Syabas Technology STACKBOX An Apps Driven loT Hub (Gateway) User Manual xuan quick start guide4

Syabas Technology Hong Kong, Limited An Apps Driven loT Hub (Gateway) xuan quick start guide4

User Manual

Let’s get startedSupport Information & Your Hardware WarrantyFront CoverBack Cover 2001-2014 Cloud Media, All Rights Reserved.©thexuan.comStep 1: Connecting the STACK Box power supplyBack ViewSide ViewUSB2.0 PortsRS-232Power Ethernet PortUSB2.0 PortSD / MMCCard SlotOptocoupler/Opto-isolator ConnectionsWPS /Network ResetDesigned by CLOUD MEDIAin California and Malaysia.Assembled in China.Model : STACK BoxAn Apps Driven IoT Hub (Gateway)DC 5V RS-232IN1+ IN1- IN2- OUT1-IN2+ OUT1+ OUT2-OUT2+ResetWPS /Network Reset SD / MMCCloud Media One (1) Year Limited Warranty - The STACK BoxThe Cloud Media One-Year Limited Warranty is a voluntary manufacturer's warranty. Your Cloud Media-branded hardware product is warranted against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase ("Warranty Period"). If a defect arises during the Warranty Period, Cloud Media, at its option and to the extent permitted by law will (1) repair the product at no charge using new parts or parts that are equivalent to new in performance and reliability, (2) exchange the product with a functionally equivalent product that is new or equivalent to new in performance and reliability, or (3) refund the original purchase price. This warranty excludes damage resulting from abuse, accident, modications or other causes that are not defects in materials and workmanship.Other than the consumer law rights to which you are entitled, all warranties, conditions and other terms not set out in this warranty document are excluded from the Cloud Media One-Year Limited Warranty. Cloud Media does not warrant, represent or undertake that it will be able to repair or replace any Cloud Media Product under this warranty without risk to and / or loss of information and / or data stored on the Cloud Media Product. In no event shall Cloud Media be liable for (a) any losses that were not caused by our breach of this warranty document; (b) any loss or damage that was not, at the time of your purchase of the product, a reasonably foreseeable consequence of Cloud Media breaching this warranty document; or (c) losses relating to any business of yours, loss of prots, loss of data or loss of opportunity. The provisions of this warranty document shall not apply to (i) death or personal injury, (ii) fraud or gross negligence; or (iii) fraudulent misrepresentation; or (iv) any other liability that cannot be limited or excluded as a matter of law.To obtain warranty service, contact Cloud Media using the information described at http://support.cloudmedia.com/. Proof of purchase may be required to verify eligibility. Your Hardware WarrantyPage10Page1Model : STACK Box FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user'sauthority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant toPart 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates uses and can radiate radio frequency energy and, if notinstalled and used in accordance with the instructions, may cause harmful interference to radio communications.However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning theequipment off and on, the user is encouraged to try to correct the interference by one or more of the -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help following measures: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation CE StatementUse the product in the environment with the temperature between -10 and 40The plug considered as disconnect device of adapterAdapter Model: MX18W1-0503000VInput: AC 100-240V 50/60Hz 0.5A Output: DC 5.0V, 3.0AManufacturer: ShenZhen MingXin Power Technologies Co., Ltd.Hereby , Syabas Technology Hong Kong, Limited hereby declares that thisAn Apps Driven IoT Hub (Gateway), STACK Box is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
