Sylvania 6720FDE User Manual TV/VCR/DVD COMBO Manuals And Guides L0610388
SYLVANIA TV/VCR or DVD Combo Manual L0610388 SYLVANIA TV/VCR or DVD Combo Owner's Manual, SYLVANIA TV/VCR or DVD Combo installation guides
User Manual: Sylvania 6720FDE 6720FDE SYLVANIA TV/VCR/DVD COMBO - Manuals and Guides View the owners manual for your SYLVANIA TV/VCR/DVD COMBO #6720FDE. Home:Electronics Parts:Sylvania Parts:Sylvania TV/VCR/DVD COMBO Manual
Open the PDF directly: View PDF 
.
Page Count: 56
| Download | |
| Open PDF In Browser | View PDF |
\
\
\
\
\
\
\
\
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
TO RAIN OR MOISTURE.
TO REDUCE
THE
RISK
The caution
TO QUALIFIED
marking
SERVICE
PERSON-
[
!
is located on the rear of the cabinet.
IMPORTANT
l°Read instructions-All
should be read before
the safety and operating
the appliance is operated.
2°Retain Instructions-The
salety and operating
should be retained for future relereuce.
3.Heed Warnhlgs-All
warnings on the appliance
operating instructions should be adhered to.
4.Follow Instructions-All
should be lollowed.
operating
SAFEGUARDS
instructions
AMEUBLESCet appareil ne doit
_ti'e plac_ que SL!I'UUuleuble (aveL'
roL!lettes) recolnmaud_
le labricaut. Si vous l'iustallez
OL! saus
instructions
and use instructions
in the cleaning
description
not use this TV/VCR/DVD
other-
par
sur
Lmless proper ventilation is provided
instructions have been adhered to.
near
or the lnanLifacturer's
I0.Power Sources-This
TV/VCR/DVD
should be operated
only h'oln the type of power source indicated on the marking label. II you are not sure of the type of pow'er supply to
your home, consult your appliance dealer or local power
company. For TV/VCR/DVDs
intended to operate from
this TV/VCR/DVD
on an unstable
or table. The TV/VCR/DVD
may
to someone, and serious dalnage
with a cart, stand, tripod, bracket,
the lnanulacturer,
or sold with the
TV/VCR/DVD.
Any lnountiug of
tile appliance should follow the
manufacturer's
iustructious and
should
use a mounting
accessory
recolmneuded
by tile Ulal_lufacturer.
An appliance and cart combination
should be moved with care.Quick
POUR
ered. The openings should never be blocked by placing the
TV/VCR/DVD
on a bed, sofa, rug, or other similar surface.
This TV/VCR/DVD
should never be placed near or over a
radiator or heat register. This TV/VCR/DVD
should not be
placed in a builtqu installation such as a bookcase or l'ack
water4i)r example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in a wet basement, or near a swimming pool,
and the like.
8.Accessories-Do
not place
cart, stand, tripod, bracket,
fall, causing serious injury
to the appliance. Use only
or table recommended
by
D'AVERTISSEMENT
LESCOMPOSANTES
ET MEUBLE
A ROULETTES
9. Ventilation-Slots
and openings in the cabinet and the back
or bottom are provided for ventilation and to ensure reliable
operation of the TV/VCR/DVD
and to protect it froln overheating, and these openings must not be blocked or cov-
6.Attachments-Do
not use attachlnents not recomlneuded
by
the TV/VCR/DVD
manufacturer
as they may cause hazards.
and Moisture-Do
APPAREIL
faces irl'Ogulibres risquent de d&tabiliser l'ensemble et de le renverser.
bility of the loss of an authorization code lbr a CATV converter, is not intended to be unplugged by the user for clear>
ing or any other purpose, may exclude the reference to
unplugging the appliance
wise required in item 5.
SYMBOLE
uu meuble tt roulettes, d@lacez les
deux ensembles avec pr0cautiou.
Uu alwOt brusque, l'utilisatiou
d'uue force excessive et des SUl'-
and in the
5.Cleaning-Unplug
TV/VCR/DVD
from the wall outlet be%re
cleaning. Do not use liquid cleaners or aerosol cleaners. Use
a dalnp cloth lot cleaning.
EXCEPTION:
A product that is meant for uninterrupted
service and, that for some specific reason, such as the possi-
7.Water
THIS APPLIANCE
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AND
MAINTENANCE INSTRUCTIONS IN THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE
PARTS INSIDE. REFER
SERVICING
NEL.
DO NOT EXPOSE
THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK 1S PRESENT
WITHIN THIS UNIT.
CAUTION
CAUTION:
SHOCK,
battery power, or other sources,
instructions.
reler to the operating
II.Groundhlg
or Polarization-This
TV/VCR/DVD
is
equipped with a polarized alternating-current
line plug(a
PORTABLE_CART
WARNING
,,_J'_
plug having one blade wider than the other). This plug will
fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit,
contact your electrician to replace your obsolete outlet. Do
not defeat the safety purpose of the polarized
plug.
12.Power-Cord
Protection-Power-supply
cords should be
routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles,
and the point where they exit lrom the appliance.
stops, excessive force, and uneven
surfaces may cause the appliance
and cart combination to overturn.
-2-
EN
IBI5
FIGURE
A
EXAMPLE
OF ANTENNA
GROUNDING
AS PER
NATIONAL ELECTRICAL
CODE
LEAD IN
WIRE
GROUND
CLAMP_
ANTENNA
DISCHARGE
UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EOUIPMENT_.
(NEC
NEC - NATIONAL
ELECTRICAL
CODE
_411----
$2898A
13.Outdoor
Antenna
cable
system
the auteuna
some
or cable
pl_)tection
charges.
Article
ANSI/NFPA
proper
810
No.
of grounding
unit,
connection
receiver
and
the wall
This
unused
outlet
lightning
and disconnect
damage
of overhezld
light
circuits,
or power
lines
touching
such
might
or circuits.
extreme
power
it from
systeln.
e. If the TV/VCR/DVD
due to
power
When
care
lines
should
lines
or where
or cil_'uits
or other
to keep
as contact
with
17.Object
from
and
Liquid
Entry-Never
through
touch
points
dangel_us
voltage
result in a fire or electric
kind on the TV/VCR/DVD.
18.ServMng-Do
yourself
dangerous
uot attempt
as opening
voltage
service
shock.
push
or short
Never
to service
or removing
or other
objects
openings
hazards.
out parts
spill
this
covers
of any
as they
liquid
or dalnaged
in any
change in per-
21.Saii_ty Cheek-Upon
completiou of any service or repairs to
this TV/VCR/DVD,
ask the service technician to pert_)rm
routine saIety checks to detennine that the TV/VCR/DVD
kind
may
that
has been dropped
istics as the original part. Uuauthorized substitutions
may
result in fire, electric shock, injury to persons or other haz_
ards.
them
not overload
wall outlets and extension
can result in a risk of fire or electric
shock.
into this TV/VCR/DVD
to rain or watel_
20.Replacement
Parts-When
replacelnent parts are required,
be sure the service technician has used replacement parts
specified by the manufacturer
that have the same character-
an outside
be taken
has been exposed
f. When the TV/VCR/DVD
exhibits a distinct
li_)nnance-this indicates a need li_)rservice.
not be
it can fidl into
installing
should
have fallen iuto the
way.
be fatal.
16.Overloading-Do
cords as this
qualified
unat-
unplug
or cable
system
in the vicinity
system,
it is left
of time,
antenna
or frayed.
d. If the TV/VCR/DVD
does uot operate normally by tLqlowiug the operating instructions. Adjust only those controls
that are covered by the operating instructions,
as improper
adjustment of other controls may result in damage and will
otteu require extensive work by a qualified technician to
restore the TV/VCR/DVD
to its normal operation.
surges.
outside
electric
power
c. If the TV/VCR/DVD
unit,
and requirements
to the TV/VCR/DVD
and poweMine
antenna
discharge
the antenna
loc_lted
such
b. If liquid has been spilled, or objects
TV/VCR/DVD.
to
of antenna-discharge
or when
periods
cord or plug is damaged
structure,
lk)r this TV/VCR/DVD
storm,
R)
a. When the power-supply
(Fi X. A)
protection
flar long
Lines-An
static
respect
PART
19.Damage
Reqnking
Servke-Uuplug
this TV/VCR/DVD
tl"om the wall outlet and refer sexwicing to qualified service
persormel under the liAlowing conditions:
Code,
with
elect]_)des,
a lightning
will prevent
15.Po_er
location
electrode.
added
built-up
Electrical
to an antenna
to grounding
during
tended
wire
or
be sure
and supporting
conductors,
lk)r the grounding
and
information
of the lnast
14.Lightning-For
antenna
so as to provide
surges
of the Ntdional
of the lead-in
size
is grounded
voltage
70, provides
grounding
grounding
system
against
an outside
to the TV/VCR/DVD,
810-21)
POWER SERVICE
GROUNDING
ELECTRODE
SYSTEM
(NEC ART 250,
grounding-If
is conuected
SECTION
is in proper operating
could
22.1lear-This
of any
condition.
TV/VCR/DVD
product
should be situated
away
ll"om heat sources such as radiators, heat registers, stoves,
or other products (including amplifiers) that produce heat.
TV/VCR/DVD
may
Refer
expose
you to
all servicing
to
personnel.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WiDE SLOT, FULLY
INSERT.
ATTENTION: POUR I_VITER LES CHOCS leLECTR[QUES, INTRODUIRE LA LAME LA PLUS LARGE
DE LA FICHE DANS LA BORNE CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU'AU FOND.
- 3-
EN
IBI5
IMPORTANT
COPYRIGHT
LASER SAFETY
INFORMATION
This unit employs a laser. Only a qualified service
person should remove the cover or attempt to service this device, due to possible eye inju U.
Unauthorized
copying, broadcasting,
public perfof
m_mce and lending of discs are prohibited.
FCC WARNINGThis equipment
may generate or use radio frequency energy. Changes or
modifications
to this equipment
may cause
harmful
interference
unless the modifications
CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED
HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
are expressly approved in the instruction
manual. The user could lose the authority to operate this equipment if an unauthorized
change
or modification
is made.
CAUTION: VISIBLE AND INVISIBLE LASER
RADIATION WHEN ()PEN AND INTERLOCK
DEFEATED. DO NOT STARE INTO BEAM.
RADIO-TV INTERFERENCE
LOCATION: INSIDE, NEAR THE DECK
MECHANISM.
This equipment has been tested trod found to comply with the limits for a Class B digital device, pursurest to Part 15 of the FCC Rules, These limits are
designed to provide reasonable protection against
harmful interference in a residential installation,
This equipment generates, uses, trod can radiate
radio frequency energy and, if not installed and
used in accor&mce with the instructions, may cause
harmful interference to radio communications.
This Class B digital apparatus
Canadian ICES-003.
complies with
Cet appareil num_rique de la classe B est conforme 'a la norme NMB-003 du Canada.
CAUTION: TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO WIDE
SLOT, FULLY INSERT.
However, there is no guartmtee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment
and receiver.
ATTENTION: POUR I_VITER LES CHOCS
I_LECTRIQUES, INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA
BORNE CORRESPONDANTE DE LA PRISE
ET POUSSER JUSQU'AU FOND.
3) Connect the equipment into an outlet on a circuit different from that to wlfich the receiver is
connected.
4) Consult the dealer or an experienced radio/TV
technician for help.
-4 -
EN
IBI5
For safe operation and satisfactory
performance
of
your TV/VCR/DVD,
keep the following in mind
when selecting a place for its installation:
® Shield it from direct sunlight
sources of intense heat.
and keep it away from
• Avoid dusty or hmnid places.
• Avoid places with insufficient ventilation for proper
heat dissipation. Do not block the ventilation holes at
the top mid bottom of the unit. Do not place the unit
on a carpet because this will block the ventilation
holes.
• Install
unit in a horizontal
,, Avoid locations
subject
position.
to strong vibration.
® Do not place the TV/VCR/DVD
fields.
nero strong magnefic
• Avoid moving TV/VCR/DVD
to locations
temperature
differences am extreme.
Moisture condensation may occur inside the unit
when it is moved fiom a cold place to a warm place,
or after heating a cold room or under conditions of
high humidity. If a DVD is played in a TV/DVD/
VCR which has moisture, it may damage the DVD
and TV/VCR/DVD. Therefore when the condensation
occurs inside the unit, turn the POWER on mid allow
at least 2 hours for the unit to dry out.
The following symbols below appear in some headings and notes in this manual, with the following
meanings
[TV/VCR
1
: Description refers to TV/VCR operation (in the
TV/VCR mode).
where
: Description refers to playback of DVD video discs
(in the DVD mode).
: Description refers to playback of audio CDs
(in the DVD mode).
• Do not htmdle the power coM with wet hands.
,, Do not pull on the power cord when disconnecting
it from maAC wall outlet. Grasp it by the plug.
® If, by accident, water is spilled on your unit, unplug
the power coM hnmediately mid take the unit to our
Authorized Service Center for servicing.
,, Do not put your fingers or objects into the
TV/VCR/DVD disc loading tray.
,, Do not place anything directly on top of the unit.
: Description refers to playback of MP3 discs
(in the DVD mode).
: Description refers to the items to be set by the
QUICK mode (in the DVD mode).
A NOTE ABOUT RECYCLING
This product's packaging materials are recyclable grad can be reused. Please dispose of any materials in
accordm_ce with your local recycling regulations.
Batteries should never be thrown away or incinerated but disposed of in accor&mce with your local regulations concerning chemical wastes.
The serial number of this product may be found on the back of the unit. No other TV/VCR/DVD has the same
serial number as yours. You should record the nmnber grad other vital information here and retain this book as
a permtment record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
-5-
EN
IC29
]
m IMPORTANT
SAFEGUARDS
m PRECAUTIONS
...2,
3
................
LOCATION
4
...................
5
AVOID THE HAZARDS OF
ELECTRICAL SHOCK AND FIRE .5
WARNING
....................
5
SYMBOLS USED 1N THIS
MANUAL .....................
m TABLE OF CONTENTS
m FEATURES
5
..........
6
....................
m OPERATING
FUNCTIONS
7
CONTROLS
................
m PREPARATION
AND
.......
11
ANTENNA/CABLE
CONNECTION ................
11
EXTERNAL
))iC
.........
)NIENIS
,
PICTURE SEARCH
STILL PICTURE
............
..............
VERTICAL HOLD CONTROL
m SPECIAL
12
THE BATTERIES
. .12
INPUT MODE ......
12
CONNECTING TO A STEREO
AMPLIFIER EQUIPPED WITH DIGITAL INPUT JACKS SUCH AS MD
DECK OR DAT DECK (for DVD) .13
CONNECTING TO A DOLBY
DIGITAL DECODER (tot DVD)
. .14
. .15
CLOCK SET UP
(AUTO / MANUAL) .........
DAYLIGHT-SAVING
15. 16
TIME ......
17
CHANNEL SET i Jp ............
18
DELETING
CHANNEL
18
(OR ADDING)
...................
REPEAT .....................
27
PROGRAM ...................
AUTO REPEAT PLAYBACK
m SEARCH
.....
.....................
28
...............
28
TIME SEARCH
...............
28
MP3 PLAYBACK
29
TRACK SELECTION
..............
..........
29
REAL TIME TAPE COUNTER
AUTO REWIND-EJECT
m RECORDING
...29
........
.................
29
30
........
30
. ..............
...19
................
PICTURE CONTROL ...........
CLOSED CAPTION SYSTEM
....
V-CHIP SET UP ...............
41
RANDOM PLAYBACK
m CHANGING
.........
THE SETTINGS
SUBTITLE LANGUAGE
AUDIO LANGUAGE
41
....
42
........
42
...........
42
STEREO SOUND MODE ........
42
CAMERA ANGLE
42
42
42
COPYING A VIDEO CASSETTE
(Requires a VCR or camcorder)
. . .31
m TIMER
......................
32
AUTOMATIC
TIMER RECORDING
..........
AUTO RETURN
SLEEPT1MER
32
EXTENSION
.33
TIMER
34
...............
34
................
.........
m THE ON-SCREEN INFORMATION...43
m CHANGING THE DVD SETUP
ITEMS .......................
LANGL]AGE SETTING
.........
44
44
DISPLAY SETTING
............
45
AUDIO SETTINGS
............
45
PARENTAL CONTROL
m TROUBLESHOOTING
m MAINTENANCE
m ON SCREEN" DISPLAY
.............
.........
GUIDE
46
...47
34
.........
35
m CABLE CHANNEL
DESIGNATIONS
..............
35
...............
DISC HANDLING
m SPEC1FICAI70NS
m WARRANTY
THE DISCS
............
36
PLAYABLE DISCS
............
36
19
DISC TYPES
20
23
23
m ABOUT
m PLAYING
.................
...........
SO
.............
50
. ............
S1
Back Cover
A DISC
..............
BASIC PLAYBACK
DISC MENU
36
37
............
37
.........
37
.................
37
TITLE MENU .................
37
RESUME
38
....................
.24
STEP BY STEP PLAYBACK
25
FAST FORWARD/REVERSE
SEARCH ....................
3g
26
SLOW FORWARD / SLOW
REVERSE ....................
38
THE MTS SYSTEM
.............
...................
.........
..............
41
PROGRAM ...................
VIRTUAL SURROUND
SELECTING
ADJUSTMENT
41
...........
31
......
PAUSE ......................
SLOW MOTION
41
..............
OTR (One Touch Recording)
23
TRACKING
A MP3 DISC ..........
BLACK LEVEL SETTING .......
MTS RECORDING/MONITOR
MODE ......................
NORMAL PLAYBACK
40
30
GENERAL FEATURES
CHECKING THE SELECTED
MTS MODE ..................
mPLAYBACK
40
.........
SKIPPING UNWANTED SCENES
DURING
RECORDING .................
19
21
m MTS(Multi-Channel
Television
sound) SYSTEM ................
m VIDEO CASSETTE
...40
19
WATCHING A TV PROGRAM
DEGAUSSING
39
40
RANDOM PLAYBACK
m PLAYING
39
......
m SPECIAL PLAYBACK FUNCTION
ZERO RETURN
INDEX SEARCH
....
39
SETUP SCREEN
27
DVD SECTION
m TV OPERATION"
MARKER
27
m SET UP FOR USE
THE LANGUAGE
...26
SEARCH
...............
..........
HINTS FOR AUTOMATIC
RECORDING .................
SELECTING
TIME SEARCH
..........
TIMER PROGRAM
15
TITLE / CHAPTER
26
PLAYBACK
TV/VCR SECTION
.............
26
RENTAL PLAYBACK
NORMAL RECORDING
CONNECTING TO EXTERNAL
INPUT JACKS ................
INSTALLING
(
m SPECIAL FEATURES
9, 10
FOR USE
[ABLE
26
.....
26
m SEARCH
26
TRACK
FUNCTION.
SEARCH
-6 -
38
..........
.............
.....
3g
39
39
EN
IC29
[ TV/VCR
Mode ]
• Hi-Fi system-The Hi-Fi stereo recording
system
offers you excellent sound quality with a dynamic
range of 80dB, frequency response from 20Hz to
20kHz, trod 0,005% wow and fluttm:
• 2 Step picture search operation-You
can view a
video program at a high speed or super high speed
in either a forward or reverse direction in LP _md
SLP mode. For SP mode only high speed.
• Three different playback tape speeds : SP/LP/SLP
• Rotary4-head Record/PlaybackSystem-Four heads
ensure excellent picture quality and special effects playback.
,_ Index Search-Fast-forwards
to start of next recording.
® Slow Motion-View
recoNed program at slower
than normal speed.
• Infrared remote control
• Two different
recording
tape speeds
: SP/SLP
• Auto Head Cleaner-Automatically
cleans video
heads as you instal or remove a cassette.
,_ Zero Return-The
tape returns to counter of
0:00:00 by rewinding or fast forwarding.
® Still-"Freeze"
the picture at any time, for close
viewing of a pallicular scene.
® Trilingual on screen TV/VCR setup display
selectable in English or Spanish or French
• Real time counter-This shows the elapsed recording
or playback time in hours, minutes, and seconds. The
"-" indication will appear when the tape is rewound
fmlher thgm the tape counter position "0:00:00".
• 181 channel capability PLL frequency synthesizer tuner with direct station call-(A convener may
be necessary to view scrambled cable ch_umels.)
• Digital Auto Tracking (DTR)-Automatically
adjusts the tracking for each tape you play.
• Rental play mode-Improves
playback picture
quality from worn tapes, such as rental tapes.
® Auto repeat-Allows
you to repeat the playing of a
tape indefinitely without pressing the PLAY button.
,_ Time seamh-Let
you set the TV/VCR/DVD
to
advance the tape by entering the desired playback
time you w_mt to skip,
• OTR (One Touch Recording)-Instant
timed
recording from 30 to 480 minutes is possible at the
push of the REC/OTR
button.
® 1 Year, 8 events (including Daily and Weekly
Timer Recording)-The
built-in timer allows you to
record up to 8 programs at different thnes on different channels up to I year in advance. The Daily
timer allows recordings to be made of daily broadcasts, and the Weekly timer allows recording to be
made once a week up to the end of the tape.
,_ Auto return-After
timer recoNing is finished, the
TV/VCR/DVD
can return to the beginning of the
recording.
® Sleep timer-Allows
you to have the TV/VCR/DVD
automatically turn off at a desired time.
• Auto Clock Setting-Allows
you to set the clock
function from a PBS broadcast station.
® Closed caption system-You
may view specially
labeled (cc) TV programs, movies, news, prerecorded tapes, etc. with either a dialogue caption or
text display added to the program.
• Auto power on and off system-Automatically
turns on the TV/VCR/DVD
when you insert the
cassette, turns off after auto-rewind,
and ejects
when the beginning of the tape is reached.
• Auto rewind when the end of a tape is
reached-This
function doesn't occur when using
timer recording.
,_ Smooth mode change-TV/VCR
mode, DVD
mode automatically
changes without control.
Timer Program Extension-Allow
you to shift the
time schedule for automatic timer recording.
,_ V-CHiP-Enables
parents to prevent their children
from watching inappropriate material on TV.
A NOTE ABOUT RECYCLING
This product's packaging
materials are recyclable
accor&mce with your local recycling regulations.
and cgm be reused.
Batteries should never be thrown away or incinerated
tions concerning chemical wastes.
but disposed
- 7 -
Please dispose
of in accordance
of any materials
in
with your local regulaEN
IC29
l DVD Mode ]
• Dolby Digital sound
This TV/VCR/DVD
cm_ hmldle Dolby Digital surround sound having 5.1 channels when connected
to a Dolby Digital decoder.
• Still/fast/slow/step
playback
Various playback modes are available including still
pictures, fast forwaN/reverse,
slow motion _md step
frames.
• Randomplayback
This TV/VCR/DVD
for audio CD and MP3
can shuffle the order of tracks
to play them in rmldom order.
• Program playback for audio CD and MP3
You c_m program the order of tracks to play them in
troy desired ordm:
• DVD menus in a desired language
You can display DVD menus in a desired language,
if available on a DVD.
• Screen saver/Auto
power-off functions
The screen saver program starts when there is no
input from the TV/VCR/DVD
for five mhmtes in the
stop mode. When the screen saver program is activated
for 15 minutes, the power automatically turns off.
• On-screen
display
hfformation
about the current operation can be displayed on a TV screen, allowing you to confirm the
currently
active functions (such as program playback), on the TV screen using the remote control.
• Search
Chapter search / Title search / Track search / Time
search
• Repeat
Chapter / Title / Track / Group / All / A-B
• Marker
The part designated by user cml be called back.
• Resume Play
User cgm resume to playback
the play was stopped.
• Virtual Surround
from the part at which
• Bit rate indication
• DRC (Dynamic range control)
You can control the range of sound volume.
• Subtitles in a desired language
You can select a desired language
for the display
subtitles, if that language is available on a disc.
• Selecting a camera angle
You can select the desired camera angle,
contains sequences recoNed from different
if a disc
angles.
• Choices for audio language and sound mode
You can select the desired audio language mM sound
mode, if different languages trod modes are available
on a disc,
• Parental
lock
You can set the control level to limit playback
discs which may not be suitable for children.
of
• Automatic detection of discs
This TV/VCR/DVD
automatically
detects if the
loaded disc is DVD, audio CD or MP3 on disc.
• Playback MP3 disc
NOTE:
• We do not recommend the use of universal remote controls. Not all of the functions may be controlled with
a universal remote control.
If you decide to use a universal remote control with this TV/VCR/DVD, please be aware that the code nmnber given may not operate this TV/VCR/DVD. In this case, please call the manufacturer of the universal
remote control.
-8-
EN
IC29
( )PERA
....
-TV/VCR/DVD
I IN{= C()NTROI=S
........
AND
': IN{.,
F
I I )HI
..... ,
FRONT PANEL - [Fig.l]
DVD
2
3
4
3
bu oos
5
6
7 8 9 10
11
1213 14
5. STOP Button
- REMOTE CONTROL -
[Fig. 2]
Stops operation
4
15 16 17 18 19
20
21
[TV/VCRP.26/ DVDP.371
of the disc. (or front panel)
Stops operation of the disc or tape contents.
(remote control)
1
22
........
5
.............
4
.......11
.....
SPEED
25
(UVU)3 (TV/VCR)
CRESET
VSURR
MUTE
C,_ C:::_ -,,,,,,,43
42
,,, 3 (DVD)
,15 (TVNCR)
5
-,-41
40
.......
39
-" 38
6.OPEN/CLOSE
Button [DVDR371
Press to insert discs into or remove
tray.
them from the
7. Disc loading tray
8. DVD indicator
Lights on during DVD mode.
9. SELECT Button
Press to change to TV/VCR mode, external
mode or DVD mode.
IO.TV/VCR indicator
Lights on during TV/VCR mode.
11. CHANNEL A/V Buttons
Press to select memorized
input
channel.
12. Recording indicator
Flashes during recording. Lights up in the Stmldby mode for Timer Recording.
13. REC/OTR (RECORD)Button [TV/VCRR30.311
Press for m_mual recording. Activates One Touch
31
......36
Recording. (OTR is only during TV/VCR mode.)
32
35
14. REW Button (for TWVCR) [TV/VCRP.26]
.....
4
Press to rewind the tape, or to view the picture
rapidly in reverse during playback mode. (Rewind
Search)
15. F.FWD Button (for TV/VCR) [TV/VCRP.26]
Press to rapidly adwmce the tape, or to view the
picture rapidly in forward during playback mode.
1. POWER Button [TV/VCRP.15/ DVDP.371
(Forward Seamh)
Press to turn the power on and off.
16. STOP/EJECT Button [TV/VCRR281
2.VOLUME _/V Buttons
Press to control the volume level for the DVD and TV.
Press to stop the tape motion. Press in the Stop
mode to remove tape from the TV/VCR/DVD.
3.SKIP Buttons (for DVD)[R3Sl
17.
Remote sensor window
Press once to skip chapters or tracks to a desired
18. HEADPHONE Jack
point.
Press and hold to change forward or reverse playTo connect headphone (not supplied) for personal
back speed.
listening.
4. PLAY Button [TV/VCRR26/ DVDR37]
19. VIDEO input Jack
Stalls playback of the disc or tape contents.
Connect to the video output jack of a video
camera or VCR.
-9EN
-"-37
IC29
- TV/VCR/DVD
,
REAR
=
=
=
PANEL
=
=
=
=
- [Fig.3]
0
=
I Ill
00000
Ill
/_
\
@
L......J
I
46
_
48
47
20. AUDIO L/R input Jacks
Connect to the audio output jacks of a video
camera or VCR.
31. MODE Button [DvD P.411
Activates program playback or random playback mode.
32. SEARCH MODE Button [DVD R391
Press to locate a desired point.
33. AUDIO Button [DVD R421
Press to select a desired audio language
mode.
21. Cassette compartment
22. PICTURE Button
Press to adjust the picture.
23. Number Buttons
TV Mode:[Rl5l
Press two digits to directly
chmmel,
Remember
channel.
access
34. SUBTITLE Button [DVD R421
Press to select a desired subtitle
the desired
35. REPEAT Button [DVD R421
Repeats playback of the current
or track.
to press a "0" before a single digit
+100 ButtonPress to select cable channels which are equal or
greater than number 100.
DVD Mode:
Press to enter the desired numbel:
+10 ButtonPress to enter the desired numbers whMl are
kmguage.
disc, title, chapter
36. ANGLE Button (DVD mode) [DVD R421
Press to change the camera angle to see the
sequence being played back from a different wlgle.
37. A-B REPEAT Button [DVD R40]
Repeats playback of a selected section.
38. RETURN Button
Returns to the previous operation in the DVD
setup mode.
39. ENTER Button
equal or greater than number 10.
24. PAUSE Button [TV/VCR R26/ DVD R381
Pauses the current disc or tape operation.
25. SPEED Button [TV/VCRR30]
Press to choose the desired recording
SP/SLR
or sound
Press to accept a setting.
40. Arrow Buttons
TV/VCR Mode:
Press to select a setting mode from the menu on
the TV screen.
Press to select or adjust from a particular menu.
DVD Mode:
Use when making settings while watching the
display on a TV screen.
41. DiSC MENU Button [DVD R371
Displays the menus in the DVD.
speed:
26. C.RESET Button [TV/VCRR281
Press to reset counter to 0:00:00.
Press to cancel a setting of timer program. (See
page 33.)
27. DISPLAY Button
TV/VCR Mode:
Display the counter or the current chwmel number
and current thne on the TV screen.
DVD Mode:[R431
Displays the current status on the TV screen for
checking purposes.
28. $ETUP Button [TV/VCRR15][DVD R44-46]
Press to enter or exit the TV menu or DVD setup
mode.
42. V. SURR (VIRTUAL SURROUND)
Sets virtual surround on/off.
43. MUTE Button
Mutes the sound. Press
Button [DVD R421
it again to resume sound.
44. SLEEP Button [TV/VCRR341
Sets the Sleep Timer.
45. SELECT Button
Press to switch TV/VCR and DVD mode. You can
see the mode (TV/VCR or DVD) on the front
pwlel indicator.
29. TITLE Button [DVD R371
Displays the title menu.
30. CLEAR Button
Resets a setting.
10
EN
IC29
46. ANT. in Jack
Connect to an antenna, cable system, or satellite
system.
47. Power cord
Connect to a stmMaM AC outlet (120V/60Hz).
NOTE: Remove the power coM from the hook to
avoid breaking a wire before you connect
to a standard AC outlet.
48. COAXIALdigital audio out Jack
Connect tu the digital input of an external
amplifier or decoder for DVD audio only.
PRLPARA [
}R [!SE
Sa_llelit_B°(XN;rt
supplied)
_/'---_
_
From .Cable System or
From Cable
--
System
I
:VHF Antenna (Not supplied)
supplied)<::C]}_
Crl IL_V_
I
it will
be necessary
UHF Antenna
/
(Not supplied)
I
qt
[Fig. 4]
--_
_
or
Flattwin-lead
cable
:_[,_t':;'_4'[
areas
"[
|
[[=_H
,_ ,H
/Combiner
Cable(Not
][n some
_/2F/UL_lLdt)enna
_
.......
to use an outdoor
( (?f_(VfT#('Tk, 7/
, ........................
v, #_
>
',
*a
',
antenrla.
( ,S}VLE W?H :;'Of'FT C .Ut W}U+_77iJTff
[ U(,_(.FL,_ !U'#SL#<,77_
J7'0%
If your cable service supplies you with a converter
box or if you use a satellite system, you cgm use the
basic connection shown in the illustration.
Use this connection if your cable system connects
directly to your TV/VCR/DVD without a converter
box.
By using this connection
bled channels. However,
made with the converter
By using this connection you ctm:
1) Use the TV/VCR/DVD remote to select chgmnels.
means that channels cannot be changed using the
TV/VCR/DVD
Remote Control. Unattended
timer
recording is limited to one channel at a time.
2) Program one or morn unscrambled channels for
Automatic Timer Recording.
NOTE: This TV/VCR/DVD will ONLY record and
view the same chtmnel.
you can also record scramchannel selection must be
box or satellite box. This
Antenna/Cable Connections
Continued on the Next Page.
11
EN
IC29
TO RECORD A SCRAMBLED/UNSCRAMBLED CHANNEL
1. Set the TV/VCR/DVD channel selector to the output channel of the Cable Converter Box or Satellite
Box. (Ex. CH3)
2.Select the channel to record from your Cable
Converter Box or Satellite Box.
1)Open the battery compartment
cover by pressing
the cover on the remote unit in the dhection of the
afro w.
2)Inser_ 2 "AA" penlight batteries into the battery
compartment in the direction indicated by the
polarity (+/-) markings.
3)Replace the covel:
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 82(I-4(I of the
NEC that provides guidelines for proper grounding and, in pallicular, specifies that the cable
ground shall be connected to the grounding system of the building as close to the point of cable
ent U as practical.
When using an external input signal (another VCR or
video camera), connect the player's audio/video output cables to the AUDIO L/R IN/
VIDEO IN jacks of your
AUX
TV/VCR/DVD. Then press the
CHANNEL button _, or _r until
"AUX" appears on the screen.
When you watch a program recorded on an another
source (VCR or video camera), use the audio/video
input jacks on the front of the TV/VCR/DVD.
Connect the audio/video output jacks of another
source to the AUDIO L/R grad VIDE() jacks of this
TV/VCR/DVD.
Then press the CHANNEL button _, or _" until
"AUX" appears on the screen.
NOTE:
,, When you connect a monaural VCR 0mother
source) to this TV/VCR/DVD, connect the Audio
output jack of the monaural VCR (another source)
to the AUDIO L jack of this TV/VCR/DVD. The
audio will output in both L and R channel equally.
To the audio
,; output jacks
[Another source] _
HDDPF_E VIDEO
ii
outputjack
L-AUDIO-R
AudloNideo
I coaxial cable
(not supplied)
-[Front of the
TVNC R/DVD]
[Fig. 51
12
EN
IC29
Use an audio coaxial digital cable available at retail for the audio connections,
Connecting to tm amplifier equipped with digital input jacks such as MD Deck or DAT Deck,
_
Amplifierequippedwithdigital
inputjacks,MD deck,
DATdeck,etc. ] _ _ ]
! u _!
_
To DIGITAL AUDIO OUT
To COAXIAL DIGITAL
(PCM/BITSTREAM)
COAXIAL jack
(only DVD AUDIO OUT)
,4]z>AUDIO INPUT jack
[Fig. 61
NOTES:
,, The audio source on a disc in a 5.1 channel Dolby Digital surround format cgmnot be recoMed as digital
sound by ml MD or DAT deck.
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Owner's Mgmuals for the components to be connected to the TV/VCR/DVD.
,, Set Dolby Digital to OFF for audio output in the setup mode. Playing a TV/VCR/DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
13
EN
IC29
If using this TV/VCR/DVD to play a DVD disc in a 5.1 ch_umel Dolby Digital surround format, the
TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hooking the player up to a Dolby Digital decoder, you ctm enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.
Use audio coaxial digital cables available at retail for the audio connections.
speaker
(left)
Front
(right)
speaker
_)
Front
Dolby Digital
decoder
l
Surround
_
24'_412_
_l._:_
_
@a_
•
Jm
_
To COAXIAL DIGITAL
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
AUDIO INPUT jack
COAXIAL jack
Surround
(left)
_,
_lB_©
speaker
'}
Subwoofer
(right)
l,
[Fig. 71
NOTES:
® Be sure to turn off the power to all components in the system before connecting another component.
,, Refer to the Owner's Manuals for the components to be connected to the TV/VCR/DVD.
* If connected to a Dolby Digital decoder, set DOLBY DIGITAL to ON for audio output in the setup mode.
(See page 45 to set DOLBY DIGITAL to ON.)
,, Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup
mode. Playing a TV/VCR/DVD using incorrect settings may generate noise distortion, _md may also damage the speakers.
Manufactured
trademarks
under license from Dolby Lab0ratoriesl
"Dolby"
and the double-D
symbol
are
of Dolby LabOratories:
- 14 -
EN
IC29
SE[
[!P
)R[!SE
[TV/VCR]
[TV/VCR]
Plug the TV/VCR/DVD
standard AC outlet.
NOTE:
The TV/VCR/DVD clock must be set correctly before
VCR timer recording is possible. It is suggested that
the clock be set mmmally when first setting up the
TV/VCR/DVD. Then, set to [ONI the auto clock setring which will periodically correct the setting if necessa U.
NOTE: If you cannot receive a smfion with time
signals, auto clock setting cannot be performed. Use
manual setting only.
power cord into a
® If some digits appear in the comer of
the screen, press the POWER button without
unplugging the power cord.
Make sure ...
• Pless select bu_on to select TV/VCR mode, or m_d®/A}TOCLOCK
to ON/
<%
Press the Arrow button _ until
"AUTO CLOCK tONI" appears.
When unplugging the AC cord or if there is a power
failure for more than 3 seconds, you may have to
reset the clock.
7?? C::,$is, Y;£ [LO:£
S£77iU /G
Make sure ...
• The TV/VCR/DVD is turned on.
• Confirm the TV/VCR/DVD is receiving a RF
(Radio Frequency) signal from either an antenna or
cable system connection using the ANT. terminal
on the mar of the TV/VCR/DVD.
NOTE:
:%(;
3 B_:_,g
_sAUTO OLO©K C/{ SEARCH
Press the Arrow button V to select
_<,._o_oo_
"AUTO CLOCK CH SEARCH".
AUTO CLOCK
[ON]
Press the ENTER button.
_................
MANUALCLOCK SET
* The TV/VCR/DVD is now
o_,
_o<
seamhing for the station which
contain the auto clock set signal.
The search for a signal may take up to 2(I
seconds per channel.
* "_ _" appears at the lower left of
............ _o.
the screen when the search has
ended.
- Auto Clock station- write down
the number(s) that appear on the
screen. These are the auto clock
station(s) in your area. See step [41 on page 17.
- If no number(s) appear on the TV screen, them am
no stations in your area which contain the Auto
Clock signal. Auto Clock Setting is not possible.
Please use Manual Clock Setting on page 17.
Press the SETUP button to exit the screen.
If you want to change the clock,
l)Follow steps Ill _md [2].
2)Select where you want to change using the Arrow
button _.
3)Enter correct numbers using the Arrow- button
or Y.
4)Press the SETUP button on the remote control to
stm_ the clock.
PLEASE NOTE:
......
If there is no local PBS station in your area or on
your cable system, select "AUTO CLOCK" and
press the ENTER button to turn [OFFI this function.
Then you can manually adjust the clock.
16
EN
IC29
NOTE: During Auto Clock CH Search, the picture
may be distorted, This is normal,
[TV/VCR]
4F E_®__t_÷ char'me _m'_be/'sat costa r_9tse
Auroras cCockS®h_gS{_sa
Press the SETUP button on the remote control.
Press the Arrow button at or 'V to
select "SETTING CLOCK".
....
Press the ENTER button to entel ...............
"SETTING CLOCK" menu.
o_.......
Press the Arrow button _" to select
o_,o, to<
"AUTO CLOCK CH".
..........
Press the ENTER button or the
.............
Select this feature and the TV/VCR/DVD's clock
automatically will advance one hour in April, then
reverse one hour in Octobec
When Daylight-Saving Time is ON, the clock will
chwlge automatically as follows:
,, First Sunday of April : At 2 AM the clock immediately changes to 3 AM. Any timer programming
you have set to occur between 2 AM and 3 AM
will not record.
TIMER pR©GIqAMMIN@
SETTING
CHANNEL
V-CHtp
CLOCK
SET UP
SET UP
LANGUAGE
ZERO
Arrow button "ql or _ until you
locale Auto Clock Set station number. See step [31 on page 16.
Press the SETUP button to exit the
screen.
5r -r
c
[ENGU$H]
R ETtiIqN
,, Last Sunday of October : At 2 AM the clock
hnmediately changes to I AM.
Make sure ...
,, Press the POWER button to tuna on the TV/VCR/DVD.
2_;ogkO_o_£%
_2_o_'_%Tt _
o_,
Eo_
' S_,es S_;:/',G CL,OCK
Press tl_e SETUP button on tile
he _V/VC_{CNL}
....
T_M EI:t pRO°
renlote
Once the TV/VCR/DVD is turned off, it will periodically check and set the correct date and time.
contrc,
l.
PICTURE
S_]7[NG
CHANNEL
Press the Arrow button at or V to
point to "SETTING CLOCK".
Then, press the ENTER button.
Press the Arrow button at or V to
point to "D.S.T.".
Then, press the ENTER button until
[ONI appears.
_ii,_
Ex the 3ay g:_Sav
Press
tile SETUP
button
RAMMING
CONTROL
CL©OK
S_T tip
ti_'°_
LANGUAC_E{ENGLISH]
....... _o_
' .........
V-°HIp
SET
UP
ZERO RETURN
(
_,,_o_oo_
_[ .........
_o_
[ ...........
_0_
[" ............. *°_....
AUTO
CLOCK
MANUAL
CIq
CLOCK
S EARGlq
8_
t
_9S _se_o<:e
on the renlote
control
to
return to TV mode.
?'(_ (' kA;( £f
T/Wli
?'W/, _/£SJ_£SGHXsSAW/Y{/
Repeat steps [11 to I21, select [OFFI using the
ENTER button.
17
EN
IC29
]TV/VCR ]
[TV/VCR
You can program the tuner to scan all the channels
you receive in your area.
NOTE: Channel memo U programming is NOT
needed when connected to a cable box or satelfite
box. Just select the TV/VCR/DVD channel selector
to the output channel of the cable box or satellite box
(Ex CH3). Then select tile chzumel to be viewed on
tile Cable Box or Satellite Box.
Make
The channels you no longer receive or seldom watch
can be deleted from the memory. (Of course, you
c_madd tile deleted channel into tile memory again.)
.............
remote
* Pless the POWER bulon to mm on the TV/VCR/DVD.
Press the Arrow button _, or V to
point t( CHANNEL SET UP ........
Then, press the ENTER button.
)
''
•
_,
....
prcruR=
coNsRoc
T_M Ilq
=
control.
Press the Arrow button A or T to
point to "CHANNEL SET UP".
Then, press the ENTER button.
sure ...
]/, ..... ............. I;=. £,_o,,,,Is.=JP
Press the SETUP button on tile
relnote control,
,g]=i
Press the SETUP button on the
....
T_IdER
I_IOG]RAMMIII
_o•kia_CLOCK
oo_r_o_
SE•TING
GIqANNEL
SET
LIp
u_=,_s_,ki_
v CHtP SET kip
o_,,o=.........
_o<_
.......
ZErO RETtlRN
,.........
pROGRAMMING
8ETTING
CHANNEL
point to "ADD/DELETE CH".
Press
the ENTER
button._, or V to
Press the
Arrow button
CLOCK
SET kip
vki=_===_o_
CSHIpSET UP
to_
ZERO IETIRN
•.........
LANOUAGE
IENGLFIIq]
.................
I" _°°'°===_=°<°_'_
2 [),egis g>,Io ch p_ogi',_ n_r_it'_g
Press the Arrow button _, or V
(
Press tile Arrow- button _ or T to
o=_===_==•ki_ until your desired channel number
point to "gUT() CH PROGRAM .............
_o_,_
appears. (You can also use tile
0s
MING".
.................
number buttons or the CHANNEL
..........
Then, press tile ENTER button.
•, or _ button to enter it)
The tuner sczms and memorizes all
(Example: CH8)
the active chmmels in your area.
,, When selecting cable channels which are higher
thgm 99, press the +100 button first, then, press the
last two digits. (Example: to select chmmel 125,
first press the +100 button then press "'2" and "5").
The tuner stops on tile lowest memorized channel.
,,
You
must proceed single-digit ch_umel numbers
,, When AUTO CH PROGRAMMING is actiwfed
with a zero (Example: 02 ... 09).
where them is no TV signal input, "NO TV SIGNALS" will appear on the display after the completion of the channel scanning.
Press tile ENTER button. The channel number
* Tile TV/VCR/DVD may recognize TV chzmnels to
be CATV chzmnels by the receiving conditions. ][n
chmlges to light red. The ch_mnel is deleted fiom
this case, try auto ch programming again in the fine
memory.
receiving conditions.
* To delete another channel, repeat steps [3] and [41.
,, If you press the ENTER button again, tile ch_mnel
is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
_ Exi _e c_s_sse/ se'{up _soe,_s_* _ '_: (V_. :I!!I!CON'_R
Press the PICTURE button on the remote control.
Press the Arrow button _ o1 V until desired control
is displayed.
BRIGHT
CONTRAST
COLOR
TINT
DDDDDDD_DDDDDDD*
SHARPNESS
NOTES:
• If you press the CHANNEL button _. or 'V in the
DVD mode, you czm change the TV channels.
Even if you turn off the TV/VCR/DVD in the
DVD mode, when you turn it on again, it will go
into the TV/VCR mode.
Press the Arrow button -_ 1271
_ to adjust to your
desired level.
