Sylvania LC370SS8 User Manual LCD TELEVISION Manuals And Guides L0705191
SYLVANIA LCD Television Manual L0705191 SYLVANIA LCD Television Owner's Manual, SYLVANIA LCD Television installation guides
User Manual: Sylvania LC370SS8 LC370SS8 SYLVANIA LCD TELEVISION - Manuals and Guides View the owners manual for your SYLVANIA LCD TELEVISION #LC370SS8. Home:Electronics Parts:Sylvania Parts:Sylvania LCD TELEVISION Manual
Open the PDF directly: View PDF 
.
Page Count: 39
| Download | |
| Open PDF In Browser | View PDF |
SYLVANIA
37" Digital / Analog
LCDTV
Owner's Manual
LC370SS8
;iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_ii_i_
/
HEGHDEnNmoNTELEWS_
DD_
DiG|TAL
.....
TO RECEIVE
DiGITAL/ANALOG
YOU
MUST CONNECT
ANTENNA.SIGNAL, ]
WARNING:TO
REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
THIS SYMBOL INDICATES THAT DANGEROUS
VOLTAGE CONSTITUTING
A RISK OF ELECTRIC
SHOCK IS PRESENT WITHIN THIS UNIT.
CAUTION:
TO REDUCE
THE RISK OF ELECTRIC
THIS SYMBOL INDICATES THAT THERE ARE
SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER
SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
IMPORTANT
QUALIFIED
ACCOMPANYING
OPERATING AND MAINTENANCE
INSTRUCTIONS
SERVICE PERSONNEL.
IN THE LITERATURE
THE APPLIANCE.
The important noteis locatedon the rear of the cabinet.
Important
Safeguards
I
READ INSTRUCTIONS - All the safety and operating instructions
should be read before the appliance is operated.
RETAIN INSTRUCTIONS - The safety and operating instructions
should be retained for future reference.
3 HEED WARNINGS - All warnings on the appliance and in the
operating instructions should be adhered to.
4_ FOLLOW INSTRUCTIONS - All operating and use instructions
should be followed.
_: CLEANING - Unplug TV from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
EXCEPTION: A product that is meant for uninterrupted
service and,
that for some specific reason, such as the possibility of the loss
of an authorization
code for a CATV converter, is not intended to
be un plugged by the user for cleaning or any other purpose, may
exclude the reference to unplugging the appliance in the cleaning
description otherwise required in item 5.
ATTACHMENTS - Do not use attachments not recommended by
theTV manufacturer as they may cause hazards.
7 WATER AND MOISTURE - Do not use this TV near water, for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub,
in a wet basement, or near a swimming pool, and the like.
_o ACCESSORIES- Do not place this TV on an
unstable cart, stand, tripod, bracket, or table.The
TV rnay fall, causing serious injury to someone, and
serious damage to the appliance. Use only with a
cart, stand, tripod, bracket, or table recommended !
by the manufacturer, or sold with the TV.
Any mounting of the appliance should follow
the manufacturer's
instructions and should
use a mounting accessory recommended
by
the manufacturen An appliance and cart combination
should be
moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
AMEUBLES - Cet appareil ne doit 6tre plac_
que sur un meuble (avec ou sans roulettes)
recommand_ par le fabricant. Si vous I'
installez sur un meuble _ roulettes, d_placez
les deux ensembles avec precaution. Un arrGt
brusque, I'utilisation d'une force excessive
et des surfaces irr_guli_res risquent de
d_stabiliser I'ensemble et de le renversen
VENTILATION - Slots and openings in the
cabinet and the back or bottom are provided for ventilation
and to ensure reliable operation of the TV and to protect it from
overheating, these openings must not be blocked or covered.The
openings should never be blocked by placing theTV on a bed,
sofa, rug, or other similar surface. This TV should never be placed
near or over a radiator or heat registen This TV should not be
placed in a built-in installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer's instructions
have been adhered to.
1 POWER SOURCES - This TV should be operated only from the type
of power source indicated on the marking label. If you are not su re
of the type of power supply to you r home, consult you r appliance
dealer or local power company. For TVs intended to operate from
battery power, or other sources, refer to the operating instructions.
% GROUNDING OR POLARIZATION -ThisTV is equipped with a
EN
polarized alternating-current
line plug (a plug having one blade
wider than the other). This plug will fit into the power outlet only
one way. This is a safety feature. If you are unable to insert the plug
fully into the outlet, try reversing the plug. If the plug should still
fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug.
1 _;_POWER-CORD PROTECTION - Power-su pply cords should be
routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to
cords at plugs, convenience receptacles, and the point where they
exit from the appliance.
"__ OUTDOOR ANTENNA GROUNDING - If an outside antenna or
cable system is connected to theTV, be sure the antenna or cable
system is grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70, provides information
with respect to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-discharge
unit, connection to grounding electrodes, and requirements for
the grounding electrode. (Fig. A)
FIGURE
A
EXAMPLE OF ANTENNA GROUNDING AS PER
......
_-_-_-
--I__--_--
NATIONAL ELECTRICAL CODE
NEC NATIONAtFLECTRICAL
CODE
ELECTRODE
SYST_
CNEC
A_T 2_0, PARTH)
14 LIGHTNING - For added protection for this TV receiver du ring a
lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the TV due
to lightning and power-line surges.
1 _?POWER LINES - An outside antenna system should not be located
in the vicinity of overhead power lines or other electric light of
power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits as
contact with them might be fatal.
'/
OVERLOADING - Do not overload wall outlets and extension
cords as this can result in a risk of fire or electric shock.
7 OBJECT AND LIQUID ENTRY - Never push objects of any kind into
this TV th rough openings as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock.
Never spill liquid of any kind on the TV.
8 SERVICING - Do not attempt to service this TV you rself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
1__ DAMAGE REQUIRING SERVICE - Unplug this TV from the wall
outlet and refer servicing to qualified service personnel under the
following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled, or objects have fallen into theTV.
c. IftheTV has been exposed to rain or waten
d. If the TV does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the
operating instructions, as improper adjustment of other controls
may result in damage and will often require extensive work by a
qualified technician to restore the TV to its normal operation.
e. If the TV has been dropped or damaged in any way.
f. When the TV exhibits a distinct change in performance, this
indicates a need for service.
:t!_:_REPLACEMENT PARTS - When replacement parts are required, be
sure the service technician uses replacement parts specified by
the manufacturer that have the same characteristics as the original
part. Unauthorized substitutions
may result in fire, electric shock,
injury to persons or other hazards.
:;!I SAFETY CHECK- Upon corn pletion of any service or repairs to this
TV, ask the service technician to perform routine safety checks to
determine that the TV is in proper operating condition.
:_!;:_ HEAT- This TV product should be situated away from heat sources
such as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
iiiiii'
i i¸i¸i¸
[] Precautions
_)
LAMP
_i!_i_i_i
_
!iiii_
IN LCD CONTAINS
MERCURY,
DISPOSE
ACCORDING
TO LOCAL,
STATE OR FEDERAL
LAW.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION:
POUR
LES CHOCS ELECTRIQUES,
LAME LAFOND.
PLUS LARGE DE LA FICHE DANS LA
BORNEEVlTER
CORRESPONDANTE
DE LA PRISEINTRODUIRE
ET POUSSER LA
JUSQU'AU
FCC WARNING
This equipment
may generate or use radio frequency
energy. Changes or modifications
to this equipment
may cause harmful interference unless the modifications are expressly approved in the manual.The user
could lose the authority to operate this equipment if an unauthorized change or modification is made.
RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCCRules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment
generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1}
2)
3}
4)
Reorient
Increase
Connect
Consult
or relocate the receiving antenna.
the separation between the equipment and receiver.
the equipment into an outlet on a circuit different from that to which the receiver is connected.
the dealer or an experienced radio/TV technician for help.
This Class B digital
Cet appareil
This reminder
apparatus
num_rique
is provided
for proper grounding
complies
with Canadian
de la classe Elest conforme
ICES-O03.
_ la norme
to carl the CATV system installer's
and, in particular,
i
NMEI-O03 du Canada.
attention
specifies that the cable ground
to Article
820-40 of the NEC that provides guidelines I
should be connected
to the grounding
system of the I
building as close to the point of cable entry as practical.
]
EN
LOCATION
For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place for its installation:
. Shield it from direct sunlight and keep it away from sources of intense heat.
. Avoid dusty or humid places.
. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the top and bottom of the
unit. Do not place the unit on a carpet because this will block the ventilation holes.
. Install the unit in a horizontal position.
. Avoid locations subject to strong vibration.
. Do not place the unit near strong magnetic fields.
. Avoid moving the unit to locations where temperature differences are extreme.
. Be sure to unplug the AC power cord from the outlet before carrying the unit.
TO AVOID THE HAZARDS
.
.
.
.
OF ELECTRICAL
SHOCK
AND
FIRE
Do not handle the power cord with wet hands.
Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.
If, by accident, water is spilled on the unit, unplug the power cord immediately and take the unit to our authorized service center for
servicing.
Do not place anything directly on top of the unit.
The serial number
of this product
may be found on the back of the unit. No others have the same serial number
You should record the number and other vital information
chase to aid identification
in case of theft.
ate of purchase
ealerpurchasefrom
Note about
here and retain this book as a permanent
dealer phone No.
model No.
as yours.
record of your pur-
serial No
dealer address
recycling:
This product's
packaging
]
materials
are recyclable
and can be reused. Please dispose of any materials
in accordance
with I
your local recycling regulations.
I
Batteries should never be thrown away or incinerated
chemical wastes.
_Niied
owner's
but disposed of in accordance
with your local regulations
Accessories
manual
quick start guide
remote control
batteries
(1EMN22176)
(NFO15UD)
(AA x 2)
(1 EMN22137)
. If you need to replace these accessories, please refer to the part No. with the illustrations
customer support line found on the cover of this manual.
• Depending
on your antenna
Contact your local electronics
[] SS=ymbolsUsed
system, you may need different
types of combiners
for the symbols
used in this manual.
: Digital TV operation
: Analog TV operation
. If neither
symbol appears under the function
heading,
operation
is applicable
and call our toll free
(mixers) or separators
store for these items.
in this Manual
The following
is the description
Description refers to:
EN
concerning
to both.
(splitters).
_Features
[] Contents
• DTV/TVlCATV
IN/RODUCT
- You can use your remote control to select channels
which are broadcast in digital, conventional
analog,
standard definition, and high definition formats.
Also, cable subscribers can access their cable TV
channels.
• Program Information
Display (DTV only)
- You can display the title, contents and other
information
of the current DTV program on the TV
screen.
• Auto Channel Scan
- This unit automatically
scans and memorizes
channels available in your area, eliminating
difficult
setup procedures.
• V-chip
- This feature allows you to block children's
inappropriate
programs.
access to
• Closed Caption Decoder
- Built-in closed caption decoder displays text for
closed caption supported programming.
• MTS/SAP Tuner
- Audio language
control.
can be selected from the remote
• Auto Shut Off Function
- If there is no signal input from the antenna terminal
and no operation for 15 minutes, the unit will turn
off automatically.
• Sleep Timer
- This feature will automatically
of the unit at a specific time.
turned
off the power
• Choices for On-screen Language
- Select your on-screen language:
English, Spanish or French.
• Stereo Sound Function
• PLL Frequency Synthesized Tuning
- Provides free and easy channel selection and lets
you tune directly to any channel using the channel
number buttons on the remote control.
• Resume
- This unit automatically
power failure occurs.
HDMI Input
memorizes
settings
ira
ON
Precautions......................................................
3
SuppliedAccessories
..............................................
SymbolsUsedinthis Manual.......................................
Features.........................................................
RemoteControlFunction..........................................
4
4
S
6
Installingthe Batteries............................................
ControlPanel.....................................................
RearPanel.......................................................
6
7
7
CONNEC
ON
BasicConnection..................................................
ExternalDeviceConnection........................................
/I",/A
SE//
8
9
N(i
Initial Setup.....................................................
Main Menu......................................................
AutoChannelScan...............................................
13
14
14
LanguageSelection..............................................
15
WA/CiqNG
TV
ChannelSelection................................................
16
VolumeAdjustment..............................................
Still Mode.......................................................
16
17
SwitchingEachMode.............................................
SwitchingAudioMode ...........................................
ScreenInformation ..............................................
17
18
19
TVScreenDisplayMode...........................................
SleepTimer.....................................................
20
21
OPTONA
SET
NG
ChannelList.....................................................
22
ManualRegister.................................................
AntennaConfirmation............................................
23
23
PictureAdjustment ..............................................
SoundAdjustment...............................................
24
25
ClosedCaption...................................................
DTVClosedCaption...............................................
C(Style.........................................................
V-chip..........................................................
PCSettings......................................................
HDMIAudio .....................................................
26
27
28
30
33
34
/ROUBLES!
i i}
OO/ NG
Troubleshooting
Guide...........................................
35
Glossary........................................................
Maintenance....................................................
37
37
CableChannelDesignations
.......................................
GeneralSpedfications............................................
ElectricalSpecification............................................
Other Specifications.........................................
38
38
38
38
PC Input
Component
S-video
Video
Input
Input
AV Input
Digital Audio Coaxial
Output
LimitedWarranty....................................
Backcover
© 2007 Funai Electric Co., Ltd.
All rights reserved. No part of this manual may be reproduced,
copied, transmitted,
disseminated,
transcribed,
downloaded
any storage medium, in any form or for any purpose without the express prior written consent of Funai.
Furthermore,
any unauthorized
commercial
distribution
of this manual or any revision hereto is strictly prohibited.
Information
in this document
is subject to change without notice.
obligation
to notify any person or organization
of such changes.
F'UNAI with
the _'_ design
is a registered
trademark
of Funai Electric
Funai reserves the right to change
the content
herein
Co., Ltd and may not be used in any way without
or stored
without
in
the
the express written
consent of Funai. All other trademarks
used herein remain the exclusive property of their respective owners. Nothing contained
in this
manual should be construed as granting, by implication
or otherwise, any license or right to use any of the trademarks displayed herein.
Misuse of any trademarks
or any other content in this manual is strictly prohibited.
Funai shall aggressively
enforce its intellectual
property
rights to the fullest
extent
of the law.
EN
i
[] Remote
Control
Function
1.
2.
POWER button
(p13)
Press to turn the unit on and off.
11. SLEEP button
Number buttons (p16)
• Press to select channels.
- button
12. AUDIO button
(p18)
Digital Mode (DTV)
Press to select the audio language.
Analog Mode (TV)
Press to select the audio mode.
• Press to shift the minor channel
3,
from the major channel.
SETUP button (p14)
13. STILL button
3
S.
5
6
6.
8
through
the items.
of
15. INFO button (p19)
Digital Mode (DTV)
• Press to display the channel
when the main menu is
displayed.
BACK button
information,
menu
• Press to display the channel
operation.
7,
CH RETURN button
number,
(p16)
VOL.
/
buttons(p16)
input mode, signal type and TV
MUTE button
(p16)
Press to turn the sound on and off.
setting.
16. CH _/V buttons
(p16)
Press to select channels and the
10. INPUT SELECT button (p17)
• Press to access connected
external
Mode
• Press to display the external
Press to adjust the volume.
9.
signal type and TV
setting.
External input
Press to return to previous
channel.
8,
signal type and TV
setting.
Analog Mode (TV)
(p19)
Press to return to previous
(p20)
Press to select aspect ratio
available for the TV screen.
ENTER button (p13)
Press to decide tile command
setting
7--
14. SCREEN MODE button
_ / !_ / A / T buttons (pl 3)
Press to move left/right/up/
down
4
(pl 7)
Press to pause screen image.
Press to display the main menu.
4.
(p21)
Press to activate the sleep timer.
external
input mode.
device like a DVD
player or VCR.
[] Installing
Install the batteries
Battery
.
.
•
•
EN
the Batteries
(AA x 2) matching
tile polarity
indicated
inside battery
compartment
of the remote
control.
Precautions:
Besure to follow the correctpolarity as indicated in the battery compartment. Reversedbatteries may cause damage to the device.
Do not mix different types of batteries together (e.g.,Alkaline and Carbon-Zinc) or old batteries with fresh ones.
If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
Do not try to recharge batteries; they can overheat and rupture.
[] Control
Panel
side of this unit
1.
POWER button (p13)
Press to turn the unit on and off.
2,
INPUT SELECT button
(pl 7)
• Press to access connected an external
,
3
device like a
of setting
when the
menu is displayed.
CHANNEL _/V buttons
(p16)
Press to select channels or move up/down
3.
'4
,5
DVD p_ayer or VCR.
Press to decide the command
through
....
....
the
main menu items,
4.
VOLUME/7
buttons
(p16)
Press to adjust the volume
or move right ( " )/left
(
)
:
through the main menu items.
S. SETUP button (p14)
Press to display the main menu.
Infrared
Sensor Window
6.
Receives infrared
control.
rays transmitted
from the remote
[] Rear Panel
rear of this unit
1.
PC-IN jack (p12)
VGA cable connection
2.
HDMIIN jacks (p9)
HDMI connection foran
3.
AUDIO IN jacks (pg)
RCA audio cable connection
for PC.
HDMI device.
fora DVI device. (For
HDMI l-IN jack only)
4.
5.
....
AUDIO OUT jacks (p11)
RCA audio cable connection
for an external
device.
,_
Use analog audio input jacks of an external
device.
!_:
DIGITAL AUDIO OUT (COAXIAL) jack (pl 1)
Digital audio coaxial cable connection
an audio receiver.
for a decoder
Use digital audio input jack of an external
6.
7.
ANT. IN jack (p8)
RF coaxial cable connection
8.
9
12
rear of this unit
device .....
for your antenna
or cable
AC outlet to supply power to
PC-IN AUDIOjack(p12)
Mini-plug audio cable connection
....
for PC.
Use line out jack of a PC,
11
side of this unit
',
box.
AC power cord
Connect to a standard
this unit.
8
or
9. AUDIO input jacks (plO)
RCA audio cable connection
for an external
device.
10. VIDEO input jack (pl 1)
RCA video cable connection
foran external
device.
11. S-VIDEO input jack (plO)
S-video cable connection
for an external device,
12. COMPONENT and AUDIO input jacks (pl0)
Component
connection
video cable and RCA audio cable
for an external device.
Use component video and audio output
external device.
jacks of an
EN
[] Basic Connection
Thissection describeshowto connectthe unit to an antenna, cable/satellite box,etc.
Note:
. Besureyour antenna or other device is connected properly before plugging in the power cord.
[Antenna
Cable Connection]
When connectinq
Connect
the unit to an antenna
or cable TV company
(without
the RFcoaxial cable on your home outlet to the antenna
cable/satellite
box)
input jack of this unit.
rear of this unit
RF coaxial
cable
cableTV
company
* Once connections
Channel scanning
(Refer to "Initial
are completed,
turn on the unit and begin initial setup.
is necessary for the unit to memorize
all available
channels
in your area.
Setup" on page 13.)
Note:
• Foryour safety and to avoid damage to device, please unplug the RF coaxial cable from the antenna input jack before moving the unit.
• If you use an an tenno to receive analog TV, it should also work for DTV reception. Outdoor or attic an tennos will be more effective than
settop versions.
. To easily switch your reception source between antenna and cable, install on antenna selector.
• If you connect to the cable system directly, contact the CATV installer.
[Connection
Connect
to Cable Box o1 Satellite
Box]
the RFcoaxial cable on your home outlet to the input jack of the cable/satellite
Use another
RF coaxial cable to connect
the antenna
input jack of the unit to the output
box.
jack of the cable/satellite
e,g,)
rear of this unit
satellite
dish
cable/satellite
cable TV
company
* Required
RF coaxial cable
cables and connecting
For more information,
EN
RF coaxial cable
methods
please contact
box
differ depending
your cable/satellite
on the cable/satellite
provider.
box.
box.
O
[] E×ternai
[HDMI
Device
Connection
Connection]
HDMI
(High
single
cable,
Definition
It ensures
Multimedia
that
Interface)
the content
sent
transports
from
high
the source
definition
video
to TV is of the
and multi-channel
highest
possible
digital
audio
through
a
resolution.
rear of this unit
To HDMI 1-IN or
HDMI 2-IN jack
e,g,)
HDMI cable
]
l
DVD player with
_o
the HDMI output
jack
Note:
. Th_sun_tacce_ts48_/48_/72_/1_8_vide_signa_s_and32kHz/44_1kHz/48kHzaud_signa_s_
, This unit accepts only 2 channel audio signal (LPCM).
• Youneed to select "PCM"for the digital audio output of the device connected or the HDMI audio setting. There may be no audio output ff
you select "Bitstream" etc.
, This TVonly accepts signals compfiant with EIA861.
[HDMI-DVI
Connection]
If your video device has a DVI output jack, connect
using a HDMI-DVI conversion
cable.
i ::i
rear of this unit
ii •
HDMI-DVI
conversion
cable
To HDMI l-IN jack
e.g.)
Cable box or satellite box
with the DVl output jack
To AUDIO IN jacks
1!
Note:
•
•
°
.
This unit accepts 480i/480p/720p/10801
video signals.
An HDMI-DVl conversion cable requires a separate audio cable connection as well. As such, only the HDMI 1-IN jack can be used.
Audio signals are converted from digital to analog for this connection.
DVI does not display 480i image that is not compliant with EIA/CEA-861/8d lB.
EN
[Component
VideoCable
Component
Connection]
video connection
Use a component
offers better
video cable to connect
picture quality
for video devices connected
the unit to external
video devices equipped
to the unit.
with component
video output
jacks.
If you connect to the unit's COMPONENT 1 video
COMPONENT 1.
input jack, connect
RCA audio cables to the audio L/R jacks of
If you connect to the unit's COMPONENT 2 video
COMPONENT 2.
input jack, connect
RCA audio cables to the audio L/R jacks of
corn
q
_[gleen)
e.g.)
(Ied)
_
L
_
o
video player
jacksDVD
outputwith the component
Y,OMPONENPbvIDEO
Y
Pb
ouTPr
P
COMPONENT
/
rear of this unit
J
....................
VIDEO OUT
[_
_
_
....
"_!_ _
...............
N
_)
z
r
I
Note:
• This unit accepts 480i/480p / 720p / 1080i video signals.
[S-video
Cable Connection]
S-video connection
offers good picture quality
Use an S-video cable to connect
for video
the unit to external
devices connected
video devices equipped
to the unit.
with S-video output
jack.
If you connect
to the unit's VIDEO 1 S-video input jack, connect
RCA audio cables to the audio L/R jacks of VIDEO 1.
If you connect
to the unit's VIDEO 2 S-video input jack, connect
RCA audio cables to the audio L/R jacks of VIDEO 2.
e.g.)
AUDIO OUT
L
_ I
rear of this unit
S-VIDEO
OUT
m!il;iil;iiii
DVD player with the S-video output
jack
S-video
RCA audio
cable
cable
Note:
• Ifyou connectto the S-videojack and thevideojack at thesametime,the S-videoconnectionwill havepriority.
EN
!
[Video
Connection]
Video connection
offers standard
picture quality for video devices connected
to the unit.
If you connect
to the unit's VIDEO I video
input jack, connect
RCA audio cables to the audio L/R jacks of VIDEO I.
If you connect
to the unit's VIDEO 2 video
input jack, connect
RCA audio cables to the audio L/R jacks of VIDEO 2.
When the audio jack of the video device is monaural,
connect
the RCA audio cable to the audio L input jack,
rear of this unit
e.g.)
}iii¸
AUDIO OUT
L
RI
VIDEO
OUT
i !ii!¸
camcorder
RCA video
cable
VCR
Note:
• If you connect to the S-videolack and the video lack at the same time, the S-video connection will have priority.
[Audio
Output
I
Connection]
[Digital]
If you connect
broadcasting
[Analog]
If you connect
this unit to an external
digital audio device, you can enjoy multi-channel
audio like 5,Ich digital
sound.
this unit to an external
analog audio device, you can enjoy stereo (2 channel)
i
AUDIO
I L
e.g.)
IN
audio.
i
R
i, t
RCA audio cable
Stereo system
ii?!iii
_i!i_iii
e.g.)
rear of this unit
DIGITAL AUDIO
COAXIAL IN
To AUDIO OUT
jack
digital audio
coaxial cable
Dolby
Digital
decoder
To DIGITAL AUDIO
OUTjack
EN
[PCConnection]
This unit is equipped
with a PC-IN jack. If you connect
To monitor
jack
this unit to your PC, you can use this unit as a computer
rear of this unit
VGA cable
To PC-IN jack
e.g.)
mini-plug audio cable
PC
EN
To audio line out jack
To PCqN AUDIO
jack
monitor.
[] initial
Note:
Setup
Thissectionwill guideyou throughtheunit's initialsetting whichincludes
selectinga languagefor your on-screenmenuand auto channelscan,
which automatically scansand memorizesviewable channels.
Before yon begin:
Make sureif the unit isconnectedto antenna or cable.
After making
all the necessary connections,
press
[POWER] to turn on the unit,
POWER
• This operation
_
maytake
• Ifyou connect the cable system directly, contact
installer.
the CATV
. Ifyou press [POWER] or [SETUP] during auto channel
scan, this setting will be canceled.
• The initial auto channel scan function can be executed
for either "Air" or "Cable" only once. When you change the
connection (Air/Cable), set auto channel scan again. (Refer
to page 14.)
• You can cancel or exit the initial auto channel scan menu
by pressing [SETUP].
. If there is no signalinput
from the antenna terminal and
no operation for several seconds after you turn on the unit,
"Helpful Hints" appears. Follow the instructions listed on
the TVscreen.
a few moments.
Use [Cursor _,/Y] to select the on-screen language
from the choices on the right side of the TV screen.
(English / Espa_ol / Fran_ais)
Or
• "Initial
Setup" menu on step 3 will be displayed
selected language
_
Use [Cursor A/Y]
in the
after you press [ENTER].
to select "Air" for TV channels
"Cable" for CATV channels,
or
then press [ENTER].
|
_iii!!_!!
or
1!
• Scanning
and memorizing
of channels start
automatically.
• When the scanning
and memorizing
the lowest memorized
channel
are completed,
in the broadcasting
will be displayed.
EN
Main
Menu
[?1Auto
Thissectiondescribes
theoverviewofthe mainmenudisplayedwhenyou
press[SETUP].Formoredetails, see the referencepageforeachitem.
Themain menuconsistsofthe function setting itemsbelow.
Channel
Scan
If you switchwires(e.g., between antenna and CAW)or if you movethe TV
to a different area after the initial setting, or if you restorethe DTVchannel
you deleted, you will needto perform auto channelscan.
Before you begin:
Makesure if the unit isconnectedto antenna or cable.
Press [SETUP].
Press [SETUP] to display
2
Use [Cursor A/V]
[ENTER].
the main menu.
to select "CHANNEL",
then press
A/Y]
to select "Autoscan",
then press
_,/Y]
to select an appropriate
• EXIT
To exit settings.
• PICTURE
or
You can adjust the picture
(Refer to "Picture
• SOUND
quality.
Adjustment"
on page 24.)
You can adjust the sound quality.
(Refer to "Sound Adjustment"
on page 25.)
• CHANNEL
You can automatically
scan the viewable
and remove those that are undesired.
(Refer to "Auto
• DETAIL
3
Use [Cursor
[ENTER].
channels
Channel Scan" on page 14.)
You can change
or
the display format
for closed
caption, which displays the dialogue ofa TV program
or other information
across the TV screen.
(Refer to "Closed Caption"
Set the viewing
(Refer to "V-chip"
W
on page 26.)
limitations.
on page 30.)
Adjust the position,
screen.
stability
(Refer to "PC Settings"
Use [Cursor
and clarity of the PC
option, then
press [ENTER].
on page 33.)
And select the sound input for the HDMI jack if your
TV is connected to a HDMI device.
or
(Refer to "HDMI Audio" on page 34.)
• LANGUAGE
You can change
the language
French) displayed
(Refer to "Language
(English, Spanish,
on the main menu.
Selection"
on page 1S.)
.
When aerial antenna
.
When connected
is connected,
select "Air".
to CATV, select "Cable".
• Scanning and memorizing
of channels start
automatically.
.
When the scanning
the lowest
EN
and memorizing
memorized
are completed,
channel will be displayed.
©
IC:
Note:
. Ifyou connect
installer.
ii_/ii
[] Lan ug=U_a=ge
Selection
the cable system directly, contact
the CATV
. Ifyou press [POWER] or [SETUP] during auto channel
scan, the setting will be canceled.
. Channel settings will be saved even if the power fails.
. Ifyou need the English menus instead of the Spanish
or French men us you are having, press [SETUP]. Use
[Cursor A /T] to select 'IDIOMA" or "LANGAGE'; then press
[ENTER]. Use [Cursor A/V]
to select "English" then press
[ENTER]. Press [SETUP] to exit the main menu.
° With regard only to the digital channel even after the
scanning is complete if you unplug the AC power cord
before turning off the unit by pressing [POWER], the
channel setting may be lost.
You can choose English, Spanish, or French as your on-screen language.
Press [SETUP] to display the main menu.
2
Use [Cursor
A/V]
to select
"LANGUAGE",
to select
"English",
then
press
[ENTER]_
or
i_
Use [Cursor
"Fran_ais",
A/Y]
then
press
"Espa_ol"
or
[ENTER].
or
_
Press [SETUP]
ii i_i?ii
to exit.
_iii!!_!!
EN
[] Channel
Selection
Selectchannelsby pressing[CHA/V]
[] Volume
or [the Numberbuttons].
• To select the memorized channels, use [CH A/V]
[the Number buttons].
• To select the non-memorized
channels use
[the Number
Adjustment
Thissection describes
how to adjustthe volume.Themute function, which
turnsthesound off andon, isalso described.
or
Use[VOL
/
]toadjusttheaudiovolume.
buttons].
To Use [the Number
When selecting
buttons]
• The volume bar will be displayed at the bottom
the TV screen when adjusting the volume.
analog channel
, The volume bar display will automatically
in a few seconds.
12
Press [MUTE] to turn offand
- When selecting
digital
channel
• "Mute" is displayed
seconds.
original
• Press [CH RETURN] to return to the previously
viewed channel
TV broadcasting:
With its high definition
broadcast,
far surpasses analog broadcasting
and sound quality
What is the minor
digital
broadcasting
in both its picture
channel?
By using high compression technology,
digital
broadcasting
offers a service that enables multiple
signals to send simultaneously.
Therefore,
you can select more than one program
major channel
since digital
distinguishes
between
a single network.
NTSC (analog mode)
broadcasting
multiple
[Air Time)
18:00
per
technology
channels broadcast
by
ATSC (digital mode)
18:30
19:00
19:30
20:00
20:30
major ch
minor channel
==_ : change automatically
_> :change manually by using [CH A/V]
Note:
. "No Signal" will appear on the TVscreen after the minor
channel broadcast is over.
EN
on the sound.
the minor
on the TV screen for a few
Press [MUTE] again or[VOL,
About digital
disappear
12-1
Be sure to press [-] before entering
channel number.
volume.
"/
of
] to recover the
IC:
[] Still
Mode
[] Switching
Youcanfreezethe imageshown on the TVscreen.
Each Mode
Youcan easilyswitch with the remotecontrol to the DTV(ATSC)andTV
(NTSC)or to accessan external devicewhen they are connectedto the unit.
Press [STILL] to pause the image shown on the screen.
Press [INPUT SELECT] or [(:HA]
through
repeatedly
i
to cycle
the input modes.
}
iT
I
"
TV/DTV channel
I
• The sound output
will not be paused.
• If no signal is detected
during
or protected
or
signal is received
still mode, the image remains paused
and the
}i(J̧
sound output will be muted.
• The still function will be released after S minutes.
To cancel still mode, press any button
except
_i!_i_i_i
_
[POWER].
Pressing [(:H V] reverses the direction
of the mode.
To use the video or S-video input jack of VIDEO ] on
the unit, select "Video] 'L
To use the video or S-video input jack of VIDEO 2 on
the unit, select "Video2".
To use the component
video input jack of
COMPONENT ] on the unit, select "Component]'L
To use the component
video input jack of
COMPONENT 2 on the unit, select "Component2'L
To use the HDMI ]-IN jack on the unit, select
"HDMI1 ".
i
To use the HDMI 2-IN jack on the unit, select
"HDMI2".
i
To use the PC-IN jack on the unit, select "PC".
