Symbol Technologies AR4126 RFID SYSTEM User Manual AR400 UserManual
Symbol Technologies Inc RFID SYSTEM AR400 UserManual
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 545395 |
| Application ID | qkC86RpL0y+7H0Qwi0JM5g== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 79.09kB (988685 bits) |
| Date Submitted | 2005-05-25 00:00:00 |
| Date Available | 2005-05-25 00:00:00 |
| Creation Date | 2005-05-20 13:15:44 |
| Producing Software | Acrobat Distiller 6.0.1 (Windows) |
| Document Lastmod | 2005-05-20 13:15:44 |
| Document Title | Microsoft Word - AR400_UserManual.rtf |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | jpfeifer |
AR400 RFID Reader Integrator Guide 72E-71810-01 Revision .1 April 2005 © 2005 by Symbol Technologies, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Symbol. This includes electronic or mechanical means, such as photocopying, recording, or information storage and retrieval systems. The material in this manual is subject to change without notice. The software is provided strictly on an “as is” basis. All software, including firmware, furnished to the user is on a licensed basis. Symbol grants to the user a non-transferable and non-exclusive license to use each software or firmware program delivered hereunder (licensed program). Except as noted below, such license may not be assigned, sublicensed, or otherwise transferred by the user without prior written consent of Symbol. No right to copy a licensed program in whole or in part is granted, except as permitted under copyright law. The user shall not modify, merge, or incorporate any form or portion of a licensed program with other program material, create a derivative work from a licensed program, or use a licensed program in a network without written permission from Symbol. The user agrees to maintain Symbol’s copyright notice on the licensed programs delivered hereunder, and to include the same on any authorized copies it makes, in whole or in part. The user agrees not to decompile, disassemble, decode, or reverse engineer any licensed program delivered to the user or any portion thereof. Symbol reserves the right to make changes to any software or product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein. No license is granted, either expressly or by implication, estoppel, or otherwise under any Symbol Technologies, Inc., intellectual property rights. An implied license only exists for equipment, circuits, and subsystems contained in Symbol products. Symbol, Spectrum One, and Spectrum24 are registered trademarks of Symbol Technologies, Inc. Bluetooth is a registered trademark of Bluetooth SIG. Microsoft, Windows and ActiveSync are either registered trademarks or trademarks of Microsoft Corporation. Other product names mentioned in this manual may be trademarks or registered trademarks of their respective companies and are hereby acknowledged. Symbol Technologies, Inc. One Symbol Plaza Holtsville, New York 11742-1300 http://www.symbol.com Patents This product is covered by one or more of the patents listed on the website: www.symbol.com/patents Contents About This Guide Introduction ......................................................................................................................... ix Chapter Descriptions ........................................................................................................... ix Notational Conventions ....................................................................................................... ix Related Documents and Software....................................................................................... ix Service Information...............................................................................................................x Symbol Support Center................................................................................................................x Chapter 1. Getting Started Introduction ...................................................................................................................... 1-3 RFID Technology.............................................................................................................. 1-3 RFID Components ..................................................................................................... 1-3 The AR400 RFID Reader ................................................................................................. 1-4 Multiple Connection Options ...................................................................................... 1-4 Flexible Read Point Configurations............................................................................ 1-4 Configuration and Upgrading ..................................................................................... 1-4 Tag Management ....................................................................................................... 1-5 Event Management .................................................................................................... 1-5 Device Management .................................................................................................. 1-5 Security ...................................................................................................................... 1-5 LEDs ................................................................................................................................. 1-6 Chapter 2. Installation and Communication AR400 Physical Connections .......................................................................................... 2-3 Installing the AR400.......................................................................................................... 2-3 Mounting Tips............................................................................................................. 2-3 Mounting the AR400 .................................................................................................. 2-4 Connecting Antennas to the AR400........................................................................... 2-4 Portal Setup ............................................................................................................... 2-4 Powering the AR400 .................................................................................................. 2-4 Verifying Hardware Functionality ............................................................................... 2-5 Connecting the AR400 for Communication ...................................................................... 2-5 Ethernet Connection .................................................................................................. 2-5 RS232 Connection ..................................................................................................... 2-5 Reading Tags ................................................................................................................... 2-7 Chapter 3. Administrator Console Managing the AR400 ....................................................................................................... 3-3 Using the Setup Wizard.................................................................................................... 3-4 Status................................................................................................................................ 3-5 Scan Control ..................................................................................................................... 3-6 Scheduling a Periodic Scan Read Point .................................................................... 3-7 Query .............................................................................................................................. 3-11 Writing a Tag .................................................................................................................. 3-13 Writing Tips .............................................................................................................. 3-14 Filtering ........................................................................................................................... 3-15 Creating a Filter Rule ............................................................................................... 3-15 Read Point Classes ........................................................................................................ 3-21 Read Point Zones ........................................................................................................... 3-22 Adding and Modifying Read Point Zones................................................................. 3-23 Renaming, Enabling, and Disabling the AR400 ............................................................. 3-24 Configuring Individual Read Points.......................................................................... 3-26 Event Notification............................................................................................................ 3-27 Visibility Events ........................................................................................................ 3-27 Threshold Event ....................................................................................................... 3-27 Network Status Event............................................................................................... 3-27 Exception Events ..................................................................................................... 3-27 Selecting Event Notification Options........................................................................ 3-28 Committing / Discarding Changes .................................................................................. 3-30 Managing Trusted Hosts ................................................................................................ 3-31 Managing Users.............................................................................................................. 3-32 User Maintenance .................................................................................................... 