Sylvania LC260SS8 User Manual LCD TELEVISION Manuals And Guides L0705171
SYLVANIA LCD Television Manual L0705171 SYLVANIA LCD Television Owner's Manual, SYLVANIA LCD Television installation guides
LC260SS8 L0705171
User Manual: Sylvania LC260SS8 LC260SS8 SYLVANIA LCD TELEVISION - Manuals and Guides View the owners manual for your SYLVANIA LCD TELEVISION #LC260SS8. Home:Electronics Parts:Sylvania Parts:Sylvania LCD TELEVISION Manual
Open the PDF directly: View PDF .
Page Count: 39
Download | ![]() |
Open PDF In Browser | View PDF |
SYLVANIA 26" Digital / Analog LCD TV Owner's Manual LC260SS8 / HE_HDEnNmONTE_EWSI_ H_m|'! ou_ D|G|TAL .... I YOU TO RECEIVE MUST CONNECT DIGITAL/ANALOG ANTENNA.SIGNAL, I _) 2007 Funai Electric Co., Ltd, WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION/ A THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. CAUTION: TO REDUCE THE RISK OF ELECTRIC THIS SYMBOL INDICATES THAT THERE ARE SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO IMPORTANT QUALIFIED ACCOMPANYING OPERATING AND MAINTENANCE INSTRUCTIONS SERVICE PERSONNEL. IN THE LITERATURE THE APPLIANCE. Theimportantnoteis locatedonthe rear 0fthe cabinet. Important Safeguards 1o READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. 2o RETAIN INSTRUCTIONS - The safety and operating instructions should be retained for future reference. 3o HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. 4o FOLLOW INSTRUCTIONS - All operating and use instructions should be followed. 5o CLEANING - Unplug TV from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6o ATTACHMENTS - Do not use attachments not recommended by theTV manufacturer as they may cause hazards. 7o WATER AND MOISTURE - Do not use this TV near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8o ACCESSORIES- Do not place this TV on an unstable cart, stand, tripod, bracket, or table.Tile TV may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended ! by the manufacturer, or sold with the TV. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. AMEUBLES - Cet appareil ne dolt _tre plac_ que sur un meuble (avec ou sans roulettes) recommand_ par le fabricant. Si vous I' installez sur un meuble 5 roulettes, d_placez les deux ensembles avec precaution. Un arrGt brusque, I'utilisation d'une force excessive et des surfaces irr_guli_res risquent de d_stabiliser I'ensemble et de le renverser. 9o VENTILATION - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of the TV and to protect it from overfleating, these openings must not be blocked or covered.The openings should never be blocked by placing theTV on a bed, sofa, rug, or other similar surface. This TV should never be placed near or over a radiator or heat register. This TV should not be placed in a builtqn installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to. 19o POWER SOURCES - This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For TVs intended to operate from battery power, or other sources, refer to the operating instructions. 11o GROUNDING OR POLARIZATION -This TV is equipped with a EN polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12o POWER-CORD PROTECTION - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 1 :'L OUTDOOR ANTENNA GROUNDING - If an outside antenna or cable system is connected to theTV, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER ...... _-_- --I__--_-- NATIONAL ELECTRICAL CODE E[ECT_4C SE_VlCF EQUIPMENT NEC NATIONAtFLECT_ICALCODE ELECTRODE SYST_ CNEC A_T 2_0, PARTH_ 14o LIGHTNING - For added protection for this TV receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the TV due to lightning and power-line surges. 1 _oPOWER LINES - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light of power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 1 _o OVERLOADING - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17o OBJECT AND LIQUID ENTRY - Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the TV. 8 SERVICING - Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. _9o DAMAGE REQUIRING SERVICE - Unplug this TV from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power supply cord or plug is damaged or frayed. b. If liquid has been spilled, or objects have fallen into the TV. c. IftheTV has been exposed to rain or waten d. If the TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the TV to its normal operation. e. If the TV has been dropped or damaged in any way. f. When the TV exhibits a distinct change in performance, this indicates a need for service. 20° REPLACEMENT PARTS - When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, injury to persons or other hazards. 2'1o SAFETY CHECK- Upon completion of any service or repairs to this TV, ask the service technician to perform routine safety checks to determine that the TV is in proper operating condition. 22 HEAT- This TV product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. : i izi!iil [] Precautions !r, (_ LAMP IN LCDCONTAINS MERCURY,DISPOSEACCORDINGTO LOCAL,STATEOR FEDERALLAW. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR LES CHOCS IeLECTRIQUES,INTRODUIRE LAME LAFOND. PLUS LARGE DE LA FICHE DANS LA BORNEIeVlTER CORRESPONDANTE DE LA PRISE ET POUSSER LA JUSQU'AU FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual.The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE !a This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the _iill( instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged followi ng measu res: 1) Reorient or relocate the receiving antenna. to try to correct the interference by one or more of the i 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This Class B digital Cet appareil apparatus num_rique complies with Canadian de la classe B est conforme ICES-003. _ la norme NMB-003 du Canada. Note to CATV system installer: I I This reminder is provided for proper grounding to call the CATV system installer's and, in particular, attention specifies that the cable ground to Article 820-40 of the NEC that provides guidelines I should be connected to the grounding system of the I building as close to the point of cable entry as practical. 1 EN LOCATION For safe operation and satisfactory performance of the unit, keep the following sources of intense in rnind when selecting • • Shield it from direct sunlight and keep it away from Avoid dusty or humid places. • Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation unit. Do not place the unit on a carpet because this will block the ventilation holes. • Install the unit in a horizontal • • Avoid locations subject to strong vibration. Do not place the unit near strong magnetic • Avoid moving • Be sure to unplug a place for its installation: heat. holes at the top and bottom of the position. the unit to locations the AC power where cord from fields. temperature differences the outlet before carrying are extreme. the unit. TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug. • If, by accident, water is spilled on the unit, unplug the power cord immediately and take the unit to our authorized service center for servicing. • Do not place anything directly on top of the unit. The serial number of this product may be found on the back of the unit. No others have the same serial number You should record the number and other vital information chase to aid identification in case of theft. here and retain this book as a permanent date Of pu!chase dealer phone No. serial No dea er purchasefrom model Nol dealer address Note about as yours. record of your pur- recycling: This product's packaging ] materials are recyclable and can be reused. Please dispose of any materials in accordance withI your local recycling regulations. I Batteries should never be thrown away or incinerated chemical wastes. [] Supplied owner's manual but disposed of in accordance with your local regulations Accessories quick start guide remote control batteries (1EMN22176) (NFO15UD) (AA x 2) (1EMN22136) • If you need to replace these accessories, please refer to the part No. with the illustrations customer support line found on the cover of this manual. • Depending on your antenna Contact your local electronics [] Symbols system, you may need different types of combiners for the symbols used in this manual. : Digital TV operation : Analog TV operation EN symbol appears under the function heading, operation is applicable and call our toll free (mixers) or separators store for these items. Used in this Manual The following is tile description Description refers to: • If neither concerning to both. (splitters). _Features [] Contents • DTV/TV/CATV - You can use your remote control to select channels which are broadcast in digital format and conventional analog format. Also, cable subscribers can access their cable TV channels. • Program Information Display (DTV only) - You can display the title, contents and other information of the current DTV program on the TV screen. • Auto Channel Scan - This unit automatically channels available setup procedures. scans and memorizes in your area, eliminating • V-chip - This feature allows you to block children's inappropriate programs. difficult is no signal input from the antenna and no operation off automatically. • Sleep Timer for 15 minutes, - This feature will automatically of the unit at a specific time. terminal the unit will turn turned off the power • PLL Frequency Synthesized Tuning - Provides free and easy channel selection and lets you tune directly to any channel using the channel number buttons on the remote control. • Resume - This unit automatically power failure occurs. memorizes settings ifa HDMI Input PC Input Component S-video 4 4 5 6 Installingthe Batteries............................................ ControlPanel..................................................... RearPanel....................................................... 6 7 7 CONN CTON BasicConnection.................................................. ExternalDeviceConnection........................................ 8 9 SETTING Initial Setup..................................................... Main Menu...................................................... AutoChannelScan............................................... 13 14 14 LanguageSelection.............................................. 15 WATCH NG TV ChannelSelection................................................ 