1!
EN
[] Switching
Audio
Mode
This sectiondescribeshowto switchthe audio language.
Press [AUDIO]
to display
the currently
audio mode. While receiving
press repeatedly
channel.
selected
_
an MTS broadcast,
to cycle through
the available
Press [AUDIO] to displaythe
currently
language and the number of available
audio
selected
languages.
_uDiei
/
2
available
When all audio are available
When stereo and monaural
When
SAP and monaural
Press [AUDIO]
repeatedly
to cycle through
the
audio languages.
audio are available
audio
.
are available
Available
languages
differ depending
on the
broadcast. "Other" is displayed when the audio
language cannot be acquired, or the acquired
languages
When only monaural
audio is available
(Cannot
are other than English, Spanish or French.
mode will automatically
disappear
in 4
be switched)
STEREO
: Outputs
stereo-audio
SAP
MONO
: Outputs
second audio program
: Outputs
rounD-audio
• The current
seconds.
EN
. The current
seconds.
mode will automatically
Note:
. Pressing[AUDIO] does not control external audio device.
disappear
in 4
J
[] Screen
Information
Youcandisplaythecurrentlyselected channelor otherinformationsuchas
the audio modeon the TVscreen.
Inthe analog mode,the current channelnumberand the audio modeare
displayed.
In the digital mode,the detailed broadcasting informationforthe current
channelsuchas programtitle, program guidesare displayed.
i
Press [INFO] to display the details of the currently
selected program.
Press [INFO].
i i¸i¸J¸
[Broadcasting
Information]
. The following
• The current
resolutions
channel
number,
audio mode, type of
for video signal, TV aspect ratio, CC and
TV rating are displayed
TV screen.
To clear the display,
at the top-right
corner of the
1
2
information
:3 program
guide
(The program
press [INFO] again.
information
You can also press [BACK].
is displayed.
program title
broadcast station
guide added to broadcasting
is displayed,
4
lines.)
channel
5
audio language
Maximum
display
of 4
number
(Refer to"Switching
Audio
6
effective
scanning
7
program
format
8
program
aspect ratio
9 program rating
1BCC (not available
Mode" on page 18.)
lines and scan mode
iii,_i!_i
ifCC is set to "Off")
9
10
_iii!!_!!,
Note:
. When the program guide consists of more than 4 lines, use
[Cursor _/T]
to scroll.
• "No description provided" is displayed when the program
guide is not provided.
. While the program guide is displayed, the closed caption
function is interrupted.
• In externalinput
mode, the following screen is displayed;
e.g.) When an external device is connected to VIDEO 1
inputjack.
• Available languages differ depending on the broadcast.
. The information
display will automatically
disappear in 4
seconds.
• Pressing [AUDIO] does not control external audio device.
EN
E TV Screen
Display
[Cinema]
Mode
4 types of display modescan beselectedwhen the broadcastingstation
is sending4:3 or 16:9video signal. And3 types of display modescan be
selectedfor PCinput signal.
Press [SCREEN MODE] repeatedly
to switch the TV
Display a vertically
stretched
picture.
[Expand]
Display a horizontally
stretched
picture.
For PC input signal
aspect ratio.
Sidebar
Full
For 4:3 video signal
Full
Sidebar
(normal)
$
Dot By Dot
(normal)
[Sidebar]
Display a proportionately
stretched
picture.
Sidebars
appear on both edges of the screen.
[Full]
Wide
Cinema
Display a picture that is stretched
fill the screen.
[Sidebar]
Display a 4:3 picture at its original
on both edges of the screen.
size. Sidebars appear
[Dot By Dot]
Display a picture
in its original
out of proportion
size.
[Full]
Display a 4:3 picture
stretched
[Cinema]
at a 16:9 size; tile picture
horizontally
is
to fill the screen.
Display a 4:3 picture at a 16:9 size; the picture is
stretched horizontally
and vertically to fill the screen.
This crops out the top and bottom
[Wide]
of the picture.
Display the picture with its center at the original
and the edges stretched horizontally.
For 16:9 video signal
Full
(normal)
Zoom
Expand
Cinema
[Full]
Display a 16:9 picture at its original
[Zoom]
size.
Display a 16:9 picture at its maximum size without
changing its horizontal and vertical ratio,
EN
size
Note:
• Youmay not switch the display mode depending on the
program.
. For PCinput signal, "Sidebar" may not be selectable
depending on the aspect ratio of the input signal.
to
[] Sleep Timer
Thesleeptimer can be setto automatically turn off the unit after an
incrementalperiodof time.
Press [SLEEP]
tO set tile
• Sleep timer display
2
sleep
timer.
appears on the TV screen.
Press [SLEEP] repeatedly
until shut off.
to change the amount
of time
}iiJ̧
_i!_i_i_i
_
!iiii_
• You can set your unit to turn off after a set period
time (from 30 to 120 minutes).
of
• Each press of [SLEEP] will increase the time by 30
minutes.
• After set up, the sleep timer display
for checking
can be called up
by pressing [SLEEP].
To Cancel the Sleep Timer
Press [SLEEP] repeatedly
on the TV screen.
until "Sleep Off" is displayed
iii,_i!_i
Note:
. The sleep timer setting display will automatically
disappear in 4 seconds.
. When you disconnect the unit from the AC outlet or when
a power failure occurs, the sleep timer setting will be
canceled.
_iii!!_!!
1!
EN
Channei
List
Thechannel list function letsyon removeundesiredchannelsfrom the
channelregistration list.
Press [SETUP] to display
2
Use [Cursor
[ENTER].
A/Y]
the main menu.
_
to select "CHANNEL", then press
or
0,_ Use [Cursor A/Y]
[ENTER].
to select "Channel
List", then press
or
d_ Use [Cursor A/y]
to select the channel
you want to
remove, then press [ENTER].
or
• The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CH A/Y].
• To reactivate a removed
[Cursor
A/V]
display
lightens.
channel,
highlight
it using
and press [ENTER]. The channel
° When you remove a major channel,
channels are removed as well.
its minor
Note:
. The channel with the "DTV"indicated
on the display is
ATSC. Otherwise the channel is NTSC.
EN
Press [SETUP] to exit.
[] Manual
Reg.ister
[] Antenna
Themanualregisterfunctionletsyou add thechannelsthat werenot added
bythe auto channelscanduetothe receptionconditionat theinitialsetting.
Press [SETUP] to display
2
Use [Cursor A/V]
[ENTER].
Confirmation
Thisfunctionletsyoucheckthesignal strength ofeachchannel
the main menu.
Press [SETUP] tO display
to select "CHANNEL", then press
2
Use [Cursor A/V]
[ENTER].
the main menu.
to select "CHANNEL", then press
i i¸i¸J¸
or
or
i !ii!
¸
!iiii_
_
Use [Cursor A/V]
to select "Manual
Register", then
_i_ Use [Cursor A/V]
press [ENTER].
to select "Antenna",
then press
[ENTER],
or
or
_,
_
Use [the Number
channel
buttons]
to enter the number
of the
Use [the Number
buttons]
channel for which
you want to check the signal strength.
you want to add, then press [ENTER].
or [CN AIY]
to select the
@@ @
@@@
@@@
@@@
@@@
@@@
....
OF
5
.
Press [SETUP] to exit.
If the channel is set to external
confirm the antenna condition.
input, you cannot
Note:
. If set up completes successfully,"Registered to the Channel
List"is displayed.
. If external inputis used, iris notpossible to register the
channel and "Unawilable" will be displayed on the TV
screen.
_,
i
Press [SETUP] to exit.
EN
[] Picture
Adjustment
Youcanadjust brightness,contrast, color,tint and sharpness.
Cursor_l
Cursor_
to decrease
to increase
brightness
brightness
to decrease
to increase
contrast
contrast
to decrease
color
to brighten
color
to add
to add
Brightness
Press [SETUP] to display the main menu.
Contrast
S_i iiiF _
Color
_
Use [Cursor
A/Y]
to select
"PICTURE", then press
[ENTER].