3-33 Chapter 4. Maintenance and Troubleshooting Introduction ...................................................................................................................... 4-3 Reader Maintenance - Changing Communication Settings ............................................. 4-3 Setting Date and Time...................................................................................................... 4-5 Getting Firmware Version Number ................................................................................... 4-6 Monitoring Logs ................................................................................................................ 4-8 Backing Up the Configuration........................................................................................... 4-8 Restoring a Configuration................................................................................................. 4-9 Backup / Restore Example....................................................................................... 4-10 Logging Out from the Console........................................................................................ 4-11 Troubleshooting .............................................................................................................. 4-12 Appendix A. Specifications Technical Specifications .................................................................................................. A-3 Cable Pinouts ................................................................................................................... A-5 Ethernet Connections................................................................................................. A-5 RS232 Port Connections............................................................................................ A-5 RS485 Port Connections............................................................................................ A-6 About This Guide Introduction ......................................................................................................................... ix Chapter Descriptions ........................................................................................................... ix Notational Conventions ....................................................................................................... ix Related Documents and Software....................................................................................... ix Service Information...............................................................................................................x Symbol Support Center................................................................................................................x Introduction This Integrator Guide provides information about installing, configuring, and using the AR400 RFID Reader. The AR400 is a multi-protocol RFID reader providing real-time, seamless tag processing for all EPC-compliant tags: Class 0 (Read Only), Class 0 (Read/Write, also known as Class 0+), and Class 1 (Read/Write). Chapter Descriptions Topics covered in this guide are as follows: • • • • • Chapter 1, Getting Started provides an overview of RFID technology and components, and a description of the AR400 Reader and its features. Chapter 2, Installation and Communication provides information on installing the AR400 and setting it up for communication. Chapter 3, Administrator Console describes how to use the web-based Administrator Console to configure and manage the AR400 reader. Chapter 4, Maintenance and Troubleshooting describes how to use the reader maintenance console to perform low-level reader maintenance tasks, and how to upgrade the reader with new firmware and FPGA versions. It also includes troubleshooting tips. Appendix A, Specifications lists the hardware specifications and reader interface details. Notational Conventions The following conventions are used in this document: • • • • Italics are used to highlight the following: • chapters and sections in this and related documents • dialog box, window and screen names • drop-down list and list box names • check box and radio button names • icons on a screen. Bold text is used to highlight the following: • key names on a keypad • button names on a screen. Bullets (•) indicate: • action items • lists of alternatives • lists of required steps that are not necessarily sequential. Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists. Related Documents and Software The following documents provide more information about the AR400 RFID Reader. • AR400 Quick Reference Guide, p/n 72-71774-xx • DC200 Integrator Guide, p/n 72E-71772-01 • RFID API Programmer Guide, p/n 72E-71803-xx • TagVis User Guide, p/n 72E-71804-xx • ReaderComm5DLL Developer Guide, p/n 72E-71805-xx For the latest version of this guide and all guides, go to: http://www.symbol.com/manuals. Service Information If you have a problem with the equipment, contact the Sym for your region. See Sym for contact information. Before calling, have the model number, serial number and several bar code symbols at hand. Call the Support Center from a phone near the scanning equipment so that the service person can try to talk you through the problem. If the equipment is found to be working properly and the problem is symbol readability, the Support Center will request samples of bar codes for analysis at our plant. If the problem cannot be solved over the phone, you may need to return the equipment for servicing. If that is necessary, you will be given specific directions. Symbol Technologies is not responsible for any damages incurred during shipment if the approved shipping container is not used. Shipping the units improperly can possibly void the warranty. If the original shipping container was not kept, contact Symbol to have another sent to you. Symbol Support Center For service information, warranty information or technical assistance contact or call the Symbol Support Center in: United States Symbol Technologies, Inc. One Symbol Plaza Holtsville, New York 11742-1300 1-800-653-5350 Canada Symbol Technologies Canada, Inc. 5180 Orbitor Drive Mississauga, Ontario, Canada L4W 5L9 1-866-416-8545 (Inside Canada) 905-629-7226 (Outside Canada) United Kingdom Symbol Technologies Symbol Place Winnersh Triangle, Berkshire RG41 5TP United Kingdom 0800 328 2424 (Inside UK) +44 118 945 7529 (Outside UK) Asia/Pacific Symbol Technologies Asia, Inc. (Singapore Branch) 230 Victoria Street #05-07/09 Bugis Junction Office Tower Singapore 188024 Tel: +65-6796-9600 Fax: +65-6337-6488 Australia Symbol Technologies Pty. Ltd. 432 St. Kilda Road Melbourne, Victoria 3004 1-800-672-906 (Inside Australia) +61-3-9866-6044 (Outside Australia) Austria/…sterreich Symbol Technologies Austria GmbH Prinz-Eugen Strasse 70 / 2.Haus 1040 Vienna, Austria 01-5055794-0 (Inside Austria) +43-1-5055794-0 (Outside Austria) Denmark/Danmark Symbol Technologies AS Dr. Neergaardsvej 3 2970 Hørsholm 7020-1718 (Inside Denmark) +45-7020-1718 (Outside Denmark) Europe/Mid-East Distributor Operations Contact your local distributor or call +44 118 945 7360 Finland/Suomi Oy Symbol Technologies Kaupintie 8 A 6 FIN-00440 Helsinki, Finland 9 5407 580 (Inside Finland) +358 9 5407 580 (Outside Finland) France Symbol Technologies France Centre d'Affaire d'Antony 3 Rue de la Renaissance 92184 Antony Cedex, France 01-40-96-52-21 (Inside France) +33-1-40-96-52-50 (Outside France) Germany/Deutschland Symbol Technologies GmbH Waldstrasse 66 D-63128 Dietzenbach, Germany 6074-49020 (Inside Germany) +49-6074-49020 (Outside Germany) Italy/Italia Symbol Technologies Italia S.R.L. Via Cristoforo Columbo, 49 20090 Trezzano S/N Navigilo Milano, Italy 2-484441 (Inside Italy) +39-02-484441 (Outside Italy) Latin America Sales Support 2730 University Dr. Coral Springs, FL 33065 USA 1-800-347-0178 (Inside United States) +1-954-255-2610 (Outside United States) 954-340-9454 (Fax) Mexico/MŽxico Symbol Technologies Mexico Ltd. Torre Picasso Boulevard Manuel Avila Camacho No 88 Lomas de Chapultepec CP 11000 Mexico City, DF, Mexico 5-520-1835 (Inside Mexico) +52-5-520-1835 (Outside Mexico) Netherlands/Nederland Symbol Technologies Kerkplein 2, 7051 CX Postbus 24 7050 AA Varsseveld, Netherlands 315-271700 (Inside Netherlands) +31-315-271700 (Outside Netherlands) Norway/Norge Symbol’s registered and mailing address: Symbol Technologies Norway Hoybratenveien 35 C N-1055 OSLO, Norway South Africa Symbol Technologies Africa Inc. Block B2 Rutherford Estate 1 Scott Street Waverly 2090 Johannesburg Republic of South Africa 11-809 5311 (Inside South Africa) +27-11-809 5311 (Outside South Africa) Spain/Espa–a Symbol Technologies S.L. Avenida de Bruselas, 22 Edificio Sauce Alcobendas, Madrid 28108 Spain 91 324 40 00 (Inside Spain) +34 91 324 40 00 (Outside Spain) Fax: +34.91.324.4010 Symbol’s repair depot and shipping address: Symbol Technologies Norway Enebakkveien 123 N-0680 OSLO, Norway +47 2232 4375 Sweden/Sverige “Letter” address: Symbol Technologies AB Box 1354 S-171 26 SOLNA Sweden Visit/shipping address: Symbol Technologies AB Solna StrandvŠg 78 S-171 54 SOLNA Sweden Switchboard: 08 445 29 00 (domestic) Call Center: +46 8 445 29 29 (international) Support E-Mail: Sweden.Support@se.symbol.com If you purchased your Symbol product from a Symbol Business Partner, contact that Business Partner for service. 1 Getting Started Introduction ...................................................................................................................... 1-3 RFID Technology.............................................................................................................. 1-3 RFID Components ..................................................................................................... 1-3 The AR400 RFID Reader ................................................................................................. 1-4 Multiple Connection Options ...................................................................................... 1-4 Flexible Read Point Configurations............................................................................ 1-4 Configuration and Upgrading ..................................................................................... 1-4 Tag Management ....................................................................................................... 1-5 Event Management .................................................................................................... 1-5 Device Management .................................................................................................. 1-5 Security ...................................................................................................................... 1-5 LEDs ................................................................................................................................. 1-6 Introduction The AR400 Reader is a ready-to-connect network element that offers a variety of options for connecting to corporate networks via Ethernet or serial connections. A Setup Wizard facilitates reader configuration. RFID Technology Radio Frequency Identification (RFID) is an advanced automatic identification (Auto ID) technology that uses radio frequency signals to identify “tagged” items. A typical RFID system consists of transponders called tags, readers, and antennas, which function as follows: • • Tags An RFID tag contains a chip that can store a limited amount of data. This data may be pre-encoded or can be encoded in the field. Tags come in a variety of shapes and sizes. A reader sends out radio frequency waves using attached antennas. This RF field powers and charges the tags, which are tuned to receive radio waves. The tags use this power to transmit data back to the reader, which the reader converts to a format for computer storage. The computer application translates the data into an understandable format. RF Wave and Response Physical/Network Connection Reader and Antenna Host Computer Figure 1-1. RFID System Elements RFID Components Symbol’s RFID solutions offer low cost, long read range, and a very high read rate, providing real-time, end-to-end visibility of products and assets in the factory, distribution center, retail outlet, or other facility. A typical Symbol RFID system consists of the following components: • • • Silicon-based RFID tags that can be attached to vehicles, trailers, containers, pallets, boxes, etc. Different types of antennas to support applications such as dock door (area antennas), conveyor and, in the future, Smart Shelf (Shelf Antennas). Readers that power and communicate with the tags for data capture and provide host connectivity for data migration. Tags Tags contain embedded chips that store information unique to the objects to which they are applied. Available in various shapes and sizes, tags, often called transponders, receive and respond to requests for their data. Tags require power to send data, and are available with two power options: • • Active Tags: typically powered by light-weight batteries and have limited life. Passive Tags: powered by the reader’s RF field. Passive tags are much lighter, less expensive, and have a much longer life than active tags. Antennas Antennas transmit and receive radio frequency signals under the control of a reader. Antennas do not perform processing. A read point is the RF range of an antenna. Readers Readers are devices that provide a means for communicating with the tags and transferring their data to a host computer. Readers also provide features such as filtering, parity checks, and tag writing. The AR400 RFID Reader The Symbol AR400 is an intelligent, multi-protocol reader that provides real-time, seamless tag processing for all EPC-compliant tags: Class 0 (Read Only), Class 0 (Read/Write, also known as Class 0+), and Class 1 (Read/Write). Class 0 and Class 1 protocols are run in the Ultra-High Frequency range (~900MHz). Figure 1-2. AR400 Reader, Top and Side Views The AR400 provides a wide range of features that enable implementation of complete, highperformance, and intelligent RFID solutions. Multiple Connection Options The AR400 provides flexibility for connecting to networks via Ethernet or serial connection. Because each AR400 is identified by its unique IP address, it is accessible from anywhere on the network. The AR400 can also be configured to obtain its IP address from a DHCP server, automating the IP address and default Gateway configurations. Flexible Read Point Configurations Connect up to eight antennas (four transmit and four receive) to a single AR400. This decreases the per-read-point cost. Logically combine antennas to create a single, “wide” read point with a much greater range than that of a single antenna. Configuration and Upgrading The AR400 is easy to reconfigure for an application via the Setup Wizard. The AR400 can also accept new firmware and configuration under host control. Tag Management Ad Hoc Querying Use ad hoc querying to send a query about tag visibility. The AR400 replies with either “Tag(s) Visible,” “Not Known” (never seen or imported), or “Not Visible” (previously seen but now missing, with last seen timestamp). Tag Filtering Use tag filtering to apply filters during read operations. A filter can include or exclude a tag based on the specified bit pattern. The AR400 offers two types of filtering: • • Pre-Processing: The AR400 restricts its ability to read tags as directed by the include or exclude filtering specification. Post Processing: The AR400 reads all tags it sees, and applies its filters before it reports these tags to the host computer. Tag List Use the tag list feature to send information about tags from the host to the reader. The host can purge the tag list to remove this information from the reader when it’s not needed. Event Management Event Notification Use event notification to receive notification about certain events. For example, receive immediate notification of a tag visibility change, or bundle all notifications and receive them later. Exception Notification and Heart Beat Notification The AR400 supports sending exception notifications via Simple Network Management Protocol (SNMP). The "heart beat" notification feature sends periodic messages that indicate whether or not the reader is functional. Device Management Quick Backup and Recovery To back up and restore reader configuration, use any Web browser to download the configuration XML file, then download the file to the reader using the Administrator Console. SNMP Integration The AR400 can send real-time notification of specific events and failures to the SNMP server. Security Trusted Hosts The AR400 allows specifying the IP addresses of hosts that are allowed to connect to the reader. Use this security feature to prevent unauthorized network hosts from communicating with the reader. User Level Security The AR400 recognizes three access levels to assign to users: • • • View - view reader configuration settings. Edit - view and edit configuration settings. Maintenance - view and edit configuration settings, and perform administrative tasks such as updating reader firmware. Use this feature to assign different access levels to users, allowing them to perform necessary tasks without compromising security. Logging The AR400 keeps a log of all system-related activities for security and troubleshooting. Use the log, which includes time-stamped system activities such as good and bad tag reads, login attempts, hardware failures, and other events, to pinpoint problems to facilitate quick resolution, and to identify administrators who require additional training to prevent future problems. LEDs The AR400 LEDs indicate reader status as described in LED Indications . Table 1-1. LED Indications LED Description Green Reader is powered on Red Error condition or non-operational mode, e.g., boot-up Yellow Successful tag read 2 Installation and Communication AR400 Physical Connections .......................................................................................... 2-3 Installing the AR400.......................................................................................................... 2-3 Mounting Tips............................................................................................................. 2-3 Mounting the AR400 .................................................................................................. 2-4 Connecting Antennas to the AR400........................................................................... 2-4 Portal Setup ............................................................................................................... 2-4 Powering the AR400 .................................................................................................. 2-4 Verifying Hardware Functionality ............................................................................... 2-5 Connecting the AR400 for Communication ...................................................................... 2-5 Ethernet Connection .................................................................................................. 2-5 RS232 Connection ..................................................................................................... 2-5 Reading Tags ................................................................................................................... 2-7 AR400 Physical LEDs 10/100BaseT Ethernet Antenna/Read Points Connections Control I/O Port RS232 RS422/485 RF Conductors Figure 2-1. AR400 Parts Use only the parts provided with the AR400 reader or recommended by Symbol. Substituting other cables or parts can degrade system performance, damage the AR400, and/or void the warranty. Installing the AR400 Mounting Tips Consider the following before selecting a location for the AR400 reader: • • • • • Mount the AR400 indoors, in operating range, and out of direct sunlight, high moisture, or extreme temperatures. Mount the AR400 in an area free from electromagnetic interference. Sources of interference include generators, pumps, converters, non-interruptible power supplies, AC switching relays, light dimmers, and computer CRT terminals. Mount the AR400 within 15 feet of the antennas. Ensure the AR400’s power cord can reach the power source outlet. Mount the AR400 onto a permanent fixture, such as a wall or a shelf, where it won't be disturbed, bumped, or damaged. Allow a minimum of five inches of clearance on all sides of the AR400. When installing the antenna, ensure a minimum separation distance of 9.1 in (23 cm) between the antenna and human beings. Mounting the AR400 1. Position the AR400 on the wall or shelf, ensuring 5 inches (12.7 cm) of clearance on all sides. 