16 VolumeAdjustment.............................................. Still Mode....................................................... 16 17 SwitchingEachMode............................................. SwitchingAudioMode ........................................... ScreenInformation .............................................. 17 18 19 TVScreenDisplayMode........................................... SleepTimer..................................................... 20 21 OPTIONAL • Choices for On-screen Language - Select your on-screen language: English, Spanish or French. • Stereo Sound Function 3 SuppliedAccessories .............................................. Symbols Usedin this Manual....................................... Features......................................................... RemoteControlFunction.......................................... /N YAL access to • Closed Caption Decoder - Built-in closed caption decoder displays text for closed caption supported programming. • MTS/SAP Tuner - Audio can be selected from the remote control. • Auto Shut Off Function - If there /N FRODUCT ON Precautions...................................................... SETTING ChannelList..................................................... 22 ManualRegister................................................. AntennaConfirmation............................................ 23 23 PictureAdjustment.............................................. SoundAdjustment............................................... 24 25 ClosedCaption................................................... DI"VClosedCaption............................................... CCStyle......................................................... V-chip.......................................................... PCSettings...................................................... HDMIAudio ..................................................... 26 27 28 30 33 34 TROUBLESHOOT BIG Troubleshooting Guide........................................... Video Input 35 INFORM/', T OIt Input AV Input Digital Audio Coaxial Output Glossary........................................................ Maintenance.................................................... 37 37 CableChannelDesignations ....................................... GeneralSpecifications ............................................ Electrical Specification ............................................ OtherSpecifications ......................................... 38 38 38 38 Limited Warranty.................................... Backcover © 2007 Funai Electric Co., Ltd. All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. obligation to notify any person or organization of such changes. F'UNAI with the _'_ design is a registered trademark of Funai Electric Funai reserves the right to change the content herein Co., Ltd and may not be used in any way without or stored without in the the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. iiiiiii_ii EN _S [] Remote Control Function 1. 2. POWER button (pl3) Press to turn the unit on and off. 11. SLEEP button Number buttons (pl6) • Press to select channels. - button 12. AUDIO button (p18) Digital Mode (DTV) Press to select the audio language. Analog Mode (TV) Press to select the audio mode, • Press to shift the minor channel 3. from the major channel. SETUP button (p14) 13, STILL button 3 5. 5 6 through 6. 8 the items. of • Press to display the channel information, menu • Press to display the channel operation, 7. CH RETURN button number, (p16) VOL. /_buttons(pl6) input mode, signal type and TV MUTE D_ button (p16) Press to turn tile sound on and off, setting, 16. CH •I• buttons (p16) Press to select channels and the 10. INPUT SELECT button (pl 7) Press to access connected external orVCR. [] Installing Install the batteries Battery • • • • EN Mode • Press to display the external Press to adjust the volume. 9. signal type and TV setting, External Input Press to return to previous channel. 8. signal type and TV setting, Analog Mode (TV) (p19) Press to return to previous (p20) 15. INFO button (p19) Digital Mode (DTV) when the main menu is displayed, BACK button button Press to select aspect ratio available for the TV screen, ENTER button (p13) Press to decide the command setting 7-- 14. SCREEN MODE _ : change manually by using [CH •/V] Note: • "No Signal" will appear on the TVscreen after the minor channel broadcast is over. EN on the sound. the minor • Press [CH RETURN] to return to the previously viewed channel. far surpasses analog broadcasting disappear 12-] Be sure to press [-] before entering channel number. With its high definition of volume. I ] to recover the i ,?i; [] Still Mode [] Switching Youcanfreezethe imageshownontheTVscreen, Youcaneasilyswitchwith the remotecontrolto the DTV(ATSC)andTV (NTSC)orto accessan external devicewhentheyare connectedtothe unit, Press [STILL] to pause the image shown on the screen. Each Mode Press [INPUT SELECT] or [CH A] repeatedly to cycle through the input modes. i ic) iy I " TV/DTV channel 1 • The sound output will not be paused. • If no signal is detected during or protected o_ signal is received still mode, the image remains paused and the sound output will be muted. • The still function will be released after 5 minutes. To cancel still mode, press any button except iiii! [POWER]. Pressing [CH Y] reverses the direction of the mode. To use the video or S-video input jack of VIDEO 1 on the unit, select "Video1 ". To use the video or S-video input jack of VIDEO 2 on the unit, select "Video2". To use the component video input jack of COMPONENT 1 on the unit, select "Componentl'L To use the component video input jack of COMPONENT 2 on the unit, select "Component2'L To use the HDMI l-IN jack on the unit, select "HDMI1 'L i To use the HDMI 2-IN jack on the unit, select "H D MI2". i To use the PC-IN jack on the unit, select "PC". iO i7] ii:_!!ii_i [] Switching Audio Mode Thissectiondescribes howto switchthe audiolanguage, 1 Press [AUDIO] to display the currently audio mode. While receiving selected 1 Press [AUDIO] to displaythe currently language and the number of available 2 Press [AUDIO] an MTS broadcast, press repeatedly to cycle through channel. the available selected languages. audio i %i available When all audio are available • Available When stereo and monaural audio are available broadcast. language When SAP and monaural When only monaural audio are available repeatedly to cycle through the audio languages. languages "Other" differ depending is displayed cannot be acquired, on the when the audio or the acquired languages are other than English, Spanish or French. • The current mode will automatically disappear in a few seconds. audio is available Note: • Pressing[AUDIO] does not control external audio device. (Cannot be switched) STEREO : Outputs stereo-audio SAP MONO : Outputs second audio program : Outputs mono-audio • The current mode will automatically disappear in a few seconds, EN J [] Screen i ,?i_ Information Youcandisplay thecurrently selected channelor other information suchas the audio modeon the TVscreen. Inthe analog mode,the current channelnumberand the audio modeare displayed. In the digital mode,the detailed broadcastinginformation for the current channelsuchas programtitle, programguidesare displayed. Press [INFO] to display the details of the currently selected program. Press [INFO]. N!O [Broadcasting Information] • The following • The current resolutions channel number, audio mode, type of for video signal, TV aspect ratio, CC and TV rating are displayed TV screen. To clear the display, at the top-right corner of the information 1 2 program title broadcast station 3 program guide (The program press [INFO] again. information You can also press [BACK]. iiii! is displayed. guide added to broadcasting is displayed. 4 lines.) channel 5 audio language Maximum display of 4 number (Refer to"Switching Audio 6 effective scanning 7 program format 8 program aspect ratio 9 program rating 10 CC (not available Mode" on page 18.) lines and scan mode if CC is set to "Off") ii :iii! ii ¸ ii iii!i_ 9 lO Note: • When the program guide consists of more than 4 lines, use [Cursor A/V] to scroll • "No description provided" is displayed when the program guide is not provided. • While the program guide is displayed, the dosed caption function is interrupted. • In externalinput mode, the following screen is displayed; e.g.) When an external device is connected to VIDEO 1 input jack. • The information 1 minute. display will automatically disappear in []TV Screen Display Mode 4 types ofdisplaymodescanbeselectedwhen the broadcasting station issending4:3 or 16:9video signal.And3 typesofdisplaymodescanbe selectedfor PCinputsignal. Press [SCREEN MODE _] aspect repeatedly to switch the TV For 16:9 video signal ratio. 'A(_i)i!! Full (normal) Zoom Expand Cinema For 4:3 video signal Full Sidebar (normal) [Fulll Display a 16:9 picture at its original [Zoom] size. Display a 16:9 picture at its maximum size without changing its horizontal and vertical ratio, Wide [Cinema] Cinema Display a vertically [Sidebar] Display a 4:3 picture at its original size. Sidebars appear on both edges of the screen. [Full] Display a 4:3 picture stretched [Cinema] stretched picture. [Expand] at a 16:9 size; the picture horizontally Display a 4:3 picture Display a horizontally For PC input stretched picture. signal is to fill the screen. at a 16:9 size; the picture is stretched horizontally and vertically to fill the screen, This crops out the top and bottom of the picture, Sidebar Full [Wide] Display the picture with its center at the original and the edges stretched size horizontally. Dot By Dot (normal) [Sidebar] Display a proportionately stretched picture. Sidebars appear on both edges of the screen. [Full] Display a picture that is stretched fill the screen. out of proportion [Dot By Dot] Display a picture in its original size, Note: • Youmay not switch the display mode depending on the program. • For PCinput signal "Sidebar" may not be selectable depending on the aspect ratio of the input signal. EN to [ (b [] Sleep Timer Thesleeptimer canbe setto automatically turnoff the unitafter an incremental periodof time. 1 Press [SLEEP] to set the sleep timer. • Sleep timer display 2 i(b appears on the TV screen. Press [SLEEP] repeatedly until shut off. to change the amount of time • You can set your unit to turn off after a set period time (from 30 to 120 minutes). of • Each press of [SLEEP] will increase the time by 30 minutes. • After set up, the sleep timer display for checking can be called up by pressing [SLEEP]. To Cancel the Sleep Timer Press [SLEEP] repeatedly on the TV screen. until "Sleep Off" is displayed Note: ii :iii! • The sleep timer setting display will automatically disappear in a few seconds. • When you disconnect the unit from the AC outlet or when a power failure occurs, the sleep timer setting will be canceled. ii ¸ ii iii!i_ i0 ii:!!ii_i EN [] Channel List Thechannellist functionletsyouremoveundesiredchannelsfromthe channelregistrationlist, Press [SETUP] to display 2 Use [Cursor [ENTER]. A/Y] the main menu. Press [SETUP] to exit. to select "CHANNEL", then press or 3 Use [CursorA/V] to select "Channel List", then press [ENTER]. or Use [Cursor A/V] to select the channel you want to remove, then press [ENTER]. or • The channel display for the removed channel darkens. You will not be able to select the channel again using [CH A/V]. • To reactivate a removed [Cursor A/V] display lightens. channel, highlight it using and press [ENTER]. The channel • When you remove a major channel, channels are removed as well. its minor Note: • The channel with the "DTV"indicated on the display is ATSC.Otherwise the channel is NTSC. EN [] Manual [] Antenna Register Themanualregisterfunctionletsyouaddthechannelsthat werenot added bythe autochannelscanduetothe receptionconditionat theinitialsetting, Press [SETUP] to display 2 Use [Cursor [ENTER]. A/V] the main menu. Thisfunctionletsyoucheckthesignalstrengthofeachchannel, Press [SETUP] to display to select "CHANNEL", then press Use [Cursor A/V] [ENTER]. or 3 Use [Cursor A/r] i ,?i_ Confirmation the main menu. to select "CHANNEL", then press or to select "Manual Register", then press [ENTER]. Use [Cursor A/V] to select "Antenna", then press [ENTER]. or ii :i:il or W Use [the Number channel buttons] to enter the number of the you want to add, then press [ENTER]. @@@ @00 @00 Use [the Number buttons] channel for which or [CH A/r] to select the you want to check the signal strength, @@@ @@@ @@@ Or Press [SETUP] to exit. • If the channel is set to external confirm the antenna condition. input, you cannot Note: • If set up completes successfully, "Registered to the Channel List"is displuyed. • If external inputis used, iris notpossible to register the chunnel and "Unuvailable" will be displayed on the TV screea. Press [SETUP] to exit, ......... EN [] Picture Adjustment Cursor_ Youcanadjustbrightness, contrast,color,tint andsharpness. I Cursor Brightness D_ to decrease to increase brightness brightness to decrease contrast to increase contrast to decrease color to brighten color to add red to add green to make soft to make clear Press [SETUP] to display the main menu. Contrast Color 2 Use [Cursor A/V] to select "PICTURE", then press [ENTER]. Tint or Sharpness Reset Settings Use [Cursor A/r] 3 Use [Cursor A/r] to select the item you want to adjust, to select "Reset", then press [ENTER] to restore the "Picture Mode" setting to default. then press [ENTER]. or or Color Temp. Use [Cursor A/r] Adjust the picture quality. to select the desired press [ENTER]. (Cool, Neutral setting, then and Warm) Picture Mode Use [Cursor A/r] to select the desired press [ENTER]. (Standard, Dynamic, setting, Movie then or and News) Or Energy Saving Use [Cursor W:27.4 inches (696mm) H: 20.3inches (515mm) D: 5.0 inches (126.5mm)W:27.4 inches (696mm) H: 21.9 inches (555mm) D: 10.3 inches (260mm) Weight: 28.7Ibs. (13.0kg) SYLVANIA LIMITED WARRANTY FUNAI CORR will repair this product, workmanship as follows: free of charge in the USA in the event of defect in materials or DURATION: PARTS: FUNAI CORP.will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts and LCD image burn-in are excluded from this warranty. LABOR: FUNAI CORP.will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LIMITS AND EXCLUSIONS: THIS WARRANTY IS EXTENDED ONLYTOTHE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCTTO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center.This limited warranty does not apply to any product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP.,or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP.AND ITS REPRESENTATIVESOR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BYTHE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVESIN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRCOSTS WILL BE CHARGED. IMPORTANT: THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATETO STATE. IF,AT ANYTIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. ATTENTION: FUNAI CORR RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS: To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP.will not reimburse you for any service done by unauthorized service providers without prior written approval. To locate your nearest AUTHORIZED SERVICE CENTER or for general please contact us at: FUNAI CORPORATION Customer Service Tel : 1-800-968-3429 http'//www.SylvaniaConsumerElectro 19900 Printed in China Van Ness Avenue, Torrance, service inquiries, nics.com CA 90501 A71AOUH 1 EMN22136 .........
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 39 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Fri Jun 29 11:11:12 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools