the Apple App Store or the
Google Play Store
2. Make sure your Bluetooth on the phone is on
3. Open the SwiftFinder app
4. Follow the prompts to allow SwiftFinder access to Bluetooth and
Location Service so you can see your things on a map
Powering On Your Smart Car Charger
1. Start the engine of your vehicle
2. Plug the smart car charger into your vehicle’s cigarette kighter or
power port
Linking your Smart Car Charger to
the App
1. Tap the + button on the Things tab of
the app
2. Select the Leaf Car Charger in the list
3. Sit on your vehicle and wait until the “Next” button appears at the
bottom of the screen. It normally takes less than 10 seconds.
4. Take a picture of your vehicle and name it
5. Tap the save button on upper right corner
of the app
6. Be happy because now the app will
always remember when and where you
parked your car!
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not
expressly approved by the party.
Responsible for compliance could void the user’s authority to operate
this equipment. (Example- use only shielded interface cables when
connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement.
The device can be used in portable exposure condition without
restriction.
Support
For technical support, advanced features, and usage tips, please send
email to: cs@getleafware.com