2. Using the pre-drilled holes at the corners of the AR400 as a guide, drill four holes in the wall or shelf for mounting the AR400. 3. Secure the AR400 to the wall or shelf using four 1-inch long #10 screws. Connecting Antennas to the AR400 Power off the AR400 before connecting the antennas. Never disconnect the antennas while the AR400 is powered on or reading tags (when the yellow LED is lit). Doing so can damage the AR400. Do not turn on the antenna ports from a host to which antennas are not connected. 1. Attach the N-Male plug (large end) of an antenna connector cable to antenna 1. 2. Attach the DIN 1.0/2.3 jack connectors (small ends) of the cable to the TX1 and RX1 connectors on the AR400. 3. Secure the cable using wire ties. Do not bend the cable. Repeat these steps to connect antenna 2 to Tx2/Rx2, antenna 3 to TX3/RX3, and antenna 4to TX4/RX4. Portal Setup In portal situations such as dock doors, ensure the TX for an antenna on one side of the portal faces the TX of the opposing antenna. Similarly, ensure the antennas’ respective RXs face each other, as shown in Portal Alignment . Antenna Pair 1 Antenna Pair 2 Figure 2-2. Portal Alignment Powering the AR400 Connect the antennas before supplying power to the AR400. To power on (and off) the AR400: 1. Connect the provided 24 VDC power supply to the AR400’s power port. 2. Plug the power supply into a 24 V power outlet. The green Power LED on the AR400 lights to indicate the AR400 is powered on. 3. To power off the AR400, unplug the power supply from the power outlet. The green Power LED turns off to indicate that the device is powered off and the system is not operational. Do not power off the AR400 until the yellow LED is off, indicating that reads are not in process. Verifying Hardware Functionality Power On Test The red Error LED lights when power is supplied to the AR400, then turns off. The green Power LED lights when the AR400 completes power-up and is operational. Read Test After the AR400 powers up, test the read range to verify that it meets requirements. 1. 2. 3. 4. Enable polling using the Web-based AR400 Administrator Console. See Scan Control on page 3-6. Control the AR400 through a real-time application such as TagVis. Refer to the TagVis User Guide. Present a tag so it is facing the antenna. Walk slowly toward the antenna until the AR400 lights the yellow Read LED to indicate that it detected and read the tag. The distance between the tag and the antenna is the approximate read range. For optimal read results, do not hold the tag at an angle or wave the tag, as this can cause the read distance to vary. Connecting the AR400 for Communication Connect the AR400 to a host or network via Ethernet or RS232. Ethernet Connection The AR400 communicates to the host via a 10/100Base-T Ethernet cable and receives power via a Symbol AC power supply. Ethernet connection allows access to the AR400’s Administrator Console, used to change AR400 settings. To connect the AR400 via Ethernet: 1. Connect the RJ45 Ethernet cable to the 10/100Base-T Ethernet port on the AR400. See AR400 Parts . Ensure the Ethernet cable is terminated according to Table A-2 on page A-5. 2. Plug the other end of the Ethernet cable into the host system’s LAN port. If not connecting to an Ethernet network, connect one end of an Ethernet crossover cable (not provided) to the Ethernet card on the computer, and the other end to the TCP/IP port on the AR400. 3. On a networked computer, open an Internet browser and enter the IP address of the AR400 (the default IP address of the AR400 is 192.168.127.254). The Administrator Console login window appears. 4. Log in to the AR400 Administrator Console. If desired, change settings for the AR400, such as the IP address. See Chapter 3, Administrator Console. RS232 Connection Serial communication allows accessing the AR400’s Administrator Console using terminal software in order to change AR400 settings. Use this method of administration rather than the Web-based method in the following situations: • • • • • When the IP address of the AR400 is unknown. When the AR400 obtains its IP address via DHCP but you need to know the IP address. When crossover cables are not available and you need to change the IP address of the AR400 as per the network's addressing scheme. Other situations when AR400 administration is necessary without connecting to the Web-based Administrator Console. The Web-based Administrator Console is disabled. To connect the AR400 via RS232: 1. Connect a DB9 serial cable to the AR400’s RS232 port. See AR400 Parts. Ensure the cable is terminated according to Table A-3 on page A-5. 2. Plug the other end of the cable into the host computer. 3. On the host computer, launch a terminal emulation program (such as HyperTerminal) and configure it as follows: • Terminal Type: VT-100 • Port: COM 1-4 (depending on the COM port used) • Terminal Settings: • 38400 bps transfer rate • 8 data bits • no parity • 1 stop bit • no flow control • no hardware compression 4. After establishing a connection with the AR400, type AdvancedReaderConsole on the host computer and press Enter. 5. Enter admin as the username and change as the password. These are the default settings. You cannot change the password from the serial console. To change the password (or create a new user account) use the Web-based Administrator Console. The host displays the Current Configuration menu: Current Configuration: Serial Number MAC Address --------- DHCP IP Address IP Port Network Mask Gateway HTTP Server is HTTP Port is RS485 Node Address 10 11 12 ----- Commit Change Discard Change Exit Reboot : redacted : redacted : OFF : 192.168.127.254 : 3000 : 255.255.255.0 : 192.168.1.1 : ON : 80 : 4 13 -- Show system log 14 -- Trace system log : OFF Select the menu number to change the item value: 6. To change a setting, enter the menu number, press Enter, then enter the new configuration value. For example, to change the IP address, enter 2 to select IP Address, then press Enter. Enter a new IP address value. 7. Enter 9, then press Enter, to apply the change. Reading Tags To read tags while communicating with the host serially, connect the AR400’s RS-422/485 interface to a serial port on the host computer. Symbol provides an RS485-to-USB SeaLevel converter box and cable which connects the AR400 to the host's USB port for serial communication. To connect the AR400 to a host computer and read tags in real time, connect through TCP/IP and use a real-time application such as TagVis. Refer to the TagVis Developer Guide, or the user guide provided with the application. Administrator Console Managing the AR400 ....................................................................................................... 3-3 Using the Setup Wizard.................................................................................................... 3-4 Status................................................................................................................................ 3-5 Scan Control ..................................................................................................................... 3-6 Scheduling a Periodic Scan Read Point .................................................................... 3-7 Query .............................................................................................................................. 3-11 Writing a Tag .................................................................................................................. 3-13 Writing Tips .............................................................................................................. 3-14 Filtering ........................................................................................................................... 3-15 Creating a Filter Rule ............................................................................................... 3-15 Read Point Classes ........................................................................................................ 3-21 Read Point Zones ........................................................................................................... 3-22 Adding and Modifying Read Point Zones................................................................. 3-23 Renaming, Enabling, and Disabling the AR400 ............................................................. 3-24 Configuring Individual Read Points.......................................................................... 3-26 Event Notification............................................................................................................ 3-27 Visibility Events ........................................................................................................ 3-27 Threshold Event ....................................................................................................... 3-27 Network Status Event............................................................................................... 3-27 Exception Events ..................................................................................................... 3-27 Selecting Event Notification Options........................................................................ 3-28 Committing / Discarding Changes .................................................................................. 3-30 Managing Trusted Hosts ................................................................................................ 3-31 Managing Users.............................................................................................................. 3-32 User Maintenance .................................................................................................... 3-33 Managing the AR400 The AR400 includes an Administrator Console used to manage and configure the AR400. Use a Web browser on a host computer to access the AR400’s Administrator Console. 