BRIGHT
CONTRAST
ITV/VCRI
Magnetism from nearby appliances and speakers
might affect the color of the TV picture.
COLOR
to pale
to brilli_mt
TINT
SHARPNESS
to puqfle
to soft
to green
to clear
* If there is a power failure
TV/VCR/DVD
will retain
ture.
If this happens, move this TV/VCR/DVD away from
the appliance. If the color is still not correct, unplug
the power cord, then plug it in again 30 minutes later
or
Arrow button -_ Arrow button
to decrease
to increase
brightness
brightness
to decrease
to increase
contrast
contrast
of any kind, the
its memory for this fea-
SO.
- 19-
EN
IC29
]
Seec
[TV/VCR]
CAPT O_,
•..........
Press the SETUP button on the
remote
TIMER
PROGRAMM_N@
...........
CHANNEL
SET
UP
USER'S SET UP
control,
v-oHtp
sm UP
LANG L/AG_
EN@ U ,qH]
GAPT_©_
OgF
....
You can view specially labeled (cc) TV programs,
movies, news, pm-mcoMed tapes with either a dialogue caption or text display.
CAPTION mode: By choosing the caption mode, you
can watch dramas, movies mid news while captioning
the dialogues and the contents of news.
TEXT mode: By choosing the text mode, you ctm
watch half screen text hfformation if you want.
1-2: You may get these captions or text information
by selecting either "1" or "2". Caption "2" is used,
usually for a second ltmguage if available.
Press the Arrow button A or 'V to
point to "CAPTION".
NOTE:
Press the SETUP button on the remote control to
return to TV mode.
* Automobile ignition noise
,, Electric motor brush noise
® Weak snowy reception on TV screen
,, Multiplex signal reception displaying picture
ghosts or ahplmle flutter.
* Playback of poorly recoNed or worn VCR tapes.
NOTE:
If the TV/VCR/DVD displays a
black box on the TV screen, this
(
meals that the TV/VCR/DVD is /1
set to the TEXT mode. To clear
/
screen, select [CAPTION I l, [CAP-/
[
TION21 or [oFF].
Make sure ...
,, TV/VCR/DVD's
TIME
SEARCH
2 Sect/, you desk;_ o;<, yO$
button on the remote
_'_( ,%7":7'
Se}®c V_C{{PSETUP'
Press the SETUP button on the
remote control.
Press the Arrow button A or V to
select "V-CHIP SET UP". Then,
press the ENTER button.
2
Press the SETUP
exit the screen.
[wEw]
[BLOCK]
E_oo_
Selection
G
Rating Category
General Audience
Explanations
PG
PG- 13
Parental Gui&mce suggested.
Unsuitable for children under 13
R
NC-17
Restricted; under 17 requires accompawing parent or adult guardian
No one under 17 admitted
X
Mature audience only
;5; _i! tt'_eV©_[._sett_9
r ode
Press the SETUP button on the remote
exit the screen.
control
to
Note: If you unplug the power code or power failure
occurs, the changed access code will be lost and will
return to default (0000). Change your access code
again as necessary.
,, When you select the rating category and turn it
[BLOCK], the higher rating will turn [BLOCK]
automatically.
Also, the lower rating will turn
[VIEW] automatically.
• When you tm-n "G" to [VIEW], then all ratings
will turn to [VIEW] automatically.
- 22 -
EN
IC29
You ctm record
or listen
to a program
in MTS
stereo.
[TV/VCR 1
When you play a VHS tape, or receive a broadcast
on the TV/VCR/DVD tuner channel you are watching,
the status shown below will appear when you press
the DISPLAY button on the remote control.
1) When a program is broadcast in stereo, STEREO
appears on the TV screen.
2) When a program is broadcast in second audio,
SAP appears on the TV screen.
3) When a program broadcast both in stereo mid second audio, STERE() and SAP appear on the TV
screen.
NOTE: Although a program may be broadcast in
both stereo and second audio, you cannot
record in both stereo and second audio at
tile same time.
4) While the TV/VCR/DVD is set in HIFI stereo
mode mid playback mode. HIFI appears on the
TV screen. While the TV/VCR/DVD is set in
monaural(MONO) mode, HIFI disappears from
the TV screen.
¢
PLAY I_
4) m
12:00AM
-HIFI
OH 123
m 2)
1)
, SP
SAP
COUNT
0:00:00,
Second Audio Program, which means your
program, can also be received in a second
language
HIFI
or sometimes
High Fidelity
than standard
a radio station.
which produces better
stereo TV/VCR/DVDs.
NOTE: If you play non-HIFI tapes while the
TV/VCR/DVD is set in HIFI, HIFI will
disappear from the TV screen _md the
TV/VCR/DVD will play automatically in
monaural.
sound
[TV/VCR
Type of broadcast
Display on
the TV screen
STEREO/SAP
Regular
-None-
SELECTION
-Invalid-
(monaural audio)
Stereo broadcast
STEREO
-Invalid-
SAP
STERE()"
Bilingual
broadcast
Hi-Fi audio track(2-channel)
L-channel
R-channel
SAP*
Stereo & Bilingual
broadcast
STEREO
SAP
Normal
audio
track
Mono
Mono
Mono
L
Main audio
program
Sub audio
program
L
sub audio
program
R
Main audio
program
Sub audio
program
R
sub audio
program
L+R
Main audio
program
Sub audio
program
L+R
sub audio
program
*You must select the recording mode in TV AUDIO [STERE()] or [SAP] when you record a broadcast.
23
EN
IC29
ITV/VCR]
Make sure ...
• TV/VCR/DVD
??)
SL/
C
7Y) 5E£E( 7 MONO MODE
power must be turned on.
H __' MODk
Press the SETUP button on the
...._.......
control.
V-CHIp
Press
........
tile Arrow
CLOCK
CHA"NEL
SETU_'
USER'S SET UP
Press the Arrow button A or 'V to
point to "USER'S SET UP". Then.
press the ENTER button.
,,_
Press the Arrow button a, or '_ to point to "USER'S
SET UP".Then, press the ENTER button.
2) Press the Arrow button _, or 'V to point to
"VCR AUDIO".
3) Press the ENTER button until [MONOI appears.
4) Press the SETUP button on the remote control to
return to TV mode.
TIM ffFt pROGRAMMING
SETTING
re mote
You cgmchange the selection to "MONO" if you
want to listen to HIFI tapes in normal audio playback.
1) Press the SETUP button on the remote control.
_ i- _
button
point to VCRAUDI
SET
UP
_A_OA_
_._u_._
CAPTION [OFF]
T.........
ZERO
INDEX
RETURN
SEARCH
,
A or Y to
) .
_.TA_
iota
=.........
Eo<
VOR AUDIO
TV/_UD_O
...... HIF_
[S_-REq
AUTO
RETURN
[OIF]
?Y? 5L'?,E( T STt;£h;O
5A
0£ MOh,eect
Press the Arrow button _. or V to
point to "USER'S SET UP".
_NDEX SEARCH
/
_
4_ R;_ {'e _m ®TV
mode
Press the SETUP button on the remote
return to TV mode.
Se/ec
TV AL/DO
Press the Arrow
control
to
........._A,_OA_
_,%_,_._
CAPT[©N [OFF]
T,.=_EA=O_
point to"TV
button
u_=,......
_, or T to
AUDIO".
NOTES:
_'Normally, "HIFF' should be selected for playback
with HIFI sound.
® When you play non-HIF[ tapes, the TV/VCR/DVD
will play automatically in the monaural mode.
" The TV/VCR/DVD records automatically MTS
broadcasts in HIFI stereo sound unless you select
SAP mode recording before you begin recording.
((_ Select [SI'EREO} [SAP] o_ [I4:0DIO]
Press the ENTER button until [STEREOI, [SAP], or
[MONOI appears.
_ To,_e{_ > toTV mo,©'/
renlote
Rewind or fast forward the tape to the beginning
point at which you wgmt to review.
............
TIDIE_
control,
pFtOG_AMMING
sew_sec_oc_
Press the Arrow button at or V to
point to "TIME SEARCH".
Then, press the ENTER button.
GIqANNNL S_r tip
OSCars _BT UP
_o.,_,ti_
_=o........
=_,o_°<
T_MESE_C_
LANGUAG_
[_N@L_SH]
_NI)EXSEA_CH
Press the (_'.RESET button repeatedly.
Press the Arrow button at or 'V unfilI,%{:{_U=
!
,,,} Begi_ /÷;o ;/i g ol p/ayba:',k
Press the RECORD or PLAY button.
Press the STOP button when recording or playback is
completed.
_5 "i']}ac ivse ZE/::_O I_II[YLFI#I s%o@s:_
Press the SETUP button on the
(
control,
I
50 minutes)
[
If you wish to cancel the Time
Search at this point, press the SETUP button on the
remote control.
.........
TIMER
retllote
your desire(J time appears.
[
(Example: 2:50" stands for 2 hours/
plROGRAIdMIIG
s_w_
c_oc_<
GHANNEL
tiSE_'S
_T
4_ Beg_ Ti'_;e Sea_c/
tip
SET UP
Press the Arrow button at or V to
_o=,_o_
LAN_UAQ_ [EN_USH]
point to "ZERO RETURN".
z_=o.......
=Fu==_°_
T_MESEARCH
Then, press the ENTER button.
'..........
The counter will appear on the TV screen.
The tape will automatically stop when the counter
returns to 0:00:00.
By pressing the Arrow- button "9 or _, the
TV/VCR/DVD will rewind or fast forward to the
specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
I/I
ITV/VCR]
The Time Search function makes it possible to quickly adwmce the tape to your desired position shnply
by entering the exact amount of playback time you
want to skip.
NOTES:
+,i,
'
2"
;
7HI'
....
g
¢ ;4£_
_,_ I
II'L,;
Press the STOP/EJECT
button on the TV/VCR/DVD
or the STOP button on the remote control. This will
delete the selected time.
,, Time Search cgm be set up to a maximum of 9
hours 5(1 minutes (9:50) by 10 minutes at a time.
- 28 -
EN
IC29
'_
'¢
"
Press the SETUP
contrc, l.
ITWVCRI remote
button on the
................
CHaNNELUSER.S
set
SErupUO
SETTING
V-GHtp
This feature provides a method of indexing the starting point so that it can be easily returned to in either
fast forward or rewind mode.
,, The
the
the
* The
Press the Arrow button A or _' to
point to "INDEX SEARCH".
Then,
press the ENTER button.
index mark will be made automatically
when
REC button is pressed. It will also be marked at
starting point of Timer recording mid OTR.
index mark will not be recorded if the PAUSE
_.; >u: *:¢,,A_
1
[ENGUSH]
/
(Example:
03 ' for 3 programs)
,_ The Index Search mode will be
/
[
if the procedures
are not activated
in 30
,3 }3eg _nde× S®_:)_,ch
Press the Arrow button _1 or _. The TV/VCR/DVD
begins rewinding or fast forwarding to the beginning
of desired program.
NOTE: Every time an index signal is skipped, the
number in the program indicator decreases by one.
m
r4
3
2
INDEX MARK
UP
RETUIqN
of
CURRENT PLAYBACK PROGRAM
!
ZERO
_,v,/'gbeg
want
toski!,
a!?pears.
canceled
seconds.
Example:
You are watching program number 4 and
want to fast forward to program number 7. You
must skip three programs.
Beginning of tape
SET
o_,,o_co<
TVNCR ,qETUp
•.........
_NDEX
SEARCH
LANGUAGE
i,_
Press the Arrow button A. or V until(/'_°_ ....
the number of programs that you
|
;
button is pressed and released during recording.
,, The time gap between making the index marks on
the tape should be greater than 1 minute for SP
recording, 2 mhmtes for LP recording and 3 minutes for SLP recording.
,, In some cases, the index mark at the beginning
video tape cannot be detected.
CLOCK
End of tape
1
2
When the preset program is reached, the
TV/VCR/DVD will start playback automatically.
* A video cassette must be inserted in the
TV/VCR/DVD for this function to work.
3
The number of Index Searches can be set up to 2(1.
This function will not operate in the recording mode.
When you want to cm_cel the Index Search while
in progress, press the STOP button.
SPEC[A
FEAT[!RES
ITV/VC I
This shows the elapsed recording or playback thne in
hours, minutes, and seconds. (The displayed time will
not change on a blank tape or blank portions on the
tape.)The "-" indication will appear when the tape has
rewound fmlher than "0:00:00" on the tape counter.
[TV/VCR ]
,, When the end of a tape is reached during recording, playback, or fast-forward, the tape will automatically rewind to the beginning. After rewinding
finishes, the TV/VCR/DVD will eject the tape and
turn itself to off.
,, This function is operative when Repeat Play is set
to the [OFFI position.
® The tape will not auto-rewind during timer recording or One Touch Recording.
- 29 -
EN
IC29
Make sure ...
• TV/VCR/DVD power must be turned on.
® Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to
the point at which you want to begin recording.)
NOTES:
• This TV/VCR/DVD will ONLY record and view the same channel.
® This TV/VCR/DVD cannot record the contents from the built-in DVD.
ETv/vcR]
You can ONLY watch the same TV program that is
being recorded.
Press the number buttons ml the
remote control or the CHANNEL
button _, o1 V.
Remember: If the TV/VCR/DVD is connected to a
cable box or satellite box, the TV/VCR/DVD must
be on CH3 or CH4, then the channel to be recorded
must be selected on the cable box or satellite box.
xs_:Seect
t'_e ta:}e
s/:Hi:,ed
Press the SPEED button to select
the desired tape speed (SP/SLP).
[TV/VCR 1
Press the PAUSE button to tem( .....
porarily stop recording.
Press the PAUSE or RECORD button to resume recording.
NOTES:
_
® After five minutes, the
TV/VCR/DVD will automatically switch to the
Recording mode to prevent tape damage.
® If "CLOSED CAPTION (ON)" is selected, the OnScreen Display will appear for 5 seconds, then disappeal:
[
sp
Press the RECORD button.
S ,_ ,
[_Ec
sp
Press the STOP button when recording is completed.
- 30 -
EN
IC29
ITV/VCRI
This function enables you to set a recoMing length
simply by pressing the REC/OTR button on tile
TV/VCR/DVD.
Make sure ...
Push(es)
1 push
2 pushes
3 pushes
Display
0:30
1:00
4,
17 pushes
• TV/VCR/DVD power must be turned on.
• Insert a cassette tape with its erase prevention tab in
place. (If necessary,, rewind or fast forward the tape
to the point at which you want to begin recording.)
NOTES:
® This function CANNOT be done from the remote
control.
Recording length
"normal recording)
30 minutes
6(1 minutes
4,
8:00
480 minutes
[TV/VCR
]
You can make copies of video tapes made by friends
or relatives for your enjoyment.
You can not copy a DVD to a videotape.
• RecoMing starts immediately when tile REC/OTR
button is pressed.
• When the REC/OTR button is pressed 18 times, the
TV/VCR/DVD returns to the Normal Recording mode.
® To stop the OTR operation, press the STOP button
on tile TV/VCR/DVD or on the remote control.