List of devices supported by the STACK BoxYou can check this list before purchasing any compatible devices:http://thexuan.com/compatibleYou can also visit our store: http://store.thexuan.com/To setup the devices with the STACK Boxa. While your mobile device is connected to the Internet, launch the Xuan app andlogin to your box. Launch the Automation app, and tap the + icon in the top right.b. While your PC is connected to the Internet, navigate to http://thexuan.com/setupin your web browser, and select the type of device you wish to add. If the information you’re looking for isn’t available, you can search for it on ourforums and wiki, or contact our technical support.Z-Wave Plus User Manualhttp://thexuan.com/manual/z-waveTechnical Support and Informationhttp://thexuan.com/app/rma-board-removalMore Informationhttp://thexuan.comAsk Questionshttp://forum.thexuan.comhttp://facebook.com/xuanboxhttp://twitter.com/xuanboxxuan@cloudmedia.comSubmit Formal Support or RMA Tickethttp://support.cloudmedia.com/Developer Infohttp://developer.thexuan.comDetails Technical Specificationhttp://thexuan.com/xuan_specifications.pdfSteps to Remove Defective Board for RMA RequestPowerFor use with the provided power adapter. Optocoupler/Opto-isolator ConnectionsConnector for older home control systems (optional).USB2.0 Ports, SD / MMC Card Slot and RS-232Connect to USB drive, SD Card and other technology-enabling modules to expandthe storage and the capabilities of the box (optional).WPS / Network ResetPress the button once to automatically: 1. Reconnect the box to your Wired LAN - Ethernet cable needed to be connected before you press the button.2. Reconnect the box to Wi-Fi - WPS button needs to be pressed on the network router at the same time you press the button.3. Make the box enters Hotspot mode (refer to Step 2) to perform further network configuration - Ethernet cable cannot be connected when you press the button.ResetPress the button for more than 4 seconds to restore the box to factory settings. Thisshould only be used if all other troubleshooting steps have failed.Page8Page3Setup through WPSWPSWPS /Network Reset SD / MMCStep 2: Connecting your mobile device with your STACKBoxInstall the iOS or Android Xuan app from the Apple App Store or Google Play Store.Please follow the first time setup instructions in the Xuan App. thexuan.com/ios thexuan.com/androidPage2Page9
Note: This product don't have these functions. only have WiFi function LED Status Indicator of The STACK Box Depend oninternetconnection.Usually ~ 8 minsOn On Off Blinking every0.25 secsOnline FirmwareUpdate In Progress<60 secsOn Blinking every0.25 secsOff Off WPS / NetworkReset In ProgressN/AOn Blinking every0.25 secsBlinking every0.25 secsOff Hotspot Mode(Refer Step 2)N/AOn Off Off Off Internet NotConnectedN/AOn On Off Off InternetConnectedN/AOn Blinking every0.25 secsOff Blinking every0.25 secsFailed to getIP. Retrying...<2 mins, thenfollowed bynormal PowerUpOff On On On SD Card/USBStorage (FATFormatted)Firmware UpdateIn ProgressPower LED Internet LED Attention 1 LED Attention 2 LED State Max. DurationOff Off Off Off Power Down N/AOn On On On Power Up <3 secs, thenwait maximum4 mins beforestart using thebox To get the most functionality from your STACK Box, it is recommended to performan online update once the box is first connected to the Internet.Online Firmware UpdateSD Card / USB Storage Firmware UpdateDownload the latest STACK Box firmware from http://thexuan.com/recovery-imageto your SD Card or USB Storage (FAT Formatted) and follow the instructions on the page to perform the firmware update.Go to ‘Home’ and select your box1Under My Apps, click on ‘Setup’2Click on ‘Firmware Update’3Scroll to the bottom, and click on ‘I Agree To Update’4Page6Page5USB2.0 PortsOptocoupler/Opto-isolator ConnectionsFor a pinout diagram and detailed information about the Optocoupler/Opto-isolator, Raspberry Pi-Bus, USB 3.3V Internal Bus and XBee Bus, please referto http://thexuan.com/bus_details.pdfHow to install internal technology-enabling modulesinside the STACK BoxUSB 2.0 3.3VInternal Buse.g. Z-Wave Sticke.g. XBee Pro (ZigBee) modulee.g. EnOcean moduleRaspberry Pi BusXBee BusSide OpenMake sure your mobile device is connected to the same network during the setup steps.Internet is not mandatory for the day-to-day operation of the STACK Box. Without internet connectivitya few features will be unavailable. Once the STACK Box is successfully connected, you may be prompted to update the firmware.NOTESetup through EthernetDesigned by CLOUD MEDIAin California and Malaysia.Assembled in China.Model : STACK BoxAn Apps Driven IoT Hub (Gateway)DC 5V RS-232IN1+ IN1- IN2- OUT1-IN2+ OUT1+ OUT2-OUT2+ResetWPSOpen the Xuan App after connect to the Xuan Wi-Fi SSID.Setup through Hot SpotXuan (85:77:E6)82%11:28 AMWi-FiWi-Filinksys&CHOOSE A NETWORK...SettingsairlinkPage4Page7

Navigation menu