1. To access the Administrator Console, enter the IP address of the AR400 in a web browser. The default address is 192.168.127.254. The Console’s login window appears. Figure 3-1. Console Login 2. If this is the first visit to the Console, enter admin in the User Name: field and change in the Password: field. A second window prompts to change the password. Enter and confirm the new password, then click Change. Use this new password for subsequent visits to the Console. The Console’s main menu window appears. Figure 3-2. Console Main Menu Using the Setup Wizard The Setup Wizard provides a simple means of setting up and configuring the AR400 for the first time. Click Help for assistance when using the wizard. To use the wizard for initial configuration, click Setup Wizard (the first item in the menu). Figure 3-3. Initial Setup Wizard Window The Wizard provides windows used to configure the AR400 quickly and easily. To configure specific AR400 settings without using the Wizard, see the following sections. Status Click Status on the Console main menu to view the Reader Status window, which displays information about the AR400 and read points (antennas). Figure 3-4. Reader Status Window Reader Status Window Elements describes the elements in the Reader Status window. Table 3-1. Reader Status Window Elements Item Value Format Description Device Status Summary of the Reader Total Number Number of readers and read points (antennas) connected. Since a single reader is connected to the Administrator Console, for the reader this number is always 1. Enabled Number Total number of readers and read points enabled for reading. Since a single reader is connected to the Administrator Console, for the reader this number is always 1 or 0 (if the reader is disabled). User Disabled Number Number of user-disabled readers and read points. This value is always 1 or 0. For information on how to disable readers, see Renaming, Enabling, and Disabling the AR400 . System Disabled Number Number of system-disabled readers and read points. If a device becomes non-operational, the system disables it, but allows other system components to continue to operate. For the reader this value is always 1 or 0. Parent Disabled Number Devices dependent on a non-operational parent device are marked Parent Disabled. For example, when a reader is systemdisabled, its read points are marked parent disabled. System Clock [Weekday] [Month] [Day of the Month] [Hour:Minute:Second] [Year] Time of the reader system clock. Click on this to change the time of the reader system clock. System Up Time [Number of Days] [Number of Hours] [Number of Minutes] [Number of Seconds] The length of time that the reader has been running. Memory Usage Number of bytes Total amount of device memory, and amount of memory in use and available. Flash Usage Number of bytes Total amount of flash memory, and amount of memory in use and available. Reader Information Automatic Enable Period Minutes After the specified number of minutes the system attempts to enable any degraded device that was system-disabled. Scan Control Click Scan Control on the Console main menu to view the Scan Control window, which allows initiating an on-demand scan and enabling / disabling polled read points. For periodic read points, the window displays when the next scan is scheduled. Figure 3-5. Scan Control Window To initiate a scan for on-demand read points click Initiate Scan. To enable polling for polled read points click Enable Polling. Scheduling a Periodic Scan Read Point To schedule a periodic scan for a read point, modify the read point class setting: 1. Click Read Point Class. Figure 3-6. Read Point Classes Window 2. Enter a name for the read point class in the Class Name: field. 3. Select the antenna type from the Type: drop-down list. Options are AREA (long range), COMBINED (for when operating on portals or areas where multiple read points cover the same space), SHELFv1 (existing short range shelf type), or SHELFv2 (next-generation short range shelf type). 4. In the Scan Period: drop-down list select how often to scan a read point for tags. Options are: • On Demand: Only scan read points when the user initiates a scan request. • Polled: Scan read points continuously. • Periodic: Select the time interval for which to scan read points. 5. In the Gain: drop-down list select the gain (a percentage) to designate the antenna’s power setting for reading RFID tags. 6. Select how many times to repeat the read command when performing a scan from the Retry: dropdown list. 7. Select the type of tags to read from the Air Protocol: drop-down list. Options are CLASS 0, CLASS 1, or ALL. 8. Select a filter from the Tag Selection: drop-down list to specify which tags to read. See Query for information on creating filters. 9. In the Write Gain: drop-down list select the gain (a percentage) to designate the antenna’s power setting for writing RFID tags. 10. Click Add Class. The new class appears in the Class List. 11. Click Commit / Revert. See Committing / Discarding Changes . 12. Click Configuration. The Configuration window displays a list of antennas. Figure 3-7. Reader Configuration Window 13. Select the read point on which to schedule periodic scans. The following window provides details about the read point. Figure 3-8. Read Point Configuration Window 14. Select the new read point class from the Class: drop-down list. This associates the read point with the new read point class, scheduled to perform a scan every 5 minutes. 15. Click Modify Read Point, then Commit/Revert to apply the changes. See Committing / Discarding Changes. 16. Click Scan Control to open the Scan Control window. This window indicates when the next periodic scan is scheduled. Figure 3-9. Reader Scan Control Window Query Use the query feature to read tags and get their status information. The AR400 replies with one of the following tag status indications: • • • The tag is not known to the system. (The tag was never seen or imported.) The tag is not visible to the system. (The tag is known to the system, but is currently not visible to any read point.) The tag is visible at one or more read points. (A list of read points where the tag can be seen displays.) The tag ID and the type of the tag is required to query a tag. To obtain the tag ID and type of all tags the AR400 is reading: 1. Enable polling at the AR400 and configure read point classes as polled classes. 2. Open a new browser window and enter the following URL: http://[Reader IP Address] /cgi-bin/dataProxy?oper=queryTags XML containing the tag ID and type of all tags being read appears. Figure 3-10. Query Tags XML Window 3. Note the tag ID and type of the tag to query. 4. Open the Administrator Console and click Query. Figure 3-11. Tag Query Window 5. Enter the type and ID from Step 3 in the Type: and Id: fields. 6. Click Submit Query. The AR400 responds with the read point of the antenna that is reading the tag. Writing a Tag Use the Write a Tag option to perform the following with a re-writable (R/W) tag: • • • • Write, Erase and/or Lock Tag ID. Write, Erase and/or Lock User Data. Write / Lock kill code. Kill A Tag To write a tag: 1. Click Write a Tag. Figure 3-12. Write an RFID Tag Window 2. Enter the ID to write on the tag in the Tag ID field. If the tag already contains an ID, select the Erase and Write checkboxes next to this field to overwrite it. To disable future changes of the tag ID select the Lock checkbox next to the Tag ID field. 3. Enter the data to write on the tag in the User Data field. If the tag already contains user data select the Erase and Write checkboxes next to this field to overwrite it. To disable future changes of the user data select the Lock checkbox next to this field. 4. To write a kill code, enter six hex digits in the Kill Code field. To lock the kill code select the Write and Lock checkboxes. 5. Select the antenna port to use for the write operation from the Read Point drop-down list. 6. Select whether to write information on a tag or kill a tag from the Action drop-down list. Writing Tips Before writing to tags consider the following tips: • • • Locking a tag ID and/or user data prevents further erasing and writing the tag ID and user data on this tag. After writing and locking the kill code, the kill code is required to kill the tag. Killing a tag voids it for all read and write operations, rendering it useless for future operations. Filtering The AR400 allows setting filters based on rules and then associating the filters with a specific read point. This prevents the AR400 from reporting specific tags. Filtering out tags involves the following steps: • • • • Creating a filter rule Creating a filter and associating it with the rule Associating a filter to a read point class Associating a read point class to an antenna. The following sections describe these processes. Creating a Filter Rule To create a filter rule: 1. Click Tag Selection. Figure 3-13. Tag Selection Filter Window 2. Click Create A New Rule. Figure 3-14. Tag Filter Rule Window 3. Choose the values for specific bits on which to base the filter. 4. Enter a name for the rule in the Filter Rule Name: field. 5. Select an option from the Test Method drop-down list. Inclusive indicates that all tags matching the rule are reported. Exclusive indicates that all tags matching the rule are not reported. 6. Click Add Tag Filter Rule to return to the Tag Selection Filter window. The new rule appears in the Tag Filter Rule List. 7. Enter a name for the filter in the Name: field. 8. Click Create a New Filter. Figure 3-15. Tag Filter Window 9. Select the new rule from the Available Rules list and click <<. The rule moves to the Selected Rules list, adding it to the filter. 10. Click Add/Modify Tag Filter. The Tag Selection Filter window appears with the new filter in the Tag Filter List. 11. Click Commit/Revert to apply the changes. See Committing / Discarding Changes. 12. Click on Read Point Class. Figure 3-16. Read Point Classes Window 13. Enter a class name in the Class Name: field. 