Sylvania 6719DC User Manual TV/VCR/DVD COMBO Manuals And Guides L0610377

SYLVANIA TV/VCR or DVD Combo Manual L0610377 SYLVANIA TV/VCR or DVD Combo Owner's Manual, SYLVANIA TV/VCR or DVD Combo installation guides

User Manual: Sylvania 6719DC 6719DC SYLVANIA TV/VCR/DVD COMBO - Manuals and Guides View the owners manual for your SYLVANIA TV/VCR/DVD COMBO #6719DC. Home:Electronics Parts:Sylvania Parts:Sylvania TV/VCR/DVD COMBO Manual

Open the PDF directly: View PDF .
Page Count: 64

Download
Open PDF In Browser	View PDF

,_'VLIw_,.._

TV/DVD/VHS

_oOC (19
(27 inch
inchl

D _F'_
==._.o.

DB_
_
D , G, T A L

TruSurround/YIP3
by SRS(4))
_

wner's Manual is
_f recycled paper.

_/, ¸

_ ,_ _

ACCESSORIES

RUCCIONES

EN ESPANOL INCLUIDAS,

Remote Conm}l Uni_
Ba*:mries

"_ _ _ -

_ a

_ _

PART NO.
NE200UD
2 AA Batteries

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.

THIS

SYMBOL

GEROUS

INDICATES

VOLTAGE

THAT

RISK OF ELECTRIC
SHOCK
WITHIN THIS UNIT.
CAUTION:

TO REDUCE

THE RISK

THIS

OF ELECTRIC

SYMBOL

INDICATES

SHOCK, DO NOT REMOVE
COVER (OR BACK).
NO USER SERVICEABLE
PARTS INSIDE. REFER

ARE IMPORTANT

SERVICING
NEL.

LITERATURE

TO QUALIFIED

The caution marking

SERVICE

MAINTENANCE

PERSON-

DAN-

CONSTITUTING

1S PRESENT

THAT THERE

OPERATING

AND

INSTRUCTIONS
ACCOMPANYING

IN THE
THE

APPLIANCE.
is located on tire rear of the cabinet.

IMPORTANT

SAFEGUARDS

l.Read instructions-All the safety and operating instructions
should be read before the appliance is operated.

AMEUBLES- Cet appareil ire doit
&ire plac_ que SL!I'Ulr llreuble
(avec

2.Retain Instructions-The safety and operating instructions
should be retained lior future reference.

operatiug and use iustructions

$°Cleaning-Unphlg TV/DVD/VHS lrom the wall outlet belore
cleaning. Do plotuse liquid cleaners or aerosol cleaners. Use
a damp cloth lor cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and, that for some specilic reason, such as the possibility of the loss ol an authorization code lot a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the relereuce to
unplugging the appliance in the cleaning description otherwise required in item 5.
6.Attachments-Do not use attachments not recolnlnended by
the TV/DVD/VHS manulacturer as they may cause hazards.
7oWater and Moisture-Do not use this TV/DVD/VHS near
water4br example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.

roLdettes) recollrmaud_

D'AVERTISSEMENT

POUR

LESCOIvIPOSANTES
ET MEUBLE
A ROULETTES

par

le fabricant. Si vous l'instanez sur
un meuble h roulettes, d@lacez les
deux ensembles avec pr&aution.
Un arr&tbrusque, l'utilisation
d'ulre force excessive et des surfaces irr_guli_res risquent de d&tabiliser l'ensemble et de le renverser.

3oHeed Warnings-All warnings on the appliance and in the
operating instructions should be adhered to.
4.Follow Instructions-All
should be lollowed.

saus

SYMBOLE
ARPAREIL

9. Ventilation-Slots and openings in the cabinet and tire back
or bottom are provided for ventilation aM to ensure reliable
operation of the TV/DVD/VHS and to protect it from overheating, and these openings must not be blocked or covered. The openiugs should never be blocked by placing tire
TV/DVD/VHS on a bed sofa. lug, or other similar stulace.
This TV/DVD/VHS should never be placed lrear o1"over a
radiator or heat register. This TV/DVD/VHS should not be
placed iu a built-in installation such as a bookcase or rack
Lmlessproper ventilation is provided o1"tire lnanufacturer's
iustructions have been adhered to.
10.Power Sources-This TV/DVD/VHS should be operated
only lroln the type of power source iudicated ou the lnarkins label. II you are not sure of the type ol power supply to
your holne, consult yoLIrappliance dealer or local power
colnpauy. For TV/DVD/VHSs intended to operate h'om
battery power, or other sources, reler to the opel'ating
instructions.

8oAeeessories-Do not place this TV/DVD/VHS on an unstable
cart, stand, tripod, bracket, or table. The TV/DVD/VHS may
fall, causing serious injury to someone, and serious dalnage
1l,Groundhlg o1"Polarization-This TV/DVD/VHS is
to the appliance. Use only with a cart, stand, tripod, bracket,
equipped with a polarized alternating-current line plug(a
or tame recommended by the manulacturer, or sold with the
plug having one blade w'ider than the other). This plug will
TV/DVD/VHS. Any mounting of
lit into the power outlet only one way. This is a safety leatire appliance should follow tire
PORTABLE_CART
WARNING
ture. If you are unable to insert the plug lully into the outlnalrufacturer's
iustructiolrs
and
,,_I'l_
let, try reversing the plug. If the plug should still fail to lit,
should use a moulrtilrg
accessory
contact your electrician to replace your obsolete outlet. Do
recolmnended by the mauulacturer.
not defeat the safety purpose of the polarized phlg.
An appliance and cart combination
should be moved with care.Quick
12.Power-Cord Protection-Power-supply cords should be
stops, excessive force, and uneven
routed so that they are not likely to be walked on or
surfaces may cause the appliance
piuched by items placed upon or against rheim paying parand cart combination to overturn.
ticular attention to coMs at plugs, convenience receptacles,
and tire point where they exit from tire appliance.

-2-

EN
IBI5

FIGURE
EXAMPLE

OF ANTENNA

NATIONAL

A
GROUNDING

ELECTRICAL

AS PER

CODE
LEADIN
WIRE

GROUND
CLAMP_,

ANTENNA
DISCHARGE

UNIT

(NEC SECTION

810-20)

ELECTRIC
SERVICE
GROUNDING
CONDUCTORS
(NEC SECTION 810 21)

NED

NATIONAL

ELECTRICAL

CODE

-.-_--111-_*

S2898A

POWER SERVICE GROUNDING
ELECTRODE
SYSTEM
(NEC ART 250

13.Ontdoor
Antenna grounding-If
an outside anterma or
cable system is conuected to the TV/DVD/VHS,
be sure
the antenna or cable system is grounded so as to provide
some protection against voltage surges and built-up static
charges. Article 810 of the National Electrical Code,
ANSI/NFPA No. 70, provides information with respect to
proper grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge unit,

19.Damage Reqniring
Service-Unplug
this TV/DVD/VHS
from the wall outlet and refer servicing to qualified service
personnel under the _iAlowing conditions:
a. When tire power-supply

This will prevent damage to the TV/DVD/VHS
lightning and powe>line surges.

due to

cord or plug is damaged

b. If liquid has been spilled, or objects have fallen
TV/DVD/VHS.
c. If the TV/DVD/VHS

has been exposed

d. If the TV/DVD/VHS

does uot operate

size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements
li_r the grounding electrode. (Fig. A)
14.Lightning-For
added protection lior this TV/DVD/VHS
receiver during a lightning storm, or when it is left una>
tended arr(I unused tk_l"long periods of tilne, unplug it from
the wall outlet and disconnect the antenna or cable system.

PART R)

to rain or water.
nonnally

by tc, llow-

irrg the operating instructions. Adjust only those controls
that are covered by tire operating instructions, as improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the TV/DVD/VHS
to its normal operation.
e. If the TV/DVD/VHS
way.

has been dropped

or dalnaged

f. When the TV/DVD/VHS
exhibits a distinct
fonnance-this
irrdicates a need Mr service.

l,_.Power Lines-An outside antenna system should not be
located in the vicinity of overhead power lines or other
electric light Ol"power circuits, Ol"where it cart fall into
such power lines or circuits. When installing an outside

or frayed.
into the

in arty

change in per-

2(LReplaeement
Parts-When replacement parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer
that have the salne character-

antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them
might be fatal.
16.OverJoading-Do
not overload wall outlets and extension
cords as this cart result in a risk of fire or electric shock.
17.Object and Liquid Entry-Never
push objects of arty kind
into this TV/DVD/VHS
through openings as they lnay
touch dangerous voltage points or short out parts that could
result in a fire Ol"electric shock. Never spill liquid of any
kind on the TV/DVD/VHS.

istics as the original part. Unauthorized substitutions lnay
result in fire, electric shock, injury to persons or other hazards.
21.Safety Cheek-Upon
completion ol any service or repairs to
this TV/DVD/VHS,
ask the service technician to perform
routine salety checks to determine that the TV/DVD/VHS
is in proper operating

condition.

22.Heat-This
TV/DVD/VHS
product should be situated away
from heat sources such as radiators, heat registers_ stoves,
or other products (including amplifiers) that produce heat.

18.Servidng-Do
trot attelnpt to service this TV/DVD/VHS
yourself as opening or relnoviug covers may expose you to
dangerous voltage or other hazards.
qualified service personnel.

Refer all servicing

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
ATTENTION: POUR EVITER LES CHOC ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.

-3-

EN
IBI5

IMPORTANT

LASER

INFORMATION

Unaufl_ofized copying, broadcasting, public performance and lending of discs are prohibited.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE,

are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change
or modification is made.
RADIO-TV

CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN ()PEN AND INTERLOCK
DEFEATED, DO NOT STARE INTO BEAM,
LOCATION: INSIDE, NEAR THE DECK
MECHANISM,

INTERFERENCE

This equipment has been tested trod found to comply with the limits for a Class B digital device, pursutmt to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation.

This Class B digital apparatus
Canadian ICES-003.

This equipment generates, uses, and ctm radiate
radio frequency energy and, if not installed and
used in accor&mce with the instructions, may cause
harmful interference to radio communications.

1) Reorient

or relocate

the receiving
between

complies with

Cet appareil num_rique de la classe Best conforme h la norme NMB-O03 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT,

However, there is no guar_mtee that interference
will not occur in a particular installation.
If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
2) Increase the separation
and receiver,

SAFETY

This unit employs a laser. Only a qualified service
person should remove the cover or attempt to service this device, due to possible eye injury.

ATTENTION: POUR I_VITER LES CHOC
I_LECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU'AU FOND,

antenna.
the equipment

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
4) Consult the dealer or an experienced
technician for help.

radio/TV

-4-

EN
IBI5

For safe operation mid satisfactory performance of
your TV/DVD/VHS, keep the following in mind
when selecting a place for its installation:
® Shield it from direct sunlight and keep it away from
sources of intense heat.
® Avoid dusty or humid places.
,, Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top mid bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.

Moisture condensation
may occur inside the unit
when it is moved from a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD/
VHS which has moisture, it may damage the DVD
and TV/DVD/VHS.
Therefore when the condensation
occurs inside the unit, turn the POWER button on
and allow at least 2 hours for the unit to dry out.

* Install unit in a horizontal position.
,, Avoid locations subject to strong vibration.
® Do not place the TV/DVD/VHS nero strong magnefic
fields.
® Avoid moving TV/DVD/VHS to locations where
temperature differences am extreme.

® Do not hgmdle the power cord with wet hands.
,, Do not pull on the power cord when disconnecting
it from an AC wall outlet. Grasp it by the plug.
• If, by accident, water is spilled on your unit, unplug
the power cord immediately
mid take the unit to our
Authorized Sel-vice Center for servicing.
• Do not put your fingers or objects into the
TV/DVD/VHS
disc loading tray.
,, Do not place anything

directly

on top of the unit.

A NOTE ABOUT RECYCLING
This product's packaging materials arc recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accor&mce with your local regulations concerning chemical wastes.
The serial number of this product may be found on the back of the unit. No other TV/DVD/VHS has the same
serial number as yours. You should record the number trod other vital information here and retain this book as
a permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
-5-

EN
IC29

ABLE
m IMPORTANT

SAFEGUARDS

m PRECAUTIONS

.....

................

LOCATION

...................

))4 C )N

SLOW MOTION

)i]N S

..............

PICTURE SEARCH
STILL PICTURE

............
..............

VERTICAL HOLD CONTROL
.5

WARNING

RENTAL PLAYBACK

AUTO REPEAT PLAYBACK

m FEATURES

....................
....................

m OPERATING
FUNCTIONS

CONTROLS
...................

m PREPARATION

FOR USE

.......

11
11

CONNECTING TO EXTERNAL
1NPT JACKS .................

EXTERNAL

THE BATTERIES

. .12

INPUT MODE ......

12
13

CONNECTING TO AN AMPLIFIER
EQLJIPPED WITH DIGITAL INPUT
JACKS, MD DECK OR DAT DECK
(for DVD) ....................
13
CONNECTING TO A DOLBY
DIGITAL DECODER
OR DTS DECODER (for DVD) ...14
.............

CHANNEL SET UP
FOR THE FIRST TIME
DELETING
CHANNEL

.........

(OR ADD1NG/
...................

CHANNEL SET tIP AGAIN ......

SELECTING THE LANGUAGE
DAYLIGHT-SAVING

. .16

TIME ......

CLOCK SET UP
(AUTO / MANUAL) ............

TV/VCR SECTION
m TY OPERATION

.....

REPEAT

..........

REAL TIME TAPE COUNTER
AUTO REWIND-EJECT
.................

. ..............

19
...19

................

PICTURE CONTROL ...........
CLOSED CAPTION SYSTEM

19
....

V-CHIP SET UP ...............

2(1

CHECKING THE SELECTED
MTS MODE ..................

43
43

PLAYING AN MP3 DISC IN A
PROGRAMMED WAY ..........

PLAYING AN MP3 DISC AT
RANDOM ....................

.44

..........

EXTENSION

.33

CHANGING THE CAMERA
ANGLE (Multi-Angle Pictures) ....

CHANGING THE ON-SCREEN
DISPLAY ....................

HINTS FOR AUTOMATIC TIMER
RECORDING .................
34
AUTO RETURN ...............

SLEEP TIMER

................

m ON SCREEN DISPLAY

.........

m CABLE CHANNEL
DESIGNATIONS
..............

THE DISCS

............

PLAYABLE DISCS

............

.................

SYMBOLS USED 1N
THIS MANUAL ...............

..............

37
36

USING THE DVD MENUS

......

USING THE TITLE MENU

......

FAST FORWARD/REVERSE

26
26

PAUSING PLAYBACK OR DISPLAYING
A STILL PICTURE .............

STEPPING

.38

.........

TRACKING ADJUSTMENT

.....

SETTINGS

AUDIO SETTINGS

........

...........
............

CODE LIST

m TROUBLESHOOTING
m MAINTENANCE

........

GUIDE

...............

DISC HANDLING
m SPECIFICATIONS
...........

.47
47
48
49
50
S1

...52
55

.............

. ............

Back Cover

38
.....

THROUGH FRAMES

-6-

m LANGUAGE

m WARRANTY

PLAYING A DVD VIDEO OR AN
AUDIO CD ...................

2.5

...................

THE SETUP ITEMS

LANGUAGE

PARENTAL LOCK .............

NORMAL PLAYBACK

m CHANGING

DISPLAY SETTINGS

.24

m PLAYBACK

CHANGING THE SUBTITLE
LANCdJAGE .................

SELECTING THE MTS SYSTEM
.............

...................

......................

RESUMING PLAYBACK
FROM THE POINT WHERE
PLAYBACK STOPPED .........

CASSETTE

m SETTINGS

CHANGING THE AUDIO
LANGUAGE OR SOUND MODE

ALJTOMAT1C
TIMER RECORDING

DISC TYPES

PLAYING AN MP3 DISC FROM
A DESIRED TRACK ...........

MTS RECORDING/MONITOR
MODE ......................

m VIDEO

(Audio CD) .........

COPYING A VIDEO CASSETTE
(Requires a VCR or camcorder)
. . .31

m PLAYING A DISC
23

PROGRAM

CHANGING THE ONSCREEN
DISPLAY DURING MP3
DISC PLAY ..................

m MTS(Multi-Channel
Television
sound) SYSTEM ................