Tint
or
red
green
Sharpness
to make soft
Reset Settings
Use [Cursor A/Y]
3
Use [Cursor
A/V]
to select the item you want to adjust,
to make clear
to select "Reset", then press [ENTER]
to restore the "Picture Mode"
setting
to default.
then press [ENTER].
or
or
Color Temp,
Use [Cursor
_
Adjust the picture
Picture
quality.
press
A/V]
to select
[ENTER]. (Cool,
Neutral
the desired
setting,
then
and Warm)
Mode
Use [Cursor
Ak/Y] to select the desired
press [ENTER]. (Standard,
Dynamic,
setting,
Movie
then
or
and News)
or
Energy Saving
Use [Cursor _/1_] to adjust the brightness of the backlight.
_
Brightness,
Contrast,
Use [Cursor
_1/I_] to adjust.
Color, Tint, Sharpness
:To brighten
Or
:To darken
or
Note:
• To cancel picture adjustment, press[SETUP].
_
EN
Press [SETUP] to exit.
©
[] Sound
Adiustrnent
Surround
Use [Cursor
You
can
adjust
treble,
bass
and
surround.
function,
i _/ii
A/V]
to turn on or offthe
surround
then press [ENTER].
Press
[SETUP]
todisplay
themainmenu.
or
i!_i i iil :_
W
_
Use [Cursor
_,/Y]
to select "SOUND", then press
[ENTER].
Reset Settings
i iii_!il
Use [Cursor A/Y] to select "Reset", then press [ENTER]
to restore the "Sound" settings to default.
or
or
_
Use [Cursor
_,/Y]
to select the sound type you want to
adjust, then press [ENTER].
Note:
• To concelsoundadjustment,
press[SETUP].
or
_
Press [SETUP] to exit.
_#_,Adjust the sound setting.
Treble,
Bass
Use [Cursor _1/1_] to adjust.
or
Cursor _1
Treble
_
Bass
,
Cursor
!_
to decrease
to increase
higher-pitched
sounds
higher-pitched
sounds
to decrease
to increase
lower-pitched
sounds
lower-pitched
sounds
EN
[] Closed
[Caption Mode]
CCI and Textl;
Caption
Youcanview closedcaptioning (co)for TVprograms,moviesand news.
Closedcaption referto text ofdialogueor descriptionsdisplayedon-screen
for the hearingimpaired.
are the primary
caption
and text services.
The captioning
or text is displayed in the same
language as the program's dialogue
(up to 4 lines of script on the TV screen, where it
_
Press [SETUP] to display the main menu.
does not obstruct
CC3 and Text3;
relevant
serve as the preferred
parts of the picture).
data channels.
The captioning
or text is often a secondary
CC2, CC4, Text2 and Text4;
2
Use [Cursor
AIr]
are rarely available
to select "DETAIL", then press
and broadcasters
language.
use them only
in special conditions, such as when "CCI" and "CC3"
or "Text 1" and "Text3" are not available.
[ENTER].
• There are 3 display modes according
Paint-on mode:
or
Displays input characters
to programs:
on the TV screen
immediately.
Pop-on mode:
Once characters are stored
displayed all at once.
in memory,
they are
Roll-up mode:
3
Use [Cursor
A/V]
to select "Closed Caption",
Displays the characters
(max. 4 lines).
then
continuously
by scrolling
press [ENTER].
_
Press [SETUP] to exit.
or
W
_
Use [Cursor A/Y]
Note:
to select "Conventional
CC", then
press [ENTER].
or
5
Use [Cursor A/V]
to select the desired
then press [ENTER].
or
EN
closed caption,
• To show the closed caption on your TV screen, broadcast
signal must contain the dosed caption data.
. Not all TVprograms and commercials have the closed
caption or all types of the closed caption.
• Captions and texts may not match the TV voice exactly.
. Changing channels may delay the closed caption for a few
seconds.
• Adjusting or muting the volume may delay the dosed
caption for a few seconds.
. Abbreviations, symbols and other grammatical shortcuts
may be used in order to keep pace with the on-screen
acdon. This is not a problem with the unit.
• The caption or text characters will not be displayed while
the main menu or functions display is shown.
. If a black box appears on the TV screen, this means that
the closed caption is set to TEXTmode. To clear the box,
sdect "CC1","CC2;'"CC3","CC4"or "Off'_
• If the unit receivespoor quality television signals, the
captions may contain errors, or there might be no captions
at alL Some possible causes of poor quality signals are:
-Automobile ignition noise
- Electric motor noise
- Weak signal reception
- Multiplex signal reception (ghosts or screen flutter)
• The unit retains the dosed caption setting if the power
fails.
. Closed caption will not be displayed when you are using
an HDMI connection.
• When the unit receives a special effects playback signal
(i.e.,Search, Slow and Still) from a VCR'svideo output
channel (CH3or CH4), the unit may not display the correct
caption or text.
IC]
[] DTV Closed
Caption
In addition to the basicclosed captiondescribedon page26, DTVhasits
own closedcaptioncalled DTVCO.Usethis menuto changethe settings for
DTVCC.
Press [SETUP] to display the main menu.
5
Use [Cursor
caption,
Sii ii)i_
AIr]
to select the desired
DTV closed
then press [ENTER].
!
or
2
Use [Cursor
_,/V]
!
to select "DETAIL", then press
"W/
[ENTER].
or
off
Select one of these
DTV CC
Service1-6
_
Use [Cursor
_,/Y]
to select "Closed Caption",
Select if you do not want
DTV CC.This is the default.
before
changing any other item
in "Closed Caption" menu.
Choose"Servicel"
under
normal circumstances.
then
press [ENTER].
_
Press [SETUP] to exit.
or
SE _iJi _
ii ii_i_ii!i
Note:
• "DTV CC"thatyou can switch differs depending on the
broadcast description.
[_
Use [Cursor
_,/Y]
to select "DTV CC", then press
[ENTER],
or
i
EN
[] CC StyJe
Youcanchangethe style of CCsuchasfont, color or size,etc.
_
Press [SETUP] to display the main menu.
Use [Cursor _,/Y]
to select "On", then press [ENTER].
or
2
Use [Cursor
J,/Y]
to select "DETAIL", then press
[ENTER].
or
_
Use [Cursor A/Y] to select an item, then press
[ENTER]. Then use [Cursor A/y]
to select the desired
setting
and press [ENTER].
Picture display
_
Use [Cursor
_,/Y]
to select "Closed Caption",
then
press [ENTER].
Edge
(Edge Color and EdgeType)
Font
or
(Font Style, Font Size,Font Color and Font Opacity)
Back
(Back Color and Back Opacity)
• The setting
description
for each item is shown below.
[Font Style]
[_
Use [Cursor
[ENTER].
_,/Y]
to select "CC Style", then press
Closed Captioning
font style can be changed
as below.
or
[Font Size]
Font size of the displayed
below.
Use [Cursor
[ENTER].
or
EN
_,/Y]
to select "User Setting",
then press
caption can be switched
as
©
[Font Color]
Font color of the displayed
below.
[Edge Type]
caption
can be switched
as
Edge type of the displayed
below.
caption
can be switched
as
[Font Opacity]
Font opacity of the displayed
as below.
caption
i !ii!¸
can be switched
!iiii_
_
Press [SETUP] to exit,
iT
[Back Color]
Background color of the displayed
switched as below.
[Back Opacity]
Background opacity of the displayed
switched as below.
caption
can be
caption
can be
_iii!!_!!,
[Edge Color]
Edge color of the displayed
below.
caption
can be switched
as
EN
See the following
[] V-chi
description
V-chipreadsthe ratingsfor programs,then deniesaccessto the programs
which exceedthe rating JeveJ
you set. With this function, you can bJock
certain programming inappropriate for children.
for setting
each item.
A
C
Press [SETUP] to display the main menu.
A..."A. MPAA Rating"=> page 31
B.-"B. TV Rating"=>
2
Use [Cursor
[ENTER].
J,/Y]
to select "DETAIL", then press
page 31
C..."C. New Password"
=> page 32
Note:
or
3
Use [Cursor
[ENTER].
A/V]
to select "V-chip",
then press
or
_,
Use [the Number
numbers
buttons]
to enter the 4-digit
for your password.
@@@
@@@
@@@
• When you have not set up your password,
0000.
enter
• When the password
menu is
displayed.
EN
is correct, the "V-chip"
• When you select a rating and set it to "Block'; the higher
ratings will be blocked automatically. The lower ratings
will be available for viewing.
• When you set the highest rating to "View", all ratings turn
to "Wew" automatically.
. To block any inappropriate programming, setyour limits in
"MPAARating", "TV Rating" and "Downloadable Rating"
• The V-chip setting will be retained after a power failure
(except the accesscode reverts to 0000).
. If the rating is blocked, _ will appear.
. "Dovvnloadable Rating" will be available when the unit
receivesa digital broadcast using the new rating system.
• If the broadcasting signal does not have the downloadable
rating information, "Downloadable Rating is currently not
available." will appear.
This message will also appear when you try to access
"Dovvnloadable Rating" after you have cleared the
downloadable rating information, and the new
information has not been downloaded since.
• To dear the downloadable rating information and its
setting, select "Clear Downloadable Rating".
i i ¸¸
i_¸_;:;¸¸
_ __ _
.....
_!:
MPAA
Rating
isthe rating system createdbyMPAA(Motion Picture
Associationof America].
_
Use [Cursor
_,/V]
to select "MPAA Rating", then press
_
[ENTER].
Use [Cursor
_,/Y]
to select "TV Rating", then press
[ENTER].
or
or
c
il_,iii!'i
6
Use [Cursor
_/V]
to select the desired
press [ENTER] repeatedly
and "Block".
rating, then
to switch between
6
Use [Cursor
Alvl4tlIP']
to select the desired
then press [ENTER] repeatedly
"View" and "Block".
"View"
rating,
to switch between
or
Rating
Category
X
Mature audience only
NC-17
No one under 17 admitted
R
Restricted; under 17 requires accompanying
parent or adult guardian
PG-13
Unsuitable for children under 13
PG
Parental guidance suggested
G
General audience
NR
No rating
_
Press [SETUP] to exit.
4
[To Set the Sub Ratings]
programming.
below.
Use [Cursor
_y Press [SETUP] to exit.
i
As for TV-MA, TV-14, TV-PG, or TV-Y7, you can further
set the sub ratings to block specific elements of
To set the sub ratings, follow
A/V/_/1_]
to select the desired
then press [ENTER] repeatedly
"View" and "Block".
the step
rating,
to switch between
Note:
° Changing the category to "Block" or "View" automatically
changes oil its sub ratings to the same ("Block" or "View").
EN
:
Rating
Category
TV-MA
Mature
audience
TV-14
Unsuitable
TV-PG
Parental
TV-G
General audience
TV-Y7
olderAppr°priatefor all children
TV-Y
Appropriate
Sub Rating
only
for children
guidance
higher
under
14
J_
Category
FantasyViolence
V
Violence
S
Sexual Situation
L
Coarse Language
D
Suggestive
Dialogue
_
suggested
Use [Cursor _,/Y]
to select "New Password", then press
[ENTER].
7 and
)_
for all children
FV
Although the default code "0000" issuppliedwith the unit, you can set
your own password.
or
lower
Rating
TV-Y7
TV-PG
TV-14
TV-MA
_
Press [the Number
buttons]
to enter the new 4-digit
password.
• Enter password
field.
TV-PG,TV-14
again in "Confirm
password."
entry
@0@
Note:
. Blocked sub rating will appear beside the main rating
category in "TV Rating" menu.
o You cannot block o sub mdng (D, L, S or V) if the main
rating is set to "View'_
. Changing the category to "Block" or "View" automatically
changes all its sub ratings to the same ("Block" or "View").
@0@
@@@
_
Press [SETUP] to exit.
Note:
• Make sure new password and confirm password must be
exactly the same. If they are different, the space is cleared
for reentering.
. Yourpassword will be erased and return to the default
(0000) when a power failure occurs.If you forget the
password, unplug the power cord for 10seconds to restore
the password to 0000.
EN
[] PC Settings
Thisfunction lets y0n adjust the PCscreenposition, clockand phaseduring
PCinput.
5
Press [SETUP] to display the main menu.
Adjust the setting.
i
Auto Adjustment
Use [Cursor A/Y]
to select "Adjust",
then press
[ENTER].
_l
Use [Cursor
A/Y]
to select "DETAIL", then press
or
[ENTER].
or
w
• The Horizontal/Vertical
position,
the PC screen are automatically
clock and phase of
adjusted.
Horizontal Position, Vertical Position
Use [Cursor _1/_] to adjust.
_
Use [Cursor
[ENTER].
A/Y]
to select "PC settings",
iT
then press
Cursor _1
Horizontal
Position
or
Vertical
Cursor_
to move PC
screen left
to move
to move PC
screen down
to move
PC
screen right
Position
V
PC
screen up
Clock, Phase
_
Use [Cursor A/Y]
to select the setting
Use [Cursor _1/1_] to adjust the "Clock" setting to
stabilize the PC screen and the "Phase" setting to
you want to
improve
adjust, then press [ENTER].
Cursor _
or
_i
Move the unit away from nearby electric appliances, Turn off the power and wait
30 minutes before turning it back on.
• View other TV channels, The problem might be limited to the broadcasting
station.
. Check the antenna or cable connection to the main unit.
• When the outside antenna is used, check the wire condition and connection,
Electrical interference from nearby appliances may affect picture quality,
• View other TV channels, The problem might be limited to the broadcasting
station.
Picture OK, sound poor
. View other TV channels,
No reception
Make sure auto channel scan has been completed
(Refer to "Auto Channel Scan" on
page 14).
Auto channel scan must be completed when you set up the unit for the first time
or move it to a location where previously unavailable channels are broadcast.
• The selected channel may not be broadcasting.
. When auto channel scan is interrupted
and not completed, some channels will not
be received, Make sure to complete (Refer to "Auto Channel Scan"on page 14).
of digital signals
i !ii!¸
. Check the antenna or cable connection to the main unit.
• When the outside antenna is used, check the wire condition and connection,
Electrical interference from nearby appliances may affect picture quality,
• Adjust"Contrast"and
"Brightness" in the main menu,
. View other TV channels, The problem might be limited to the broadcasting
station.
Picture distorted
Different
i i(J̧
The problem
might
be limited to the broadcasting
station.
EN
Theentered
channel
number Many
digital
channels
have
alternate
channel
numbers.
Theunitchanges
the
changes
automatically
numbers
automatically
totheones
signifying
thebroadcasting
stations.
These
are
thenumbers
used
foranalog
broadcasts.
Remote
control
does
notwork •Check
theantenna
orcable
connection
tothemain
unit.
,Check
thebatteries
oftheremote
control.
•Check
ifthereisanobstacle
between
theinfrared
sensor
window
andtheremote
control.
•Test
thesignal
output.
IfOK,thenpossible
infrared
sensor
trouble.
(Refer
to"IRSignal
Check"
onpage37.)
•Aimtheremote
control
directly
attheinfrared
sensor
window
onthefrontofthe
unit.
Reduce
thedistance
totheunit.
Re-insert
thebatteries
withtheirpolarities
(+/-signs)
asindicated.
Problems with Closed Caption Feature
Misspelled
displayed,
captions
are
Captions are not entirely
displayed, or captions are
delayed behind the dialogue,
Captions are displayed as a
white box.
No caption is displayed in the
closed caption-supported
program.
, Closed captioning
production
companies may broadcast
correcting the misspelling in a live broadcast.
without
, Captions that are delayed a few seconds behind the actual dialogue are common
for live broadcasts. Most captioning production companies can display a dialogue
to a maximum of 220 words per minute. If a dialogue exceeds that rate, selective
editing is used to insure that the captions remain up-to-date with the current TV
screen dialogue.
Interference from buildings or weather conditions may cause captioning
to be
incomplete.
Broadcasting station may shorten the program to insert advertisement.
The closed
caption decoder cannot read the information
of the shortened program.
No caption is displayed
when playing the videotape
containing
captions.
, The videotape may be illegally
read during copying.
Black box is displayed
TV screen.
• "Text" mode is selected for caption.
in the
programs
copied, or the caption
signal might
not have been
Select "CC1 ", "CC2", "CC3", "CC4"or "Off".
Note:
• The LCDpanel is man ufactured to provide many years of useful life. Occasionally a few non active pixels may appear asa fixed point of
blue, green or red. This is not to be considered a defect in the LCD screen.
. Some functions are not available in specific modes, but this is not a malfunction. Read the description in this owner's manual for more
details on correct operations.
EN
[]Glossary
ATSC
Dolby
Acronym
that stands for Advanced
Digital
Password
The system developed
by Dolby
A stored 4-digit
number
that allows
Television Systems Committee and
the name of the digital broadcasting
standards.
Laboratories to compress digital
sound. It offers stereo sound (2ch) or
multkhannel
audio.
access to parental control
Aspect Ratio
HDMI (high-definition
separately from main-audio channel.
This audio channel is used as an
The width
ofa TV screen relative
height. Conventional
to its
TVs are 4:3 (in
Interface that supports
other words, the TV screen is almost
uncompressed,
square); widescreen models are 16:9
(the TV screen is almost twice as wide
formats
as its height).
Component
set-top
player or digital
HDTV (high definition
that
Ultimate
colors of
high resolution
each of 3 principal
over a
light (red, blue and green) through
different signal lines.This allows the
to experience
in bilingual
!y:
broadcasting.
definition
digital format
TV)
that is similar
S-video
that produces
and high picture
i !ii!¸
Offers higher
delivering
quality
images by
each signal,color
(c) and
luminance (y) independently
of each
other through separate cables.
quality.
NTSC
picture colors
as it is.There are several
signal formats,
andY/Cb/Cr.
Standard
program)
to the NTSC picture quality.
TV)
digital format
audio
channel delivered
SDTV (standard
box, DVD
television,
Second-audio
alternate
single cable.
Video
conveys
as original
all
digital audio/video
including
This is a video signal format
viewers
multimedia
interface)
SAP (secondary
features,
including
Y / Pb / Pr
Acronym that stands for National
Television Systems Committee and
the name of the current
broadcasting
iT
analog
standards.
[] Maintenance
• Wipe the front panel and other exterior surfaces of the unit with a
soft cloth immersed in lukewarm water and wrung dry.
• Never use a solvent or alcohol. Do not spray insecticide liquid near
the unit. Such chemicals may cause damage and discoloration to
the exposed surfaces.
If the remote control isnot working properly, you can use an AM
radio or digital camera (including a cellular phone with built-in
camera) to see if it is sending out an infrared signal.
• With an AM radio:
Tune the AM radio station to a non-
ii i}ii!i
ii ii!
tii_
i!ii!iii!
broadcasting frequency. Point the remote
D o
.
.,
II
Wipethe panelof the unit with asoft cloth. Beforecleaningthe
panel,disconnectthe powercord.
control towards it, push any button and
listen. If the sound from the radio flutters,
it isreceivingthe remote control's infrared
signal.
e
Shouldyourunitbecomeinoperative,do not try to correctthe
problemyourself.Therearenouserserviceableparts inside.Turn
off the unit, unplugthe powercordandcall ourtoll free customer
support linefound onthe coverof this manualto locatean
authorizedservicecenter.
• With adigital camera
(includingbuilt-in cell phonecameras):
Pointa digital cameratowards the remotecontroL.
Pushany button onthe remotecontrol andlook
through the digital camera.If the infraredlight
appearsthrough the camera,the remotecontrol is
working.
EN
[] Cable
Channel
Designations
If y0u subscribeto cableTV,the channelsare displayedas1-135.
Cablecompaniesoften designatechannelswith lettersor letter-numbercombinations. Pleasecheckwith your localcablecompany.
Thefollowing isa chart of common cablechanneldesignations.
TVDisplay
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
TVDisplay
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
TVDisplay
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
TVDisplay
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
TVDisplay
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
TVDisplay
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
TVDisplay
127
128
129
130
131
132
133
134
135
[] General
TV format:
Closed
Specifications
ATSC
/ NTSC-MTVstandard
system:
§15.122/FCC
(digital CC) §15.119/FCC
(analogCC)
Channel coverage (ATSC/NTSC):
Terrestrial
VHF: 2~13 UHF: 14~69
Specification
lOW,BOx2
caption
CATV
2~13, A_W, W+l _w+g4 (analogW+l _W+84),
A-S~A-1,SA
Tuning system: Channelfrequency synthesizedtuning system
Channel access: Directaccesskeyboard,
Programmablescan,and up/down
Terminals:
Antenna input: VHF/UHF/CATV
750 unbalanced(F-type)
S-videoinput: Mini DIN4-pinjackx 2 Y:1Vp-p(750)
(: 286mVp-p (750)
Video input:
RCAjackx 2
1Vp-p(750)
Audio input:
RCAjack(L/R)x 10
2Vrms
(input impedance:morethan 22k0)
Component video input:
RCAjackx6
Y: 1Vp-p(750)
Pb:700mVp-p(750)
Pr: 700mVp-p(750)
HDMIinput:
HDM119pinx 2
PCinput:
D-Sub1Spin x 1 (RGB)
Mini jack o3.Smm x 1 (audio)
Coaxialdigital audio output:
RCAjackxl
S00mVp-p(750)
Analogaudio output:
RCAjackx2
EN
[] Electrical
Sound output:
[] Other
Specifications
Remote control: Digitalencodedinfrared lightsystem
Operating
temperature:
41°F(5°C)to 104°F(40°C)
Power requirements:
120VAC+/- 10%,60Hz+/- 0.5%
Power consumption
(maximum):
220W
LCD:
Dimensions:
Weight:
37 incheswideXGApanel
W:37.5 inches
H: 26.5 inches
D: S.0inches
(9S0mm)
(672.5mm)
(126.5mm)
W:37,5 inches
H: 28.1 inches
D: 11.5 inches
(950mm)
(713mm)
(290mm)
45.5 Ibs.
(20.6kg)
• Designsand specificationsare subject to changewithout notice and
without our legal obligation.
• If there is a discrepancy
betweenlanguages,the default languagewill
be English.
SYLVAMIA
LiMiTED WARRANTY
FUNAI CORP.will repair this product,
workmanship
as follows:
free of charge in the USA in the event of defect in materials or
DURATION:
PARTS:
FUNAI CORP.will provide parts to replace defective parts without charge for one (1) year
from the date of original retail purchase. Certain parts and LCD image burn-in are excluded
from this warranty.
LABOR:
FUNAI CORP.will provide the labor without charge for a period of ninety (90) days from the
date of original retail purchase.
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLYTOTHE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR
OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCTTO
OBTAIN SERVICE UNDER THIS WARRANTY.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced,
missing or if service was attempted by an unauthorized
service center.This limited warranty does not
apply to any product not purchased and used in the United States.
This warranty only covers failures due to defects in material or workmanship which occur during
normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs,
alterations or products not supplied by FUNAI CORP.,or damage, which results from accident, misuse,
abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use
such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or
other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL),
ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
FUNAI CORR AND ITS REPRESENTATIVESOR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL,
INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BYTHE USE OF OR THE
INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING
THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
DISCLAIMED BY FUNAI AND ITS REPRESENTATIVESIN THE UNITED STATES.
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER.
THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO
PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRCOSTS WILL BE
CHARGED.
IMPORTANT:
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY
FROM STATETO STATE. IF,AT ANYTIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN
SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION:
FUNAI CORR RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT
WITHOUT PRIOR NOTICE.
WARRANTY STATEMENT REGARDING NON AUTHORIZED
REPAIRS:
To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its
original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE
CENTER. FUNAI CORP.will not reimburse you for any service done by unauthorized service providers
without prior written approval.
To locate yOUr nearest AUTHORIZED
please
contact
SERVICE CENTER or for general
service
inquiries,
us at:
FUNAI CORPORATION
Customer Service
Tel : 1-800-968-3429
http:llwww.SylvaniaConsumerElectronics.com
19900
Printed
in China
Van
Hess Avenue,
Torrance,
CA 90501
A71 GOUH
1EMN22137
_.......
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.2 Linearized : No Page Count : 39 Page Layout : SinglePage Page Mode : UseNone Producer : Goby Monitor Application version 3, 2, 1, 4 Create Date : Fri Jun 29 11:24:02 2007 Author : Title : Subject :EXIF Metadata provided by EXIF.tools