14. Select settings for the class from the drop-down lists. See Scheduling a Periodic Scan Read Point for field descriptions. 15. Select the new filter from the Tag Selection drop-down list. 16. Click Add/Modify Class. 17. Click Commit/Revert to apply the changes. See Committing / Discarding Changes. 18. Click Configuration. Figure 3-17. Selecting a Read Point 19. Select the read point with which to associate the new filter. Figure 3-18. Modifying Read Point Configuration 20. Select the new class which contains the new filter from the Class drop-down list. 21. Click Modify Read Point. The Reader Configuration window displays the new read point class associated with the selected antenna. The selected read point of the AR400 now reports tags as per the selected rule. Read Point Classes Read point classes are a set of configuration parameters assigned to one or more read points (antennas). Create a read point class in one of two ways: • • Create a new read point class by defining the class. Use an existing read point class as a template, copy it, change its settings, and save the new class with a different name. The AR400 includes several read point classes to use as templates. To create a new class based on one of the existing classes: 1. Click Read Point Class. Figure 3-19. Creating a New Read Point Class 2. Select a class from the Class List and click Select Class to display the settings of this class. 3. Select settings for the class from the drop-down lists. See Scheduling a Periodic Scan Read Point for field descriptions. 4. Click Add Class. Read Point Zones Read point zones provide a logical way of grouping one or more read points on the same reader or across readers. A read point zone facilitates arbitrary user aggregations of read points. Read Point Zone 1 Tag 1 Read Point 3 Read Point 2 Read Point 1 Tag 2 Tag 3 Read Range of Read Point Zone 1 Tag 4 Read Range of Antenna 3 Figure 3-20. Read Point Zone Diagram In Read Point Zone Diagram Read Point 1 and 2 are logically grouped using Read Point Zone 1. Tags read by either read point are reported as read by Read Point Zone 1. This section describes how to configure and administer read point zones. Adding and Modifying Read Point Zones To create a zone: 1. Click Read Point Zone. Figure 3-21. Read Point Zone Diagram 2. Manage read point zones as follows: • To add a zone, enter a name for the zone in the Zone Name: field and click Add Zone. • To change the name of a zone, select the zone name from the Zone List and click Select Zone. Enter a new name for the zone in the Zone Name: field and click Modify Zone to update the Zone List. • To delete the zone being modified, click Delete Zone. Renaming, Enabling, and Disabling the AR400 Assign a new name and description to the AR400 to use later to identify AR400s on the network. If desired, disable the AR400 for all future operations. To rename or disable an AR400: 1. Click Configuration. Figure 3-22. Reader Configuration Window 2. Select the AR400 to modify. Figure 3-23. Modify Reader Configuration Window 3. To modify the name and description of the AR400, enter this information in the Name: and Description: fields. Note that the serial number cannot be modified. 4. Select the Read Tag User Data checkbox to ensure the AR400 reads user data along with tag IDs. 5. To disable the AR400, select the Disable Reader checkbox. 6. To use the motion detector, select the Use Motion Detector checkbox. 7. Click Modify Reader. Configuring Individual Read Points The Reader Configuration window also allows configuring and managing read points connected to the AR400. To manage an antenna: 1. Select the specific read point from the Reader Configuration window, shown in Reader Configuration Window Figure 3-24. Modify Read Point Configuration Window 2. If desired, enter a new name and description in the Name: and Description: fields. 3. To associate the read point with a class and a read point zone, select an associated read point class and zone from the Class: and Zone: drop-down lists. 4. Click Commit/Revert to save the changes. See Committing / Discarding Changes. Event Notification The AR400 reader provides notification when particular events occur. Select whether to receive event notifications, and select from three different types of events: • • • Visibility events Threshold events Network status events. The Event Notification window provides the following parameters: • • Host Notification: Web-based notifications of events are sent to this link. Typically this is the URL of the Web server which is running an application which can trap and display these notifications. Send SNMP Trap To: This is the IP address of the SNMP server to which to send event traps. Visibility Events These events occur when tag visibility changes. There are three types of visibility events: • • • New tag event: occurs every time the AR400 reads a new tag. Tag not visible event: occurs when the system knows about the tag but the tag is no longer visible. Visibility changed event: a generic event that occurs when the read point that read the tag changes. Threshold Event Threshold events occur when the number of visible tags drops below or rises above a threshold specified via a tag list notification reply. Network Status Event Network status events indicate a change in reader status, e.g., a problem with the AR400. The two types of network status events are Device and Program. Device events can indicate whether the status change is reported for the device or in association with a parent device. For example for a disabled AR400, the AR400 receives a 'user/disable' status notification, and the read point(s) associated with the AR400 receive a 'user/disable/parent' notification. Similarly, if a device fault occurs for the AR400, all corresponding events for the device fault also occur for each read point associated with that AR400. After correcting the fault, enabling the AR400 also enables 'parent disabled' devices associated with it. Exception Events Exception events provide the same type of information available via SNMP, but using XML. An exception event provides information when a device goes off-line, polling is turned off, etc. Select this option if there is no SNMP support, but you require notification if the device/program changes state. Selecting Event Notification Options To select the event notifications to receive: 1. Select Notifications. Figure 3-25. Event Notifications Window 2. Click on the appropriate Notify option for each event type. Figure 3-26. Setting Notify Options 3. In the Notify Option: drop-down list, select one of the following options: • Never: do not provide notification for the event type. • Immediate: provide notification when the event occurs, provided the event is not filtered out. • Moderated: retest this condition every minute up to the timeout value. If the condition still exists and an intervening event has not occurred, provide notification for this event type, if the event is not filtered out 4. If you selected Moderated in the previous step, enter the timeout value in seconds in the Moderated Timeout (seconds): field. 5. Click Set Notify Option. 6. In the main Event Notifications window, click on the appropriate Filter By option for each event type. Figure 3-27. Setting Filter Options 7. Select the type of event filters. Options available are: • None: No filter. All events pass through. • Zone Inclusive: Only events that occur in a specific Read Point Zone pass through. • Class Inclusive: Only events that occur in a specific Read Point Class pass through. • Read Point Inclusive: Only events that occur in a specific Read Point pass through. • Zone Exclusive: Only events that do NOT occur in a specific Read Point Zone pass through. • Class Exclusive: Only events that do NOT occur in a specific Read Point Class pass through. • Read Point Exclusive: Only events that do NOT occur in a specific Read Point pass through. 8. Click Set Filter Option. 9. To receive event notifications, in the main Event Notifications window enter a valid link in the Host Notification Link: field, then click Set Host Link. If this is not set or is not valid, no notifications occur. 10. To receive network status event notifications, in the main Event Notifications window enter a valid link in the Send SNMP Trap To: field. 11. Click an SNMP Version: radio button to select the version of SNMP. 12. Click Set SNMP Configuration. Committing / Discarding Changes To apply reader configuration modifications made using the Administrator Console, click Commit/Revert to save these changes and notify the AR400 to update its configuration file, which updates the AR400 configuration. While a successful update can take several seconds, the system continues to operate with only a one or two-second period where no polling occurs. To save changes when using the Administrator Console: 1. Click Commit/Revert. Figure 3-28. Commit/Revert Window 2. Click Commit to save a new configuration and apply changes to the AR400's configuration file. 3. Click Discard to discard changes made to the reader configuration during this session. 4. Click Revert only if a saved backup configuration exists to discard current changes and revert reader configuration to the backup configuration. Managing Trusted Hosts Trusted hosts are authorized computers with which the AR400 is allowed to communicate. Enable this feature to allow only computers listed in the trusted host list to access the Administrator Console. This allows administrators to restrict unauthorized hosts from accessing the AR400 even if they are on the same network as the AR400. When disabled (the default), the AR400 logs the IP addresses of any computers that attempt to access the AR400 to provide a history of attempted accesses. To manage trusted hosts: 1. Click Trusted Hosts. Figure 3-29. Trusted Hosts Window 2. To add a trusted host to the list, enter the IP address in the IP Address: field, then click Add Host. 3. To delete a trusted host, select the host’s address from the Current Trusted Hosts list, then click Delete Host. 4. Click Enable Trusted Hosts Check to prevent computers not in the trusted host list from accessing the AR400. 