PLAYING AN MP3 DISC ........

OTR (One Touch Recording) ......

m ABOUT

.................

....................

TIMER PROGRAM

MARKER

42
42

SKIPPING UNWANTED SCENES
DURING
RECORDING .................

m TIMER

A-B REPEAT

30
........

. ....................

RANDOM (Audio CD} ..........
ZOOM PLAYBCK .............

...29

........

..............

m SPECIAL FEATURES

m RECORDING

...............

..............

STARTING FROM A DESIRED
TRACK ......................

DVD SECTION

WATCHING A TV PROGRAM
DEGAUSSING

TIME SEARCH

STARTING FROM A DESIRED
TIME COUNT .................

..........

NORMAL RECORDING

CONNECTING TO A STEREO
SYSTEM (for DVD) ............

m SET UP FOR USE

..........

...............

INDEX SEARCH

ANTENNA/CABLE
CONNECTIONS ...............

INSTALLING

ZERO RETURN

PLAYING FROM A DESIRED
TITLE OR CHAPTER ..........

...26

m SEAR(&lg .....................

AND

SLOW MOTION

26
26

AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE

m SPECIAL PLAYBACK

EN
IC29

[ TVNCB

]

® Hi-Fi system-The
Hi-Fi stereo recordh_g system
offers you excellent sound quality with a dynamic
range of 80dB, frequency response from 20Hz to
20kHz, and (I.(105% wow and fluttm:
* Rotary 4-head Record/Playback System-Four heads
ensure excellent picture quality and special effects playback.
,, Index Search-Fast-forwards
to start of next recording.
* Slow Motion-View
recorded
than normal speed.
* Infrared remote control

program

® 2 Step picture search operation-You cml view a
video program at a high speed or super l]igh speed
in either a forward or reverse direction in LP guld
SLP mode. For SP mode only high speed.
. Three different playback tape speeds : SP/LP/SLP
® Two different recording tape speeds : SP/SLP
® Auto Head Cleaner-Automatically
cleans video
heads as you insert or remove a cassette.
,, Zero Return-The
tape returns to counter of
0:00:00 by rewinding or fast forwarding.
. Still-"Freeze"
the picture at guly time, for close
viewing of a particular scene.

at slower

. Trilingual on screen tv/vcr setup display
table in Engmish or Spanish or French

selec-

* Digital
adjusts
* Rental
quality

,, Real time counter-This
shows the elapsed recording
or playback time in hours, minutes, and seconds. The
"-" indication will appear when the tape is rewound
furd_er thgm the tape counter position "0:00:00".
* 181 channel capability PLL frequency synthesizer tuner with direct station call-(A convmler may
be necessary to view- scrambled cable ch_umels.)

Auto Tracking (DTR)-Automatically
the tracking for each tape you play.
play mode-Improves
playback picture
from worn tapes, such as rental tapes.

. Auto repeat-Allows
you to repeat the playing of a
tape indefinitely
without pressing the PLAY button.
,, Time search-Let
you set the TV/DVD/VHS
to
adwmce the tape by entering the desired playback
time you wmlt to skip.
* OTR (One Touch Recording)-lnstant timed
recording from 30 to 480 minutes is possible at tile
push of the REC/OTR
button.

,, Auto Clock Setting-Allows
you to set the clock
function from a PBS broadcast station.
* Closed caption system-You
may view- specially
labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or
text display added to the program.

* 1 Year, 8 events (including Daily and Weekly
Timer Recording)-The
built-in thner allows you to
record up to 8 programs at different times on different channels up to 1 year in adwmce. The Daily
thner allows recordings to be made of daily broadcasts, guld the Weekly timer allows recording to be
made once a week up to the end of the tape.
* Auto return-After
timer recording is finished, the
TV/DVD/VHS can return to the beginning of the
recording.

® Auto power on and off system-Automatically
turns on the TV/DVD/VHS
when you insert the
cassette, tmns off after auto-mw-ind, and ejects
when the beginning of the tape is reached.
* Auto rewind when the end of a tape is
reached-This
function doesn't occur when using
thner recording.
,, Smooth mode change-TV/VCR
mode, DVD
mode automatically
changes without control.

* Sleep timer-Allows
you to have the TV/DVD/VHS
automatically turn on or off at a desired time.
Timer Program Extension-Allow
you to shift the
time schedule for automatic timer recording.
,, V-CHiP-Enables
parents to prevent their children
from watching inappropriate
material on TV.

A NOTE

ABOUT

RECYCLING

This product's packaging materials are recyclable
accordance
with your local recycling regulations.

and cgul be reused.

Batteries should never be thrown away or incinerated
tions concerning chemical wastes.

but disposed
- 7 -

Please dispose
of in accor&mce

of any materials

with your local regulaEN
IC29

[ DVD ]
• Dolby Digital surround
This player can handle Dolby
Digital
surround
having 5.1 channels
when connected
to a Dolby
decoder.

• Sleep timer
Allows you to have the TV/DVD/VHS automatically
turn off at a desired time.

sound
Digital

• Still/fast/slow/step
playback
Various playback modes are available irrcluding still pictures, fast forwardh'everse, slow motion arrd step frames.
= Random playback for audio CD and MP3
This player can shuffle tire oMer of tracks to play them in
random order.

• Search
Chapter

search:

Search for
is possible.
Search for
possible.
Search for
possible.
Search for
possible.

Title search:

• Program
playback for audio CD and MP3
You can program tire order of tracks to play them
desired order.
= DVD menus in a desired
language
You can display DVD menus in a desired
available on a DVD.

• DTS (Digital Theater
System)
You can enjoy 5.1channel
surround system developed
by
the Digital Theater System co. which reproduces the origirral sound as truthfully
as possible.

in arty

language,

Track

search:

Time

search:

it"

• Screen saverlAuto power-off functions
The screen saver program starts when there is no input
from the player for five minutes in the stop mode. When
the screen saver program is activated for 30 minutes, the
DVD power is automatically turned off. and "DVD"
appears on the screen.
• Subtitles in a desired language
You can select a desired language for the display subtitles,
if that language is available on a disc.
• Selecting a camera angle
You can select tire desired camera angle, it"a disc contains
sequences recorded fl'om different arrgles.

• Resume
Play
User can resume
play was stopped.

• Automatic

detection

of discs

This player automatically
detects
audio CD or MP3 on disc.

the title designated

by user is

the track designated

by user is

the time designated

by user is

MP3 disc being

= Parental

playback

by user

Repeated
playback
of the chapter of the
disc being played is possible.
Title:
Repeated
playback of the title of the disc
being played is possible.
Track:
Repeated playback of the track of the disc
being played is possible.
Disc(audi0 CD): Repeated playback of the entire disc being
(MP3)
played is possible.
A-B:
The part between A arm B designated
by
user is possible.
Album:
Repeated
playback
of the folder of the

• Choices for audio language and sound mode
You can select tire desired audio language and sound
mode, it"different languages and modes are available on a
disc.
You can set tire control level to limit
which may not be suitable for children.

designated

• Repeat
Chapter:

• Zoom

lock

the chapter

2-time

and 4-time

magnified

played

screen

is possible.

can be displayed.

• Marker
Tire part designated

by user can be called
to playback

from

back.

the part at which

the

• SRS TruSurround
it" a loaded disc is DVD,

• Playing an MP3 disc
You can enjoy MP3 files which are recorded
R/kW.

You can enjoy
stereo system.

stereophonic

virtual

space

on your existing

• Dimmer

on CD-

• Direct Search
You can search tire desired title, chapter, and track with
numeric button during playback or in stop mode.

Brightness

of the display

can be varied.

• Bit rate indication

• DRC (Dynamic range control)

• On-screen display
Information about the current operation can be displayed
on a TV screen, allowing you to corffirm the currently
active functions (such as program playback), on the TV
screen using the remote control.

This unit employs

TruSurround

system

TruSurround"
wSI:IS(e)o
technology.

of SRS Labs, Inc. as virtual

TruSurround
and the (_)"symbol
SRS Labs, Inc.
TruSurround
technology
from SRS Labs, Iuc.

are trademarks

is incorporated

under license

NOTE:
® We do not recommend
the use of universal
a universal remote control.

remote

controls.

Not all of the functions

may be controlled

If you decide to use a universal remote control with this unit, please be aware that the code number
may not operate this unit. In this case, please call the manufacturer
of the universal remote control.

-8-

with

given

EN
IC29

(.....
)PERA
-TV/DVD/VHS

I IN(= C()NTR()I,S

ANI)

'I LNC
li

I I )NS
..... '

FRONT PANEL - [Fig.l]
...... oooooooooooooooooo
...... oooooooooooooooo_:_o

I
......

...........

oooooo,,_,_,,_oo

TV,LVCP,buttons

ooo

3 4

- REMOTE CONTROL -

7 8910

11121314

4 15 16171819

6. OPEN/CLOSE button [DVD R371
Press to insert discs into or remove

[Fig. 2]

tray.
7. Disc loading

.........

(TVA/CR)

T[TL£

CLEAR

from the

DVD mode.

I0. TV/VCR indicator
Lights on during TV/VCR
11. CHANNEL _/V buttons
Press to select memorized

43
42
3 (DVD)

SETUp

them

Press to ch_mge to TV/VCR mode or DVD mode.
NOTE: For about 4 seconds just after the DVD
mode has switched to the TV mode, the button
does not work to switch back to the DVD mode.

11
3

tray

8. DVD indicator
Lights on during
9. SELECT button

45
44

.......

22 .................

mode.
channel.

12. Recording indicator
Flashes during recording. Lights up in the Standby mode for Timer Recording.

5
41
40
39
38

13. REC/OTR (RECORD) button [TV/VCRP.28]
Press for manual recording. Actiwfes One Tuuch
Recording.
(OTR is only (luring TV/VCR mode.)

14. REW button (for TV/VCR) [TV/VCRP.261
Press to rewind the tape, or to view the picture
rapidly in reverse during playback mode. (Rewind
Search)

36
35
34

15. FWD button (for TWVCR) [TV/VCRP.261
Press to rapidly adwmce the tape, or to view the
picture rapidly in forward during playback mode.
(Forward Search)
1. POWER

button

[TV/VCR P.I 5 / DVD P.371

Press to turn the power on and off.
2.VOLUME AFT buttons
Press to control the volume level fDrthe DVD and TV.
3.SKIP buttons (for DVD)[I?371
Skip chapters or tracks to a desired point.
4. PLAY button [TV/VCRP.26/ DVDR37]
Stals playback of the disc or tape contents.
5.STOP button [P.37]
Stops operation of the disc.

16. STOP/EJECT button [TV/VCRR2Sl
Press to stop the tape motion. Press in the Stop
mode to remove tape from the unit.
17. Remote sensor window

18. HEADPHONE jack
To connect headphone (not supplied) for personal
listening.
19. VIDEO input jack
Connect to the video output jack of a video
camera or VCR.

-9-

EN
IC29

- TV/DVD/VHS REAR PANEL - [Fig.3]

46
20. AUDIO L/R input jacks
Connect to the audio output jacks of a video

31. MODE button [DVD P.411
Activates program playback or random playback mode.

camera or VCR.

32. SEARCH MODE button [DVD R>)I
Press to locate a desired point.

21. Cassette compartment
22. PICTURE button
Press to adjust the picture.
23. Number buttons

33. AUDIO button [DVD 12441
Press to select a desired audio language
mode.
34. SUBTITLE button [DVD R451
Press to select a desired subtitle

TV Mode:[p.151
Press two digits to directly access the desired
chmmel.
Remember to press a "0" before a single digit
channel.
+100 buttonPress to select cable channels which am equal or
greater than number 100.
DVD Mode:
Press to enter the desired numbel:
+10 buttonPress to enter the desired numbers which are

35. REPEAT button [DVD R401
Repeats playback of the current
or track.

language.
disc, title, chapter

36. ANGLE button (DVD mode) [DVD R451
Press to change the camera _mgle to see the
sequence being played back from a different
37. A-B REPEAT button [DVD P.40]
Repeats playback of a selected section.
3g. RETURN button

tingle.

Returns to the previous operation.
39. ENTER button
Press to accept a setting.
40. Arrow buttons
TVNCR Mode:
Press to select a setting mode from the menu on
the TV screen,
Press to select or adjust from a particular menu.
DVD Mode:
Use when making settings while watching the
display on a TV screen.

equal or greater than number 10.
24. PAUSE button [TV/VCRR26/ DVDR38]
Pauses the currant disc or tape operation.
25. SPEED button [TV/VCRR30]
Press to choose the desired recording
SP/SLR

or sound

speed:

26. C.RESET button [TV/VCRR28]
Press to reset counter to 0:00:00.
Press to cancel a setting of timer program. (See
page 33.)
27. DISPLAY button
TWVCR Mode:
Display the counter or the current channel number
and current time on the TV screen,
DVD Mode:[R431
Displays the current status on the TV screen for
checking purposes.

41. DiSC MENU button [DVD R371
Displays the menus in the DVD.

42. ZOOM Button [DVDR421
Enlarges part of a DVD-reproduced
43. MUTE button

image.

Mutes the sound. Press it again to resume sound.
44. SLEEP button [TV/VCRR341
Sets the Sleep Timel: (See page 34,)
45. SELECT button
Press to switch TV/VCR and DVD mode. You c_m
see the mode (TV/VCR or DVD) on the front
panel indicator.

28. SETUP button [TV/VCRRI5]
Press to enter or exit the TV menu or DVD setup
mode.
29. TITLE button [DVD R371
Displays the title menu.
30. CLEAR button
Resets a setting.

EN
IC29

46. ANT. in jack
Connect to an mltenna, cable system, or satellite
system.
47. Power cord
Com_ect to a stmadard AC outlet (120V/60Hz).
NOTE: Remove the power cord from the hook to
avoid breaking a wire before you connect
to a standard AC outlet.

48. COAXIAL digital audio out jack
Connect to the digital input of gm external
amplifier or decoder.
49. AUDIO L/R output jack
Connect to the analog audio
amplifier or decoder.

PRLPARA[[(}N
i¸_

m _

)R [!SE
_

input of an external

-"_

VHF/UHF Antenna
(Not supplied)

Satellite Box or
Cable Box (Not supplied)

VHF Antenna (Not supplied)
From Cable System or
Satellite Dish

,omOab,e
Coax,a,

System Cable

piled)

tNot
sup-

UHF Antenna
(Not supplied)

I HI "-VHF/UHF

Combiner
(Not supplied)

75-ohm Coaxial

Cab,e
.ot

°'1

[Fig. 4]
Flat twin-lead cable

In some areas it will be necessary to use an outdoor
autenna.

<(<,i

" L

> /%6:':7
;;
......(7/?.,
`_ %'A;)g'
¢ _AUDIO INPUT jack

[Fig. 7]
NOTES:
,, The audio source on a disc in a 5.1 channel Dolby Digital surround format c_mnot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting tmother component.
,, Refer to tile Owner's Mmmals for tile components to be connected to the TV/DVD/VHS.
® Set Dolby Digital and DTS to OFF for audio output in the setup mode. Playing a TV/DVD/VHS using
incorrect settings may generate noise distortion, and may also damage tile speakers.
® When Dolby Digital is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you
select the audio source in a 5.1 chgmnel Dolby Digital surround format, the audio will be muted.

- 13 -

EN
IC29

If using this TV/DVD/VHS to play back a TV/DVD/VHS in a 5.1 channel Dolby Digital surround, DTS surround, or MPEG surround format, the TV/DVD/VHS outputs a Dolby Digital, DTS, or MPEG data stream
from its COAXIAL DIGITAL AUDIO OUT jack. By hooking the player up to a Dolby Digital or DTS
decoder, you can enjoy a morn convincing, realistic ambience with powerful and high-quality surround sound
of a professional standard such as can be heard in movie theaters.
Use an audio coaxial digital cables (not included) for the audio connections.