• To show the remaining time, press the DISPLAY
button on the remote control so that "OTR"
appears on the TV screen. (It will show up
momentarily then disappear.)
,, Recording stops when 0:00 is reached.
WARNING: Unauthorized recordings
copyrighted video tapes may be an
infringement of copyright laws.
of
Connect your TV/VCR/DVD grad a Source (Playing)
VCR using the following diagram.
[Fig.e1
• Please note that in the SLP mode maximum recoMing time, assuming the tape is started at the beginning, is 8 hours using T-160 (or 6 hours using T-120).
• If the tape runs out before the end time, the
TV/VCR/DVD will switch to the Stop mode
immediately, ejects the tape and tm-ns itself off.
,, If you press the POWER button during OTR, the
TV/VCR/DVD continues recording until the selected length is reached.
[Ex: Source (playing)
Audio/Video
adapter cable
(not supplied)
rder]
)Inser_ a pro-recorded video cassette into the Source
(Playing) VCR or camcorder.
2)Instal a blank video cassette, or one you wm_tto
record over, into the TV/VCR/DVD's cassette
compartment.
3)Press the SPEED button on remote control for the
TV/VCR/DVD to select the desired recording
speed (SP/SLP).
4)Press the CHANNEL button _, or '_' on the
TV/VCR/DVD until "AUX" appears on the screen.
5)Press the RECORD button on the TV/VCR/DVD.
6)Begin playback of the tape in the source (Playing)
VCR or camcorder.
Press the number buttons on the remote control or
the CHANNEL button A or V.
Remember: If the TV/VCR/DVD is connected to a
cable box or satellite box, the TV/VCR/DVD must
be on CH3 or CH4, then the channel to be recorded
is selected on the cable box or satellite box.
Press the SPEED button to select the desired tape
speed (SP/SLP).
_3 I>!@
+ '; , I I {
Press the REC/OTR buttOllOllthe
(o,=<=:=0_
TV/VCR/DVD as many times as
needed. The recording length will be
determined by the number of times
you press the REC/OTR button. Each _
additional push will increase the
recording time by 30 minutes, it is set up to 8 hours.
NOTE: For best results during copying, use the
TV/VCR/DVD's front panel controls whenever possible. The remote control might affect the source
(Playing) VCR's playback operation.
7)To stop copying, press STOP/EJECT button on the
TV/VCR/DVD, then stop the tape on the source
VCR or camcorder.
/
31
EN
IC29
'J S_J<< T EV_PROGI_:$AA{@NG
Pressthe SETUP button on the
............
remote control,
s_,_ oLoo,<
UsEnrs SET UP
Confirm "TIMER PROGRAM_......... [EIqr_LFSH]
LANekiA@E
CAPTEOTq [OFF]
MING" is pointed by pressing the
,,=_,_=o.
_NDEXSEAnC:H
Arrow button a,. And press the
ENTER button.
TIMER
p£©GRAMMING
CHANNEL
ITV/VCR]
You may set the TV/VCR/DVD to stal and end a
recoMing while you are away. You can set 8 programs to record on specific days, daily or weekly
within a 1 year period.
lt_ the examl)le below, the timer is being set to record:
DATE:
July 4th, 2004
SETTING TIME: from 7:30PM to 8:50PM
CHANNEL:
CH61
TAPE SPEED:
SP
Make sure ...
• If a cable box or satellite box is connected with the
TV/VCR/DVD you will be limited to record only one
channel. And the channel selector on the
TV/VCR/DVD must be selected to the output channel
of the boxes CH 3 or CH 4 and then the actual channel to be recorded must be selected on the boxes.
• Clock must be set to the correct time and date
before setting the fimm:
,, TV/VCR/DVD power must be turn on to program it.
• Insert a cassette tape with its erase pmvenfion tab
in place. (If necessau, rewind or fast forward the
tape to the point at which you want to begin
recording.)
,, The channel you want to record is properly set in
adwmce. (See page 16.)
Avoid over lap of programs ...
There is a chmlce that a program will not be recorded. when programs overlap;
,, The program with an earlier start has priority.
,, Once the earliest program finishes, the overlapping
programs will begin recording in sequence.
• Tile illustration below demonsmfes the sequence
of recordings.
Program 1
10:00AM - 11:()()AM
Program 2
:):()()AM - 10:00AM
Program 3
:):30AM - 12:00PM
kip
,, If you have not yet set the clock, "MANUAL
CLOCK SET" appears. If so, follow stops [31 to
[8] on pages 15, 16. Then set the timer recording.
_2, 9clio{
VOlll desllfe
?
_O,
==,O=
s}o_l'81s
....
,
I
I _, = '-@,.
TIMI
/
R IROQIAMI_I,_G
...........
/
Press the Arrow button _. or_ to ]/
;--::
- /
select the desired program position.:]:! iliiii i_ i::iiii /
Then, press the Arrow- button_.
[ x :£::x :x x:xj
Press tile Arrow button _. or _ unfil( ................
the desired ch_mnel number
/ ...........
appears (Example CH61)
/ ; :: !:: :
_:;
;[_K X[ ilk
S_'l!s:<:
.....
o'_c_s ....
,, ,_[v tag
/eekl%, H_c< 'di/'g
For once recording :
TIMER PROQ_A_M_G
CH _AT_
Press the Arrow button _. (up)
until the desired (late appears.
1
E_@N _3
" i " ::
_..............
:
(Example: "7/04" for July 4th).
ii i
Then, press the Arrow button _,_.
:
For every day recording : To record a TV program
at the same time on the same channel every day.
(Example: Monday through Sunday)
until "EVRY DAY" appears.
Then,
press
tile Arrow
_.
Press the
Arrow
button button
, (down)
RecordingSequence
................
1
:: :,7:: :i :: ::
!°=_:.:
:_;?i!_'::
.:_ i="_ii="|j
X _JX 111 ill]
Program 2
g:00AM-10:00AM
fix iS
)
/
]
Then, press the Arrow button _.
[!=! !!!!!! !! :!i:iiI
Remember: If theTV/VCR/DVD
i
'
: : )
is connected to a cable box or satellite box, the
TV/VCR/DVD must be on CH3 or CH4, then the
chzulnel to be recorded is selected on the cable box or
satellite box.
Program 1
10:00AM-11:00AM
Program 3
9:30AM-12:00PM
SET
[iX X
=
=
=
i
I
I
9:00AM
=
=
10:00AM
"Recordlngpedod
11:00AM
/s SHADED
12:00PM
For weekly recording
: To record a TV program
the same time on the same c'hamwl every week.
(Example: every Monday)
Press the Arrow button T (down)
until "EVRY" zuld your desired
day of the w-eek appeal togethel:
Then, press the Arrow button _.
- 32 -
CH IAI_
,
/i
_@_
!i.% >=:..
at
_NO
i
EN
IC29
.:)
:e
D_3{_:DF_I<¢::::_
h©t
Ir
"r:MERPnOGnAMM_.Q h
|
Press the Arrow button A or T until[ ...........
tile desiredhourappears.
,,
_
-
"/D shse/t
,_ While setting a program; press the Arrow button
-_ to go back one step and enter the correct numbers using the Arrow button _. or T.
,_ After setting a program;
l)Press the POWER button.
2)Repeat steps [11 - [21 on page 32.
3)Press the Arrow button _ (or press tile Arrow
T_MER pI:tOGRAMMING
Press the Arrow button A or V
until the desired tape speed
T A ]'ROO,:£AM
_ _'T_ _!_'"_°
:: :'::::: :::: ::::::
9thep_og.,
,>6"
• Turn on the power of amplifier and :uly other components, if necessary.
Pess _eP_6)g_{b_.
®The power will turn on.
2
P es_:; ILe
OREH
on
OkO£i_E b_*t'_o/_ to open
disc
osdog 8'a?
IrI¢_U
DVD may contain menus to navigate the disc and
access special features. Press the appropriate number
buttons or use the Arrow buttons (V/A/'_I/I_) to highlight your selection in the DVD main menu and press
the ENTER button to confirm.
NOTES
• Select DVD mode by pressing the SELECT button on
the mmnte control. Then, operate the DVD functions.
®Unless stated, all operations described are based on
remote control use. Some operatkms cm_ be carried
out using the menu bar on the TV screen.
{_ Plsce L,(_ <;ho_s_mdisc n _he >:y, wih be
,II]¢I
<:,I
I_i
Ip
Pies_;
he
DISC/\A{!HU
bt_
on
• Tile DVD nlahl menu will appear.
2
4 P®ss the PLAY button.
• The tray will close automaically, and playback will
then start from the first chapter or track of the disc.
If the playback does not start automatically, press
the PLAY button.
• When you playback the DVD which a title menu is
recorded, it may appear on the semen. In this case,
refer to "TITLE MENU".
{_
P_ess }@STOP t:_Ao/s o
sq;;
/ tie les_<_es not ava abe
_'say appea'
3
_dsc_nes_:
asg(aqe
t'/easdobet
os theTV
says
_
abeosd"_et_so
sebt'/e
_;_y_'_bo
sceen
opt
ons
chapters
audo
Ion"/he
appest/ofseec,
opIossw
or>
,<,_(AQCl
a,_ ite[_ :st@lhc INTER b_£lo/: Io
co_?li_m sel odom
paybsck,-.
NOTES
®When fl:e DVD mode has been switched to the
Press the TITLE bqtior
TV/VCR mode, the DVD mode shuts down first _md
®The title menu will appear.
then TV picture and sound appears in about 4 seconds.
Similarly, when the P()WER button is pressed to tmn
off in the DVD mode, this mode shuts down first grad
_"_a}/appes
' on the °fV sctee_'_
then the TV/VCR/DVD's power is turned off.
®A "prohibited icon" may appear at (
_)
' e,:;,
, :5 AI'Iow
s _" '}_s < _s' £I,#_1/s>,]_ o
the top-right on the TV screen durselecl a_ iler% s_d the IHTll b_, ton to
ing operation, warning that a prn-|
coy}
s,wsseectos
hibited operation has been encnun- |
(S tS*dG UP+i 5 /N 75 '['SSLI V
tered by the DVD or the disc.
(.
With DVDs that use titles for playback program signals, playback may start from the second title, or it For DVD-Vs
®Press the DISC MENU butnn to call up the DVD menu.
may skip these titles.
®Press the TITLE button to call up the title menu.
During the playback of a two layered disc, pictures
NOTE
may stop for a moment. This happens when the 1st
Contents of menus and corresponding menu operalayer switches to the 2nd layer. This is not a maltions may vaW between discs. Refer to the manual
function.
accomptmying the disc for details.
/
- 37 -
I+--a_l
>Ii
lal=l
--
11
....
EN
01All
©u_gpayhsck
pesslheSTOPb_iou
• Resmne nlessage will appear oil the TV screen.
Po_s h_) pr/; _ a whet pa book w;;_s s_ opp,¢d.
• To cancel resume, press the STOP button twice.
® If turn off the TV/VCR/DVD,
resume function will
be cancelled.
7+ D!.'isg l>Iybi_ck
t_'®s_stl"e PALS{Y: I _tIon,
Playback will pause and sound will be reefed.
, .
i,+L l*.i_I O1,
©u_ sIil p ayback
Playback
Note [or using buttons on the main unit:
Press the PAUSE button, then, press {u_dhold down the
SKIP I_1_1/SEARCH _
buttons or the SKIP I'_I/
SEARCH -_1-_bulons on the TV/VCR/DVD for a few
seconds to begin Search in 1/16 speed of the normal
playback. Press m_dhold down again to ch_mge speed
to 1/8. Repeat this procedm'e to ch+u_geto 1/2.
p_ess the?PAUSE b_£to_s
will pause and sound will be muted.
PLAY buttot_
)_ /}_+w'i_gplayback,
press a_d hold dovs__ the
S@OoIsds
,S,,
Eats _,_}
_ .....
s#y
mS "od be_ bu o s_®es/e_the
Using the SEARCH
[}/,x ¢_g/s aybsck, press he
Use markers
disc.
appears,
Wi HiT_30 seco_ds
_e/ec a desired _'aok
_4eber
_4si_9 the ?,L_mbe but o_ss o_s}he
_er_,sote 0o_ !re,
For single digits press 0 first.
Playback will start at the selected
to memorise
your
favorite
places
p,=,,_,,.......,
u,>,,:_
:._>._,<
*<:a:_O,s,,I£<)©IE b, t; _ fou
_,,.,,,_
® The display
TV screen.
track.
Using the SKIP I_ _4
buttons
During playback, press the SKIP I_l_l button to move
the next track. Press it repeatedly
to skip subsequent
tracks. Press the SKIP I'_"_ button to go back to beginning of the current track. Press it repeatedly to go to
the previous tracks.
If the SKIP button is pressed while the playback is
paused, the playback will be paused again after skipping to the next track.
NOTE
The SKIP I_1"_ l_l
buttons are not available when
playback is stopped.
2,3
l['_e};;
,.;<,,Yes
c%, _g payb_ck
screen and Markers will appear
4 5,;;:_, ')*
<'_"
,
,= 9,
° ° ,=-,-
!!
8!p_IIIS
Or
""
@
81d
bl'ISi,lrl:)
on a
on the
Ibat
',-
,_
A tl ,_ ,,_=:ul=l_:lI
+_7_
iI
g=
i=_
6
122222221/II%IWIIIWI!£1/@I[/!@
II_I4_I/_II/(IIW_I;
_"
i,+0
?;g'
1{,'
' _)
I::.l
b-_t(
The Title or Track and elapsed
appear in the TV screen.
playing
time
will
,.,;,_.i¢:[_,A
[ll,,,Jl
I_,=l
I I ' I,,>
(, _>l,I(rl
I
_
:_,
,
d/Iril'l),It,l
_i
11
*,,
i
w
ii<<
r R_<}= + Bi
_
Ill
Z *i/,
i_/ii¢l
to exit,
EN
01All
SPECIAL
PI,AYBACK
F{!NCTI()N
REPEAT is available only during playback.
B£'PE;_ T 77TL_)!i'/ C_PTffT:_"
You may determine the order in which tracks will play.
Tosc
vaetberepea_/'q'_c
RK[BAT
b/_to_
@mi_g
obpres_,_ _e
psybsc
D <>a
.
_, .........
]U {{0_'/
l The PROGRAM screen will appear.
• The repeat mode changes as described below every
time you press the button.
[]
CHAPTER
_
curr_nt chapter repeat
[]
TITLE _[]
current t t e repeat
repeit off
L
.=
NOTES
®Repeat Title/Chapter is not available with some
scenes.
®The REPEAT setting will be cleared when moving
to other title or chapter.
B £'P E}4 T "_V_ CAf
Tosc
RK[BAT
vaetl:_erepea_/'q'_c
b/_to_
@mi_g
obpres,,_
psybsc
_e
.
• The repeat mode changes as described below every
time you press the button.
[]
TRACK
_
curr_nt track repeat
[]ALL
t/'r,_ k,, b®r
OFF
_[]
ent re d sc repeat
l
OFF
repeit off
JI
NOTES
• Repeat setting will be cleared when moving to other
track.
• Repeat playback does not [unction during repeat A-B
playback.