5. To allow all hosts in the network to access the AR400, click Disable Trusted Hosts Check. Managing Users To add or modify users in order to grant rights and permissions: 1. Click Manage Users. Figure 3-30. Manage Users Window 2. Enter the name of the new user in the User Name: field. 3. Enter a password to assign to the user in the Password: field. 4. Select an option from the Access Level: drop-down list for the new user: • View: Allows the user to connect to the Administrator Console and view AR400 settings. • Edit: Allows the user to make configuration changes excluding tasks such as updating the firmware. • Maintenance: This provides administrator privileges, and allows the user to access all functionality of the Administrator Console. User Maintenance To modify the access level or other account parameters and settings for an existing user: 1. Click Manage Users. Figure 3-31. Modifying Users Window 2. To assign the default password (change) to a user, select the user from the User List, select the Clear Password radio button, and click Modify User. 3. To delete the user, select the user from the User List, select the Delete User radio button, and click Modify User. 4. To assign a new password to the user, select the user from the User List, select the Change Password radio button, and click Modify User. In the window that appears, enter the old user password, then enter and confirm the new password. 5. To change the access level of the user, select the Set to View Only Access, Set to Edit Access, or Set to Maintenance Access radio button. Note that you can not grant an access level higher than your own. 4 Maintenance and Troubleshooting Introduction ...................................................................................................................... 4-3 Reader Maintenance - Changing Communication Settings ............................................. 4-3 Setting Date and Time...................................................................................................... 4-5 Getting Firmware Version Number ................................................................................... 4-6 Monitoring Logs ................................................................................................................ 4-8 Backing Up the Configuration........................................................................................... 4-8 Restoring a Configuration................................................................................................. 4-9 Backup / Restore Example....................................................................................... 4-10 Logging Out from the Console........................................................................................ 4-11 Troubleshooting .............................................................................................................. 4-12 Introduction Use the maintenance section of the Administrator Console to perform low-level reader maintenance tasks. Reader Maintenance - Changing Communication Settings The AR400 provides typical configuration settings that make the reader a plug-and-play device. The Administrator Console allows customizing these communication parameters. For example, it enables changing the default IP address of the reader when the network does not have a DHCP server. To change the reader’s communication settings: 1. Open a Web browser. 2. In the address bar enter the reader’s URL (http:// followed by the reader’s IP address) and press Enter. 3. Log in using the administrator username and password to access the reader’s Administrator Console. 4. Click Maintenance. 5. Click Communication. Figure 4-1. Communication Configuration Window 6. Change communication-related settings as desired by entering information in the text boxes or using the drop-down lists. See Troubleshooting for descriptions of available options. 7. Click Set TCP/IP Properties or Set Serial Port Properties depending on the configuration. 8. Click Main to return to the Administrator Console main window. 9. Click Commit / Revert to save or discard the changes. See Committing / Discarding Changes on page 3-29. Table 4-1. Communication Configuration Options Setting Description Possible Values Protocol Communication protocol to use for reader communication. RS485 / Disable Data Rate The baud rate to use for serial communication with the reader. 9600/19200/38400/57600/115200/ 230400 Node Address Identifies a station, node, or individual computer on a network. In this case the node address identifies the AR400 on the network. Auto / 0 - 31 Obtain IP Address via DHCP The Dynamic Host Configuration Protocol server running Checked (enabled) / unchecked on networks can assign a dynamic IP address to the (disabled) host and readers. Contact the system administrator to find out if the network supports DHCP. IP Address If manually assigning an IP address to the reader, check IP address to assign to the reader with the system administrator to ensure the IP address is valid in the network. Subnet Mask A mask used to determine to what subnet an IP address Depends on IP address entered belongs. Default Gateway The reader uses this IP address to access another network. Depends on network configuration TCP Port The port used for TCP/IP communication. User-entered Default: 3000 HTTP Port The port used for communication over HTTP. User-entered Default: 80 Setting Date and Time To set the reader’s date and time: 1. Click Maintenance in the main Administrator Console window. 2. Click Date/Time. Figure 4-2. System Time Management Window 3. To synchronize the reader’s clock with a particular SNTP server, enter the server’s address in the SNTP Server Address: field and click Set SNTP Parameters. To set the reader’s system time manually, use the drop-down lists to select units of time, then click Set Date and Time. SNTP (Simple Network Time Protocol) is an Internet standard protocol (built on TCP/IP) that assures accurate synchronization to the millisecond of computer clock times in a network of computers. Getting Firmware Version Number The Version Control window displays the current firmware version and allows upgrading to new firmware. To view this window, click Version. Figure 4-3. Version Control Window See Version Control Fields for descriptions of fields. Table 4-2. Version Control Fields Access Level Setting Description Radio Frequency Regulation Region Select a Radio Frequency Regulation region for the AR400. Image The current image is marked Active. This is the active firmware version the reader is running. Type This indicates the type of image saved in that buffer. ARM indicates firmware for the main processor. Other image types can appear for troubleshooting or maintenance purposes. Version Displays the version number of the image in the format "major number.minor number.build number". Create Time Indicates the image release date. Load Time Indicates when the image was loaded into the reader. Source Indicates the channel from which this image is loaded. Updating Firmware Before downloading the latest firmware from the Symbol FTP Website, perform the following: • • Obtain a valid Default Gateway for the reader, and ensure the reader can access the Internet. Use the Ping Command against the URL ftp2.matrics.com and note the IP address of the server which contains the firmware. To download the firmware from the Symbol Web site: 1. Click Maintenance from the main menu. 2. Click Version. See Version Control Window for the Version Control window. 3. In the FTP Link field, enter the following IP address: ftp://transport.symbol.com followed by /image_file_name. 4. In the FTP User Name field, enter customer 5. In the FTP Password field, enter gen2ldr05 6. Click Download New Firmware. The AR400 updates the image and reboots. Download the FPGA image first if both this image and a firmware image are available. The FPGA does not reboot the AR400; if only updating the FPGA image, reboot the reader after the update. Refer to the log before rebooting to ensure the update was successful. Monitoring Logs Network administrators can use logs for auditing and troubleshooting the AR400. AR400 supports two types of logs: • • System Log - includes the log information generated by the reader's internal instructions. This is a circular queue which can hold a maximum of 200 records. Access History - provides a history log for access to this reader. This log records every successful access to the reader through the Web interface. This is also a circular queue which can hold a maximum of 20 records. Backing Up the Configuration The reader supports the following backup configuration functions: • • • Rolling back maintenance errors and restoring the reader to a particular date and time. Pushing reader-specific changes made to the config.xml file to multiple readers, simplifying multi-reader management. General configuration backup that can be restored when required, such as hardware replacement. To back up the reader's configuration: 1. Open the browser and enter the URL http://[Reader IP address]/Config.xml. For example, if the reader’s IP address is 123.123.123.123, enter: http://123.123.123.123/Config.xml An XML file similar to the following appears, depicting the current reader configuration. Figure 4-4. Sample Reader Configuration XML File 2. Save the XML file with a naming / date convention that facilitates recognizing the reader and the date of the backup. Most browsers allow saving XML files to the hard disk. In Internet Explorer, select File - Save As… 3. Click Save and use Windows Explorer to verify that the file is saved correctly. Restoring a Configuration The restore feature restores a backed-up configuration file to enable quick configuration parameter recovery. This section describes how to restore the backup file on the reader from which it was backed up. For restoring a reader’s backup to another reader, see Restoring Backup Across Readers. Config.xml contains reader-specific configuration parameters such as IP address and port number. To push the same configuration file to multiple readers, make multiple copies of the configuration file and change these reader-specific parameters for each reader in each configuration file using text editing software such as Notepad, before pushing each configuration file to the appropriate reader. To restore backup on the reader from which it was taken and replace non-functional readers with new ones: 1. Copy the backup XML file from the backup folder to a temporary folder on the host PC, and rename the file Config.xml. 2. Load the backup XML file onto an FTP server. If the network connected to the reader has an FTP server, upload the XML file to this server. Consult the administrator for assistance with uploading files onto the FTP server. 3. Connect to the reader using the Web-based Administrator Console. Click Maintenance from the main menu, then Version. Figure 4-5. Version Control Window 4. 5. 6. 7. In the FTP Link field, enter the FTP URL of the server. Enter the username of a user account on the server in the FTP User Name field. Enter the password in the FTP Password field. Click Download New Firmware. A message indicates the XML file is loading. After several minutes, refer to the FTP server log to confirm the download was successful. Backup / Restore Example Following is an example of backing up and restoring a reader’s configuration: 1. Configure the reader. See Reader Maintenance - Changing Communication Settings . The following window shows a sample Reader Configuration window for the reader, which includes the configuration of various read points. Figure 4-6. Sample Reader Configuration Window 2. Backup the configuration file. See Backing Up the Configuration . The following window shows the Config.xml file for this reader, saved to the hard disk, then uploaded to the FTP server. Figure 4-7. Sample Config.xml File 3. Restore the backup Config.xml file. See Restoring a Configuration . The Administrator Console indicates that the reader successfully restored the previous configuration. Logging Out from the Console Before closing the browser, log out of the console. Click Logout from either the maintenance menu or the main menu. If you forget to log out or leave your browser idle, the session automatically logs out. Troubleshooting Table 4-3. Troubleshooting Problem Possible Causes Possible Solutions AR400 error LED lights after the reader The CPU cannot communicate has been in operation. with the DSP and cannot reload the DSP firmware to it. Refer to the system log for error messages. Cannot connect to the reader. Username and password is unknown. The default username is admin and the default password is change. To change the username and password, see Connecting the AR400 for Communication on page 2-5. AR400 is not reading tags. The tag is out of its read range. Move the tag into the read range. See Read Test on page 2-5. Cannot access the Administrator Console. The reader’s IP address is unknown. See Connecting the AR400 for Communication on page 2-5 to view the reader’s IP address. Cannot log in to the terminal-based Administrator Console. The Web-based Administrator Console is in use for that reader. Log out of the Web-based console and restart the terminal software to re-attempt log in. Certain real-time applications are no longer functional. You changed the node Update the settings within the application. Refer to the address, IP address, or other application’s manual. reader configuration parameter(s) using the Administrator Console, and the application expects the previous configuration. Polling is enabled. Some real-time applications require disabling polling. Refer to the application’s manual, and if required, disable polling using the Scan Control feature of the Administrator Console. See Scan Control on page 3-6. The user closed the browser without logging out of the Administrator Console, so other applications cannot connect to the reader. Log out of the Administrator Console. If problems still occur, contact the distributor or call the local Symbol Support Center. See page x for the telephone numbers. A Specifications Technical Specifications .................................................................................................. A-3 Cable Pinouts ................................................................................................................... A-5 Ethernet Connections................................................................................................. A-5 RS232 Port Connections............................................................................................ A-5 RS485 Port Connections............................................................................................ A-6 Technical Specifications The following table summarizes the mobile computer’s intended operating environment and general technical hardware specifications. Table A-1. Technical Specifications Feature Description Physical Specifications Dimensions 8.75" H x 11.75" W x 2" D (22.23 cm H x 29.85 cm W x 5.08 cm D) Weight ~ 6 lbs (2722 g) Base Material Aluminum, Silver; Die-cast LEDs Power (Green), Activity (Yellow), Error (Red) Power +24 vDC @ 1.2 amps Environmental Specifications Environmental Sealing IEC 529 IP54 Operational Temperature IEC 60068-2-1/2/14 32° to +131° F (0° to +55° C) Storage Temperature IEC 60068-2-1/2/14 -4° to +158° F (-20° to +70° C) Humidity EC 60068-30/56 5-95% non-condensing Vibration IEC 60068-2-6 Connectivity Network RS422/485 via RJ45 connector 10/100-BaseT Ethernet via RJ45 connector RS232 console management via DB15 connector. Control I/O Port (6, user programmable) via DB9 connector. RF Conductors 1.0/2.3 DIN Jack Read Points (Channels) 4 read points (transmit and receive). Individual antennas can be combined logically into a single “wide” read point. Compliance Information Safety EMI/RF Emissions Regulatory Region 1, FCC Part 90 Exposure To satisfy FCC RF exposure requirements, a mobile transmitting device must operate with a minimum separation distance of 99 cm or more from a person’s body. Operational Specifications Frequency UHF band, 909.75-921.75 MHz Method Fixed Frequency within the 909.75 to 921.75 band Power Output Up to 30 dBm (1W output into Power amplifier) Air Link Protocol EPC global: Class 0, Class 1, Gen2 Upgradeable and half rate class0 Tag Communication Interleaved Tag Buffering Local Synchronization Network Time Protocol (NTP) IP Addressing Static or dynamic (DHCP) Host Interface Protocol XML or byte stream Network Management Protocol SNMP Configuration Via setup wizard Event Management Auto reported events user controlled thresholds, damping and filtering Administrative Management Security / privilege controls, change tracebility Tag Management ID-based selection ability user defined association to tag IDs Taglist management features for reconciliation and visibility Connectors RJ45 Connector 10/100Base-T Ethernet DB9 Connector RS232 console (management) DB15 Connector Control I/O Port (6 input and 6 output with some programmable control to change the mix) RS422/RS485 Connector Connect to host PC 1.0/2.3 DIN Jack Antenna Connectors Connect to external antennas (4 Transmit and 4 Receive.) Cable Pinouts Ethernet Connections Table A-2. Ethernet Connector: RJ45 10Pin Pin Description Pin 1 Reserved/Do not use Pin 2 TXD (+) Pin 3 TXD (-) Pin 4 RXD (+) Pin 5 Reserved/Do not use Pin 6 Reserved/Do not use Pin 7 RXD (-) Pin 8 Reserved/Do not use Pin 9 Reserved/Do not use Pin 10 Reserved/Do not Use RS232 Port Connections Table A-3. RS232 Connector: RJ45 10-Pin Pin Description Pin 1 +5V Pin 2 Not Used Pin 3 RXD (input) Pin 4 Not Used Pin 5 RTS (output) Pin 6 GND Pin 7 CTS (input) Pin 8 Not Used Pin 9 TXD (output) Pin 10 Not Used RS485 Port Connections Table A-4. RS485 Connector: 10-Pin Pin Description Pin 1 RS-485 (+) Pin 2 RS-485 (+) Pin 3 Reserved Pin 4 Reserved Pin 5 USB PWR Pin 6 USB - Pin 7 USB + Pin 8 RS-485 (-) Pin 9 GND Pin 10 RS-485 (-) Power Amplifier The Symbol technologies RFID part 90-power amplifier is a single stage class AB amplifier with a nominal static drain current bias of 150mA. With the application of full RF input power, the drain current will increase to 3.0A nominally. Power Amplifier Specifications Electrical Specifications Parameter Operating Frequency Min 909.75 Output Power @ 1dB GCP Small Signal Gain@7.5W Third Order Intercept Point measured 500 kHz tone spacing, Pout=4 watt Input/Output VSWR Noise Figure 30 13 +56 Typ 915.25 Max 921.75 Units MHz 16 Watt dB dBm +58 1.2:1 1.5:1 10 dB Harmonics @P1dB GCP Including filter Spurious Signals Operating Voltage Supply Current @ Pout=25 watts (Idcq = 200 mA) -70 dBc -70 24 -60 25.2 dBc Volts Amps Min -40 95 Typ Max +50 +85 Units -400 30,000 Airborne 22.8 Environmental Specifications Parameter Operating Case Temperature Storage Temperature Relative Humidity w/o condensation Altitude Shock & Vibration feet Mechanical Specifications Parameter Value Units Dimensions Weight RF Connectors DC Connectors incl. RFI filters Cooling 8.0 L x 2.25 W x .75 H 14 SMA Female 4 Wire, 22 AWG Inch oz. Limit Max Max External Heatsink Protections Parameter Load VSWR @ 20 watt Value Infinite @ all phase & amplitude for 10 seconds Limits Nom The amplifier is adjusted for maximum gain across the operational band at 7.5W output. It is driven through an external 6 dB pad to add stability. Once the gain has been tested and set, the driving source, the Symbol Technologies Inc. AR400 output is set to a level, which results in less then the FCC limit of 30 Watts ERP field strength from the antenna at the frequency of highest gain from the amplifier. Block Diagram of AR400 with power amplifier: System Block Diagram AR400 (RFID Reader) Tx Rx dB pad PA 20 Ft Cable Filter 20 Ft Cable CP Antenna (R) CP Antenna (L)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 76 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:a57a7c69-60f7-4d2b-8a7c-788175a85a88 Producer : Acrobat Distiller 6.0.1 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Modify Date : 2005:05:20 13:15:44-04:00 Create Date : 2005:05:20 13:15:44-04:00 Document ID : uuid:3cb7ec3e-e26c-4b19-a5f0-c569e90e6536 Format : application/pdf Title : Microsoft Word - AR400_UserManual.rtf Creator : jpfeifer Author : jpfeiferEXIF Metadata provided by EXIF.tools