Center
speaker
_
I o @1

Front speaker
(left)

Front speaker
(right)

Dolby Digital
or DTS decoder
.....................
l
_

I_.
_

_'_
_"_

_l_

AUDIO INPUT jack

Surround

speaker
(right)

{

--Surround'l,

To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack

('enter

speaker
(left)

To COAXIAL DIGITAL

Center

MPEG (left) MPEG (right)

,,,,,,,,
,_r

speaker
ID,,,.

speaker t_.1

[Fig.81

NOTES:
® Be sure to turn off the power to all components in the system before connecting _mother component.
,, Refer to the Owner's Manuals for the components to be connected to the TV/DVD/VHS.
* If output Dolby Digital audio, connect to a Dolby Digital decoder, _md set Dolby Digital to on for audio
output in the setup mode.
o If output DTS audio, connect to a DTS decoder, and set DTS to ON for audio output in the setup mode.
* If played a disc indicated MPEG audio, connect to a MPEG decoder, _md set MPEG to ON for audio output
in the setup mode.
® Unless connected to a Dolby Digital decoder, a DTS decoder, or a MPEG decoder, set Dolby Digital, DTS,
or MPEG to off for audio output in the setup mode. Playing a TV/DVD/VHS using incorrect settings may
generate noise distortion, and may also damage the speakers.
,, When Dolby Digital is set to OFF and VIRTUAL 3D to ON for audio output in the setup mode and you
select the audio source in a 5.1 ch_mnel Dolby Digital surround format, the audio will be muted.

Manufactured,under
i!icense from Dolby
Laberatories:
Dolby and thedouNe;D
Sym,
bol are trademarks of Dolby Laboratories.

DTS and DTS Digital Out are trademarks of
Digital Theater Systems, Inc.

- 14 -

EN
IC29

You can program the tuner to scan all the channels you
NOTE: Channel memo U programming is NOT needed
select the TV/DVD/VHS chmmel selector to the output
Then select the channel to be viewed on the Cable Box

lug

[_ e

The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you can
add the deleted channel into the memory again.)

'_'Vi}V[)!VP _ powe c>d

Plug the TV/DVD/VHS power cord
into a standard AC outlet.
NOTE:

f 9elec
CI. AI, NELSET UP'
Press the SETUP button on the
letnote control.

* If some digits appear in the corner of
the screen, press the POWER button
without unplugging the power cord.
2

Press the Arrow _ or _ button to
point to "CHANNEL SET UP".
Then, press the Arrow I1_ button.

_" _e $V/DVS/W S

Press the POWER buttoll to turn on the TV/DVD/VHS.
,,,_ 9e/_s,cI

EDGLISI ool

receive in your area.
when connected to a cable box or satellite box. Just
channel of the cable box or satellite box (Ex CH3).
or Satellite Box.

ESsANO{Y ®'

Press the

gsP}

Arrow

'_;:

_, or

X;/'°"

TV,VCR

CHANNEL
V OHIO

Select "ENGLISH" or
"ESPAl'qOL"=Spanish or
"FRAN(,TAIS" =French using the
Arrow D,_ or _II button. 'I 1" indicate the selected language.
4@Be@'i sue R_eset
Press the Arrow _. or V button to
point to "AUTO PRESET".
Then press the Arrow D,_ button.
Tile tuner scans and memorizes all
active channels in your area.
NOTES:

LANGUAGE
[ENGLISH] ESO

[ENGUSH]
[OFF]

ZERORETUn_
'"0EX_EA_O"
TIME

¢',,_

button

ADDDELETECH{TV/
PRESET

FRA

AUTO PRESET

,.'H_:1%edesled

LANGUAGE
[ENGLISH]

AUTO

ESP

ol'_al_r

lll_s%q)e

Press the Arrow _, or V button until_"
your desired channel number
|
appears. (You can also use the num-/
ber buttons or the CHANNEL A/_ |
button to enter it) (Example: CHS) L

FRA

PRESET

0_
......0.....

_SETUP

,, If you wgmtto play or record a video tape
BEFORE presetting the tuner, you must press the
SETUP button on the remote control. To preset the
tuner again, see "CHANNEL SET UP AGAIN" on
page 16.
• The TV/DVD/VHS may memorize TV channels as
CATV chmmels if reception conditions is pooc If
this happens, nT AUTO MEMO action again when
reception conditions are bette_:
0_e

_.........

point to "ADD/DELETE CH".
Press the Arrow I_ button.

• The TV/DVD/VHS distinguishes between standard
TV channels and cable channels.

P'=

SET

LANGUAGE
CAPTION

AUTO

- SET up

SfTUP

"_E_sE=,,O_OO=A_M
USERS
SET
UP

The tuner stops on the lowest memorized channel.
If you want to recall the selected channels, you can
select the desired channel directly with the remote
control number buttons or CHANNEL at, or T.

Delete

(el _ add}

t fern

(it 1o} >crecy

Press the Arrow _ or _ button. Tile charnel number
changes to light red. The ch_mnel is deleted from
memory.
® To delete mlother channel, repem steps [3] and [41.
,, If you press the Arrow _ or "_ button again, the
channel is memorized again.
i_ /!_}: tf_e ct<_n/,_e

set_Ap

_'<:,de

Added channel: Light blue,
Deleted channel: Light red.
Press the SETUP button on the remote control to
returns to TV mode.
NOTE: To confirm that chgmnel(s) has been deleted
or added, press the CHANNEL _, or V button.

- 15 -

EN
I C?O

NOTE: If Spgufish or French is selected accidentally,
press the SETUP button on the remote control, press
the Arrow _ button to point to "IDIOMA
[ESPAlqOLI" or "LANGAGE" [FRAN(;AIS], then
press the Arrow _'_ button, then press the SETUP
button on the remote control.

Make sure ...
,, Press tile POWER button to turn on the
TV/DVD/VHS.
Seec
C}, ANNEL SET UP
Press the SETUP button on the
remote control.
Press the Arrow _. or V button to
point to "CHANNEL SET UP".
Then, press tile Arrow- _ button.

TV'VCR

USERS
V CHIP

Select this feature and the TV/DVD/VHS's clock
automatically will advance one hour in April, then
reverse one hour in Octobm:

SET UP
SET UP

LANGUAGE O _ENGUSH
CAPTOR
F
ZERO
RETURN
TIME SEARCH
INDEX SEARCH

CHANNEL

Press the Arrow at or V button to
point to "AUTO PRESET".
Then, press the Arrow _ button.
The tuner scans and memorizes all

SETUP

TIMER PROGRAMMING
SETTING
CLOCK
CHANNEL
SET UP

ADD,
AUTO

DELETE
PRESET

SET

(TV)

When Daylight-Saving Time is ON, the clock will
change automatically as follows:
• First Sunday of April : At 2 AM tlle clock immediately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
_,Last Sunday of October : At 2 AM tile clock
immediately changes to 1 AM.
Make sure ...
,, Press the POWER button to turn on the
TV/DVD/VHS.

the active channels in your area.

The tuner stops on the lowest memorized channel.
TV/VOn

Press tlle SETUP button on the
remote

NOTE: This function effects only the language on
the screen menu and not tile audio source.

2 Select'ENGUSW'

TV/VCR
TIMER

,,:_:;

CLOCK
SET UP

, ,,,,,mk_
%_t,,.,,_:,_
r g7

LANGUAGE
[ENGLISH]
CAPTION
[OFF]
ZERORETURN
TIME SEARCH

'NOE×_EARCH

, o O/']

point to "D.S.T.".
A0_oo_oo_
rON_
Then, press the Arrow _,_or _'_ butAO_OOLOO_OH
rA_O_
Press the Arrow _ o1"_" button to [,. _ET'I"GCLO0_
]
ton until tONI appears.
DST ......
iON]

SETUP

PROGRAMMING

SETTING
CLOCK
CHANNEL
SET UP
USERS
SET UP
v CHIP SET U_
LANGUAGE
[ENGLISH]
CAPTION
[OF]
ZERO
RETURN
TIME SEARCH
INDEX SEARCH

SETUP

PROGRAMM}NG

SETTING
CHANNEL

vUSERScHIP
sETSET
upUP

Press tile Arrow A or V button to
point to "SETTING CLOCK".
Then, press tile Arrow I_- button.

Make sure ...
,, Press the POWER button to turn on tile
TV/DVD/VHS.

"f Seee
LANGUA<;};!
Press tlle SETUP button on the
remote control.
Press the Arrow A or T button to
point to "LANGUAGE".

control

TIMER

MANUAL

....

CLOCK

SET

3 Ext the ©ay @'_t,.Sav_6,_
7et
on

the

g
remote

control

_ Tu/_, ofl the TV/DV[}/V_4S
im-n the TV/DVD/VHS oK Because the Auto Clock
functions automatically while the TV/DVD/VHS is
off.

m.)
NOTES:
* Auto clock setting only needs to be set once. But it
can be done again if the clock's time has become
incorrect for some reason.
- If the TV/DVD/VHS is connected directly to a
cable converter box or satellite box, the local PBS
station must be selected on the cable box itself, and
the TV/DVD/VHS must be set to the output channel of the cable conveller box or satellite box (usually channel 3 or 4), to be able to set up or correct
the clock automatically.
If you do not Mlow what your local PBS station is,
then follow "Manual Clock Settings" on page 18.
The TV/DVD/VHS cannot control the ch_mnels of
the cable converter box or satellite box.
'J' Seec SET'rNGO,OCK
Press the SETUP button on the
remote

control,

Press the Arrow A or V button to
point to "SETTING CLOCK".
Then, press the Arrow _ button.

TV,VOR
TIMER

If you choose [AUTO],
* the TV/DVD/VHS must search until the PBS channel is found. It must scan each channel for a couple
of seconds to determine if that channel is transmittins the XDS signal.
* if the time, thai is automatically set by this selected
PBS station is incorrect, it may not be your local
PBS station, but one from a different time zone. Or
there is a case that no channel is broadcasting the
XDS signal in your area, as shown by no time. In
these cases, you must mzmually enter the correct
local PBS station, or set the clock manually and
turn off the Auto Clock Setting feature.

SETUP

PROGRAMMING

, SETT'NOC_OOK
CHANNEL

SET

vUSERScHIP
sETSET
upUP
LANGUAGE
CAPTION

[ENGLISH]
OFF]

ZERORET_RN
TIME SEARCH
INDEX SEARCH

- 17 -

EN
IC29

_ ¸'_ _¸

%,_,'x

s _¸¸,_

_ _

Make sure ...

In the example below, the clock is to be set to:
DATE
May 7th, 2002
SETTING TIME
5:40PM

® TV/DVD/VHS power must be turned on.

'f S ec SETTtr,£}_CLO©K
Press tlle SETUP button on the
remote control.
Press the Arrow _, or V button to
point to "SETTING CLOCK".
Then, press the Arrow _ button.

TV'VCR

SETUP

TIMER
PROGRAMMING
SETTING
CLOCK
CHANNEL
SET UP
USERS
V CHIP

5_}ect

SET UP
SET UP

LANGUAGE
[ENGLISH]
CAPTION
OFF]
ZERO
RET/(JRN
TIME SEARCH
INDEX SEARCH

_,L5

2 Seect }_/IA_,SUAL
CLOCf<
SET'
Press the Arrow A or T button to
point to "MANUAL CLOCK SET".
Then, press the Arrow _ button.

SETTFNG

AUTO

CLOCK

AUTO

CLOCK

,* ,,

............

Press the Arrow _. or V button until
your desired month appears.
(Example: May --+ 05)
Then, press the Arrow _ button.

S@@Ct

tI's_@

day

Press the Arrow _, or V button until
your desired day appears,
(Example: 7th --+ (17)
Then, press the Arrow _ button.
;5 See(
yea_"
Press the Arrow _, or _ button until
your desired year appears.
(Example: 2002)
Then, press the Arrow _ button.

"io,;;r

[

...............

,,*

MANUALCLOCKSET

CLOCK

the desired minute appears,
(Example:
4(I) _, or V button untill
Press
the Arrow

[ON]
OH

[AUTO]

o..... T_E....
....
,_NT_
0A¥ YEAR
0s u.....

MANUALCLOOKSET
DST

IOFF]

{} Sts_t

Press the Arrow _, or V button until| NIONTH DAY
YEAR
your desired hour appears.
| ..... or TUE....
(Example: 5, PM)
| ..........
Then, press the Arrow _ button,
k "_:_::

MANUAL

CLOCK

Press the SETUP button on the
remote control.

SET

............

CLOOR

.... PM]

Although seconds are not displayed,
they begin counting from 00 when
you press the SETUP button on the
remote control. Use this feature to synchronize the
clock with the correct time.
NOTE:

MoNT_
OA¥ _A_

MANUAL

t/_e cock

SET

When unplugging the AC cord or if there is a power
MONT_
0AY YEAR failure for mole than 30 seconds, you may have to
o_CV:
reset the clock.
............

'F¢?
MANUAL

CLOCK

C£()K £

If you wtmt to change the clock,
1)Follow steps t11 trod [2].
2)Select where you want to change using the Arrow
or "_1button.

SET

MO_T_
_A_ _E_R
0s . 07
* i
...........

3)Enter correct numbers using the Arrow _, or T
button.
4)Press the SETUP button on the remote control to
start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" grad
press the Arrow _ or "_ button to turn [OFFI this
function. Then you can manually adjust the clock.

EN
IC29

FV OPERATION

"7 _'_ _or

Press tile POWER
TV/DVD/VHS.

Seect

The TV/DVD/VHS's picture controls - BRIGHT,
CONTRAST, COLOR, TINT and SHARPNESS are preset to factory specifications. Although they are
usually the best, you may need to make some further
adjustments for a natural looking image.
NOTES:
+ Procedures must be followed within 5 seconds or
the Picture Control mode will be cancelled.

be_VOVD!VHS
button to turn on the

the csa_ se _su_be

Press the CHANNEL _ or V button to select your
desired charnel number or press the number buttons
on the remote control.
Remember: If the TV/DVD/VHS is connected to a
cable box or smelJite box, the TV/DVD/VHS must be
on CH3 or CH4, then the channel to be viewed must
be selected on the cable box or satellite box+

• When setting the Picture Control, the Game mode
will be cancelled.
Make sure ...
* TV/DVD/VHS power must be turned on.
>eec_ P ( T,}[qE
Press the PICTURE button on the remote control.

+_ Ad/us s>_'+d
Press the VOLUME A or V button
to adjust the volume.
VOLUME

H|||mml

NOTES:
+ If you press the CHANNEL _ or vin the DVD
mode, you can change the TV chmmels.
Even if you turn off the TV/DVD/VHS in the DVD
mode, when you turn it on again, it will go into the
TV/VCR mode.

2 9+ect i e+_,'+>u >a-;l: <:_at: ust
Press the Arrow _, or T button until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
................
SHARPNESS
BRIGHT

3 A: +++;++
+be p <'.,_'e oor+bo+
Magnetism
from nearby
color of the TV picture.

appliances

might affect the

Press

the Arrow

(71"<_ button

to adjust

to your

desired level.

If this happens, move this unit away from the appliance. If the color is still not correct, disconnect power
cord from AC outlet then reconnect it after 30 minutes.

Arrow _l
to decrease
brightness
to decrease
contrast

Arrow
to increase
brightness
to increase
contrast

COLOR

to pale

to brilliant

TINT
SHARPNESS

to purple
to soft

to green
to clear

BRIGHT
CONTRAST

+ If there is a power failure of any kind, the unit will
retain its memory for this feature.

- 19 -

EN
IC29

Fele;_ CA>7 ON
Press the SETUP button on the
remote control,

You can view specially labeled (co) TV programs,
movies, news, pre-recorded
tapes with either a dialogue caption or text display.

TEXT mode: By choosing the text mode, you can
watch half screen text information
if you w_mt.

NOTE:
Not all programs are bloadcast with closed captions.
Your television is designed to provide error free
closed captions from high quality tmtenna, cable mid
VCR signals. Conversely, poor quality signals are
likely to result in caption errors or no captions at all.
Common signal conditions which may cause captions
errors are listed below:

If the TV/DVD/VHS displays a
black box on the TV screen, this
means that the TV/DVD/VHS is set
to the TEXT mode. To clear semen,
select [CAPTIONI 1, [CAPTION2]
or [OFFI.
Make sure ...

USERS

yeu_ des _ed espt

SET

CAPTION lOaF1....

ZERORE'_"
'"DEXSEARCH
TIME

o/s me'_u

Press tile Arrow _ or "_ button
until your desired caption menu
appears,
([CAPTION II, [CAPTION21,
[TEXT11 or [TEXT2])

1-2: You may get these captions or text information
by selecting either "1" or "2". Caption "2" is used,
usually for a second language if available.