BEB+E_iT A-B
Press t°<_/;:;_£:Pg/_/T
i>,8 b_ <::,_a our
se_ ,+}>
a_'t}_9 pod&
• [] A- appears briefly on the TV screen.
:ho..
t's,_s>s
_e
KB/'Efq _ I:sl',
• Press the CLEAR button to
erase the most recelltly elltered
program.
3
#_ ",'t
_4':_,_
÷ms
_¢"
.....J_
the
PIRY
"
,,40, }'d/V¢¢ seeced
b_4tto_s to P_7
a
t}'@
the p_ ,,
NOTES
®Whte the program is being played back, the STOP
wnrks as follows.
Press the STOP button ouce and then the PLAY button again, playback will resta]l from the point where
the STOP button was pressed. (Program continued)
Press the STOP button twice a_d then the PLAY button
again, playback will restarl flv)m the track in the usual
way. (Program cleaed)
Up to 99 programs can be entered.
If you like to repeat the current track in the program,
press the REPEAT button repeatedly until []
TRACK appears during playback. If you like to
repeat the entire _]0£ogrampress the REPEAT buttou
repeatedly until IC;IALL appears during playback.
This shuffles the playing order of tracks instead of
playback in the sequence.
_ sop mode p'e:_,_s
_ e MODE/su{,::_ wee
RANDOM screen appears.
¢bos®Ys®_
p®_t
® [] A-B appears briefly on the TV screen, and the
repeat sequence begins.
B bel:!o_'_
2
9_'_:_ssthe P_,)/bu
to_/1o s_>M _a_do> p/_syback
NOTES
®The repeat A-B section cm, only be set within the cur- NOTE
If you like to repeat the currant track in the random
rent title (for DVDs), or current track (for audio CDs).
selection, press the REPEAT button repeatedly until
®Repeat A-B is not available with some scenes in DVD.
[] TRACK appears during playback. If you like to
Tu cancel the A point which was set, press the
CLEAR button.
repeat the entire random selection press the
REPEAT button repeatedly until [] ALL appears
Repeat A-B playback does not function during title,
chapter, track or all repeat playback.
- 40 - during playback.
EN
01AI 1
PI,AYING
A MP3
When a CD with MP3 files is in the TV/VCR/DVD,
the MP3 menu will appear on the TV screen in stop
mode.
DISC
PressdteSEAHO!,,
MODEbu
> ayback
Tile FILE LIST will appear.
2
Seec
adesred
'so
o_@sdng
us_%g }cA
ow bu/',
(&F%'} o s¢iecI @e
If a group is selected, press
the Arrow _. or ENTER button to go on to the track selec ....
tion screen. Press the Arrow
buttons (_/_') to choose a
track, then press the ENTER button.
® Press the Arrow button _ when you want to go to
the next hierarchy.
® Press the Arrow- button _ when you want to go back
to the previous hierarchy.
]
If a track is selected, press the ENTER button to stag
playing tracks. Starting from the one you've just
chosen the subsequent tracks will be played.
® Choose FIRST PLAY to start playback
from the
beginning of the listed tracks.
Press the TITLE button to return to the first item.
2 P_'ess5eSTOPb_ tos os_oppayback
NOTES
®Folders are ka_own as Groups; files are ka_own as
Tracks.
®MP3 files are accomDmied by [] icon.
Maximum of 255 folders can be recognized.
Maximum of 512 files can be recognized.
Up to 8 hierarchies can be created.
This player recommends the use of files recorded at
the below specifications:
®Sampling frequency: 44. l kHz or 48kHz
®Const_mt bit rate: 112kbps _ 320kbps.
NOTES
® Press the SEARCH MODE button to exit.
Some selections may take a while to be recognized.
This feature allows you to program
play in a desired sequence.
The PROGRAM
2
9_, ect ;s des
an MP3
disc to
screen will appear.
red tack
us/&r_ow }::,_._
-
® Press the Arrow button _ when you want to go to
the next hierarchy.
® Press the Arrow- button _ when you want to go back
to the previous hierarchy.
Press the CLEAR button to erase the most recently
entemd program.
_
4
8_>p,,;_,_4
sep 2
Tr_fmks you wan
Press
c
ps._ _>e seecled
s/%'
pay >t_u p_gram
she PLAY bs tos_ o s/_s_{ p_og am'ned
p aybsck
so/:/; so6
........
"_ _>es
......... IseMODf£b_
• RANDOM screen appears.
to'_ 4£<,e
:_ cR
- 41 -
EN
01All
(, H AN ( [NG
"_
T
"N
The TV/VCR/DVD
allows you to select a language
subtitles during DVD disc (if available) playback.
'I
P_e_<:__he 5UU/_i&E/%te_
d_
H/i; S E [ 1 [NGS
"!
"4
_" _
_
1
Some DVD discs contain
for
scenes which have been shot
simultaneously
from various angles. You can change
the camera angle when the (r_)
icon appears on the
screen,
>{_U8 /x_ck
eeeet
your deehed
s_,,_bt[te am/_uage.
® The subtitle language will appear on the display
at the top of the TV screen.
"7 _
The selected angle will be displayed
bar at the top of the screen.
bar
on the display
sr_)/ec yo_r de_:; ed _mge.
but®n
e estedyu_;sf
O_:Faupea_%
NOTES
® Some discs allow audio language settin_subtitle language
setting on the disc menu. (Operation varies I_tween discs,
so refer to the manual accompanying the disc.)
® If the desired language is not shown after pressing
the SUBTITLE
button several times, the disc does
not have subtitles in that language.
® If you choose a Lmiguage that has a 3 letter language
code, the code will be displayed
every time you
change the Subtitle hmguage setting. If you choose
any other languages,
'---' will be displayed instead.
(Refer to page 440
Adjust the Black Level Settings
parts of the picture brighter.
;_ Pe+_s heMODEb_,_/end_
to make
'_g
pay
it/
2
The TV/VCR/DVD
allows
during DVD disc (if multi
back.
Press
_/'_>AUD©
you to select a language
language available)
play-
b_ h>> d< _g
P'_>w_ he
the
black
u:k
--- ................
ENTEI;'{ bu _or_ io swch
O_;:f:
ON: Makes the dan pals brighter.
OFF: Shows the original picture as recorded.
S
Pp::<;_;;
MO[)E b<_,_ou_!wee
RES/JRf4 bet[on to ext
or he
p ayback,
y©u_ dee_'ed sngu_ge
NOTE
® Pressing the AUDIO button may not work on some
DVDs with multiple audio languages
(e.g. DVDs
which allow audio language setting on the disc menu).
You cm, enjoy stereophonic
ing stereo system.
b_! to/_ twce
back
P_e_:',5the AUDIO b_, los _epeated y d_xd[sg
p ayback _0 seect be/ween S' {!};BEO L,OH
o _,Ofq
STEREO - both right and left chalmels are active (stereo)
L-CH - only left charnel is active
R-CH - only right channel is active
NOTE
visual space on your exist-
(CD/BI{F_3:or/ce} d_i_'i g pay,-
2
Peas
the E_,/TE[1 bb4to_:_ to set it 1 (P4ate_'a
effect) <>_'2 (E_s pbasgzed effect} 0_ OFR
3
Press
the V SURR 0_ F!U'UF@,£b_sttocs to
ext
NOTE (lbr CD play" only)
® Vhlual Surround will not be effective
If the Virtual Surround setting is ON, the sound mode
will be fixed to STEREO, and can not be changed.
- 42-
mode is set to something
if the sound
other thzm STERE().
EN
01AI 1
F H E 0 Ny -S Cx R E...._E Ny I Nli"0 R M AS'I () N
EEi3
You cwl check the infnrmatinn about the current disc by pressing the DISPLAY button on the remote control.
For DVD-Vs
For audio
CDs
The elapsed wid remaining playing time of the cur*The
remahfing
( .....................................................................................................................
playingelapsed
time w_d
of the
current
I_0, ................
,-I
rant track will be displayed.
chapter will be displayed,
jc.-------_......
-_2
2
Pes9 the © S/;_LA)( butte_" ags_
cu_ en/Tte
Tile elapsed and remaining
rant title will be displayed.
playing
P_ess the ©tSPLAV bu tes_ sgs_
c_ '_est '_bts/%ack
to _&:ew
to show
The elapsed and remainin 8 playin 8 time of the current total track will be displayed.
time of the cur-
{7
91'ess be
©SgSLS_Ybuses
aga
e ex
he
dspay
® The BIT RATE w_d the current repeat setting will be
displayed.
If you am playing a dual layered disc, the layer number will also be displayed (L0: Layer 0 is playing.
LI: Layer 1 is playing).
_
}>H!;_:_s
he
dsBay
DSRLAY
buIo/s
For MP3
I The llame of the file
played.
currently
in play will be dis-
sgc_ '_e _,<, _>, '_%¢ /_,Vbyteq_>peeiedyto
sPe_t"e
:ack>
mb?_
/e
'e'>eats_att_,_
a_s;/_e IaT_ s,,,sk:-Astus at he top o the
93
eel1
[]
will be displayed when repeat play has been
selected.
[]
- 43 -
T - indicates Track repeat
[]
G - indicates Group (RAder) repeat
[]
A - indicates Disc repeat
EN
01All
"_
T "-4
"!
"1
"7 _
_
Language
_ _
Code
"1
Language
Code
A-B
Language options are not available with some discs.
P'esg; "e SE:TU > 1%{o _wc< _",!!NO
t-®d so/"_
e
DV© SEYUP s/_e _
s > ses_'s
• If the menu does not appear, press the PLAY button,
the STOP button, then the SETUP button twice.
2
P_ess he A_'ow butto< _//:o sees!t
TO_@ _se> pess
the/£N'fER
b_sttos
® CUSTOM mode will appean
3
S_TUP
[CUSTOM
o_
el£N'(/!{igl
bs
©H
Sets the audio htnguage.
A_'pow b
s _e
set
_'_g _se> F ess
5167
4860
5072
4854
4855
4864
Bulgarian
Burmese
4853
5971
Byelorussian
4851
5759
4947
[CHI]
7254
4961
5464
4965
Danish
[DAN]
Dutch
[DBT]
English
[ENG]
Esperanto
Estonian
5047
6058
5160
5161
5166
h>,/"<:_(,£i_g}
to see<_
s
or
to
the
be
NOTE
®Language Setting for Audio gradSubtitle is not available with some discs. Then use the AUDIO and the
SUBTITLE buttons. Details am on page 42.
?WE _s/-SCR
5261
Fiji
Finnish
French
Frisian
Galician
5256
5255
5264
5271
5358
[FIN]
[FRE]
Georgian
German
[GER]
Greek
[GRE]
Greenlandic
Guarani
5747
5051
5158
5758
5360
Gujarati
Hausa
Hebrew
Hindi
5367
5447
5569
5455
[HUN]
I-K
Icelandic
Indonesian
_e ENTEF%but/o_
You ctm access the TV/VCR SETUP
Faroese
Hungarian
If OTHER is selected on the AUDIO, SUBTITLE
DISC MENU semen, press four-digit number
enter the code for the desired Emguage. (Refer to
hmguage code list.)
Only the languages supported by the disc can
selected.
7Y? CHANGE
Basque
Bengali;Bangla
Bhutani
Bihari
Bislarna
Breton
F-H
SUBTITLE:
Sets the subtitle language.
DISC MENU:
Sets the language for DVD menu.
Pes,
4771
4772
4847
I
AUDIO:
3
Aymara
Azerbaijani
Bashkir
Chinese
Corsican
Croatian
Czech
_AUD_O
se_'_/s_esst
4748
4747
4752
6563
4759
4764
5471
4765
Cambodian
Catalan
D_SpLAy
Hext e_ns
Abkhazian
Afar
Afrikaans
Albanian
Amharic
Arabic
Armenian
Assamese
C-E
©iS,,
P'es_>;d'÷ £_'ow by te_8 (,&_'W t_>see<:{
,ANGUAGK
Bes br®ss he/!£WY_}]_';/bs
® cots _r_
L-N
US
menu by pressing
the SETUP button from the DVD mode. Refer to
"SELECTING THE LANGUAGE" on page 15 to
changing the on-semen menus.
- 44 -
[ICE]
5467
5565
5560
Interlingua
Interlingue
Inupiak
Irish
[IRI]
Italian
[ITA]
Japanese
[JPN]
Javanese
Kannada
Kashmiri
Kazakh
5547
5551
5557
5347
5566
5647
5669
5760
5765
5757
Kinyarwanda
Kirghiz
Kirundi
6469
5771
6460
Korean
Kurdish
5761
5767
[KOR]
Laothian
Latin
5861
5847
Latvian;Lettish
Lingala
Lithuanian
Macedonian
5868
5860
5866
5957
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
5953
5965
5958
5966
5955
5964
5961
Mongolian
Nauru
5960
6047
Nepali
Norwegian
[NOR]
O-R
6051
6061
OccUan
6149
Oriya
Oromo(Afan)
Panjabi
Pashto;Pushto
Persian
Polish
6164
6159
6247
6265
5247
6258
Portuguese
[POR]
Quechua
Rhaeto-momance
6266
6367
6459
Romanian
Russian
6461
6467
[RUM]
[RUS]
S
Samoan
6559
Sangho
Sanskrit
Scots
Gaelic
Serbian
Serbo-Oroatian
Sesotho
Setswana
Shona
Sindhi
6553
6547
5350
6564
6554
6566
6660
6560
6550
Singhalese
Siswat
Slovak
Slovenian
Somali
6555
6565
6557
6558
6561
Spanish
Sundanese
Swahili
[SPA]
5165
6567
6569
Swedish
[SWE]
6568
T
Tagalog
Tajik
Tamil
Tatar
6658
6653
6647
6666
Telugu
Thai
Tibetan
6651
6654
4861
Tigrinya
Tonga
Tsonga
Turkish
Turkmen
Twi
6655
6661
6665
6664
6657
6669
[TUR]
U-Z
Ukrainian
Urdu
Uzbek
Vietnamese
6757
6764
6772
6855
Volapuk
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
6861
4971
6961
7054
5655
7161
7267
[f you choose a Language that has a 3 letter language
code, the code will be displayed eveU time you change
the Audio or Subtitle language setting on page 42. [f
you choose any other languages, '---' will be displayed
instead. (3 letter language code is written in bracket.)
EN
(HAll
You can change certain aspects of the DVD display
screens and on-screen messages on the TV screen.
£
P_'ess Be
S_'YOP
9o thss he
b_A/'oq _wce
DV© S@SP
• If the menu does not appear,
men(i
,_ S_OP
Choose tile appropriate Audio settings for your equipment as it only affect during the playback of DVD
discs.
Pess the SI_°[IJP b ,£to_stwice i_:_STO> _s'ode
so ths_ t'_e CA/©SETUP me_m sppem's
If tile menu does not appear, press tile PLAY button,
the STOP button, then the SETUP button twice.
mode
appes_'s
press the PLAY
button,
the STOP button, then the SETUP button twice.
.....'
I_
_-
SETUP
il
I
70M then p_es<,;the IH',I'Y'E[:_
b_ tof
• CUSTOM mode will appear.
I
]
I,
tO!k, ther_ p x_ss th_; IN'TEA b_Atou
• CUSTOM mode will appeac
©IgP/AY' he_ f>'ess he I3_}!;"EAb_lto_ _o
confir _"_
"Ak,_© O'
the_'_ p_e<;s
the
[}!N'T'Ei_ bm_to/q to
or_ ;'m
[
LANGUAGE
1DISPLAY
I
AUDIO
becw
e/<_q
he_
I';#e£,{; the
I .....
_ DISPLAY
TV MODE:
• Press the An'ow buttons (_,/'V) for an item selection,
then press the ENTER button.
Select 4:3 LETTER BOX for a black bars appears
on top and bottom of the screen.
Select 4:3 PAN & SCAN for a full height picture
with both sides trimmed.
®The default setting is 4:3 LETTER BOX.
STILL MODE:
Press the Arrow buttons (_,/Y) for _uiitem selection,
then press the ENTER button.
Select "AUTO" usually.
If you select "FIELD", the picture in the still mode
will be stabilized.
If you select "FRAME", the picture in the still mode
will be highly defined.
ANGLE ICON:
the
ENTER
button
repeatedly
to tm'n Angle
icon ON or OFE
The default setting is ON.
the
SUrUP
b_ to_
IL
P_'ese the Ar'ow bu to_ss 6&/Y/} to select the
below items thews p_ess tke ENTER b_ tons,
DRC (Dynamic Range Control):
To compress the range of soft to loud sound.
The default setting is OFE
DOWN SAMPLING:
Set to ON when outputting in 48 kHz.
The default setting is ON.
When playing disc with copyright Protection
®If you select OFF, copyright protection will be activated and sound will be down sampled at 48kHz.
DOLBY DIGITAL:
Set to On when the unit is connected to a Dolby Digital
Decode_:
(ON: Output a Dolby Digital signal)
(OFF: Convert tile Dolby Digital to PCM (2 channel
stereo))
• The default setting is ON.
AUTO POWER OFF:
Press the ENTER button repeatedly to turn Auto
Power off ON or OFE
*The default setting
is ON and it will turn tile
TV/VCR/DVD to off automatically after 15 minutes
of no use.
P e_s
_
I[
[:!NTI}27:/b_st%c,m
4
Press
ro_=_o=
LANGUAGE
_
Press t_e S_1ITUPbuttor_ to exit
to exit.
- 45 -
EN
01All
OON_:_OL
LE_TLS
oALL
Parental Control limits the disc viewing that exceed
your settings. (with a password or playback will stop.)
This feature allows you to prevent discs with alternative scenes from being played by your children.
7_4R _,_/71X2,,,L E V_7L
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc's ratings exceed the level you set.
All parental
• Level 8
lock is cancelled.
DVD software of any grade (adult/general/children)
can be played back.
• Levels 7 to 2
Only DVD software intended
children ctm be played back.
• Level 1
Press !u_ S_FY'LP b_ or_ iwce
STOP med_;_
so tat t_e ©UCK S{{TbP me>L appe¢£,_,_;,
• If the menu does not appear, press the PLAY button,
the STOP button, then the SETUP button twice.
for general
use and
Only DVD software intended for clfildren can be
played back, with those intended
for adult and
general use prohibited.
NOTES
®When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the
password.(in
the event you forget the password, see
below)
To change the password, press the Arrow buttons
(_,/_') to select CHANGE at step 5, then press the
ENTER button. Enter the four-digit pass-word, then
press the ENTER button.
®With some DVDs, it may be difficult to find if they
are compatible
with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
® Record the password in case you forget it.
- 46 -
EN
(HAIl
FRo[JBLEsHooF H{o
[/#+_17 15 ++)/J(TT
+ If the TV/VCR/DVD still does not perform properly when it is operated while referring to the relevant sections m_d to "TROUBLESHOOTING GUIDE" in this Owner's Manual, the laser optical pickup unit may be
dirty. Consult your dealer or an Authorized Service Center for inspection and clegming of the laser optical
pickup unit.
- Use discs which have the following logos on them.
(Optical audio digital discs.)
v
I D E
0
"
[IIG
ITAL
- To clegm-off, use a soft cloth.
- Do not use a hard cloth since this will mar the disc.
• Wipe the disc in a straight line from center to edge.
- Never wipe with a circular motion.
® Do not use detergent or abrasive cleaning agents.
AUDIO
® Handle the discs so that fingerprints and dust do
not adhere to the surfaces of the discs.
® Always store the disc in its protective case when it
is not used.
- 50 -
EN
01All
F;/;is, F/i_A L SfSL_]IFI<#_
[ TVNCR
7"I07_/%
ELE(777,;hqJAL
S
Sound output:
I
EdZFICAT
ION%
2 speakers, IW. 8 ohm
CRT
20 inch in-line gun,
90 ° deflection tube
NTSC-M
Television system :
Closed caption system :§15.119/FCC
Video Heads :
Rotary four-head
1/2 inch
Tape width :
Tape speed
SP:
33.40mm/sec.
LP:
16.67mm/sec.
SLP :
11.12mm/sec.
Tuner channel
TV VHF Low :
#2-#6
#7-# 13
TV VHF High :
TV UHF :
#14-#69
CATV
VHF :
5A
MID braid :
A5-A 1, A-I[
SUPER band :
J-W
HYPER band :
W+ 1-W+ 84
Terminals
Antenna input:
Video input:
Audio L/R input:
Head phone:
Coaxial digital
audio output:
Remote control:
Operating
temperature:
Power requirements:
Power consumption
(Maximum):
Picture tube:
Dimensions:
Weight:
Product type:
Discs:
Output signal format:
Frequency response
(out put jack)
DVD (linear sound):
CD:
Signal-to-noise
VHF/UHF/CATV
75 ohm unbalanced (F-type)
RCA connector X 1
RCA connector X 2
1/8" stereo (3.5 ram)
One pin jack,
500m Vpp (75 ohm)
Digital encoded
infrared light system
5°C to 40°C
(41 °F- 104°F)
AC 120V, 60Hz
90W
20"
H:20-3/16" (512.5mm)
W:22-1/8" (562.0mm)
D:I 9-8/7" (504.5mm)
50.7 lbs (23.0kg)
DVD Player
DVD video, Audio CD
NTSC color
20 Hz to 22 kHz
(sample rate: 48 kHz
2(1 Hz to 44 kHz
(sample rate: 96 kHz
20 Hz to 2(1 kHz
ratio
(S/Nratio)(out putjack)
CD:
Dynamic range
(out put jack)
DVD (linear sound):
CD:
Total distortion factor
CD:
Wow and flutter:
75 dB (EIAJ)
85 dB
84 dB (EIAJ)
0.07% (EIAJ)
Below the measurement
limitation (+/-0.001%
W PEAK) (EIAJ)
® Designs and specifications are subject to change without notice.
,_ If there is a discrepancy between languages, the default language will be English.
- 51 -
EN
01All
II CONTROLES
DE OPERACION
Y FUNCIONES
.....
PANEL FRONTAL DEL TELEVISOR/DVD
..........
MANDO A DISTANCIA .........................
VISTA POSTERIOR
............................
II PREPARACION
PARA LA UITLIZACION ..........
CONEXIONES
DE ANTENA/CABLE
..............
CONEXI()N A TOMAS DE ENTRADA EXTERNA ....
PARA INSERTAR LAS PILAS ....................
MODO DE ENTRADA EXTERNA ................
CONEXI()N A UN SISTEMA ESTt_REO ............
CONEXION A UN AMPL1FICADOR
ESTI_REO
52
52
52
52
53
53
53
54
54
54
EQUIPADO CON TOMAS DE ENTRADA DIGITAL,
PLATINA MD O PLATINA DAT (Para DVD) .........
54
CONEXI()N A UN DECODIFICADOR
DOLBY DIGITAL
(para DVD) ...................................
54
SECCION DE TV/VCR
II PREPARACION
PARA LA UTILIZACION
SELECCION DE IDIOMA .......................
AJUSTE DE CANALES .........................
AJUSTE DEL RELOJ ...........................
SECCION DE OVO
REPRODUCCION
BitSICA
..........
......................
ON'FROLES
Y
54
54
55
55
55
DE
[. N(ffON ].S
[
Consulte
la figura
1 de la pglgina
9
]
[
Consulte
la figura
2 de la phgina
9
]
3 de la pfigina
10
]
[
Consulte
1. Bot6n
la figura
POWER
Plvsione este bot6n para conectar
lnel_taci6n.
y desconectar
la ali-
2. Botones
VOLUME A/V
Presioue estos botones para coutrohtr el nivel de volumen
del DVD y el televisor.
3. Botones
SKIP (para DVD)
Presione el bot6n correspondiente
una vez para omitir
capftulos o pistas y desplazarse
a un punto especffico.
Mantenga el bot6n presionado
pare cambiar la velocidad de reproducci6n
en avarice o retroceso.
4. Botdn
PLAY
Inicia la reproduccidn
del contenido del disco o cinta.
5. Bot6n
STOP
Detiene
6. Bot6n
Presione
retirarlos
la reproducci6n
OPEN/CLOSE
este bot6n
de ella.
del disco.
para insertar
discos
en la bandcja
o
7. Bandeja
de carga del disco
8. Indicador
DVD
Se ilumina durante el modo DVD.
9. Bot6n
SELECT
Presione este bot6n para cambiar al modo TV/VCR,
modo de entrada externa o modo de DVD.
10. Indicador
TV/VCR
Se ilumina durante el modo TV/VCR.
11. Botones
CHANNEL
A/T
Utilice estos botones para seleccionar canales memorizados.
-52-
12. Indicador de grabacion
Parpadea durante la grabaci6u. Se ilulnina durante el
modo de espera de grabacidn controlada por telnporizador.
13. Botbn REC/OTR (RECORD)
Presione este bot6n para grabar manuahnente. Este
bot6n tambi6n activa la funci6n de grabaci6n instantfinea (OTR). (La funci6n OTR s61o est_ disponible
durante el modo TV/VCR.)
14. Boton NEW (para TV/VCR)
Presione este bot6n para rebobinar la cinta o para ver
la imagen r@idamente en direccidn de retroceso
durante el modo de reproduccidn. (Bdsqueda en direcci6n de retroceso)
15. Botbn F.FWD (para TWVCR)
Presione este bot6n para adelantar r@idamente la cinta
o para vet la imagen r@idamente en direcci6n de
avance durante el modo de reproduccidn. (BOsqueda en
direccidn de awmce)
16. Boton STOP/EJECT
Presione este bot6n para detener In cinta. Presi6nelo en
el modo de parada para retirar la cinta del
televisoffDV D/videograbadora.
17. Ventanilla del sensor de mando a distancia
18. Toma HEADPHONE
Para couectar auriculares (no suministrados) y escuchar
en priw@o.
19. Toma de entrada VIDEO
Conecte aquf la toma de salida de vfdeo de una
videoc_hnara o de una videograbadora.
20. Tomas de entrada AUDIO L!R
Conecte aquf las tomas de salida de audio de una
videoctimara o de una videograbadora.
21. Compartimiento
del cassette
22. Boton PICTURE
Presione este bot6n para ajustar la imagen.
23. Botones numericos
Modo TV:
Presione (los botones pare acceder directamente al
canal deseado.
No olvide presionar "0" antes de elegir un canal de un
solo dfgito.
Boton +100
Presione este botdu para seleccionar canales de televisidn por cable cuyo ndmero sea igual o superior a 100.
Modo DVD:
Presione este bot6n para introducir el ndn_ero deseado.
Boton +10
Presione este bot6n para introducir mimeros iguales o
mayores que 10.
24. Boton PAUSE
Hate una pausa en la reproducci6n del disco o cinta.
25. Boton SPEED
Presione este bot6n para seleccionar la velocidad de
grabacidn deseada: SP/SLR
26. Boton C.RESET
Presione este bot6n para poner el contador en 0:00:00.
Presidnelo tambi6n para cancelar un ajuste de programa de temporizador.
27. Boton DISPLAY
Modo TV/VCR:
Pare visualizar el contador o el ndmero del canal y la
fccha actual en la pantalla del televisor.
Modo DVD:
Indica el estado actual en la pantalla del televisor para
fines de comprobaci6n.
28. Boton SETUP
Presione este bot6n para activar o salir del modo de
men6s de televisor o configuraci6n de DVD.
29. Botdn TITLE
Para visualizar el menfi de tftulos.
ES
0C28
30. Boton
A/'_J77>I_/_S Sk S:;k'k >kS ©t(" Y
CLEAR
Para cancelar ajustes.
31. Bot6n
MODE
Activa el modo de reproduccidn
reproduccidn aleatoria.
32. Boton
SEARCH
MODE
Presione este bot6n
33. Bot6n AUDIO
Presione este bot6n
audio o el modo de
34. Bot6n
SUBTITLE
Presione este bot6n
tulos deseado.
exterior.
programada
o el modo de
CONVk'RT
lmra localizar
un punto deseado.
42.
43.
44.
por
para seleccionar
sonido deseado.
un idioma de
videograbadora,
sin una caja de convertidm:
Con esta conexi6n
podrfi:
1) Utilizar el m_mdo a dista_cia del televisor/DVD/
para seleccionar
el idioma
videograbadora
para seleccionar
canales.
2) Programar
uno o mils canales
decodificados
para
grabacidn automfi6ca
controlada
pot temporizador.
NOTA:
Este televisor/DVD/videograbadora
SOLO
Repite la reproduccidn
de una seccidn
38. Botdn
RETURN
Permite volver a la operaci6n anterior
configuracidn
de DVD.
39. Botdn
ENTER
41.
('ADOB
)
Utilice
esta conexidn
si su sistema
de televisi6n
cable se conecta
directamente
a su televisor/DVD/
de subtf-
35. Botdn
REPEAT
Repite la rcproduccidn del disco, tftulo, capltulo o pista actual.
36. Botdn ANGLE
(modo DVD)
Presione este botdu para cambiar el fingulo de ]a c_imara
y ver la secuencia que se est;t reproduciendo
desde un
_ingulo dffcrente.
37. Boton A-B REPEAT
40.
_:'/ULU
En algunas zonas serd necesario utilizar una antena
seleccionada.
en el modo
de
puede
DE
de televisidn
/
PREPARA(,K)N
g <_N_, IrIRT I_O_OR/DEC(}]
una caja
de convelidor
satilite,
podri utilizar
la conexidn
en la ilusmmidn.
muestra
PARA LA
Consulte la figura 4 de la pSgina 11
M: h<',_ DO)
esta conexidn,
o si utilza
tambidn
un sistema
bisica
de
que
podrfi grabar
se
calmles
codificados. Sin embargo, la seleccidn de los canales
deberfi hacerse con la caia de converlidor o con la caja
de satElite. Esto significa qne no es posible cambiar de
canal utilizando el mando a distancia del televisor/DVD/
videograbadora. La grabaci6n en ausencia (controlada
por temporizador) estfi limitada aun canal a la vez.
PARA GRABAR UN CANAL
CODIFICADO/DECODIFICADO
l.Ajuste el selector de cgmales del
televisor/DVD/videograbadora
al c_mal de salida de
la caja de convertidor de televisi6n por cable o caja
de satdlite. (Ej., CH3)
2.Seleccione el cgutal que desea grabar en la caja de
converfidor de televisi6n por cable o caja de satdlite.