,, Weak snowy reception on TV screen
® Multiplex signal reception displaying picture
ghosts or airplane flutter.
* Playback of poorly recorded or worn VCR tapes.
NOTE:

Seect

PRO@RAMMING

CHANNEL

Press the Arrow A or 'V button to
point to "CAPTION".

CAPTION mode: By choosing the caption mode, you
can watch dramas, movies mid news while captioning
the dialogues grad the contents of news.

* Automobile ignition noise
* Electric motor brush noise

T","OR
SeuP
SErT,NOOLOCK
vCHIP
SET
UP
LANGUAG {E_:_LISH]
TIMER

Tv,vc_sE,u_
OHANN_SE_U_
vCH,P
s__p
CAPTION dC_PTIONI]
_............
TIMER PROGRAMMING
SETTING
USERS

CLOCK

SET

LANGUAGE

gEN{3LI

TIME SEARCH
INDEX SEARCH

,(_i_
Ext the espt o_ sett _g mode
Press the SETUP button on the remote control to
return to TV mode.

T(){%/<:
y

[VIEW

TV Y7 (
TvTVGPG(

)
)

VIEW
[VIEW]

T%14

)

{VIEW]

(

T%bfA()

TV G
TV Y7
.....

(

)
DLSV)

TV.....MA{DLSVJLsV)

[VIEW]
1t
[
....
VIEW
BLOCK
[BLOOK_{
[BLOCK]/

llIeuu.

ilS"(Sexual
Situation),
or the
V"(Violence).
Then, press
[
Arrow _ button to select
[BLOCKI or [VIEW].
Note: When you select [TV-MAI, "D" does not

TV RATING
CHANGE

Press t I_eArrow 'V or at button to (
select D"(Suggestive Dialog),
| ....
"L '(Coarse Language),
1'+_

hlg category

Press the Arrow A or V button to
point to your desired item.
Then, press the Arrow- _ button to
select [BLOCKI or [VIEWI.

ACCESS
CODE

digit access code. The default code
is 0000.

,3 Select 7°VRA'rlb_G'
Press tile Arrow A or 'V button to
point to "TV RATING".
Then, press the Arrow- _ button.

Parental Gui&mce suggested.
Unsuitable for children under 14

Press tile Arrow '!v or _, button to /
,0LOO_,
select FV (Fantas 3 Violence). ]'
+ When
you select
[TV-Y7]:
Then, press
the Arrow
_ button ((
|
to select [BLOCKI or [VIEWl.
,, When you select [TV-PG], [TV-14] or [TV-MA]:

RETURN

TIMESEAROH
INDEX

TV-PG
TV- 14

To set the
below-.

PROGRAMMING

SETTING

Rating Category Explanations
Appropriate for all children
Appropriate for children seven _mdolder
General Audience

When you select TV-Y7, TV-PG, TV- 14, or TV-MA
and you press the Arrow _- button, the sub-ratings
will appear on the TV screen.
If you select tile rating category (example: TV-PG)
_md turn it [BLOCKI or [VIEWI, the sub-rathlgs
(example: V for Violence) will turn [BLOCKI or
[VIEWI automatically.
You can set the sub-ratings to [BLOCKI or [VIEWI
individually when the rating category is set to
[BLOCKI.

Make sure ...
® TV/DVD/VHS

Selection
TV-Y
TV-Y7
TV-G

]

{VIEW]

_; E×t the'VChp
set+
Press tile SETUP button on the remote
return to original

control to

mode.

EN
IC29

M:_4A

£ _'_i_

"¸__ .........

} H,¢ i_,{;,h74 L'('.'£SS

Make sure ...

To change

access code, follow

the steps.

• TV/DVD/VHS power must be turned on.
"£ Se_sc_ '_,Cf P SF/} UF
TV/VCR

Press the SETUP

button on the

SETTING

remote

control.

CLOCK

V CHIP

Then, press the Arrow

SET

LANGUAGE
CAPTION

UP
IENGLIBH]
OFF]

ZEIqORET[_RN
TV,VOR
INDEX SEARCH
TIMESEARCH

Press the Arrow A or T button to
point t( V-CHIP SET UP . Then,
press the Arrow D_ button.

D_ button.

ACCESS

Use the number

code. The default

;_'i:S_/:;÷;t MV;_A

TIME SEARCH
INDEX SEARCH

code

v0,,PsE_u_
MPAARAT'NG
CHANGE

CODE

v CHIP

Press the Arrow _ or T button to
point to "CHANGE CODE".
press the Arrow D_ button.

Rating Category
General Audience

PG
PG- 13

Parental Guidance suggested.
Unsuitable for children under 13

R
NC-17

Restricted; under 17 requires accompanying parent or adult guardian
No one under 17 admitted

Mature audience only

you_:"@:s_:d

NEW

tern
|
[VlEN

item.

[',_'_B_

BLOCK
[BLOCK]

CODE

your desired access code in the
NEW CODE space. Then enter the
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screen.
• If you enter wrong code, repeat
step 5, making sure you enter the
same new code exactly in the
confirm code space.

CONFIRM

NEW

CODE

CONFIRM

CODE

_g_3

[BLOCK]j

When you select the rating category and turn it [BLOCKI, the higher rating will
turn [BLOCKI automatically.
Also, the lower rating will turn [VIEWI automatically.
® When you turn °°G" to [VIEWI, the all ratings will
turn to [VIEWI automatically.
s:;"

IdPAARATING
CHANGE
CODE

Then,

Use the number buttons to enter

button to

Then, press the Arrow D_ button to
select [BLOCKI or [VIEWI.

Explanations

_, or _

SET

TV RATING

Selection
G

point to your desired

CODE

buttons to erlter 4-

TV RATING

point to "MPAA RATING".
Then, press the Arrow D_ button.

[ENGUSH]

CAPTION
OFF]
ZERO RETURN

ACCESS

code

Press the Arrow _, or V button to

{1'__::x tr÷

LANGUAGE

CODE

Use the number

Press the Arrow

SETUP

TIMER
PROGRAMMING
SETTING
CLOCK
CHANNEL
SET UP
USERS
SET UP
V CHIP SET UP

buttons to enter 4-

digit access code. The default
is 0000.

/_ Seec

SETUP

CHANNELusERS
sETSETupUP

Press the Arrow A or V button to
point to "V-CHIP SET UP".

digit access
is 0000.

Press the SETUP button so that the TV/VCR
display appears on the TV screen.

SETUP

TIMER PROGRAMMING

Press the SETUP button to exit the TV/VCR SETUR
Note:
If you unplug the power code or power failure
occures, the changed access code will be lost and
will return to default (0000). Ch_mge your access
code again as necessary.

,::: ",:",'>

Press the SETUP button on the remote control to
return tn origh'lal mode.

- 22 -

EN
IC29

"9 "3

You cgm record or listen to a program in MTS stereo.

When you play a VHS tape, or receive a broadcast
on the TV/DVD/VHS tuner channel you are watching,
the status shown below will appear when you press
the DISPLAY button on the remote control.

PLAY I_

4]m

12:00AM

•HIFI

CH 123

screerl,

31
m2]
ml]

SAP

Second
program,
language

HIFI

COUNT

Audio

Regular
(monaural audio)
Stereo broadcast
Bilingual broadcast

which means

your

can also be received in a second
or sometimes
a radio station.

High Fidelity
than standard

Type of broadcast

0:00:00

Program,

II When a program is broadcast in stereo, STEREO
appears on the TV screen.
2] When a program is broadcast in second audio,
SAP appears on the TV screen.
3] When a program broadcast both in stereo m_d second audio, STEREO _md SAP appear on the TV

which produces better
stereo TV/DVD/VHSs.

sound

Display on
the TV screen
-None-

STEREO/SAP
SELECTION
-Invalid-

STERE()

-Invalid-

SAP

STERE()*

NOTE: Although a program may be broadcast in
both stereo grad second audio, you ctumot
record in both stereo and second audio at
the same time.
41 While the TV/DVD/VHS is set in HIFI stereo
mode _md playback mode. HIFI appears on the
TV screen. While the TV/DVD/VHS is set in
monaural(MONO) mode, HIFI disappears from
the TV screen.
NOTE: If you play non-HIF[ tapes while the
TV/DVD/VHS is set in HIFI, HIFI will disappear from the TV screen and the
TV/DVD/VHS will play autommically in
monaural.

Hi-Fi

SAP*
Stereo & Bilingual
broadcast

STERE()
SAP

audio track(2-channel)

L-channel

STERE()*
SAP*

Normal

audio

R-channel

track

Mono

L
Main audio
program
Sub audio
program
L
sub audio
program

R
Main audio
program
Sub audio
program
R
sub audio
program

L+R
Main audio
program
Sub audio
program
L+R
sub audio
program

*You must select the recording mode in TV AUDIO [STEREOI or [SAPI when you record a broadcast.

- 23 -

EN
IC29

70 SELEC? i

Make sure ...
® TV/DVD/VHS power must be turned on.

?Y} S/T ,:_C7

TIMER

1) Press the SETUP button on the remote control.
Press the Arrow A or V button to point to
"USER'S SET UP".Then, press the Arrow
button.

PROGRAMMING

SETTING CLOCK
CHANNEL
SET UP
USERS

reHiote

You can chgmge the selection to "MONO" if you
want to listen to HIFI tapes in normal audio playback.

#_Y:'I MOD,h/

Press the SETUP button on the
corltrol,

Press the Arrow A or V button to
point to "USER'S SET UP". Then
press the Arrow _button.

OAO

SET UP

V CHIP SET UP
LANGUAGE
ENGUSH
CAPT ON
O#F
ZERORETURN
TIME SEARCH

2) Press the Arrow _, or T button to point to
"VCR AUDIO". Then, press Arrow _button.
3) Press the Arrow _ or _1 button until [MONO]
appears.
2 %e"ec,V<; s_AJDO'
,!
USERSSErUP
1
4) Press the SETUP button on the remote control to
return to TV mode.
Press the Arrow _, or V button to [ ......
]
point to VCR AUDIO". Then, press[ 2_
I_1
the Arrow _button.
T¢}_,$S].£<' } }_77;£E0, ,%i/_',0£ MO/_

s aybsck

[

/
f sron

Press the STOP button when pitt},- [
back is completed.

NOTES:
® If you press the TV/VCR side PLAY button in tile
DVD mode, you can start the VCR playback.
" If you press the SELECT button in the VCR
playback, it will stop and the mode will
change to the DVD mode. In addition, the
same function operates with the DVD side
PLAY button or OPEN/CLOSE
button.

• Tracking adjustment will be set automatically
(Digital Tracking function) when you stai_,playback.
• However when playing pre-mcorded tapes or tapes
recorded on units other thtm your own, noise lines
(black wld white streaks) may appear on the playback picture. If this occurs, you can adjust the
tracking control manually by pressing the CHANNEL • , or T button until the streaks disappear. To
return to the DTR function, stop the tape once and
start playback again.
• You ctm reduce the noise lines by pressing the
CHANNEL _, or _" button in slow mode, too.
Tracking adjustment in Slow mode will not be set
automatically.
NOTE:

During pause, press the FWD button to reduce file
playback speed. The TV/DVD/VHS mutes the sound
during slow motion. Press the PLAY button to return
to normal playback.
NOTE: If it is left in the Slow mode for more than
five minutes, the TV/DVD/VHS will automatically
go into the Stop mode.

This feature is veU useful in finding or skipping over
a particular scene on a tape. In this mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the EFWD or REW button. (in the SP / LP / SLP
modes)
NOTE:
"If you press the F.FWD or REW button on the
front pmlel in the DVD mode, the VCR forward
or reverse will start. Please press the STOP /
EJECT button once to stop it, twice to eiect it.
2)Press it again and the TV/DVD/VHS will now
search in super high speed. (in the LP / SLP modes
only)
NOTE:
,, Tapes recorded in the SP or LP mode will display a noise bar on the TV screen and the picture
may revert to Black wld White. This is normal.
3)Press the PLAY button to return to normal speed.

You can view a still picture on file TV screen during
playback (the Still mode). Press the PAUSE button
during playback. Only tapes recorded in the SLP
mode will show the least amount of lines.Press the
PLAY button to return to playback.
NOTES:
,, You ctm advance the picture one frame tit a time by
pressing the PAUSE button during the Still mode.
® If it is left in the Pause mode for more than live
minutes, the TV/DVD/VHS will automatically
switch to the Stop mode.

In the Pause/Still mode only, when the picture begins
to vibrate vertically, stabilize the picture by pressing
the CHANNEL A or V button.
NOTE:

® In Still mode, press the SLOW button and press the
CHANNEL A or V button until streaks disappear.
To return to Still mode, press the PAUSE button
If there are video noise lines on the screen, see Tracking
again.
Adjustment section.
- 26 EN
IC29

PI.AYBA( B

SPE( IAL
Make sure ...
• TV/DVD/VHS
power must be turned on.
• lnsel a prerecorded
tape.
• Before

playback,

The TV/DVD/VHS
has the auto repeat function
allows you to repeat a tape indefinitely
without
touching the PLAY button.

steps below.

ALl_ REPEAT: Repeat playback
to the end of the tape.
This function enables
quality when playing
rented tapes.

(i t;_ '¢

//l

Press the SETUP
remote

/';

;;)IZ

control,

CHANNEL SET UP
USERS

Press the Arrow A <,1V button to
point to "USER'S
SET UP".
Then, press the Arrow _

T""CRSETUP

TIMER
PROGRAMMING
SETTING
CLOCK

V CHIP

SET

{[ Ex£ the -_e ta se ti',_g
Press the SETUP button on the remote
return to the TV mode.

"_ Select L:SD':iIS SIT UP
Press the SETUP button on the
remote control.

TIMER
PROGRAMMFNG
SETTING
CLOCK
CHANNEL
SET UP
USERS
SET UP
V CHIP SET UP

LANOOAGE
_ENGUSH_ Press the Arrow A or T button to
CAPTION
OFF]
ZERO RET_RN
INDEX

point to "USER'S SET UP".
Then, press the Arrow _ button.

T'MESEARCH

button.

2 Set RENTAL' to [ON}
Press the Arrow A or V button to
point to "RENTAL".
Press the Arrow _ or -_ button
until TONI appears.

from the beginning

BLANK REPEAT: Repeat playback from the beginning to a blank pal, which is blank for more than
10 seconds.

you to improve the picture
back worn cassettes such as

button on the

that

LANGUAGE o _-NGLISH
CAPTOR
F
ZERO RETURN
TV'VOR
SETUP
TIME SEARCH
INDEX

.............. ALL2 o_ BLAHK
RENTAL
REPEAT

..... {ON .....
[0_-t _

PLAY

..........

bA
OFF

VCR AUDIO
TV AUDIO
USERS

SET

UP[STEREO]

point to "REPEAT

PLAY".

REPEATREN_A_PLA_
........
>_L_
....

Press the Arrow _ (,1 _,_ button
_oRAuo,oil;qil
Press the Arrow _. (,1"V button to
[,.
.... ...... ,,o_: -'
repeatedly until your desired selec[STEREOIj
tion [ALLI (,1 [BLANKI appears.
TV AUDIO

control to

,;_ {:ixil tb® ReS;e;:? Pliay *:,t ";
Press the SETUP button on the remote
return to the TV mode.

control to

/_ Sta_'t playback
Press the PLAY button to start playback. "RENTAL
PLAY _" appears.
,, Once you select the Rental mode, it stays in effect
even after you turn off the TV/DVD/VHS.

7'(): (_AN(:71, } ?" :'i' A_ki'?,_7;4 . _:ODD/
Repeat steps [ll and [2], select [OFFI using the
Arrow II_ or _ button on the remote control. Press
the SETUP button on the remote control to return to
TV mode.
If there is a power failure of any kind, the unit
will retain its memory l_r this feature.

_g Start p/a back
Press the PLAY bulon to start the Repeat Play.
"REPEAT PLAY _" appears.
* Once you select the Repeat Play mode, it stays in
effect even after you turn off the TV/DVD/VHS.
,, If the Rental mode is set TONI, the "RENTAL
PLAY I_" display has priority.

]l,y): 11°47,,I{7£L T: :I _££_:5¢

:%¢

MODE

Repem steps [11 and [2], select [OFFI using the
Arrow _ or _1 button on the remote control. Press
the SETUP button on the remote control to return to
TV mode.
If there is a power failure of any kind, the unit
will retain its memory lbr this feature.

- 27 -

EN
IC29

Make sure ...
* TV/DVD/VHS power must be turned on.
* Insert a tape.
® This function will not operate in recording mode.
,, This function is not operative when a cassette tape
is not inserted in the TV/DVD/VHS.

This function allows you to search easily a beginning
point that you want to review by rewinding or fast
forwarding.
NOTE:

In the example below: To watch a program after 2
hour 50 minutes from the present position, in either
direction.

Zero Return WILL NOT work on a blank tape or a
blmlk portion of a tape.

}P rise'
2

Rewind or fast forward the tape to the beginning
point at which you wmlt to review-.

a {ape.

S@+®c+ T_sSE SEAB©'£

sod®

Press the SETUP button on the
remote control.

+v,',,oRsE+uP
SETTING
CLOCK
TIMER

PROGRAMMING

CHANNEL

Press the COUNTER RESET button repeatedly.

Press the Arrow A or V button to
point to "TIME SEARCH".
Then, press the Arrow I_ button+

,,_ Be{-1_ record_4_ o puybsck
Press the RECORD or PLAY button.

Press the

F{ese e

co_+'//e_"o {?@3:00

Press the STOP button when recording or playback is
completed.

control.

or W bt.ltton until

SET
SET

vo_+sETu_
ZERO_E+URN
LANGUAGE
OAPT ON
TIME

INDEX

ENGUSH
o_g

[ T+,++
s_a',cH

your desh'e(J time appears.
/ :_ ....
(Example: 2:50" stalds for 2 hours_
5(I minutes)
If you wish to cancel the Time
Search at this point, press the SETUP button on the
remote control.

z_ ;q:_actvate ZERO RE_/'UR/t mode
Press the SETUP button on the
W,_O_ETU_
remote

Arrow

USERS

SETTINGTIMER
PROGRAMMINGcLoCK
CHANNEL
SET UP
USERS
SET UP

Press the Arrow A or _" button to
VOH'PSETUP
point to "ZERO RETURN".
ZERORETURN
Then, press the Arrow _ button.
INDEX SEARCH
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.
LANGUAGE
CAPT ON
TIME

ENGLISH
O_F

_@Beg+_¢TmeSes'ch
By pressing the Arrow- "_1or I_ button, the
TV/DVD/VHS will rewind or filst forward to the
specified point.
The time counts down as the seamhing progresses.
When 0:00 is reached, the tape will start playback
automatically.

The Time Search function makes it possible to quickly adwmce the tape to your desired position simply
by entering the exact amount of playback time you
want to skip.
NOTES:

Press the STOP/EJECT button on the TV/DVD/VHS
or the remote control. This will delete the selected
time.

• Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 minutes at a time.

EN
IC29

¢7 ;'

Press the SETUP

This feature provides a method of indexing the starting point so that it can be easily returned to in either
fast forward or rewind mode.

re[note

CURRENT PLAYBACK PROGRAM
Beginning of tape

r4
3
2
INDEX MARK

_, or T but on to

point to "INDEX SEARCH
press the Arrow _button

T'MER
PROO_'NO

[

CHANNELsETSET
UPvUSERScHIP
SET
upUP

ZERoCAPTONRETuRNO#F
LANGUAGE
ENGLISH
INDEX

the number

of programs

TV,VOR
SETUP
SETTING
CLOCK

'. Then, 1,. T'MESE_ROH

Press the Arrow A or V button until(
that you

FND _£ACH

want to skip ap,pears.
(Example:
03 ' for 3 programs)
* The Index Search mode will be
canceled if the procedures are not
seconds.

[
[
[
activated

in 30

Press the Arrow _'9 or I_ button. The TV/DVD/VHS
begins rewinding or fast forwarding to the beginning
of desired program.
NOTE: Every time m, index signal is skipped, the
number in the program indicator decreases by one.

End of tape

corltrol,

Press the Arrow

® The index mark will be made automatically when
the REC button is pressed. It will also be marked at
the starting point of Timer recording and OTR.
,, The index mark will not be recorded if the PAUSE
button is pressed and released during recording.
• The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 minutes for LP recording _md 3 minutes for SLP recording.
® In some cases, the index mark at the beginning of
video tape cannot be detected.
Example: Yuu arc watching program number 4 and
w_mt to fast forward to program number 7. You
must skip three programs.

button on the

/_ Afte

_dex

S®s_@_

When the preset program
TV/DVD/VHS
will start
® A video cassette must
TV/DVD/VHS
for this
® The number

is reached, the
playback automatically.
be inserted in the
function to woN.

of Index Searches

can be set up to 2(1.

® This function will not operate in the recording mode.
® When you want to cmlcel the Index Search while
in progress, press the STOP button.

SPECiAl,

This shows the elapsed recording or playback time in
hours, minutes, grad seconds. (The displayed time will
not chgmge on a bhmk tape or bhmk portions on the
tape.)The "-" indication will appear when the tape has
rewound fresher thgm "0:00:00" on the tape countel:

FEAT{!RES

,, When the end of a tape is reached during recording, playback, or fast-forward,
the tape will automatically rewind to the beginning. After rewinding
finishes, the TV/DVD/VHS
will qiect the tape and
turn itself to off.
® This function is operative
to the [OFFI position.

when Repeat

,, The tape will not auto-rewind
ing or One Tuuch Recording.

- 29 -

Play is set

during timer record-

EN
IC29

Make sure ...
* TV/DVD/VHS power must be turned on.
o Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
NOTES:
,, This unit will ONLY record grad view the same chmmel.
® This unit cannot record the contents from the built-in DVD.

You can ONLY watch the same TV program that is
being recorded.
¢ Sect/he

csa'_ne

Press the PAUSE button to temporarily stop recording.
I _°_
Press the PAUSE or RECORD button to resume recording.

be _eco_ded

Press the number buttons on the
remote control or the CHANNEL
_, or V button.

Remember: If the TV/DVD/VHS is
connected to a cable box or satellite
box, the TV/DVD/VHS must be on CH3 or CH4,
then the channel to be recorded must be selected on
the cable box or satellite box.
2 Seg

For once recording

Press the Arrow A (up) button
until the desired date appears.
(Example: "7/06" for July 6th). Then, press the
Arrow I_ button.
For every day recording

: To record a TV program

at the same time on the same chan-(
T'UERPROGRAUU'NG
nel every day. (Example: Monday
| ............
through Sunday)
| :: :i: :;: ::: :i::
........
_@:0>:
Press the Arrow V (down) button[' ii 'i{: i i'i:ii ::
until "EVRY DAY" appears.
L
.....
Then, press tile Arrow I_ button.

- I I:00AM
- 10:00AM
- 12:00PM

Recording

Program I

[ENGLISH]

3 Set t 'e <: 's_ e rs/ >be_,'
( T'UERPROGRAUU'NG
q
Press the Arrow _. or V button until
o, DATE_l, _o

® The program with an earlier star, has priority.
® Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
,, The illustration
below demonstrates
the sequence
of recordings.
10:00AM
9:00AM
9:30AM

LANGUAGE

[81 on page 18 Then set the timer l ..........
recording.

,, hlsert a cassette tape with its erase prevention tab
in place. (If necessary, rewind or fast forward the
tape to the point at which you w_mt to begin
recording.)
• The chmmel you want to record is properly set in
advance. (See page 16.)

1
2
3

/ _E_S
o,,_sETSET
__P

appears. If so, follow stops [31 to _ _E_O_ET_"_O_

Make sure ...
• If a cable box or satellite box is connected with the
TV/DVD/VHS
you will be limited to record only
one channel.
And the channel selector on the
TV/DVD/VHS
must be selected to the output
channel of tile boxes CH 3 or CH 4 m_d then the
actual chmmel to be recorded must be selected on
the boxes.
• Clock must be set to tile correct time and date
before setting the timec
,, TV/DVD/VHS
power must be turn on to program
it.

Program
Program
Program

SET"

SETTINGTIMER
TVVOR
PROGRAMMINGcLOCK
SETUP

set to record:

DATE:
SETTING TIME:
CHANNEL:

Avoid over lap of programs
...
There is a chance that a program
ed. when programs overlap;

CLOCK

Sequ_¢o

10:O0AM-11:00AM =,
Program 2
9:00AM-10:OOAM

Program3
9:3gAM-12:ODPM {
9:00AM

10:00AM

11:00AM

For weekly recording : To recold a TV program
the same time on the same chamtel
r

12:00PM

[ &W%:,7':.;]

_Ro¢ord/og perlod Is SHADED

Mo,,d<,,)
Seec

"?J/II!:;iPprox. 80 nfin
8 cm

Audio
CD

811

c-s

J¸

Data on a DVD is divided into sections called "titles", and
then into subsections called "chapters", each of which is
given a title or chapter number. Playback conditions are
preset on some DVD video discs, and these playback conditions take priority over user operations on this player. If
a function you selected do not mn as desired, refer to the
manual accompanying
the disc.

Maximum

Disc q_vpe

E +"

e s (e()

Ap)rox.
160
(double-sided)

12 cm

74 nlin

g cm
(singles)

20 min

rain

Title 1

Title 2

This player conforms to the NTSC color system. You cannot play discs recorded in other color systems such as
PAL or SECAM.
• Some discs include region codes as shown below.

% %

eThe number inside the symbol refers to
world, and a disc encoded in a specific
can only be played back on DVD players
region code.
The following discs cannot be played
DVD playel;
• DVD with region
e DVD-ROM

codes other

[AUDIO CD]
Data on an audio CD is divided into sections
"tracks", each of which is given a track number.

. Track

L Track

21.,

Track

3j+

T,ack

4=L

Track

5LTrack 6.

on this

than 1 or ALL.
[MP3]

• DVD-RAM (Never play back, otherwise
malfunction
may result.)
*CD-ROM

Data on a MP3 is divided into sections called "albums",
and then into subsections called "tracks", each of which is
given an album or track number.

eVSO
eCDV (Only plays back the audio

part.)

eCD-G (Only plays back the sound.)
• CD-R/CD-RW
(Only plays back the discs which audio
MP3 is recorded.)
eCD-I
(Never
result.)
• SACD

Example

a region of the
region format
with the same
back

called

CD and

play back, otherwise

malfunction

may

• Photo CD
(Never play back, otherwise
result.)

malfunction

may

Any other discs without compatibility

indications

- 36 -

EN
01All

TurnonthepoweroftheTV,amplifierandtulyother
components
whichareconnected
totheDVDplayel:
(Change
tileinputsystem
to suittileDVDplayer,
and
checkthatthesoundvolumeiscorrect.)

• If a disc is dhly or has scratches, the pictures may
appear distorted and tile playback operation may
stop. In such cases, cletm the disc and unplug the
power cord guld then plug it again before resuming
playback.
o With DVDs that use some titles for playback
program signals, playback may start from the second
title, or it may skip these titles.
®During the playback of two layered disc, pictures
may stop for a moment. This happens when tile 1st
layer switches to the 2nd layer. This is not a malffmcfion.

• Thepowerwillturnon.
• Thediscloadingtraywill open.
5

Pu_ceadsc

_o_he_s>

• Make sure the disc is sitting properly
recess, with the label side up.

in the correct

Some DVDs contain their own menus, such as a
guidance menu which describes the contents of the
disc or a selection menu for sound, language and other
customized settings.

®The DVD menu will appear.
2

Se®ctth®5®ss

edtte,

• Press the arrow buttons (V/A./I_/_I)
to chalge
setting, and theri press the ENTER bi.lton.

_'_ _;'es

the

:h<;+FLAY buttor_

®The tray will close automatically, and playback will
then start from the first chapter or track of the disc.
You need to press tile PLAY button only when tile
tray has been closed by pressing the OPEN/CLOSE
button.
o When you playback the DVD which a title menu is
recorded, it may appear on the screen. In this case,
refer to "USING THE TITLE MENU".

[0 03
With a DVD containing
a title menu,
desired titles from the menu.

you can select

P _;>;,sthe 'TY?LE t>_ c,_;.
• The title menu will appear.

o Press tl'le arrow bi.ftons (_/A/I_/-',II)
to cha_ge
setting, and then press tile ENTER button.

the

Notes
<,_M£??_: 5C£££:N
o If you press the OPEN/CLOSE button in tile 7, £LIN7
....
I=,_==:;,
[L
TV/VCR mode or power-off, the DVD tray will
open.
For DVDs
®If you press the DVD side PLAY button in the
®Press the DISC MENU button to call up the DVD
TV/VCR mode or power off, you can start the DVD
inenu.
playback.
®A "prohibited icon" may appear tit
the top-right on the TV screen
Note
during operation, warning that a
®Colltellts
of
mellus
menu
prohibited operation has been
• Press the TITLE
button and
to callcorrespoilding
tip the title metro.
operafioris may vary between discs. Refer to tile
encountered by the DVD player
or the disc.
mariual accompariyhlg tile disc for details.
- 37 EN
OIAII

pHOnS ¸' _ _°_,,*_ ,:_,, ,

• Playback
muted.

o Playback
will stop, and then
appear the resuming
message at
the center.

will pause,

with sound

/q'P%s1/'e_,q,.,

Pr.,_
tse P/,A' b tto_, F sysac_ w
sat/
o'_" be so _ w_®_>//'e/';_'÷,,
:us :)aybac(
,, :;.,>:_
...... W_';!S_
1:k _[)i9(00

esu/'®

_lsyb

¢/4,

Notes
• Resuming

playback

is not available

with some discs.

® It is possible to switch from the DVD play mode to
the TV mode. Even if the power is turned off, the
resume function enables to playback
on from the
previously
interrupted
point. But note that the
Marker comm_mds are not saved,
oThe resume function ctm be reset by pressing the
STOP buttun twice or by opening the disc loading
tray,

_._,

ps..

o The next picture frame is displayed with sound muted each
time the button is pressed.

';*

_ioet/%s

t/"_e sAUS_!VSY LL burro

I/'e

<;t'l_;_L£(buI:_'

(

esu'_,ep/a)'b

ok,

_°#'"_'.._I/M *m,,_
'
_,,I1,.,
playbsok.

® For DVDs, pressing the FWD _1_ or REV _
button cycles the playback speed in four steps, l[n case
of DVDs, the sound will mute.
For audio CDs, the playback

speed is x16 fixed.
Fwo _

Pess

'Ih_: P/,.£Y buI:_'

Burn

'eu/m

<:_ '_o_r_al
-38-

EN
OIAll

• sei_©_d w/_e paybacR
s paused
_e/'_@ _ s sr_u ed }
• Slow motion mode will be activated.

(Sou_

® Pressing and holding the _
button for more than
I second cycles the playback speed in three steps.
Select an appropriate
speed while referring to the
speed indication on the screen.

t _"_;ecourt
• Example:
1 hour, 23 minutes
30 seconds

J_iN]

11"

P_'ess the hi, rser c butt®_s:s to set he des _ed

and

1 -+2-+3-+3-+(I

--oo o...........
1

Notes

®In the case of DVD, Time Search in Title is effective. (But Time Search in Chapter is ineffective.)
• In the case of CD, Time Search in Track is effective.
(But Time Search in the entire disc is ineffective.)

Notes
®Slow playback is not available with audio CDs.
* The reverse of slow playback is not available.
* If you press the _
button _md release immediately during playback is paused or slow, it returns to
normal playback.

Peas /se S}£AB©q SSO©K b tte_} arid t/_e_
p'esst/se/_,_'ne
cbutte}/stoseec/Yatteo_

o Perform

the title
a c _a_e'

and the

i_
[

o When playback is stopped, press the nmneric buttons to
select a Title. The Title will be located and playback
will start.
Notes
is not avail-

®Some discs which the chapter number isn't
played cannot playback from a desired chapter.
TRICKS

WITH

THE SKIP BUTTONS

®If wrong numbers are entered, press the CLEAR
button _md re-enter the correct numbers.

_sress _: e r_u/%e_c bu_or_s
_}es ed rack_%_4 _be_

• The selected track will be located, and playback will start.

chapter search after setting them on
the same screen at the same time. /
Changeover by A/V buttons.
* During playback,press
the numeric buttons to select a
Chapter. The Chapter will be located and playback will
start.

® Playback from a desired title or chapter
able with some DVDs.

®Playback from a desired time count is not available
with some discs or if the unit is in stop mode.

dis-

(1_1, _!_1)

You ctm also press the SEARCH
MODE
button, use the numeric
buttons to enter the track number.
When the track number is entered

in the entry box, playback of the
desired track will start automatically.

TRICKS WITH THE SKIP BUTTONS (1_'_, _1)
If the SKIP button _1 is pressed during playback or
while playback
is paused,
the current
track is
skipped and the next track is played. When the SKIP
button I'_1",_is pressed once, the top of the current
track is located for replaying. When the SKIP button
I'_l_l is pressed
again
while
Within
2-second
playback,

the previous

track is located.

If the SKIP button _1 is pressed during playback or
while playback is paused, the current chapter will be
skipped and the next chapter will be played. When the
SKIP button I',_t is pressed once, the top of the current
chapter will be located for replaying. When the SKIP
button I',@_1is pressed again within 2-seconds after
playback begins, the previous chapter will be located.
-39-

EN
01All

You can define

a section

to be played

back repeatedly.

For DVDs
• A single title or chapter
• Pressing the REPEAT
the screen as follows.

is played back repeatedly.
button

cycles

the display

Tile current

( h lpter is

phyed

repe aedl 5,

blck

Tile ctlrrellt

Title is

phyed

repe aedl 5,

blck

* The starqng
selected,

_:__: po

point (A) will then be

_>ft'edes

o The selected
section
played back repeatedly.

For audio

will

[
(_

ed secto

be (_

CDs

oTIle whole
repeatedly.

disc

or a single

track

is played

back
;[_ l"b ext

• Pressing the REPEAT button cycles the display
the screen through Off, Track and All.

/_
___

_
-,,_;_--

----L
" _

The ctlrre,l[

Track is

phyed

repe ltedl 5,

blck

press t e AB

Notes
® With

DVDs, the A-B repeat
within the current title.

The whole Disc is
phyed

A,B ..........
>,pc,:_' paybsc

section

can be set only

repe ltedl 5,

® With

audio CDs, the A-B repeat section c_m be set
within the current track.

A-B repeat is not available
DVD.

with some scenes hl

To cancel the A point which was set, press RETURN
button.

A-B repeat playback
is not ffmction during
chapter, track or all repeat playback had set.

title,

Notes
• Repeat playback is not available with some discs.
®The REPEAT setting will be cleared when moving
to other title, chapter or track.
• Repeat playback is not function during A-B repeat
playback.

- 40 -

EN
01All

Youctmdefinetheparttobecalledback,

Setthemarker
• Usingthecursor
(_1/_) button,position
thecursor
ontothemarker
number
shown
as"NOTSET".
Press
theENTERbuttonwhenthescreen
tobe
reviewed
appears.
Themarked
timewill bedisplayed.
Upto5
pointscanbemarked.

• The progranl

screen

ll'®I_!_

I]I;

5">A _:t
• 50 programs
()liCe

tile

will appear.

I%1111®1i(I

,,_.:_"_':...................
mm _×,_:_:m_
1

}sill

BI_:;

can be displayed
Press

screell,

"T"

the ENTER

Ices;

the marker

• Using the cursor (_1/_ '_) button, position the cursor
on to the marker number to be cleared and press the
CLEAR button.
To clear all markers, place tile cursor on "AC"
clear markers) m_d press tile ENTER button.
,>

PI_:._,::_
I?ITUIIN
....

OI_II(;F

,I,_;

[

11_:145;0511_2;II_11X

4_16_B11145630103

n==_=,:_
8TART _

I£LI[£

bul

button.
• Playback

Clear

!'el-._.>.

go to the next page.

Callbackthemarker
* Usingthecursor(_1/_) button,position
tilecursor
onto the marker number to be called back and press

I 'I_¢R /'_/1 '(/b_:; S,

:_I!A_:..,
.l_t_l/
.......

(

{'_0[}_{ b!. t.>Ir < I _:
lh® d
" <",'"
s ,,,:£

will stal_ in tile programmed

• While the program is being
button works as follows.
• Press

the STOP

button

ordel:

played back, the STOP

once

and then

button again, playback will restart from
where the STOP button was pressed.
continued)

(All

tile PLAY
tile point
(Program

• Press the STOP button twice and then the PLAY but-

eXi

ton again, playback will restm_ from the track in the
usual way. (Program cleared)

Notes
Adding programs is not possible during program
playback. You must stop tlle current playback before
such operations can be carried out.
Press the CLEAR button to cancel a program. The
most recently entered program will then be deleted.
Up to 99 programs ctm be entered.
Playback from a desired track and random playback
are not available during program playback.
Program settings are cleared when tlle power is
turned off or the disc loading tray is opened.
Press the MODE button to check the programmed
setting.

- 41 -

EN
01All

P_ess the h:J©<)Eb_Ao_ n sop

>_ode

• The program setting menu screen will appear.

Note
®Zooming ffmction does not work while disc menu is
I 8TaRT:_

shown.

EXlT:_]

hes s¢:s;'_

Note
• Program playback is not available during random
playback.

set

a/' _'4P:3f }e-,_e_':_xe< d}s¢,

®The MP3 menu screen shows up.
"ALBUMS" and files are
referred to as "TRACKS".

........

"+" appears at the beginning
of the album name.
If all the TRACKS cmmot be displayed at once on
the screen, "_" appears to go to the next page. If
there is a previous page, "_" appears on-screen. On
the left of "V", the current page and the total number of pages are displayed.

Images can be enlarged four times on the screen to
your taste.

oAn image will be enlarged
screml.

at the center of the

®The player can recognize
TRACKS altogether.

• Press the ZOOM button again, aid the image will be
back to the previous size.

0,...,
........
>o

255 ALBUMS

and

_;_y_:;
J.

The TRACKS will be played

] _l_

in the order of selection.
[WhenTRACKSareselected]
[When an ALBUM is selected]

+........
'({ .......
......[]

+ALBUMS3

] I
......=_'

o'_<.,.-.'J
d; _{7".co' pay, '_;_pg_ J<;b<, Press the _ button. The TRACK
20<
%!) t'_: _L/:W
• Playback

® During play, a desired track can be directly searched.
Just type in the TRACK number with the numerical
buttons.

will start.

® If the typed TRACK number is not available,
the
°°disable" symbol appears and the direct search mode
is cancelled.
• Playback

cannot

be started

from

a desired

3 ?"_'

_"" ">

time

count,

The information
checked.

on an

MP3

disc

• The TRACK currently in play
will be highlighted.

in play

gOLOERNAME

can

.*es

? _. ]

TRACK11
ri_ACK12
r_¢AOKiS

The

program

t'e !VIO[:lii:
but®f:,
screen

shows

tip.

rRACKii

• The ALBUM name being displayed
by the elapsed time of the track.
• [_will be displayed
selected.

will be replaced

when the repeat

[_A

: Album

[_T

: Track repeat

.......

: Disc repeat

TRACKH
r £3,!
r£A_
r_;K!

[_D

(folder)

play has been

repeat
_ ]

The programmed

track is displayed

in the right-hand

screen,

pay

When the _,_ button is pressed, the album stop in the
current left-hand screen will be highlighted.

e :rr.::el-_d _:;sppr.:ars.

® If the entire program cannot be displayed at once on
the screen, "V" appears to go to the next page.
{_ W/f_m b_:,: ds;c bss b_:'e'_ prep?ram 'r_ed, p_'ess
t°_e PLAY b/,4to_
P _3ss_
t'_e SEARCH _/O©_} b_ tton d(_ s9 p}ay,
back

play starts.

Programmed

• TheSERACHmenushnwsup.
• A track currently in play or under
RESUME
ON will be highlight-

_[ .........
_
H;_;1

+ALBUM51
+ALBU_52
T_AC_I
T_ACK52

] ]

ed.
case of
of RESUME
OFR
the ][n
firstthetrack
the disc will
be [I _l'_;I*=na_21

payed F'txen p_ess be
pay p_g

Notes

highlighted.
®Press the RETURN
button, and
the SEARCH menu disappears.

T_AC_I •
T_ACI_2
T_ACKSl
T_ACK22

Press the CLEAR button, and the last-programmed
entry will be deleted.
® Press the RETURN
button, and the STOP screen
will show up with the program contents in memory.
The program setting will be c_mcelled when
power is turned off or the disc tray is opened.

PLAY buto/stoss_t
- 43 -

the

EN
OIAll

Pess

e_i©©Eb_,t

• The random

setting

®;_wee

menu screen will appear.

START: _

• Random

sg3©Pmode

EXIT

play starts.

Both right and left channels
are active (stereo)•

Tile DVD player has a function
select the desired audio language

Only the left channel is active.

which allows you to
mid sound mode.

Only the right channel

,<:;eect he

<)÷s/_e<_ s/,_d e

o The audio lmaguage can be chtmged if multiple
languages are recorded on the DVD being played.

• Current audio language and sound mode will be displayed when you press the AUDIO button at first.

V
IAUOiO3 J_N Doil,vD__C__'_

Notes
Pressing the Audio button may not work on some
DVDs with multiple audio languages
(e.g. DVDs
which allow audio language
setting on the disc
menu). Operation
varies between discs, so refer to
the mmmal accompanying
the disc.

v
Au°l° 2 FRED°II'VD_ ICH4Bk3

is active.

® If a desired l_mguage is not shown after pressing the
Audio button several times, the disc does not have
_m audio source in that language.

• The audio l_mguage resets to the one which has been
selected in the setup mode, every time the power is
turned on or discs am replaced. If that language is
not available on a disc, a language defined by the
disc is selected.

For audio

CDs

The screen
seconds.

® Pressing the AUDIO button cycles the sound mode
through STERE(), L-CH grad R-CH.

display

will

disappear

after

If you use DIGITAL AUDIO OUT jack,
mode of audio CDs can not be changed.
- 44-

about

the sound
EN
OIAII

oft may
selected

take time
language.

* The screen
seconds.

display

to display
will

the

subtitles

disappear

after

in the
about

®When "SUBTITLE NOT AVAILABLE" appears
onscreen, it means no subtitle is recorded on the
Tile DVD player
select the desired

sw_

has a function which
language for subtitles.

I"*,e? !:>few;

"_e 9_:_??'TL, E bu

• The subtitle l_mguage can be changed
are recorded
in multiple
languages
being played.
o The subtitle language
subtitles are recorded
DVD being played.
q SUBTITLE

allows

scene.

if the subtitles
on the DVD

cgumot be changed
in a single language

1 ENGI6

you to

The DVD player
select the desired

if the
on the

has a function
camera angle.

P_'_::_;_,
;,::_ AHGLE/';_

which allows

o ° 5_/,__i!4f?sybs(;_

• If the disc contains sequences recorded
ent camera angles, the angle icon (_)

_"'=""_Subtifle

_'="='_Subtille

you to

from differwill appear

at the top-right of the screen. You can change the
camera angle when the icon appears on the screen.
• The camera angle cannot
not contain
sequences
cmnera angles.

be ch_mged if the disc does
recorded
from different

OFF

Angle 1

• Pressing the SUBTITLE
button cycles the subtitle
l_mguage from SUBTITLE
1, SUBTITLE
2 and all
the languages recorded.
Current subtitle mode will be displayed when you
press the SUBTITLE
button at first.
Press the SUBTITLE button, and then press the cursor ("_/_')
button to set it to on or off,

Angle 2

Angle 8

Note
Notes

®The screen display will disappear
seconds.

after about 5

®Some discs allow subtitle language setting on the
Current camera tingle will be displayed when you
disc menu. (Operation varies between discs, so refer
press the ANGLE button at first.
to the m_mual accompanying the disc.)
®If the desired language is not shown after pressing
the SUBTITLE button several times, the disc does
not have subtitles in that language.
The subtitle language resets to the one which has
been selected in the setup mode, every time the
power is turned on or discs are replaced. If that
language is not available on a disc, a language
defined by the disc is selected.
EN
- 45 OIAII

AI:
Current track number
/ the number of total
tracks.

You can check the informatkm
about the disc by
pressing tile DISPLAY button on the remote control,

L=_TIME:
current disk and
remaining
timeof of
lapsed time
the
the current disc.

For DVDs
®Use the number button to start from a desired track
,%
OH

7,49

0:01:46

0:03:27

L M "_

CH{Chapter):
Current chapter number
/ the number of total

i
3

Elapsed time of the
current chapter and

chapter.
•

remainilg
time of the
TIME:
current chapter.

You can set to make the black parts of the picture
brighte_:
TT{Title):
Current title number
/ the number of total
titles.

';hess e_ViO/}[i')_t('_d_/'

" The setup screen will appea':

• Use the number button to start from a desired chap
ter

_(;}

[

" BIT RATE indicator
information

mm mm

which

:_><.',.::_>
>eEH"{£{

r}b_tto

_;_y:_:_;

J,_AC_W_:OFFI

{ose

0" o

]._

of,

®ON : It makes the dark pa_ls brighte_:(Default : OFF)
OFF : Original picture which is recorded on the disc
will be shown

_" @SS t°_@ .,,>u'%
_:: > .,_,,_£Yb st OY_ 8(8_G

BK RATE

,_'

wil appear.
is recorded

• Press the RETURN button to exit the display

in DVD.

- Layer number(*)

<_<.
'• ) It appears

LO: Layer 0 is playing back
LI: Layer 1 is playing back
• Current
BIT RATERepeat
showssetting
the quantity
D C: Chapter repeat
,_T: Title repeat
A,D B: A-B repeat

You can enjoy stereophonic sound system when you
playback Dolby Digital and PCM 4gkHz sound

when the layered disc is playing back.

that,
• The setup screen will appea,: []s.s.s

For audio

o.o.J

CDs
ON : TruSurround

TR(Track):
Current track number
/ the number of total
tracks.

ON.(Default

: OFF)

OFF : TruSurround OFE
Press the DISPLAY button or the RETURN button

T,.E:

to exit the display

current track and
timeofofthe
_ remakling
lapsed time
the current track.

- 46 -

EN
01All

1 LANGUAGE
I]i ;P! AS
3/4J
0
PARI N xd

l'l

SET:

I _SC.ENU

I _AN_MA_E
CO_E
4_

SET-UP

s#_

}

u/¢ "_¢ ii'i¢ 1:>9, r', od

Press/he

........

Ai"g ' b_At®';s to seect

al', tern

SUF, P bul'to '

back in selected

language.)

Language Setting for Audio trod Subtitle is not available with some discs. Then use the Audio and
Subtitle

I 'ANGM E°°N °'SI
ORIGINAL
<:/l::
ORIG 4/,,

and the ordinary

Be sure to press the SETUP button, or the setting
will not work.

1SET-M

Note

s_td the_ p'ess the E_qFER butto_s

1.AUDIO
2 SEI
_
_bSC ,4 _,}{,

/
1/

® The setup mode will be canceled
screen will appear.

AUDIO:
(Voice is played

1.LANGUAGE
H_ SPLAY
;AUbO
4 PA[_/NIAI

ect _s sue:;

SET-UP
I LANGUAGECONTROLS

/SeB

8S8

_'s e

If "OTHER" is selected on the AUDIO, SUBTITLE
or DISC MENU setting screen, the Language Code
setting screen will appeal: Press the numeric buttons
to enter the desired Emguage code while referring to
the list on page 51.

• The setup screen appears.

8ELBOT: I_

l:>,?<_: / e A¢[W$'b4t

button.

Details

are on pages 44 and 45.

You can also select the item by pressing
which displayed with the item.

When you change the setup
button if you are in playback

the numbers

items, press the STOP
mode.

SUBTITLE:
(Subtitles are shown in selected language.)

I LANGUAGE OONTROL8
AI/;G
2.SUBTffLE
3EgO ,4 'U

O>lG NAI
OFF
ORN I/ AI

DISC MENU:
(The disc menu appears in selected language.)

LANGUAGE CONTROLS

1 AUD}G
E8 BT}IIE
3.DISC MENU
SET-UP

ORIG}NN
O_
ORIGINAL

- 47 -

EN
OIAll

AUTO POWER OFF (Default : ON)
Set or not set to turn off after the screen saver is started and
no keys are pressed for 30 minutes.
::_e_s :_eSE

UP b

_'_SlOPho_e,
I

DISPLAY CONTROLS

1IV /OE_
2 A'/GI ICO'
3.AUTO POWEROFF
4 BACKGRO %)

I SET-UP
• The setup screen will appear,

_:'_
ON
ON
PACK

_.t_>....

, E×,T:SE_"°':[]D'.....
,,:,::_"_°_,,,_,_
sE,:0_,c_i
I

BACKGROUND
COLOR
Select blue or hlack.
_s

I
BOX

...........
_®. E/!TER

(Default

: BLACK)

butt®n

f
I

2.DISPLAY
:i /JDO
PARE/!AL

JI SET-UP

.:J P'_;;sst:'®/_i'W utto_'s
/'es
TV MODE
4:3 LETTER
and bottom

,_res;s; f'e/£t"._q_?R
(Det'ault

: Full height

r
bs

: 4:3 LETTER

BOX : Wide screen

4:3 PAN & SCAN

P i,, (u COl
{ /, O/OW ROFF
SET-UP
4.BACKGROUND

<;'N
ON
BLACK

_>"e,;',"
.........t'e

AiW

_}"

":_"
>

I
........

-.--

DISPLAY CONTROLS

::*.,tto 9 to 5 ÷

a :e_; 'e4

on,

BOX)
with black bars on top

picture,

trimmed

,.................
'®SE
b, bu

>_.

both sides

The setup mode will be c_mceled and the ordinary
f

screen
J DISPLAY CONTROLS

SET-UP

1 .TVMODE
2 A_(Z[/ CO
3 AJTO_OWER@F
J SET-UP
s DACKGROJ/4O

will

appear.

4:3 LETTER BOX
O'
0/
gLAD(

Notes

Be sure to press [l_e SETUP button, or [l_e setting
will not work.
®You can also choose the item by pressing the numbers.

DISPLAY CONTROLS
TM MODE

& _C/,J'

I 1.4:3 LETTER BOX

ANGLE
Display

ICON (Default : ON)
or not display the Angle

icon on the screen.

SET-UP
I

DISPLAY CONTROLS

'//YELl
2.ANGLE ICON

_<')L/ l/
ON

I
_ BOX

- 48 -

EN
01All

Pess
oThe

t e SEYUP

DTS (Default : OFF)
On : Output DTS sound
Set to On when the unit is connected to DTS
Decnder.

b trois _'_ S/'%3P mode

setup screen will

(I .....

appear,

]

I AUDIO CONTROLS

:£: ....

/ s ;
22,tl

Peg9

It/®

Ni'_g _ b/It

henpess

OrS

_(i_ _;e®C;

ENtERbu

_\_!do

;{?rid

EXIT:

/hes

b'es9

u[o

SET-UP

SELECT:

_/i'2

SET:

EXIT:

I,_

CANCEL:

r_armI

Sampling (Default : AUTO)

• Press

£e/£i_g

Set the output for the DVD
recorded in PCM 96kHz (96kHz

g
s AUDIO
pxsr,

P'ese

H>i

o_s

Down

OFF

)OWl

I/d

3.DTS

c,.....
=

);1:
)!

b/@_ens to seeet

t_e/!£NY_}]_:_

the

_,/'!r bnttons

press the ENTER

gm item, and then

AUDIO OPTIONS
1)NC
2 DOLP( D_GH/q
8D_S
4.DOWN SAMPLING

to select

button.

SETUP MENU

;';_d

or 48kHz)

j
OFF
ON
OFF
AUTO

DRC (Default :OFF)

On : DRC

SET UP
I

SELECT:
EXIT:

I_/_
_

(Dynamic Range Control)
• This funcfinn is for cnntrnHing
the range of sound
vnlume.

By cnmpressing

iz
i ,,z
1.AUTO

it is possible nnt nnJy tn suppress the output nf loud
sound at night and but also to raise the volume of
low sound,

SET-UP

[ AUDIO CONTROLS
1.DRC
2Bl
X BKil;I
3[? t:
4
_ SidN N

I
I

SELECT: P'_/L"2

SET:

EXIT:

CANCEL: _J

When playing a disc with copyright

1
J

protection

• If ynu select 96KHz, copyright protection will be
activated _md nn sound will come nut. If ynu select
AUTO, sound will be down sampled at 48KHz.

OFF
ON
_F
,J3

SELECT: I_/E'2

SET:

EXIT:

CANCEL:

I_'i_IT_i_]
I

I D°wN
sAMpuNG

the range nf sound vnlume,

• This function is effective nrlly for tile sourid recnrded by Dnlby Digital recnrding.

I AUDIO
CONTROLS I

SET:
CANCEL:

%<,*<

{} _,, @£;:T'

D <,H+,_

# The setup ll]nde will be canceled and tile
screen will appear.

ordinary

Dolbg Digital (default : ON)
On : Output by Dnlby Digital
Set to On wheri the unit is connected to Dnlby Digital
Decoder.
SET-UP
I

AUDIO

2IDOLBY

4
_[RC

CONTROLS

DIGITAL

4SH

14_

_t
OFF(

SELECT:

V_/L"]

SET:

EXIT;

CANCEL:

e_'eraI

- 49 -

EN
01All

When

"_ARENTAL

Press the _/V
:_esss/-,j, S/:Y[JP k,t ®_

LEVEL"

is selected

buttons to select _m item from "ALL"

or 8 to 1 and then press the ENTER

® The setup screen will appear.

SET-UP
I

button.

PARENTAL

CONTROLS

I PAaE.TA_
_EVa

ALL
8
1 .LANGUAGE

) Pl,
_/,/J ) o
',sl I

Q [1
5

•

I SETO

SEL£CT:VqiIF'I

SET:

EXIT:

CANCEL:_

When

SELECT:
EXIT:

"CHANGE"

_/_"_
_

SET:
CANCEL:

is seleeted

®Press the numeric buttons tn enter the 4 digits
word. Then press the ENTER button.

I LANGUAGE
2 DISPI AY
3AUE}O
4.PARENTAL

I SETUP

I Y._,_:_::+
191 II_,II'_ Ii0 i')I
di!lit, ==+
i. ssword,
hi. l_ ,

Ill]

pass-

SET UP
!

PARENTAL CONTROLS
PASSWORD

Please enter cl_rrentpassword

EXIT: _

CANCEL: _

O_s tO :_I_!_, th® 4 o

tltll]

= = • -,

ll'_!ss
........

i
7%'2 I]
lh<; I.I,_.,,,=,

® When doing this for the first time, enter any 4 digits.

®The setup mode will be canceled and the ordinary
screen will appear.

(except for 4737) That number will be used as the
password from the second time onward.
• By entering the password,
control level and password

you can then change
settings.

the

_ALL
All parental

lock is cancelled.

• Level 8
DVD software of any grade (adult/general/children)
can be played back.

PARENTAL CONTROLS
I

PASSWORD

Levels 7 to 2

Please enter a 4-digl password.
SETUP

,;t',,J,,",,tDe N,i_F' b/ to _s o see<,/ >:_/'_h,xn ,;'}

I SET-UP
I
I PA_ENTA_OONTRO_S
I

[

Only DVD software intended
children can be played back.

for general

use and

• Level 1
Only DVD software intended for chikh'en can be
played back, with those intended
for adult and
general use prohibited.

Notes
® With some DVDs,

it may be difficult

to find if they

are compatible
with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
Record the password

in case you forget it.

/1"?'OUP( 1
RCA connector >( 2
1/8" stereo (3.5 ram)
One pin jack,
500m Vpp (75 ohm)
RCA connector X 2
Digital encoded
infrared light system
5°C to 40°C
(41 °FN104°F)
AC 120V, 60Hz

85W
19"
H:19-21/32" (500mm)
W:23-13/16" (605mm)
D:I8-11/16" (475mm)
48.5 lbs (22kg)

125W
27"
H:25-1/2" (648mm)
W:26-9/16" (675mm)
D:Ig-I 1/16" (500mm)
86 lbs (39.0kg)
Remote Control Unit with
2"AA"batteries
Owner's Manual

85 dB
84 dB (EIAJ)
0.07% (EIAJ)
Below the measurement
limitation (+/-0.001%
W PEAK) (EIAJ)

* Designs and specifications are subject to change without notice and without our legal obligation.
+ If there is a discrepancy between languages, the default language will be English.
- 56 -

EN
01AI 1

- 57 -

EN
01AI

• CONTROLES DE OPERACION Y FUNCIONES .....
58
PANEL FRONTAL DEL televisoHDVD/VHS .........
58
MANDO A DISTANCIA .........................
58
VISTA POSTERIOR ............................
58
• PREPARACION PARA LA UTILIZACION ..........
60
CONEXIONES DE ANTENA/TELEVISION
POR CABLE ..................................
60
INSTALACION DE LAS PILAS...................
60
CONEXION A TOMAS DE ENTRADA EXTERNA .... 60
MODE DE ENTRADA EXTERNA .................
60
CONEXION A UN SISTEMA ESTI_REO (Para DVD) .. 60
CONEXION A UN AMPLIFICADOR EQUIPADO CON
TOMAS DE ENTRADA DIGITAL PARA, POR EJEMPLO,
PLATINA MD O PLATINA DAT (Para DVD) .........
60
CONEXION A UN DECODIFICADOR DOLBY DIGITAL,
DECODIFICADOR DTS O DECODIFICADOR MPEG
(Para DVD) ...................................
61
TV SECTION
• PREPARACION PARA LA UT1LIZACION ............
62
SELECCION DE IDIOMA .......................
62
PREAJUSTE DE CANALES ......................
62
DVD SECTION
• REPRODUCCION DE UN DISCO ................
63
REPRODUCCION DE UN DVD DE VIDEO O UN CD DE
AUDIO ......................................
63

CONTROLES
OPERACJON

[

la figura

1 de la p(_gina 9

]

Consulte

la figura

2 de la pfigina

]

la figura

3 de la pfigina

1. Bot6n POWER
Pfilselo para conectar y desconectar

la alimenlaci6n.

2. Botones VOLUME A/V
Ptilselos para controlar el nivel del w)lumen
el DVD y el televisor.

para

3. Botones SKIP (para DVD)
Salta capftulos o pistas hasta un punto deseado.
4. Bot6n PLAY
Inicia la reproducci6n del contenido del disco o la
cinta.
5. Bot6n STOP
Detiene

la operaci6n

7. Bandeja de carga del disco
8.1ndicador de DVD
Parpadea durante el modo del DVD.
9. Bot6n SELECT
Ptilselo para cambiar a un modo de televisor,
modo de entrada externa o modo de DVD.
10. Indicador del televisor/la videograbadora
(TV/VCR)
Parpadea durante el modo del televisor/la
videograbadora
11. Botones CHANNEL A/V
Pdlselo para seleccionar el c_mal memorizado.
Pfilselo para cambiar a un modo de televisor
cmmdo modo de DVD.
12. Indicador de grabaci6n (RECORD)
Parpadea durante la grabacidn.
Se enciende en el modo de espera de la grabaci6n con
temporizador.
Botdn de grabacidn de un toque (OTR)
Actiw_ la grabaci6n de un toque. ($61o en el televisor/DVD/VHS)
13. Botdn de grabaci6n (REC)
Ptilselo para iniciar la grabaci6n manual.
14. Bot6n de rebobinado (NEW) (para televisor/
videograbadora)
Ptilselo para rebobinar la cinta, o para ver la imagen en
retroceso rfipido durante el modo de reproducci6n.
(Btlsqueda con rebobinado)

Y FUNC ONES

Consulte

6. Bot6n OPEN/CLOSE
Ptilselo para insenar discos en la bandeja
retirarlos de ella.

15. Botdn de avance rapido (FWD) (para televisor/
videograbadora)
Pfilselo para avanzar r@idamente la cinta, o para ver la
imagen en avance r@ido durante el modo de reproducci6n. (Btlsqueda con avance rfipido)
16. Botdn de parada (STOP)
Ptilselo para detener la cinta.
Botdn de expulsidn (EJECT)
Ptilselo en el modo de parada para expulsar la cinta del
televisor/videograbadora.
17. Ventanilla del sensor del mando a distancia
18. Toma HEADPHONE
Para conectar auriculares (no suministrados)
y
escuchar en privado.
19. Toma de entrada VIDEO
Conecte aquf la toma de salida de vfdeo de una
videocfimara o de una videograbadom.
20. Tomas de entrada AUDIO L/R
Conecte aquf las tomas de salida de audio de una
videocfimara o de una videograbadora.
21. Compartimiento
del videocasete
22. Boton PICTURE
Presione
gen.

del disco o la cinta.

- 58 -

para entrar en el modo de ajuste de ima-

IDI8

23. Botones de ndmeros
Mode del televisor:
Pulse dos dfgitos para tener acceso
al canal deseado.

directanlente

Recuerde pulsar "()" antes de elegir un canal de un
solo dfgito.
Botdn +1 O0
Pdlselo para seleccionar canales de televisidn per
cable cuyo ndmero sea igual o superior al 100.
Mode DVD:
Pdlselo para introducir el ndmero deseado.
Botdn +10
Pdlselo para introducir los ndmeros deseados
cuyo ndmero sea igual o superior al 10.
24. Botdn PAUSE
Hace una pausa en la operacidn del disco o la
cinta.
25. Botdn de veloeidad de einta (SPEED)
Ptilselo pare elegir la velocidad de grabacidn deseada:
SP/SLR
26. Boton C-RESET
Pdlselo pare reponer el contador a 0:00:00.
27. Botdn DISPLAY
Mode del televisor/la videograbadora:
Pdlselo para visualizar el ndmero del canal en la
pa_talla. Si 1o pulsa de nuevo, el ndmero del canal
desapamcer£
Mode de DVD:
Visualiza el estado actual on la pantalla del televisor con fines de comprobacidn.
28. Botdn SETUP
Pdlselo para activar o salir del mode de mends de
televisor o pmparacidn de DVD.
29. Botdn TITLE
Visualiza el mend de tftulos.
30. Botdn CLEAR
Repone un ajuste.
31. Botdn MODE
Activa el mode de rcproduccidn
mode de reproduccidn
aleatoria.
32. Botdn SEARCH MODE
Pdlselo para localizar
33. Botdn AUDIO

programada

34. Botdn SUBTITLE
Pdlselo para seleccionar
deseado.
35. Botdn REPEAT
Repite la reproduccidn
pista actual.
36. Botdn ANGLE

un idioma

42. Botdn ZOOM
Amplia par_e de una imagen de DVD reproducida.
43. Botdn MUTE
Pulse el botdn MUTE para apagar el sonido de un
programa de TV. La visualizacidn
del nivel del
sonido cambia de ROJO CLARe
a AZUL
CLARe.)
Pulse de nuevo el botdn MUTE o el
botdn VOL _, o V para restaurar el sonido.
44. Botdn SLEEP
Ajusta el temporizador
45. Botdn SELECT

para dormir.

Pulse para cambiar entre los modes TV/VCR y
DVD. Podr_ vet el mode (TV/VCR o DVD) en el
indicador del panel delantero.
46. Toma de entrada ANT.
Con_ctela a una antena, sistema de televisidn per
cable o sistema de satdlite.
47. Cable de alimentacidn
Con_ctelo a una toma de CA convencional
(120
V/60 Hz).
NOTA: Retire el cable de alimentacidn
del gancho
para evitar romperlo antes de conectaflo a
una toma de CA convencional.
48. Toma de salida de audio digital COAXIAL
ConEctela a la entrada digital de un amplificador
decodificador
extemo.

o el

49.Toma de salida AUDIO LIR
Con_ctela a la entrada de audio analdgico de un
amplificador
o decodificador
extemo.
NOTA: Las tomas de entrada de audio (roha y
blanca) en el lade trasero sirven para producir no el son televisor ni el son de
entrada extema, sine el son DVD.

un punto deseado.

Pdlselo para seleccionar un idioma
mode de sonido deseado.

38. Botdn RETURN
Para volver a la operacidn anterior.
39. Botdn ENTER
Pdlselo para establecer un ajuste.
40. Botones de fleehas
Mode de televisor:
Pdlselo para seleccionar un mode de ajuste desde
el mend que aparece en la pantalla del televisor.
Pdlselo para seleccionar o ajustar desde un mend
particular.
Mode de DVD:
Se utiliza cuando se hacell aiustes mientras se
observa la visualizacidn en una pantalla de televisor.
41. Botdn DISC MENU
Visualiza mends de DVD.

de audio oun

de snbtfmlos

del disco, tftulo, capftulo o

Pdlselo para cambiar el _ngulo de la c(lmam y
verde, desde un _ngulo diferente, la secuencia que
estfi siendo reproducida.
37. Botdn A-B REPEAT
Repite la reproduccidl_ de una secci(m seleccionada,

- 59 -

ES
IDI8

PRERARAC ON

PARA LA

fnente alas tomas AUDIO L/R y VIDEO de este televisor/DVD/VHS.
Y luego pulse el bot6n SELECT
hasta que TVIDEO TT al mezca en la pantalla.

NOTA:

Consulte

la figura

VHF/g!HF

A/V_£s A.S 3£_%RADAS

En algnnas
exterior.

utilizar

dreas serd necesario

Consulte

la figura

nna antena

CAJA
DOA'

Utilice esta conexi6n si su sistema de televisi6n
cable se conecta directamente
a su

Consulte

sin necesidad

la figura

Consulte

4 de la pfigina 11

TELEVLSN)N
P()I_ CAf_LE
CON VEI¢7"H)OR/f_ECOD1E7CA

televisor/DVD/VHS
tidor.

4 de la pfigina 11

por

Consulte

la figura

4 de la pfigina 11

1) Abra la tapa del compartimiento
mando a distancia presion{mdola
la flecha.

]

Conexiones de antena/televisidn por cable
Continfia en la pfgina siguiente.

Si su proveedor de servicios de televisidn por cable le
suministra una caja de converlidor
o si usted utiliza
un sistema de satdlite, podrd utilizar la conexi6n bdsica mostrada aquf.
I

5 de la pfigina

Cuando utilice una serial de entrada extema (otra
videograbadora
o una videocdmara),
conecte los
cables de salida de audio/vldeo
del equipo de reproducci6n alas tomas AUDIO IN/VIDEO IN de su
televisor/videograbadora.
Y luego pulse el bot6n
CHANNEL _, o T hasta que "AUX" aparezca en la
pantalla.
Usted puede programar el temporizador
para que
explore todos los canales que pne&m mcibirse en su
ZOlla.

de caja de conver-

4 de la pfigina

la figura

DE COAq b;RT°H)OA'/D£'CODH, TCADOA
0 ('AJ_4 DE _iATZ_'LHE

• Cuando conecte una videograbadora monoaural
(otra fuente) a este televisor/DVD/VHS, conecte la
toma de salida de audio de la videograbadora
monoaural (otra fuente) a la toma AUDIO L de este
televisor/DVD/VHS. El audio saldrd iguahnente en
los canales L y R.

Consulte

la figura

6 de la pfigina

NOTAS:
,, Asegdrese de desconectar
la alimentaci6n
a todos
los componentes
del sistema antes de hacer la
conexi6n a otro componente.
* Consulte el manual del propietario de su sistema
estdmo y de cualquier otro componente
que vaya a
conectar al televisor/DVD/VHS.

de las pilas del
en el sentido de

* Las tomas de entrada de audio (roha y blanca) en el
lado trasero sirven para producir no el son televisor
ni el son de entrada extema, sino el son DVD.

2) Inserle 2 pilas tamtuSo "AA" en su comparlimiento
colocando las polaridades
(+/-) en sus posiciones
correspondientes.
3) Vuelva a poner la tapa.

Cmmdo vea un programa grabado en otto fuente
(videograbadom
o videocdmara),
utilice las tomas de
entrada de audio/video
de la parte delmltem del televisor/DVD/VHS.
Conecte

las tomas de salkla de audio/video

Utilice un cable digital coaxial (de venta en el comercio) para las conexiones de audio.

de otto

Consulte
- 60 -

la figura

7 de la pfigina

]
ES
IDI8

NOTAS:
,, Lafuentedeaudiodeundiscodelformato
de
sonido
ambiental
DolbyDigitalde5,1canales
no
puede
sergrabada
comosonidodigitalporuna
platinaMDoDAT.
,, Asegfirese
dedesconectar
laalimentaci6n
detodos
loscomponentes
delsistema
antesdehacer
la
conexi6n
aotrocomponente.
,, Consulte
losmanuales
delpmpietario
deloscomponentes
quevayaaconectar
al
televi
soffDVD/VHS.
,, Ponga
DOLBYDIGITALy DTSenOFFparala
salidadeaudioenelmododepreparaci6n.
La
reproducci6n
eneltelevisor/DVD/VHS
utilizando
losajustes
incorrectos
puede
generar
distorsi6n
de
mido,y tambiEn
puede
estmpear
losaltavoces.
,, E1audiosesilenciarlcutmdo
DOLBYDIGITALse
ponga
enOFFy VIRTUAL3Dseponga
enON
paralasalidadeaudioenelmododepreparaci6n
y
ustedseleccione
lafuentedeaudiodelformato
de
sonido
ambiental
DolbyDigitalde5,1canales.

,, A menos que se haga la conexi6n a un decodificador Dolby Digital o DTS, ponga DOLBY DIGITAL y DTS en OFF para la salida de audio en el
modo de preparaci6n. La reproducci6n en el televisor/DVD/VHS utilizando los ajustes incorrectos
puede genemr distorsidn de mk]o, y tambi_n puede
estropear los altavoces.
,, E1 audio se silenciarl cuando DOLBY DIGITAL se
ponga en OFF y VIRTUAL 3D se ponga en ON
pare la salida de audio en el modo de preparaci6n y
usted seleccione la fuente de audio del formato de
sonido ambiental Dolby Digital de 5,1 canales.

Fabricado bajo licencia de Dolby
Laboratories,'!Dolby!' y el sfmbolo de la D
doble son marcas de ffibrica de Dolby
Laboratories' Trabajos confidenciales sin

I
I

pub car

]

,DTS,!y'DTS

Digital Out, son marcas de

fabr ca de D g ta Theater Systems, ncl

Si se utiliza este televisor/DVD/VHS para reproducir
fuentes del formato de sonido ambiental Dolby
Digital de 5,1 cmmles o de sonido ambiental DTS, el
televisor/DVD/VHS darl salida a un flt0o de dmos
Dolby Digital o DTS desde su toma de salida de
audio digital COAXIAL. Conectando el reproductor a
un decodificador Dolby Digital o DTS, usted podrl
disfrutar de un ambiente mils convincente y real con
un sonido ambiental potente y de alia calidad de tipo
profesional tal como el que se oye en salas de cine.
Utilice cables digitales coaxiales (de venta en el comemio) para las conexiones de audio.
I

Consulte

la figura

8 de la pfigina

NOTAS:
" Asegfirese de desconectar
la alimentaci6n
de todos
los componentes
del sistema antes de hacer la
conexi6n a otro componente.
,, Consulte los manuales del propietario
ponentes que vaya a conectar al
televi soffDVD/VHS.

de los com-

,, Si conecta un decodificador
Dolby Digital, ponga
DOLBY DIGITAL en ON para la salida de audio
en el modo de preparaci6n.
,, Si conecta un decodificador
DTS, ponga DTS en
ON para la salkla de audio en el modo de
prepamcidn.

-61

ES
IDI8

PRER&RAC ON

Cerci6rese...

PARA LA

• La alimentaci6n del televisor/videogmbadora
deber5 estar conectada.
E_ el ejemplo de abajo, el reloj va a ajustarse asf:
FECHA: 1 de mayo de 2001
HORA: 5:40 PM

Pulse el bot6n SETUP en el mando a distancia.
Conecte el cable de alimentaci6n
convencional.
NOTA:

a una toma de CA

Pulse el botdn PLAY/A o STOP/V para indicar
"AJUSTE RELOJ". Luego, pulse el botdn F.FWD/II_.

Si aparecen algunos dfgitos en la esquina de
la pantalla, ptdse el botdn POWER sin desenchtffar el cable de alimentacidn.

Pulse el bot6n PLAY/• o STOP/V para indicar
"AJUSTE MANUAL RELOJ". Luego, pulse el bot6n
F.FWD/I_.

Pulse el botdn POWER para encender el
televisor/DVD/VHS.

Pulse el bot6n PLAY/• o STOP?!I' hasta que aparezca el mes deseado. (Ejemplo: Mayo - 05) Luego,
pulse el botdn F.FWD/I_.

Seleccione "ESPAI'qOL" o "ENGLISH" (inglds),
"FRAN_AIS" (francds) utiliztmdo el bot6n de flecha
I_ o-ql.

Pulse el bot6n PLAY/• o STOP/V hasta que aparezca el dfa del mes deseado. (Ejemplo: 1 - 01) Luego,
pulse el botdn F.FWD/I_.

Pulse el bot6n flecha • o • para sefialar "AUTOPRESELECCION".
Luego pulse el bot6n flecha I_. El sintonizador
explorarfi y memorizarfi todos los canales activos de
su firea.
NOTAS:
• El televisor/videogmbadora
distingue entre los
czmales de televisi6n est{mdar y los cmmles de televisor por cable.
• Si desea reproducir o grabar una cinta ANTES de
preajustar el sintonizador, usted tendr5 que pulsar
el bot6n SETUP en el mmldo a distancia. Para
preajustar de nuevo el sintonizador, consulte
"REPETICION DE LA PREPARACION DE
CANALES".
• La unidad de televisor/videograbadora
puede
reconocer los canales de TV como ellos de TV por
cable a causa de los condiciones de recepci6n. En
este caso, pruebe el preajuste automfitico de nuevo
en los condiciones finas de recepci6n.

E1 sintonizador se pare en el c_mal memorizado mils
bajo. Si desea recuperar canales seleccionados, usted
podrfi seleccionar directamente el canal deseado con
los botones numerados del mando a distancia o con
los botones CHANNEL • o •.

Pulse el bot6n PLAY/•
o STOP/_' hasta que aparezca el afio deseado. (Ejemplo: 2001 ) Luego, pulse el
bot6n EFWD/I_.

Pulse el bot6n PLAY/• o STOP/V hasta que aparezca la hora deseada. (Ejemplo: 5, PM) Luego, pulse el
botdn EFWD/I_.

Pulse el bot6n PLAY/• o STOP/V hasta que aparezca el minuto deseado. (Ejemplo: 40)

Pulse el bot6n SRTUP en el mando a distancia.
Aunque los segundos no se visualizan, 6stos
empiezan a contar desde 00 cutmdo se pulsa SETUP
en el mando a distancia. Utilice esta funcidn para sincronizar el reloj con la hora correcta.

- 62 -

ES
IDI8

REPR

DE [!N

Pars empezar
Conecte la alimentaci6n del televisor, amplificador y
cualquier otro componente que est_ conectado al
reproductor DVD. (Cambie el sistema de entrada para
adaptarlo al reproductor DVD, y compmebe
volumen del sonido sea correcto.)

que el

7 P@seel bot6s POWEB
• La alimentaci6n
se conectar4.

P@se e_ Ibet6_ ORE[H/CLOSE

• La btmdeja de carga del disco se abrir4.

Ponga

tm disco

e_ Ila bandeia

• Asegfirese de que el disco estd correctamente
asentado en el hueco correcto, con el lado de la etiqueta
hacia arriba.

P@se e_ Ibet6_ PLAY.

• La btmdeja se cermrti automfificamente
y la reproducci6n empezarti desde el primer capflulo o pista
del disco. Necesitarfi
pulsar el bot6n PLAY s61o
cuando la bmldeja haya sido cerrada pulsmldo el
botdn OPEN/CLOSE.

• Cutmdo reproduzca un DVD que tenga grabado un
menfi de tftulos, el menfi tal vez aparezca en la pantalla. En este caso, consulte "UTILIZACION DEL
MEN(J DE T[TULOS".

Pulse e_bot6n @.sTOP para detener la reproduccidn

- 63 -

ES
IDI8

SYLVANIA
LIMITED
FUNAI CORE will repair this SYLVANIA
workmanship
as follows:

product,

WARRANTY
free of charge

in the USA in the event of defect

in materials

DURATION:
PARTS:

F-UNAI CORP. will provide _arts to replace defective parts without charge for one (1) year fl'om the
date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this
warranty.

LABOR:

FUNAI
original

LIMITS

CORE will provide
retail purchase.

the labor without

charge

for a period

of ninety

(90) days fi'om the date of

AND EXCLUSII)NS:

This warranty is extended
only to the original retail purchaser. A purchase
purchase will be required together with the product to obtain service under
This warranty

shall not be extended

to any other person

receipt or other
this warranty.

proof of original

retail

or transferee.

This warranty is void and of no ef'fEct if any serial numbers on the product are altered,
or if service was attempted by an unauthorized
service center. This SYLVANIA Limited
any product not purchased and used in the United States.

replaced,
warranty

defaced, missing
does not apply to

This warranty only covers failures due to defects in material or workmanship
which occurs during normal use. It
does not cover damage which occurs in shipment, or fifilures which are caused by repairs, alterations or product not
supplied by FUNAI CORE, or damage which results from accident, misuse, abuse, mishandling,
misapplication,
alteration,
fimlty installation,
improper
maintenance,
commercial
use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY
DOES NOT COVER PACKING
CONTROL),
ANY COSMETIC
PARTS, COMPLETE
FUNAI

CORE

AND

ITS REPRESENTATIVES

MATERIALS,
ASSEMBLY

OR AGENTS

ANY ACCESSORIES
(EXCEPT
REMOTE
PARTS, DEMO OR FLOOR MODELS.

SHALL

IN NO EVENT

BE LIABLE

FOR ANY

GENERAL,
INDIRECT
OR CONSEQUENTIAL
DAMAGES
ARISING
OUT OF OR OCCASIONED
BY THE
USE OF OR THE INABILITY
TO USE THIS PRODUCT.
THIS WARRANTY
IS MADE IN LIEU OF ALL
OTHER WARRANTIES,
EXPRESS
OR IMPLIED,
AND OF ALL OTHER LIABILITIES
ON THE PART OF
FUNAI,
ALL OTHER
WARRANTIES
INCLUDING
THE WARRANTY
OF MERCHANTABILITY,
AND
FITNESS
FOR A PARTICULAR
PURPOSE,
ARE
HEREBY
DISCLAIMED
BY FUNA1
AND
ITS
REPRESENTATIVES
IN THE UNITED STATES.
ALL WARRANTY
INSPECTIONS
AND
SERVICE
CENTER.
THIS WARRANTY
AUTHORIZED
SERVICE FACILITY.

REPAIRS
MUST BE PERFORMED
IS VALID
WHEN
THE UNIT

BY A FUNAI AUTHORIZED
IS CARRIED-IN
TO FUNAI

IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, IE AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT. PLEASE CONTACT FUNAI
CORP.

ATTENTION:
FUNAI CORE RESERVES
WITHOUT PRIOR NOTICE.

THE RIGHT TO MODIFY

ANY DESIGN

To locate your nearest SYLVANIA Authorized Service Center
please ca11_1-800-968-3429 or write to the following:
FUNAI CORPORATII)N,
Customer Service

PLEASE

OF THIS PRODUCT

or for general

service procedure,

INC.

lI)0 North Street; Teterboro, NJ 07608
Tel :1-800-968-3429
DO NOT SHIP YOUR UNIT TO THE TETERBORO

ADDRESS,

Printed in Malaysia
TD500/600UA

0EMN01908
_

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 64
Page Layout                     : SinglePage
Page Mode                       : UseNone
Producer                        : Goby Monitor Application version 3, 2, 1, 4
Create Date                     : Thu Apr 05 15:44:05 2007
Author                          : 
Title                           : 
Subject                         :

EXIF Metadata provided by EXIF.tools

Sylvania 6719DC User Manual TV/VCR/DVD COMBO Manuals And Guides L0610377

SYLVANIA TV/VCR or DVD Combo Manual L0610377 SYLVANIA TV/VCR or DVD Combo Owner's Manual, SYLVANIA TV/VCR or DVD Combo installation guides

Navigation menu

Versions of this User Manual:

Views

Navigation