Nora para el instalador
de sistemas CATV
Esta nota tiene la finalidad de llamar la atencidn
del insta]ador de sistemas CATV para que tenga
en cuenta el Arrfculo 82(I-4(I de la NEC, que proporciona recomendaciones
para hacer una conexi6n a tierra apropiada y, en particular, especifica
que la tierra de] cable debe conectarse al sistema
de puesta a tierra del edificio, tan cerca del punto
de entrada del cable como sea posible.
por cable
Con@telo auna toma de CA est_ndar (120 V,/60 Hz).
NOTA: Antes de conectar el cable de alimentacidn
a
una toma de CA estfindar, reffrelo del gancho
para evimr dafiarlo.
48. Toma de salida
de audio digital
COAXIAL
Con@tela solamente
a la entrada digital de un amplificador externo o decodificador
de audio de DVD.
que se estfi viendo.
Si su cotnDuSfa de televMdn por cable le sutnhdsm_
Utilice este botdn para ajustar el temporizador
de dormir.
45. Bot6n
SELECT
Presione este bot6n para cambiar entre los modos
TV/VCR y DVD. E1 modo seleccionado
(TV/VCR o
DVD) se visualiza en el indicador del panel delantero.
46. Toma de entrada
ANT.
sistema
e! canal
0 C/i,IA l_E SAITiLIT];"
AI utilizar
Presione este bot6n para establecer un ajuste.
Botones
de flechas
Modo TV/VCR:
Presione estos botone_ para seleccionar nil ulodo de
ajuste en el lnenfi que aparece en la pantalla del televisor.
Presidnelos
tambidn para seleccionar
opciones o
establecer ajustes en un menfi en particular.
Modo DVD:
Use estos botoiles para hacer ajustes irlientras observa
la imagen en la pantalla del televisor.
Botdn
DISC MENU
Muestra los mends contenidos
en el DVD.
Botbn V.SURR
Activaffdesactivar
el envolvente
virtal.
Botdn
MUTE
Suprime la salida de sonido. Presi6nelo de nuevo para
restablecer
el sonido.
Botbn
SLEEP
Condctela a una antena,
o sistema de satdlite.
47. Cable de alimentacidn
grabar
Cuando yea uu programa grabado eu otra fuente (videograbadora o videoclmara),
utilice las tomas de entrada de audio/vfdeo
de la parte delantera del televisor/DVD/videograbadora.
Conecte las tomas de salida de audio/video
de otra flmnte a
las tomas AUD10 L/R y VIDEO de este
televisor/DVD/videograbadora.
Luego, presione los botones
CHANNEL
A/V hasta que aparezca "AUX" en la pantalla.
NOTA:
.
II
I
- 53 -
Cuando conecte una videograbadora
mouof6nica
(otra
fuente) a este televisoffDVD/videograbadora,
conecte la
toma de salida de audio de la videograbadora
monof6nica
(otra fliente) a la toma AUDIO L de este
televisoffDVD/videograbadora.
El audio saldrfi igualmente pot los canales izquierdo y derecho.
Consulte
la Iigura
5 de la p_igina
I
12
I
ES
0C28
I
Consulte la figura 7 de la pfigina 14
NOTAS:
1) Abra la cubierta del compariimiento de las pflas
empujando la cubierta del mgmdo a _%
distancia ell el sentido de la fiecha.
2) Inserte 2 pflas "AA" ell el
compartimiento de las pilas, ell el
sentido indicado por las marcas de polaridad (+/-).
3) Vuelva a poner la cubierta.
• AsegOrcse de desconectar la alimentacidn de todos
los componentes del sistema antes de conectar otto
componente.
• Consulte los manuales de instrucciones de los
componentes que va a conectar al
televisor/DVD/videograbadora.
,, Si conecta un decodificador Dolby Digital, ajuste
la funcidn DOLBY DIGITAL a ON para salida de
audio en el modo de configuracidn.
• A menos que se haga la conexidn a un decodfficador Dolby Digital, ajuste la funcidn Dolby
Digital a OFF para salida de audio en el modo de
configuracidn. La reproduccidn en un
televisor/DVD/videograbadora
utilizando ajustes
incorrectos puede generar ruido y distorsidn, y
tambidn puede causar dafios a los altavoces.
AI usar una serial de entrada externa (otra videograbadora o una videocfimara), conecte los cables de salida de
audio/vfdeo del equipo extemo alas tomas AUDIO L/R
[N/V[DEO IN de su televisor/DVD/videograbadora.
Luego, presione los botones CHANNEL A/T hasta que
aparezca "AUX" en la pantalla.
Fabricado bajo licenc, ia de DoIby
Laboratories, !Dolby y el simbolo de la D
done son mamas de f_brica de Dolby
Laboratories,
Utilice un cable digital coaxial de audio de venta en el
comercio especializado para hacer las conexiones de audio.
Conexidn a un amplificador equipado con tomas de
entrada digital, platina MD o platina DAT.
I
/
PRLPARA(.K}N
I
Consulte la figura 6 de la pfigina 13
I
Dolby Digital a OFF para salida
de configuracidn.
La reproduccidn
en un televisor/DVD/videograbadora
aiustes incorrectos
puede generar
tambidn
puede
causar
darios
, Si aparecen algunas cifras en la esquina de la pantalla, pulse el botdn POWER sin desenchufar el
corddn de alimentacidn.
de
utilizando
ruido y distorsidn,
y
a los altavoces.
Si utiliza este televisoffDVD/videograbadora
para
reproducir un disco DVD grabado en formato de
sonido envolvente Dolby Digital de 5,1 canales, el
televisor/DVD/videograbadora
emitird un flujo de
datos DOLBY DIGITAL desde su toma de salida de
audio digital COAXIAL.
Si conecta el reproductor a
un decodificador
Dolby Digital, podr_ disfrutar de
una tonalidad mils convincente
y real, con un sonido
envolvente potente y de alta calidad similar al de los
cines.
Utilice cables digitales coaxiales de audio
disponibles en el comercio especializado
para hacer
las conexiones de audio.
[TV/VCR ]
Enchufe el corddn de alimentacidn del
televisor/videograbadora
en una toma de CA est_ndar.
NOTA:
de los compo-
televisor/DVD/videograbadora.
® Ajuste la funcidn
audio ell el lnodo
PARA LA
I
NOTA$:
* La fuente de audio de un disco grabado en formato de
sonido envolvente Dolby Digital de 5,1 canales no se
puede grabar como sonido digital mediante una platina MD o DAT.
" Asegfirese de desconectar la alimentacidn de todos
los componentes del sistema antes de conectar otto
componente.
® Consulte
los manuales
de instrucciones
nentes que va a conectar
al
I
I
Aseg_rese de que ...
® Pulse el botdn POWER para encender el
televisor/videograbadora.
NOTA: Esta funcidn afecta s61o el idioma en el men_
de la pantalla y no la fuente de audio.
Pulse el bot6n SETUP en el mando a distancia.
Pulse el bot6n _, o T para serialar "LANGUAGE".
Seleccione "ENGLISH", "ESPAlqOL" o "FRANtTAIS"
con el bot6n ENTER.
Pulse el botdn SETUP en el lnando a distancia para
volver al modo del televisor.
- 54 -
ES
0C28
1)Pulse el bot6n SETUP en el mando a distancia.
Pulse el botdn _, o T para indicar "AJUSTE
RELOJ".
NOTA: Si, pot alguna razdn, el mend estfi en ingl& o
franc&, pulse el botdn SETUP en el mando a distancia,
pulse el botdn A para sefialar el "LANGUAGE
[ESPANOL]" o "LANGAGE [FRAN(_AI[S]", a continuacidn, pulse el botdn ENTER y pulse el botdn SETUP
en el mando a distancia.
Luego, pulse el bot6n ENTER.
2)Pulse el botdn _, o T para indicar "AJUSTE
MANUAL RELOJ".
[ TV/VCR ]
Puede programar el sintonizador para buscar todos
los ctmales que recibe en su localidad.
NOTA: E1 canal preparado NO es necesario cuando
est6 conectado auna caja de cable o caja de sat61ite.
S61o tiene que seleccionar con el selector de canal
del televisor/videograbadora al canal de salida de la
caja de cabe o caja de sat61ite (por ejemplo el c_mal
CH3). Seleccione el ctmal a vet en la caja de cable o
caja de sat61ite.
Asegdrese de que ...
* Pulse el bot6n POWER para encender el televisor/videograbadora.
Pulse el botdn SETUP en el mando a distancia.
Pulse el botdn _, o T para serialar "AJUSTE DE
CANAL".
Luego, pulse el bot6n ENTER.
3)Pulse el botdn A. o V basra que aparezca el mes
deseado. (Ejemplo: Mayo - 05)
Luego, pulse el bot6n J_.
4)Pulse el bot6n _, o V hasta que aparezca el d/a
del mes deseado. (Ejemplo: 6 - 06)
Luego, pulse el bot6n _.
5)Pulse el botdn _, o V hasta que aparezca el ario
deseado. (Ejemplo: 2004)
Luego, pulse el bot6n _.
6)Pulse el botdn A o V hasta que aparezca la hora
deseada. (Ejemplo: 5, PM)
Lnego, pulse el bot6n l_,_.
7)Pulse el bot6n A o V basra que apamzca el minuto deseado. (Ejemplo: 4(1)
8)Pulse el bot6n SETUP en el mgmdo a distancia.
Aunque los segundos no se visualizan, 6stos
empiez_m a contar des& 00 cuando se pulsa
SETUP en el ma_do a distancia. Utilice esta funci6n para sincronizar el reloj con la hora cormcta.
A continuacidn, pulse el botdn ENTER.
Pulse el botdn A o T para serialar "AUTOPROGRAMACION DE CA".
A continuaci6n,
pulse el bot6n ENTER.
El sintonizador
busca y memoriza
activos en su localidad.
todos los canales
El sintonizador se detiene en el c_mal memorizado
m_s bajo.
• Cuando se activa AUTOPROGRAMACION
DE
CA, donde no hay entrada de serial del televisor,
aparecer4 "NO HAY SEI'_AL DE TV" en la pantalla despu6s de terminar la b6squeda de canales.
,, El televisor/videograbadora
puede mconocer los
canales de TV para que sean canales de TV de
tmtena de cable con las condiciones de mcepci6n.
En este caso, pruebe nuevamente con el pmfijado
automfifico en las condiciones de recepci6n fina.
• Conecte la alimentaci6n del amplificador
componentes, si es necesario.
y otros
®La alimentacidn se conectar&
s@ qqes
[ TV/VCR ]
Cercidrese...
• La alimentacidn del televisor/videograbadora
deberfi estar conectada.
_;:_cs_,_,r' :,>
d P/'eso_'e e bods_ _0:_
/;Y
La ba'_deja se cerrar4 automdticamente y la reproducci6n comenzarfi desde el prhner cap/mlo o pista
deJ disco. Si la reproducci6n no comienza automfiticamente, presione el bot6n PLAY.
Cuando reproduzca un DVD que tenga grabado un
menfi de tftulos, el menO podrfi aparecer en la pantalla.
En el ejemplo de abajo, el reloj va a ajustarse as[:
FECHA: 6 de mayo de 2(104
HORA: 5:4(I PM
-55 -
ES
0C28
SYLVANIA
LIMITED
FUNAI CORP. will repair this SYLVANIA
workmanship
as follows:
product,
WARRANTY
free of charge
in the USA in the event of defect
in materials
or
DURATION:
PARTS:
FUNAI CORR
date of original
warranty.
LABOR:
FUNAI
original
LIMITS
THIS
will provide parts to replace defective parts without charge for one (1) year fi'om the
retail purchase. Two (2) years for Picture Tube. Certain parts are excluded
fl'om this
CORR will provide
retail purchase.
the labor without
charge
for a period
of ninety
(90) days from the date of
AND EXCLUSIONS:
WARRANTY
IS EXTENDED
ONLY
TO
THE
ORIGINAL
RETAIL
PURCHASER.
RECEIPT OR OTHER PROOF OF ORIGINAL
RETAIL PURCHASE
WILL BE REQUIRED
THE PRODUCT
TO OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty
shall not be extended
to any other person
A PURCHASE
TOGETHER
WITH
or transf)ree.
This warranty is void and of no eff)ct if any serial numbers on the product are altered,
or if service was attempted by an unauthorized
service center. This SYLVANIA Limited
any product not purchased
and used in the United States.
replaced,
warranty
defaced, missing
does not apply to
This warranty only covers f'ailures due to defects in material or workmanship
which occurs (luring normal use. It
does not cover damage which occurs in shipment, or f'ailures which are caused by repairs, alterations
or product not
supplied by FUNA1 CORR, or damage which results from accident, misuse, abuse, mishandling,
misapplication,
alteration,
faulty installation,
improper
maintenance,
commercial
use such as hotel, rental or office use of this
product or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORR AND ITS REPRESENTATIVES
OR AGENTS SHALL IN NO EVENT BE LIABLE
FOR ANY
GENERAL,
INDIRECT
OR CONSEQUENTIAL
DAMAGES
ARISING
OUT OF OR OCCASIONED
BY THE
USE OF OR THE INABILITY
TO USE THIS PRODUCT.
THIS WARRANTY
IS MADE 1N LIEU OF ALL
OTHER WARRANTIES,
EXPRESS
OR IMPLIED,
AND OF ALL OTHER
LIABILITIES
ON THE PART OF
FUNAI,
ALL OTHER
WARRANTIES
INCLUDING
THE WARRANTY
OF MERCHANTABILITY,
AND
FITNESS
FOR A PARTICULAR
PURPOSE,
ARE
HEREBY
DISCLAIMED
BY FUNA1
AND
ITS
REPRESENTATIVES
IN THE UNITED STATES.
ALL WARRANTY
INSPECTIONS
AND REPAIRS
MUST BE
SERVICE
CENTER.
THIS WARRANTY
IS VALID
WHEN
AUTHORIZED
SERVICE FACILITY.
PERFORMED
THE UNIT
BY A FUNAI AUTHORIZED
IS CARRIED-IN
TO FUNAI
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, YOU MAY HAVE OTHER RIGHTS
THAT VARY FROM STATE TO STATE, 1E AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE
UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT. PLEASE CONTACT FUNAI
CORR
ATTENTION:
FUNAI CORR RESERVES THE RIGHT TO MODIFY
WITHOUT PRIOR NOTICE.
ANY DESIGN
To locate your nearest SYLVANIA Authorized Service Center
please caffl-800-968-3429
or write to the following:
FUNAI C/)RPORATION,
SERVICE (;ENTER
OF THIS PRODUCT
or for general service procedure,
INC.
19900 Van Ness Avenue, Torrance, CA 90501
Tel :1-800-968-3429
http://www.funai-corp.com
Head Office: 100 North Street. Teterboro. NJ 07608
PLEASE
Printed in China
DO NOT SHIP YOUR
UNIT T() THE TETERBORO
ADDRESS.
0EMN02469
TI000UA _
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 56 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Thu Apr 05 15:52:05 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools